[LinuxBIOS] Linuxbios on epia motherboard

Uwe Hermann uwe at hermann-uwe.de
Sat Dec 9 00:32:09 CET 2006


On Fri, Dec 08, 2006 at 03:59:35PM +0000, Kurt André Selbach wrote:
> On my epia-ml everything seems to work except the vgabios and
> /dev/ttyS1 the internal rs232 port.
> 
> It(ttyS1) works flawlessly on stock bios,

Did you test that using minicom with 115200 Baud, 8N1?


> and kernel recognizes it on
> bootup (checked via dmesg) exactly identically on both stock and
> linuxbios, since my epia doesnt like usb hubs, and i've ran out of usb
> ports i'd like to get the seconds rs232 port working within linuxbios,
> and hints/tips are welcome.

I'm just guessing, but try to look at src/mainboard/via/epia-m/*.lb
and src/superio/via/vt1211/vt1211.c. Either LinuxBIOS is simply not
configured to enable ttyS1, or the code isn't there or incomplete or
wrong (?)

Maybe it's even simpler? Did you attach the cable to the correct port?
Did you configure minicom to use ttyS1 instead of ttyS0? Etc. etc.


Uwe.
-- 
http://www.hermann-uwe.de  | http://www.holsham-traders.de
http://www.crazy-hacks.org | http://www.unmaintained-free-software.org
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 189 bytes
Desc: Digital signature
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20061209/30d7fc5e/attachment.sig>


More information about the coreboot mailing list