[LinuxBIOS] Tyan s2892 the OLPC way

[Lu, Yinghai]

You kernel command line may need to include "apic" to enable the apic
mode.

 

YH

 

________________________________

From: linuxbios-bounces at linuxbios.org
[mailto:linuxbios-bounces at linuxbios.org] On Behalf Of Myles Watson
Sent: Friday, October 13, 2006 9:42 AM
To: linuxbios at linuxbios.org
Subject: [LinuxBIOS] Tyan s2892 the OLPC way

 

Pointers?

 

I've used OLPC buildrom as a base, customized the kernel to include the
SATA drivers, IDE, EXT2, EXT3. I removed the boot menu and successfully
boot into a shell with pciutils.

 

I can't mount my IDE hard drive, even though I can see it in the /proc
filesystem.  I'm trying mount -t ext3 /dev/hda1 /hdd.  

 

When I do an lspci, all the IRQs are routed to IRQ 0.  I don't know if
this is the root of the problem, or a symptom.

 

How can I make sure that the PCI settings that I set up in LinuxBIOS get
passed on?

 

Thanks,

Myles

 

An unrelated note for those that are into OLPC: in linuxrc two of the
device files get made as text files because they are not there early
enough in the process

 

/sbin/makedevs /dev < device.txt > /dev/null 

is bad because it creates a text file where /dev/null should be. 

 

The same thing happens to /dev/console in a different place.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20061013/541029be/attachment.html>