[LinuxBIOS] Build issue for khepri target
Stefan Reinauer
stepan at coresystems.de
Tue Jul 18 20:38:03 CEST 2006
what does "platform get console" tell you?
It should say something like:
$ platform get console
Rear Panel Enabled Speed Pruning Log Trigger
SP Console Yes 19200 No 244 KB
^^^^^^^^^^^^^^^^^^
You need to configure the
console on the SP with the "platform set console" command.
platform set console {--serial|-s} sp [{{--enable|-e}|{--disable|-d}}] [{{--prune|-p}|{--noprune|-n}}]
[{--speed|-S} {1200|2400|4800|9600|19200|38400|57600|115200}] [{--log|-l} size] [{-h|--help}]
or
platform set console {--serial|-s} platform [{-h|--help}]
{-S|--speed} {1200|2400|4800|9600|19200|38400|57600|115200}
Select the port speed for the platform console.
BIOS, the platform OS and the console must
all be configured for the same speed
Cannot be used with: -s=platform
{-d|--disable} Indicate that the platform console monitor is
inactive
Cannot be used with: -e -s=platform
{-e|--enable} Indicate that the platform console monitor is active
Cannot be used with: -d -s=platform
{-p|--prune} Indicate that the platform console log is to be
cleaned of ANSI sequences and pruned of
duplicated information
Cannot be used with: -n -s=platform
{-s|--serial} {sp|platform}
Specify whether the serial port is connected to the
platform COMA port, or the SP serial console
Cannot be used with: -e [platform] -d [platform] -p
[platform] -n [platform] -S [platform] -l [platform]
* Anil B G <bg.anil at gmail.com> [060718 19:14]:
> Hi Stefan,
> I logged into the SP and tried platform console etc. but I was not really
> sure how that would help me.
> That would only change the settings of the Linux thats loaded and on a reboot
> the PPCboot would again spew messages on the serial.
> I guess I am missing something here, but cannot really visualise how to get the
> output of LinuxBIOS on the serial.
> One way perhaps would be to disable the SP at the hardware level (if that is
> possible).
>
> Please let me know if it is possible to disable serial by trying "platform
> console" on the SP.
>
> Regards
> Anil
>
>
> On 7/17/06, Stefan Reinauer <stepan at coresystems.de> wrote:
>
> * Anil B G <bg.anil at gmail.com> [060717 17:07]:
> > Hi,
> > I only get the output of the SP on the serial interface.
>
> log in to the sp and do "platform console"
>
>
> --
> coresystems GmbH Brahmsstr. 16 D-79104 Freiburg i. Br.
> Tel.: +49 761 7668825 Fax: +49 761 7664613
> Email: info at coresystems.de http://www.coresystems.de/
>
>
--
coresystems GmbH • Brahmsstr. 16 • D-79104 Freiburg i. Br.
Tel.: +49 761 7668825 • Fax: +49 761 7664613
Email: info at coresystems.de • http://www.coresystems.de/
More information about the coreboot
mailing list