[LinuxBIOS] filo ide speedup patch!

Ward Vandewege ward at gnu.org
Tue Apr 3 23:43:30 CEST 2007


On Sat, Mar 31, 2007 at 05:12:32AM +0200, Peter Stuge wrote:
> On Mon, Mar 26, 2007 at 03:42:08AM +0200, Peter Stuge wrote:
> > I've added debugging output with this patch, please test this patch
> > with DEBUG_BLOCKDEV, DEBUG_IDE and DEBUG_EXT2 (or DEBUG_ALL) set so
> > I can get more details.
> 
> Ping.

See the attached boot log.

Thanks,
Ward.

-- 
Ward Vandewege <ward at fsf.org>
Free Software Foundation - Senior System Administrator
-------------- next part --------------
INIT detected from  --- {  APICID = 00 NODEID = 00 COREID = 00} ---

Issuing SOFT_RESET...


LinuxBIOS-2.0.0_m57sli_Fallback Tue Apr  3 17:34:26 EDT 2007 starting...
*sysinfo range: [000cf000,000cf730)
bsp_apicid=00
core0 started: 
started ap apicid:  01
SBLink=00
NC node|link=00
begin msr fid, vid 310a120a0a0c020c
end   msr fid, vid 310a120a0a0c020c
mcp55_num:01
Ram1.00
Ram2.00
Unbuffered
400Mhz
Interleaved
RAM: 0x00200000 KB
Ram3
	dimm_mask = 00000011
	x4_mask = 00000000
	x16_mask = 00000000
	single_rank_mask = 00000000
	ODC = 00113222
	Addr Timing= 00202520
Initializing memory:  done
Setting variable MTRR 2, base:    0MB, range: 2048MB, type WB
set DQS timing:RcvrEn:Pass1: 00 CTLRMaxDelay=1a done
set DQS timing:DQSPos: 00 done
set DQS timing:RcvrEn:Pass2: 00 CTLRMaxDelay=2c done
Total DQS Training : tsc [00]=00000000322adb2c
Total DQS Training : tsc [01]=000000003373fbbf
Total DQS Training : tsc [02]=000000009c69548f
Total DQS Training : tsc [03]=000000009d823787
Ram4
v_esp=000cee20
testx = 5a5a5a5a
Copying data from cache to RAM -- switching to use RAM as stack... Done
testx = 5a5a5a5a
Disabling cache as ram now 
Clearing initial memory region: Done
Copying LinuxBIOS to RAM.
src=fffdf000
dst=00100000
linxbios_ram.nrv2b length = 0000d2f2
linxbios_ram.bin   length = 00021830
Jumping to LinuxBIOS.
LinuxBIOS-2.0.0_m57sli_Fallback Tue Apr  3 17:34:26 EDT 2007 booting...
Enumerating buses...
APIC_CLUSTER: 0 enabled
PCI_DOMAIN: 0000 enabled
  PCI: 00:18.3 siblings=1
CPU: APIC: 00 enabled
CPU: APIC: 01 enabled
PCI: pci_scan_bus for bus 00
PCI: 00:18.0 [1022/1100] enabled
PCI: 00:18.1 [1022/1101] enabled
PCI: 00:18.2 [1022/1102] enabled
PCI: 00:18.3 [1022/1103] enabled
PCI: 00:00.0 [10de/0369] enabled
PCI: 00:00.0 [10de/0369] enabled next_unitid: 0010
PCI: pci_scan_bus for bus 00
PCI: 00:00.0 [10de/0369] enabled
PCI: 00:01.0 [10de/0360] enabled
PCI: 00:01.1 [10de/0368] enabled
PCI: 00:01.2 [10de/036a] enabled
PCI: 00:01.3 [10de/036b] enabled
PCI: 00:02.0 [10de/036c] enabled
PCI: 00:02.1 [10de/036d] enabled
PCI: 00:04.0 [10de/036e] enabled
PCI: 00:05.0 [10de/037f] enabled
PCI: 00:05.1 [10de/037f] enabled
PCI: 00:05.2 [10de/037f] enabled
PCI: 00:06.0 [10de/0370] enabled
PCI: 00:06.1 [10de/0371] enabled
PCI: 00:08.0 [10de/0373] enabled
PCI: 00:0a.0 [10de/0376] enabled
PCI: 00:0b.0 [10de/0374] enabled
PCI: 00:0c.0 [10de/0374] enabled
PCI: 00:0d.0 [10de/0378] enabled
PCI: 00:0e.0 [10de/0375] enabled
PCI: 00:0f.0 [10de/0377] enabled
PNP: 002e.0 disabled
PNP: 002e.1 enabled
PNP: 002e.2 disabled
PNP: 002e.3 disabled
PNP: 002e.4 disabled
PNP: 002e.5 enabled
PNP: 002e.6 enabled
PNP: 002e.8 disabled
PNP: 002e.9 disabled
PNP: 002e.a disabled
smbus: PCI: 00:01.1[0]->I2C: 01:50 enabled
smbus: PCI: 00:01.1[0]->I2C: 01:51 enabled
smbus: PCI: 00:01.1[0]->I2C: 01:52 enabled
smbus: PCI: 00:01.1[0]->I2C: 01:53 enabled
smbus: PCI: 00:01.1[0]->I2C: 01:54 enabled
