[LinuxBIOS] Fwd: Hello, I have a problem to put the linuxbios on my mainboard ms6163.

[Li Haiqiang]

I write the 'ls -xxx' results  to the  PCI  config registers.
Can it work? 



----- Original Message ----
From: Richard Smith <smithbone at gmail.com>
To: Li Haiqiang <haiqiang2linux at yahoo.com>
Cc: LinuxBIOS mailinglist <linuxbios at linuxbios.org>
Sent: Monday, November 6, 2006 12:25:38 PM
Subject: Re: [LinuxBIOS] Fwd:  Hello, I have a problem to put the linuxbios on my mainboard ms6163.

Li Haiqiang wrote:

> What does debug code 0xf9 mean?
> It stopped here.

Li,

The 440bx is NOT COMPLETE.  It will NOT function.  It is BROKEN. The
port is not finished.  Its does not enable RAM.

Hopefully, one of those translates correctly.  Do you understand?

To make it work you need to add a lot of code.  My earlier email talks
about the necessary steps to get 440bx into a working shape.

-- 
Richard A. Smith






-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20061105/c7a429f4/attachment.html>