[LinuxBIOS] Epia ML 5000 VGA (Again!) -- Moving backwards, somehow.

Eric Poulsen eric at zyxod.com
Sun Apr 30 07:40:57 CEST 2006 

I've been trying to accomplish several things:

1) LB on Via Epia ML 5000
2) VGA working
3) Figuring out weird boot errors that seem to be "fixed" by the factory 
BIOS.  Running memtest86+ under LB.

I _was_ on step 3, but in the course of events, I went back to step 2.  
VGA is now NOT working again, but with a different error; see below.

Since I was messing around with making an ML tree, adding a bit of 
custom stuff, and removing initializations for devices that don't exist 
on the ML (floppy, CF reader), I figured I had done something wrong.

Soooo, I went back to the "stock" LinuxBIOSv2, revision 2100, known to 
work with the Epia M.  This particular revision worked for me, albeit 
with the long delay at the beginning because of the firewire search.

Essentially, whenever, I add ...

    #VGA Console
    option CONFIG_CONSOLE_VGA=1
    option CONFIG_PCI_ROM_RUN=1

... to the Config.lb, it doesn't work, giving the error below.

Mysteriously, my "weird boot crashes that are fixed by factory CMOS" 
problems aren't exhibiting themselves.

Unfortunately, I cannot run memtest86 under LB without VGA.

Any ideas?