smbus: PCI: 00:01.1[0]->I2C: 01:55 enabled
smbus: PCI: 00:01.1[0]->I2C: 01:56 enabled
smbus: PCI: 00:01.1[0]->I2C: 01:57 enabled
smbus: PCI: 00:01.1[1]->I2C: 02:51 enabled
PCI: pci_scan_bus for bus 01
PCI: pci_scan_bus returning with max=001
PCI: pci_scan_bus for bus 02
PCI: 02:00.0 [10de/0392] enabled
PCI: pci_scan_bus returning with max=002
PCI: pci_scan_bus for bus 03
PCI: pci_scan_bus returning with max=003
PCI: pci_scan_bus for bus 04
PCI: pci_scan_bus returning with max=004
PCI: pci_scan_bus for bus 05
PCI: pci_scan_bus returning with max=005
PCI: pci_scan_bus for bus 06
PCI: pci_scan_bus returning with max=006
PCI: pci_scan_bus for bus 07
PCI: pci_scan_bus returning with max=007
PCI: pci_scan_bus returning with max=007
PCI: pci_scan_bus returning with max=007
done
Allocating resources...
Reading resources...
PCI: 00:06.0 1c <- [0x000000f000 - 0x000000efff] bus 01 io
PCI: 00:06.0 24 <- [0x00fff00000 - 0x00ffefffff] bus 01 prefmem
PCI: 00:06.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 01 mem
PCI: 00:0b.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 03 io
PCI: 00:0b.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 03 prefmem
PCI: 00:0b.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 03 mem
PCI: 00:0c.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 04 io
PCI: 00:0c.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 04 prefmem
PCI: 00:0c.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 04 mem
PCI: 00:0d.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 05 io
PCI: 00:0d.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 05 prefmem
PCI: 00:0d.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 05 mem
PCI: 00:0e.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 06 io
PCI: 00:0e.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 06 prefmem
PCI: 00:0e.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 06 mem
PCI: 00:0f.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 07 io
PCI: 00:0f.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 07 prefmem
PCI: 00:0f.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 07 mem
Done reading resources.
Allocating VGA resource PCI: 02:00.0
Setting PCI_BRIDGE_CTL_VGA for bridge PCI: 00:0a.0
Setting PCI_BRIDGE_CTL_VGA for bridge PCI: 00:18.0
Setting PCI_BRIDGE_CTL_VGA for bridge PCI_DOMAIN: 0000
Setting PCI_BRIDGE_CTL_VGA for bridge Root Device
Setting resources...
VGA: PCI: 00:18.0 (aka node 0) link 0 has VGA device
PCI: 00:18.0 1c0 <- [0x0000001000 - 0x0000003fff] io <node 0 link 0>
PCI: 00:18.0 1b8 <- [0x00e0000000 - 0x00efffffff] prefmem <node 0 link 0>
PCI: 00:18.0 1b0 <- [0x00f4000000 - 0x00f61fffff] mem <node 0 link 0>
PCI: 00:01.0 14 <- [0x00f6144000 - 0x00f6144fff] mem
PNP: 002e.1 60 <- [0x00000003f8 - 0x00000003ff] io
PNP: 002e.1 70 <- [0x0000000004 - 0x0000000004] irq
PNP: 002e.5 60 <- [0x0000000060 - 0x0000000060] io
PNP: 002e.5 62 <- [0x0000000064 - 0x0000000064] io
PNP: 002e.5 70 <- [0x0000000001 - 0x0000000001] irq
PNP: 002e.6 70 <- [0x000000000c - 0x000000000c] irq
PCI: 00:01.1 10 <- [0x0000002c00 - 0x0000002c3f] io
PCI: 00:01.1 20 <- [0x0000002c40 - 0x0000002c7f] io
PCI: 00:01.1 24 <- [0x0000002c80 - 0x0000002cbf] io
PCI: 00:01.1 60 <- [0x0000002000 - 0x00000020ff] io
PCI: 00:01.1 64 <- [0x0000002400 - 0x00000024ff] io
PCI: 00:01.1 68 <- [0x0000002800 - 0x00000028ff] io
PCI: 00:01.3 10 <- [0x00f6100000 - 0x00f613ffff] mem
PCI: 00:02.0 10 <- [0x00f6145000 - 0x00f6145fff] mem
PCI: 00:02.1 10 <- [0x00f614a000 - 0x00f614a0ff] mem
