[LinuxBIOS] Via epia-m2 difficulties

[Al Boldi]

Kurt André Selbach wrote:
> Thanks, for the answers, i managed to get the vgabios running when i
> inserted the extracted vgabios (from awardeco) and inserted it with
> the dd command.
>
> My next problem is trying to boot from my usb device using FILO version
> 0.5 from this "link" svn://openbios.org/filo/trunk/filo-0.5
>
> "FILO version 0.5 (root at powertron) Fri Nov 10 02:05:10 CET 2006
> Press <Enter> for default boot, or <Esc> for boot prompt... 1mlinuz
> root=/dev/sda1 console=tty0 console=ttyS0nd UHCI at 1800
> uhc_reset: Resetting UHCI
> uhc_init: uhc_init setting framelist to: 1decb9f0
> uhc_start: Starting UHCI
> dump_uhci: HCI at 00001800
> uhc_init: Found UHCI at 1820
> uhc_reset: Resetting UHCI"
>
> The computer now "hangs" no boot nothing.
>
> Using the filo from ehterboot, it get's to the "LinuxLabs USB
> bootloader" and that's as far as it goes.
>
> Stock award bios managed to boot from this usbstick,
> What could be wrong, any suggestions?!

yhlu once pointed me to this http://www.linuxbios.org/index.php/Etherboot


Thanks!

--
Al