--------------------------------------------------------------------

0

LinuxBIOS-1.1.8.0Fallback Sat Apr 29 22:12:48 PDT 2006 starting...
 Enabling mainboard devices
 Enabling shadow ram
vt8623 init starting
Detecting Memory
Number of Banks 04
Number of Rows 0d
Priamry DRAM width08
No Columns 0a
MA type e0
Bank 0 (*16 Mb) 10
No Physical Banks 01
Total Memory (*16 Mb) 10
CAS Supported 2 2.5 3
Cycle time at CL X     (nS)50
Cycle time at CL X-0.5 (nS)60
Cycle time at CL X-1   (nS)75
Starting at CAS 3
We can do CAS 2.5
We can do CAS 2
tRP 48
tRCD 48
tRAS 28
Low Bond 00  High Bondbe  Setting DQS delay7evt8623 done
00:06 11 23 31 06 00 30 22 00 00 00 06 00 00 00 00
10:08 00 00 d0 00 00 00 00 00 00 00 00 00 00 00 00
20:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30:00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00
40:00 18 88 80 82 44 00 00 18 99 88 80 82 44 00 00
50:c8 de cf 88 e0 07 00 00 e0 00 10 10 10 10 00 00
60:02 ff 00 30 d6 32 01 2a 42 2d 43 58 00 44 00 00
70:82 48 00 01 01 08 50 00 01 00 00 00 00 00 00 02
80:0f 65 00 00 80 00 00 00 02 00 00 00 00 00 00 00
90:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0:02 c0 20 00 07 02 00 1f 04 00 00 00 2f 02 04 00
b0:00 00 00 00 80 00 00 00 88 00 00 00 00 00 00 00
c0:01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
d0:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0:00 dd 00 00 00 00 01 00 40 00 00 00 00 00 00 00
f0:00 00 00 00 00 00 12 13 00 00 00 00 00 00 00 00
AGP
 Doing MTRR init.
Copying LinuxBIOS to ram.
Jumping to LinuxBIOS.
LinuxBIOS-1.1.8.0Fallback Sat Apr 29 22:12:48 PDT 2006 booting...
clocks_per_usec: 838
Enumerating buses...
Finding PCI configuration type.
PCI: Using configuration type 1
PCI_DOMAIN: 0000 enabled
APIC_CLUSTER: 0 enabled
PCI: pci_scan_bus for bus 0
PCI: 00:00.0 [1106/3123] enabled
PCI: 00:01.0 [1106/b091] enabled
Disabling static device: PCI: 00:0a.0
Disabling static device: PCI: 00:0a.1
In vt8235_enable 1106 3038.
PCI: 00:10.0 [1106/3038] enabled
In vt8235_enable 1106 3038.
PCI: 00:10.1 [1106/3038] enabled
In vt8235_enable 1106 3038.
PCI: 00:10.2 [1106/3038] enabled
In vt8235_enable 1106 3104.
PCI: 00:10.3 [1106/3104] enabled
In vt8235_enable 1106 3177.
Initialising Devices
PCI: 00:11.0 [1106/3177] enabled
In vt8235_enable 1106 0571.
PCI: 00:11.1 [1106/0571] enabled
In vt8235_enable 1106 3059.
PCI: 00:11.5 [1106/3059] enabled
In vt8235_enable ffff ffff.
In vt8235_enable 1106 3065.
PCI: 00:12.0 [1106/3065] enabled
PCI: pci_scan_bus for bus 1
PCI: 01:00.0 [1106/3122] enabled
PCI: pci_scan_bus returning with max=01
vt1211 enabling PNP devices.
PNP: 002e.0 enabled
vt1211 enabling PNP devices.
PNP: 002e.1 enabled
vt1211 enabling PNP devices.
PNP: 002e.2 enabled
vt1211 enabling PNP devices.
PNP: 002e.3 enabled
vt1211 enabling PNP devices.
PNP: 002e.b enabled
PCI: pci_scan_bus returning with max=01
done
Allocating resources...
Reading resources...
Done reading resources.
Allocating VGA resource PCI: 01:00.0
Setting PCI_BRIDGE_CTL_VGA for bridge PCI: 00:01.0
Setting PCI_BRIDGE_CTL_VGA for bridge PCI_DOMAIN: 0000
Setting PCI_BRIDGE_CTL_VGA for bridge Root Device
Setting resources...
I would set ram size to 0x40000 Kbytes
PCI: 00:10.0 20 <- [0x0000001800 - 0x000000181f] io
PCI: 00:10.1 20 <- [0x0000001820 - 0x000000183f] io
PCI: 00:10.2 20 <- [0x0000001840 - 0x000000185f] io
PCI: 00:10.3 10 <- [0x00febff000 - 0x00febff0ff] mem
PNP: 002e.0 60 <- [0x00000003f0 - 0x00000003f7] io
PNP: 002e.0 70 <- [0x0000000006 - 0x0000000006] irq
PNP: 002e.0 74 <- [0x0000000002 - 0x0000000002] drq
PNP: 002e.1 60 <- [0x0000000378 - 0x000000037f] io
PNP: 002e.1 70 <- [0x0000000007 - 0x0000000007] irq
PNP: 002e.1 74 <- [0x0000000003 - 0x0000000003] drq
PNP: 002e.2 60 <- [0x00000003f8 - 0x00000003ff] io
PNP: 002e.2 70 <- [0x0000000004 - 0x0000000004] irq
PNP: 002e.3 60 <- [0x00000002f8 - 0x00000002ff] io
PNP: 002e.3 70 <- [0x0000000003 - 0x0000000003] irq
PNP: 002e.b 60 <- [0x000000ec00 - 0x000000ecff] io
PCI: 00:11.1 20 <- [0x0000001860 - 0x000000186f] io
PCI: 00:11.5 10 <- [0x0000001000 - 0x00000010ff] io
PCI: 00:12.0 10 <- [0x0000001400 - 0x00000014ff] io
PCI: 00:12.0 14 <- [0x00fec00000 - 0x00fec000ff] mem
Done setting resources.
Done allocating resources.
Enabling resourcess...
PCI: 00:00.0 cmd <- 146
PCI: 00:01.0 bridge ctrl <- 000f
PCI: 00:01.0 cmd <- 147
PCI: 01:00.0 cmd <- 143
PCI: 00:10.0 subsystem <- 00/00
PCI: 00:10.0 cmd <- 141
PCI: 00:10.1 subsystem <- 00/00
PCI: 00:10.1 cmd <- 141
PCI: 00:10.2 subsystem <- 00/00
PCI: 00:10.2 cmd <- 141
PCI: 00:10.3 subsystem <- 00/00
PCI: 00:10.3 cmd <- 142
PCI: 00:11.0 cmd <- 147
PNP: 002e.0 - enabling
PNP: 002e.1 - enabling
PNP: 002e.2 - enabling
PNP: 002e.3 - enabling
PNP: 002e.b - enabling
PCI: 00:11.1 cmd <- 147
PCI: 00:11.5 subsystem <- 00/00
PCI: 00:11.5 cmd <- 141
PCI: 00:12.0 cmd <- 1c3
done.
Initializing devices...
Root Device init
PCI: 00:10.0 init
PCI: 00:10.1 init
PCI: 00:10.2 init
PCI: 00:10.3 init
PCI: 00:11.0 init
vt8235 init
RTC Init
Invalid CMOS LB checksum
pci_routing_fixup: dev is 0001ad40
setting firewire
setting usb
Assigning IRQ 5 to 0:10.0
  Readback = 5
pci_level_irq: lower order bits are wrong: want 0x0, got 0x20
Assigning IRQ 9 to 0:10.1
  Readback = 9
pci_level_irq: lower order bits are wrong: want 0x0, got 0x20
Assigning IRQ 9 to 0:10.2
  Readback = 9
pci_level_irq: lower order bits are wrong: want 0x0, got 0x20
Assigning IRQ 5 to 0:10.3
  Readback = 5
pci_level_irq: lower order bits are wrong: want 0x0, got 0x20
setting vt8235
Assigning IRQ 5 to 0:11.1
  Readback = 5
pci_level_irq: lower order bits are wrong: want 0x0, got 0x20
Assigning IRQ 9 to 0:11.5
  Readback = 9
pci_level_irq: lower order bits are wrong: want 0x0, got 0x20
setting ethernet
Assigning IRQ 5 to 0:12.0
  Readback = 5
pci_level_irq: lower order bits are wrong: want 0x0, got 0x20
setting vga
Assigning IRQ 5 to 1:0.0
  Readback = 5
pci_level_irq: lower order bits are wrong: want 0x0, got 0x20
setting pci slot
setting cardbus slot
setting riser slot
PNP: 002e.0 init
PNP: 002e.1 init
PNP: 002e.2 init
PNP: 002e.3 init
PNP: 002e.b init
PCI: 00:11.1 init
Enabling VIA IDE.
ide_init: enabling compatibility IDE addresses
enables in reg 0x42 0x0
enables in reg 0x42 read back as 0x0
enables in reg 0x40 0x13
enables in reg 0x40 read back as 0x13
enables in reg 0x9 0x8a
enables in reg 0x9 read back as 0x8a
command in reg 0x4 0x7
command in reg 0x4 reads back as 0x7
PCI: 00:11.5 init
PCI: 00:12.0 init
Configuring VIA Rhine LAN
APIC_CLUSTER: 0 init
Initializing CPU #0
CPU: vendor Centaur device 673
Enabling cache