PCI: 00:04.0 20 <- [0x0000002cc0 - 0x0000002ccf] io
PCI: 00:05.0 10 <- [0x0000003000 - 0x0000003007] io
PCI: 00:05.0 14 <- [0x0000003070 - 0x0000003073] io
PCI: 00:05.0 18 <- [0x0000003010 - 0x0000003017] io
PCI: 00:05.0 1c <- [0x0000003080 - 0x0000003083] io
PCI: 00:05.0 20 <- [0x0000002cd0 - 0x0000002cdf] io
PCI: 00:05.0 24 <- [0x00f6146000 - 0x00f6146fff] mem
PCI: 00:05.1 10 <- [0x0000003020 - 0x0000003027] io
PCI: 00:05.1 14 <- [0x0000003090 - 0x0000003093] io
PCI: 00:05.1 18 <- [0x0000003030 - 0x0000003037] io
PCI: 00:05.1 1c <- [0x00000030a0 - 0x00000030a3] io
PCI: 00:05.1 20 <- [0x0000002ce0 - 0x0000002cef] io
PCI: 00:05.1 24 <- [0x00f6147000 - 0x00f6147fff] mem
PCI: 00:05.2 10 <- [0x0000003040 - 0x0000003047] io
PCI: 00:05.2 14 <- [0x00000030b0 - 0x00000030b3] io
PCI: 00:05.2 18 <- [0x0000003050 - 0x0000003057] io
PCI: 00:05.2 1c <- [0x00000030c0 - 0x00000030c3] io
PCI: 00:05.2 20 <- [0x0000002cf0 - 0x0000002cff] io
PCI: 00:05.2 24 <- [0x00f6148000 - 0x00f6148fff] mem
PCI: 00:06.1 10 <- [0x00f6140000 - 0x00f6143fff] mem
PCI: 00:08.0 10 <- [0x00f6149000 - 0x00f6149fff] mem
PCI: 00:08.0 14 <- [0x0000003060 - 0x0000003067] io
PCI: 00:08.0 18 <- [0x00f614b000 - 0x00f614b0ff] mem
PCI: 00:08.0 1c <- [0x00f614c000 - 0x00f614c00f] mem
PCI: 00:0a.0 1c <- [0x0000001000 - 0x0000001fff] bus 02 io
PCI: 00:0a.0 24 <- [0x00e0000000 - 0x00efffffff] bus 02 prefmem
PCI: 00:0a.0 20 <- [0x00f4000000 - 0x00f60fffff] bus 02 mem
PCI: 02:00.0 10 <- [0x00f4000000 - 0x00f4ffffff] mem
PCI: 02:00.0 14 <- [0x00e0000000 - 0x00efffffff] prefmem64
PCI: 02:00.0 1c <- [0x00f5000000 - 0x00f5ffffff] mem64
PCI: 02:00.0 24 <- [0x0000001000 - 0x000000107f] io
PCI: 02:00.0 30 <- [0x00f6000000 - 0x00f601ffff] romem
PCI: 00:18.3 94 <- [0x00f0000000 - 0x00f3ffffff] mem <gart>
Done setting resources.
Done allocating resources.
Enabling resources...
PCI: 00:18.0 cmd <- 140
PCI: 00:00.0 subsystem <- 1022/2b80
PCI: 00:00.0 cmd <- 146
PCI: 00:01.0 subsystem <- 1022/2b80
PCI: 00:01.0 cmd <- 14f
mcp55 lpc decode:PNP: 002e.1, base=0x000003f8, end=0x000003ff
mcp55 lpc decode:PNP: 002e.5, base=0x00000060, end=0x00000060
mcp55 lpc decode:PNP: 002e.5, base=0x00000064, end=0x00000064
PCI: 00:01.1 subsystem <- 1022/2b80
PCI: 00:01.1 cmd <- 141
PCI: 00:01.2 cmd <- 540
PCI: 00:01.3 cmd <- 142
PCI: 00:02.0 subsystem <- 1022/2b80
PCI: 00:02.0 cmd <- 142
PCI: 00:02.1 subsystem <- 1022/2b80
PCI: 00:02.1 cmd <- 142
PCI: 00:04.0 subsystem <- 1022/2b80
PCI: 00:04.0 cmd <- 141
PCI: 00:05.0 subsystem <- 1022/2b80
PCI: 00:05.0 cmd <- 143
PCI: 00:05.1 subsystem <- 1022/2b80
PCI: 00:05.1 cmd <- 143
PCI: 00:05.2 subsystem <- 1022/2b80
PCI: 00:05.2 cmd <- 143
PCI: 00:06.0 bridge ctrl <- 0a03
PCI: 00:06.0 cmd <- 144
PCI: 00:06.1 subsystem <- 1022/2b80
PCI: 00:06.1 cmd <- 142
PCI: 00:08.0 subsystem <- 1022/2b80
PCI: 00:08.0 cmd <- 143
PCI: 00:0a.0 bridge ctrl <- 000b
PCI: 00:0a.0 cmd <- 147
PCI: 02:00.0 cmd <- 143
PCI: 00:0b.0 bridge ctrl <- 0003
PCI: 00:0b.0 cmd <- 140
PCI: 00:0c.0 bridge ctrl <- 0003
PCI: 00:0c.0 cmd <- 140
PCI: 00:0d.0 bridge ctrl <- 0003
PCI: 00:0d.0 cmd <- 140
PCI: 00:0e.0 bridge ctrl <- 0003
PCI: 00:0e.0 cmd <- 140
PCI: 00:0f.0 bridge ctrl <- 0003
PCI: 00:0f.0 cmd <- 140
PCI: 00:18.1 subsystem <- 1022/2b80
PCI: 00:18.1 cmd <- 140
PCI: 00:18.2 subsystem <- 1022/2b80
PCI: 00:18.2 cmd <- 140
PCI: 00:18.3 cmd <- 140
done.
Initializing devices...
Root Device init
APIC_CLUSTER: 0 init
start_eip=0x00005000, offset=0x00110000, code_size=0x0000005b

