[LinuxBIOS] New Target for LinuxBios MB1030 / 3036

[Christian Sühs]

> PCI: 00:13.0 init
> Devices initialized
> Copying IRQ routing tables to 0xf0000...done.
> Verifing copy of IRQ routing tables at 0xf0000...failed

What could be a reason for that?

> Moving GDT to 0x500...ok
> Wrote linuxbios table at: 00000530 - 000006c4  checksum a262
> 
> Welcome to elfboot, the open sourced starter.
> January 2002, Eric Biederman.

...

> Loading Segment: addr: 0x0000000000100000 memsz: 0x0000000000023d00 filesz: 0x0000000000009c68
> Clearing Segment: addr: 0x0000000000109c68 memsz: 0x000000000001a098
> Loading Segment: addr: 0x0000000000123d00 memsz: 0x0000000000000048 filesz: 0x0000000000000048
> Jumping to boot code at 0x1078c4

Filo tries first to init vga and serial, disabling vga makes no 
different, it fails too.

Serial needs an IRQ, right?

Is there any callback from filo to LB?
Needs filo the LB Irq Table on 0xf0000 to initialise?

chris