Setting fixed MTRRs(0-88) type: UC
Setting fixed MTRRs(0-16) Type: WB
Setting fixed MTRRs(24-88) Type: WB
DONE fixed MTRRs
Setting variable MTRR 0, base:    0MB, range:  128MB, type WB
Setting variable MTRR 1, base:  128MB, range:   64MB, type WB
Setting variable MTRR 2, base:  192MB, range:   32MB, type WB
DONE variable MTRRs
Clear out the extra MTRR's

MTRR check
Fixed MTRRs   : Enabled
Variable MTRRs: Enabled

Disabling local apic...done.
CPU #0 Initialized
PCI: 00:00.0 init
VT8623 random fixup ...
Frame buffer at d0000000
PCI: 00:01.0 init
VT8623 AGP random fixup ...
PCI: 01:00.0 init
VGA random fixup ...
INSTALL REAL-MODE IDT
DO THE VGA BIOS
found VGA: vid=1106, did=3122
rom base, size: fffc0000
write_protect_vgabios
bus/devfn = 0x100
Unexpected Exception: 13 @ 10:000121c3 - Halting
Code: 0 eflags: 00010012
eax: 00000012 ebx: 00024530 ecx: 00023fa8 edx: 00000012
edi: 00018a90 esi: ffff946b ebp: 00023f84 esp: 00023f84

More information about the coreboot mailing list