Final              : tsc [0a]=000000011362fa07
Initializing CPU #0
CPU: vendor AMD device 40fb2
CPU: family 0f, model 4b, stepping 02
brandId=08cd
Enabling cache

Setting fixed MTRRs(0-88) type: UC
Setting fixed MTRRs(0-16) Type: WB, RdMEM, WrMEM
Setting fixed MTRRs(24-88) Type: WB, RdMEM, WrMEM
DONE fixed MTRRs
Setting variable MTRR 0, base:    0MB, range: 2048MB, type WB
DONE variable MTRRs
Clear out the extra MTRR's

MTRR check
Fixed MTRRs   : Enabled
Variable MTRRs: Enabled

CPU model Mobile AMD Sempron(tm) Processor 3700+
Setting up local apic... apic_id: 0x00 done.
ECC Disabled
CPU #0 Initialized
Initializing CPU #1
Waiting for 1 CPUS to stop
CPU: vendor AMD device 40fb2
CPU: family 0f, model 4b, stepping 02
brandId=08cd
Enabling cache

Setting fixed MTRRs(0-88) type: UC
Setting fixed MTRRs(0-16) Type: WB, RdMEM, WrMEM
Setting fixed MTRRs(24-88) Type: WB, RdMEM, WrMEM
DONE fixed MTRRs
Setting variable MTRR 0, base:    0MB, range: 2048MB, type WB
DONE variable MTRRs
Clear out the extra MTRR's

MTRR check
Fixed MTRRs   : Enabled
Variable MTRRs: Enabled

CPU model Mobile AMD Sempron(tm) Processor 3700+
Setting up local apic... apic_id: 0x01 done.
CPU #1 Initialized
All AP CPUs stopped

Final              : tsc [0b]=000000012498c6b6
PCI: 00:18.0 init
PCI: 00:01.0 init
set power on after power fail
RTC Init
Invalid CMOS LB checksum
PNP: 002e.1 init
PNP: 002e.5 init
PNP: 002e.6 init
PCI: 00:01.1 init
PCI: 00:02.1 init
PCI: 00:04.0 init
IDE0
PCI: 00:05.0 init
SATA S 	SATA P 
PCI: 00:05.1 init
SATA S 	SATA P 
PCI: 00:05.2 init
SATA S 	SATA P 
PCI: 00:06.0 init
dev_root mem base = 0x00e0000000
[0x50] <-- 0xe0000000
PCI: 00:06.1 init
base = f6140000
codec_mask = 01
codec viddid: 10ec0883
No verb!
PCI: 00:08.0 init
MCP55 MAC PHY ID 0x01410c00 PHY ADDR 1
PCI: 00:0a.0 init
PCI: 00:0b.0 init
PCI: 00:0c.0 init
PCI: 00:0d.0 init
PCI: 00:0e.0 init
PCI: 00:0f.0 init
PCI: 00:18.1 init
PCI: 00:18.2 init
PCI: 00:18.3 init
NB: Function 3 Misc Control.. done.
PCI: 00:01.2 init
PCI: 00:01.3 init
PCI: 02:00.0 init
rom address for PCI: 02:00.0 = f6000000
copying VGA ROM Image from 0xf6000000 to 0xc0000, 0xee00 bytes
entering emulator
halt_sys: file /home/ward/lb/LinuxBIOSv2/src/devices/emulator/x86emu/ops.c, line 4387
Devices initialized
Writing IRQ routing tables to 0xf0000...done.
Wrote the mp table end at: 00000020 - 00000274
Adjust low_table_end from 0x00000500 to 0x00001000 
Adjust rom_table_end from 0x000f0400 to 0x00100000 
Wrote linuxbios table at: 00000500 - 00000db0  checksum 95ff

Welcome to elfboot, the open sourced starter.
January 2002, Eric Biederman.
Version 1.3

