[LinuxBIOS] COM2 in tyan/s2881

[Stefan Reinauer]

* Ward Vandewege <ward at gnu.org> [060517 00:36]:
> On Tue, May 16, 2006 at 03:09:44PM -0700, Lu, Yinghai wrote:
> > Good.
> > 
> > That will make you boot time longer. Because the com2 only need to set
> > to 19200.
> 
> That is correct. But it will only make the boot time longer when using com2,
> right? Not just when it's enabled. And reducing the verbosity of linuxbios
> and the kernel at startup should remove most of the slowdown...

Right. If the hardware is physically there onboard it should be enabled
per default. 

Stefan.

-- 
coresystems GmbH • Brahmsstr. 16 • D-79104 Freiburg i. Br.
      Tel.: +49 761 7668825 • Fax: +49 761 7664613
Email: info at coresystems.de  • http://www.coresystems.de/