rom_stream: 0xfffc0000 - 0xfffdefff
Found ELF candidate at offset 0
New segment addr 0x100000 size 0x407c0 offset 0xc0 filesize 0x16808
(cleaned up) New segment addr 0x100000 size 0x407c0 offset 0xc0 filesize 0x16808
New segment addr 0x1407c0 size 0x48 offset 0x168e0 filesize 0x48
(cleaned up) New segment addr 0x1407c0 size 0x48 offset 0x168e0 filesize 0x48
Dropping non PT_LOAD segment
Dropping non PT_LOAD segment
Loading Segment: addr: 0x000000007ff84000 memsz: 0x000000000003e000 filesz: 0x0000000000016808
Clearing Segment: addr: 0x000000007ff9a808 memsz: 0x00000000000277f8
Loading Segment: addr: 0x00000000001407c0 memsz: 0x0000000000000048 filesz: 0x0000000000000048
Loading Segment: addr: 0x000000000013e000 memsz: 0x00000000000027c0 filesz: 0x0000000000000000
Clearing Segment: addr: 0x000000000013e000 memsz: 0x00000000000027c0
Jumping to boot code at 0x10fc84
FILO version 0.5 (root at countzero) Tue Apr  3 17:31:54 EDT 2007
collect_sys_info: boot eax = 0xe1fb007
collect_sys_info: boot ebx = 0x7ffe2700
collect_sys_info: boot arg = 0x7ffe2700
malloc_diag: alloc: 0 bytes (0 blocks), free: 16376 bytes (1 blocks)
malloc_diag: alloc: 24 bytes (1 blocks), free: 16352 bytes (1 blocks)
collect_elfboot_info: Bootloader: elfboot
collect_elfboot_info: Version: 1.3
malloc_diag: alloc: 40 bytes (2 blocks), free: 16336 bytes (1 blocks)
collect_linuxbios_info: Searching for LinuxBIOS tables...
find_lb_table: Found canidate at: 00000500
find_lb_table: header checksum o.k.
find_lb_table: table checksum o.k.
find_lb_table: record count o.k.
collect_linuxbios_info: Found LinuxBIOS table at: 00000500
convert_memmap: 0x00000000000000 0x00000000001000 16
convert_memmap: 0x00000000001000 0x0000000009f000 1
convert_memmap: 0x000000000c0000 0x00000000030000 1
convert_memmap: 0x000000000f0000 0x00000000010000 16
convert_memmap: 0x00000000100000 0x0000007ff00000 1
collect_sys_info: 0000000000001000-00000000000a0000
collect_sys_info: 00000000000c0000-00000000000f0000
collect_sys_info: 0000000000100000-0000000080000000
collect_sys_info: RAM 2048 MB
relocate: Current location: 0x100000-0x140807
relocate: Relocating to 0x7ffbf7f0-0x7ffffff7... ok
setup_timers: CPU 2000 MHz
pci_init: Scanning PCI: found 25 devices
malloc_diag: alloc: 352 bytes (3 blocks), free: 16024 bytes (1 blocks)
pci_init: 00:00.0 10de:0369 0500 00
pci_init: 00:01.0 10de:0360 0601 00
pci_init: 00:01.1 10de:0368 0c05 00
pci_init: 00:01.2 10de:036a 0500 00
pci_init: 00:01.3 10de:036b 0b40 00
pci_init: 00:02.0 10de:036c 0c03 10
pci_init: 00:02.1 10de:036d 0c03 20
pci_init: 00:04.0 10de:036e 0101 8a
pci_init: 00:05.0 10de:037f 0101 85
pci_init: 00:05.1 10de:037f 0101 85
pci_init: 00:05.2 10de:037f 0101 85
pci_init: 00:06.0 10de:0370 0604 00
pci_init: 00:06.1 10de:0371 0403 00
pci_init: 00:08.0 10de:0373 0680 00
pci_init: 00:0a.0 10de:0376 0604 00
pci_init: 00:0b.0 10de:0374 0604 00
pci_init: 00:0c.0 10de:0374 0604 00
pci_init: 00:0d.0 10de:0378 0604 00
pci_init: 00:0e.0 10de:0375 0604 00
pci_init: 00:0f.0 10de:0377 0604 00
pci_init: 00:18.0 1022:1100 0600 00
pci_init: 00:18.1 1022:1101 0600 00
pci_init: 00:18.2 1022:1102 0600 00
pci_init: 00:18.3 1022:1103 0600 00
pci_init: 02:00.0 10de:0392 0300 00
menu: hde1:/boot/grub/menu.lst
malloc_diag: alloc: 368 bytes (4 blocks), free: 16008 bytes (1 blocks)
file_open: dev=hde1, path=/boot/grub/menu.lst
find_ide_controller: found PCI IDE controller 10de:037f prog_if=0x85
find_ide_controller: primary channel: native PCI mode
find_ide_controller: cmd_base=0x3000 ctrl_base=0x3070
ide_software_reset: Waiting for ide2 to become ready for reset... ok
init_drive: Testing for hde
init_drive: Probing for hde
init_drive: LBA mode, sectors=268435455
init_drive: LBA48 mode, sectors=488397168
init_drive: Init device params... ok
hde: LBA48 250GB: WDC WD2500JS-60NCB1                     
init_drive: Testing for hdf
init_drive: Probing for hdf
print_status: IDE: status=0x0, err=0x0
init_drive: Testing for hdf
init_drive: Probing for hdf
print_status: IDE: status=0x0, err=0x0
devopen: Partition 1 start 63 length 476327187
Mounted ext2fs
malloc_diag: alloc: 352 bytes (3 blocks), free: 16024 bytes (1 blocks)
Press any key to continue.
Press any key to continue.
Press any key to continue.
Press any key to continue.
Press any key to continue.
Press `ESC' to enter the menu... 2   Press `ESC' to enter the menu... 1   Press `ESC' to enter the menu... 0     Booting 'Ubuntu LB, kernel 2.6.21-rc3'

root  (hd4,0)
kernel  /boot/vmlinuz-2.6.21-rc3 root=/dev/sda1 ro apic=debug acpi_dbg_level=0x
ffffffff pci=noacpi,routeirq snd-hda-intel.enable_msi=1 console=tty0 console=tt
yS0,115200
boot

Booting 'hde1:/boot/vmlinuz-2.6.21-rc3 root=/dev/sda1 ro apic=debug acpi_dbg_le
vel=0xffffffff pci=noacpi,routeirq snd-hda-intel.enable_msi=1 console=tty0 cons
ole=ttyS0,115200'
malloc_diag: alloc: 528 bytes (4 blocks), free: 15848 bytes (1 blocks)
malloc_diag: alloc: 544 bytes (5 blocks), free: 15832 bytes (1 blocks)
file_open: dev=hde1, path=/boot/vmlinuz-2.6.21-rc3
devopen: already open
malloc_diag: alloc: 528 bytes (4 blocks), free: 15848 bytes (1 blocks)
elf_load: Not a bootable ELF image
malloc_diag: alloc: 544 bytes (5 blocks), free: 15832 bytes (1 blocks)
file_open: dev=hde1, path=/boot/vmlinuz-2.6.21-rc3
devopen: already open
malloc_diag: alloc: 528 bytes (4 blocks), free: 15848 bytes (1 blocks)
Found Linux version 2.6.21-rc3 (root at neuromancer) #1 SMP PREEMPT Mon Mar 12 15:10:47 EDT 2007 (protocol 0x204) (loadflags 0x1) bzImage.
init_linux_params: Setting up paramters at 0x90000
set_memory_size: 0000000000001000 - 00000000000a0000
set_memory_size: 00000000000c0000 - 00000000000f0000
set_memory_size: 0000000000100000 - 0000000080000000
set_memory_size: ramtop=0x80000000
set_memory_size: ext_mem_k=64512, alt_mem_k=2096128
parse_command_line: original command line: "root=/dev/sda1 ro apic=debug acpi_dbg_level=0xffffffff pci=noacpi,routeirq snd-hda-intel.enable_msi=1 console=tty0 console=ttyS0,115200"
parse_command_line: kernel command line at 0x91000
parse_command_line: kernel command line (135 bytes): "root=/dev/sda1 ro apic=debug acpi_dbg_level=0xffffffff pci=noacpi,routeirq snd-hda-intel.enable_msi=1 console=tty0 console=ttyS0,115200"
load_linux_kernel: offset=0x1e00 addr=0x100000 size=0x1d1473
Loading kernel...  10 consecutive blocks  43910301 - 43910310  len=1905267 ret=512
Can't read kernel
malloc_diag: alloc: 352 bytes (3 blocks), free: 16024 bytes (1 blocks)


Booting 'hde1:/boot/vmlinuz-2.6.21-rc3 root=/dev/sda1 ro apic=debug acpi_dbg_le
vel=0xffffffff pci=noacpi,routeirq snd-hda-intel.enable_msi=1 console=tty0 cons
ole=ttyS0,115200'
malloc_diag: alloc: 528 bytes (4 blocks), free: 15848 bytes (1 blocks)
malloc_diag: alloc: 544 bytes (5 blocks), free: 15832 bytes (1 blocks)
file_open: dev=hde1, path=/boot/vmlinuz-2.6.21-rc3
devopen: already open
malloc_diag: alloc: 528 bytes (4 blocks), free: 15848 bytes (1 blocks)
elf_load: Not a bootable ELF image
malloc_diag: alloc: 544 bytes (5 blocks), free: 15832 bytes (1 blocks)
file_open: dev=hde1, path=/boot/vmlinuz-2.6.21-rc3
devopen: already open
malloc_diag: alloc: 528 bytes (4 blocks), free: 15848 bytes (1 blocks)
Found Linux version 2.6.21-rc3 (root at neuromancer) #1 SMP PREEMPT Mon Mar 12 15:10:47 EDT 2007 (protocol 0x204) (loadflags 0x1) bzImage.
init_linux_params: Setting up paramters at 0x90000
set_memory_size: 0000000000001000 - 00000000000a0000
set_memory_size: 00000000000c0000 - 00000000000f0000
set_memory_size: 0000000000100000 - 0000000080000000
set_memory_size: ramtop=0x80000000
set_memory_size: ext_mem_k=64512, alt_mem_k=2096128
parse_command_line: original command line: "root=/dev/sda1 ro apic=debug acpi_dbg_level=0xffffffff pci=noacpi,routeirq snd-hda-intel.enable_msi=1 console=tty0 console=ttyS0,115200"
parse_command_line: kernel command line at 0x91000
parse_command_line: kernel command line (135 bytes): "root=/dev/sda1 ro apic=debug acpi_dbg_level=0xffffffff pci=noacpi,routeirq snd-hda-intel.enable_msi=1 console=tty0 console=ttyS0,115200"
load_linux_kernel: offset=0x1e00 addr=0x100000 size=0x1d1473
Loading kernel...  10 consecutive blocks  43910301 - 43910310  len=1905267 ret=512
Can't read kernel
malloc_diag: alloc: 352 bytes (3 blocks), free: 16024 bytes (1 blocks)
root  (hd4,0)
kernel  /boot/vmlinuz-2.6.20.1 root=/dev/sda1 ro apic=debug acpi_dbg_level=0xff
ffffff pci=noacpi,routeirq snd-hda-intel.enable_msi=1 console=tty0 console=ttyS
0,115200
boot

Booting 'hde1:/boot/vmlinuz-2.6.20.1 root=/dev/sda1 ro apic=debug acpi_dbg_leve
l=0xffffffff pci=noacpi,routeirq snd-hda-intel.enable_msi=1 console=tty0 consol
e=ttyS0,115200'
malloc_diag: alloc: 528 bytes (4 blocks), free: 15848 bytes (1 blocks)
malloc_diag: alloc: 544 bytes (5 blocks), free: 15832 bytes (1 blocks)
file_open: dev=hde1, path=/boot/vmlinuz-2.6.20.1
devopen: already open
malloc_diag: alloc: 528 bytes (4 blocks), free: 15848 bytes (1 blocks)
elf_load: Not a bootable ELF image
malloc_diag: alloc: 544 bytes (5 blocks), free: 15832 bytes (1 blocks)
file_open: dev=hde1, path=/boot/vmlinuz-2.6.20.1
devopen: already open
malloc_diag: alloc: 528 bytes (4 blocks), free: 15848 bytes (1 blocks)
Found Linux version 2.6.20.1 (root at neuromancer) #1 SMP PREEMPT Thu Mar 8 12:14:22 EST 2007 (protocol 0x204) (loadflags 0x1) bzImage.
init_linux_params: Setting up paramters at 0x90000
set_memory_size: 0000000000001000 - 00000000000a0000
set_memory_size: 00000000000c0000 - 00000000000f0000
set_memory_size: 0000000000100000 - 0000000080000000
set_memory_size: ramtop=0x80000000
set_memory_size: ext_mem_k=64512, alt_mem_k=2096128
parse_command_line: original command line: "root=/dev/sda1 ro apic=debug acpi_dbg_level=0xffffffff pci=noacpi,routeirq snd-hda-intel.enable_msi=1 console=tty0 console=ttyS0,115200"
parse_command_line: kernel command line at 0x91000
parse_command_line: kernel command line (135 bytes): "root=/dev/sda1 ro apic=debug acpi_dbg_level=0xffffffff pci=noacpi,routeirq snd-hda-intel.enable_msi=1 console=tty0 console=ttyS0,115200"
load_linux_kernel: offset=0x1e00 addr=0x100000 size=0x1cd437
Loading kernel...  10 consecutive blocks  43933698 - 43933707  len=1888823 ret=512
Can't read kernel
malloc_diag: alloc: 352 bytes (3 blocks), free: 16024 bytes (1 blocks)


Booting 'hde1:/boot/vmlinuz-2.6.20.1 root=/dev/sda1 ro apic=debug acpi_dbg_leve
l=0xffffffff pci=noacpi,routeirq snd-hda-intel.enable_msi=1 console=tty0 consol
e=ttyS0,115200'
malloc_diag: alloc: 528 bytes (4 blocks), free: 15848 bytes (1 blocks)
malloc_diag: alloc: 544 bytes (5 blocks), free: 15832 bytes (1 blocks)
file_open: dev=hde1, path=/boot/vmlinuz-2.6.20.1
devopen: already open
malloc_diag: alloc: 528 bytes (4 blocks), free: 15848 bytes (1 blocks)
elf_load: Not a bootable ELF image
malloc_diag: alloc: 544 bytes (5 blocks), free: 15832 bytes (1 blocks)
file_open: dev=hde1, path=/boot/vmlinuz-2.6.20.1
devopen: already open
malloc_diag: alloc: 528 bytes (4 blocks), free: 15848 bytes (1 blocks)
Found Linux version 2.6.20.1 (root at neuromancer) #1 SMP PREEMPT Thu Mar 8 12:14:22 EST 2007 (protocol 0x204) (loadflags 0x1) bzImage.
init_linux_params: Setting up paramters at 0x90000
set_memory_size: 0000000000001000 - 00000000000a0000
set_memory_size: 00000000000c0000 - 00000000000f0000
set_memory_size: 0000000000100000 - 0000000080000000
set_memory_size: ramtop=0x80000000
set_memory_size: ext_mem_k=64512, alt_mem_k=2096128
parse_command_line: original command line: "root=/dev/sda1 ro apic=debug acpi_dbg_level=0xffffffff pci=noacpi,routeirq snd-hda-intel.enable_msi=1 console=tty0 console=ttyS0,115200"
parse_command_line: kernel command line at 0x91000
parse_command_line: kernel command line (135 bytes): "root=/dev/sda1 ro apic=debug acpi_dbg_level=0xffffffff pci=noacpi,routeirq snd-hda-intel.enable_msi=1 console=tty0 console=ttyS0,115200"
load_linux_kernel: offset=0x1e00 addr=0x100000 size=0x1cd437
Loading kernel...  10 consecutive blocks  43933698 - 43933707  len=1888823 ret=512
Can't read kernel
malloc_diag: alloc: 352 bytes (3 blocks), free: 16024 bytes (1 blocks)
root  (hd4,0)
kernel  /boot/vmlinuz-2.6.15-23-amd64-generic root=/dev/hde1 ro noapic console=
tty0 console=ttyS0,115200
initrd  /boot/initrd.img-2.6.15-23-amd64-generic
boot

Booting 'hde1:/boot/vmlinuz-2.6.15-23-amd64-generic root=/dev/hde1 ro noapic co
nsole=tty0 console=ttyS0,115200 initrd=/boot/initrd.img-2.6.15-23-amd64-generic
'
malloc_diag: alloc: 512 bytes (4 blocks), free: 15864 bytes (1 blocks)
malloc_diag: alloc: 528 bytes (5 blocks), free: 15848 bytes (1 blocks)
file_open: dev=hde1, path=/boot/vmlinuz-2.6.15-23-amd64-generic
devopen: already open
malloc_diag: alloc: 512 bytes (4 blocks), free: 15864 bytes (1 blocks)
elf_load: Not a bootable ELF image
malloc_diag: alloc: 528 bytes (5 blocks), free: 15848 bytes (1 blocks)
file_open: dev=hde1, path=/boot/vmlinuz-2.6.15-23-amd64-generic
devopen: already open
malloc_diag: alloc: 512 bytes (4 blocks), free: 15864 bytes (1 blocks)
Found Linux version 2.6.15-23-amd64-generic (buildd at yellow) #1 SMP PREEMPT Tue May 23 13:45:47 UTC 2006 (protocol 0x204) (loadflags 0x1) bzImage.
init_linux_params: Setting up paramters at 0x90000
set_memory_size: 0000000000001000 - 00000000000a0000
set_memory_size: 00000000000c0000 - 00000000000f0000
set_memory_size: 0000000000100000 - 0000000080000000
set_memory_size: ramtop=0x80000000
set_memory_size: ext_mem_k=64512, alt_mem_k=2096128
parse_command_line: original command line: "root=/dev/hde1 ro noapic console=tty0 console=ttyS0,115200 initrd=/boot/initrd.img-2.6.15-23-amd64-generic"
parse_command_line: kernel command line at 0x91000
malloc_diag: alloc: 568 bytes (5 blocks), free: 15808 bytes (1 blocks)
parse_command_line: initrd=/boot/initrd.img-2.6.15-23-amd64-generic
parse_command_line: kernel command line (58 bytes): "root=/dev/hde1 ro noapic console=tty0 console=ttyS0,115200"
load_linux_kernel: offset=0x1e00 addr=0x100000 size=0x1689b7
Loading kernel...  10 consecutive blocks  43909653 - 43909662  len=1476535 ret=512
Can't read kernel
malloc_diag: alloc: 512 bytes (4 blocks), free: 15864 bytes (1 blocks)
malloc_diag: alloc: 352 bytes (3 blocks), free: 16024 bytes (1 blocks)


Booting 'hde1:/boot/vmlinuz-2.6.15-23-amd64-generic root=/dev/hde1 ro noapic co
nsole=tty0 console=ttyS0,115200 initrd=/boot/initrd.img-2.6.15-23-amd64-generic
'
malloc_diag: alloc: 512 bytes (4 blocks), free: 15864 bytes (1 blocks)
malloc_diag: alloc: 528 bytes (5 blocks), free: 15848 bytes (1 blocks)
file_open: dev=hde1, path=/boot/vmlinuz-2.6.15-23-amd64-generic
devopen: already open
malloc_diag: alloc: 512 bytes (4 blocks), free: 15864 bytes (1 blocks)
elf_load: Not a bootable ELF image
malloc_diag: alloc: 528 bytes (5 blocks), free: 15848 bytes (1 blocks)
file_open: dev=hde1, path=/boot/vmlinuz-2.6.15-23-amd64-generic
devopen: already open
malloc_diag: alloc: 512 bytes (4 blocks), free: 15864 bytes (1 blocks)
Found Linux version 2.6.15-23-amd64-generic (buildd at yellow) #1 SMP PREEMPT Tue May 23 13:45:47 UTC 2006 (protocol 0x204) (loadflags 0x1) bzImage.
init_linux_params: Setting up paramters at 0x90000
set_memory_size: 0000000000001000 - 00000000000a0000
set_memory_size: 00000000000c0000 - 00000000000f0000
set_memory_size: 0000000000100000 - 0000000080000000
set_memory_size: ramtop=0x80000000
set_memory_size: ext_mem_k=64512, alt_mem_k=2096128
parse_command_line: original command line: "root=/dev/hde1 ro noapic console=tty0 console=ttyS0,115200 initrd=/boot/initrd.img-2.6.15-23-amd64-generic"
parse_command_line: kernel command line at 0x91000
malloc_diag: alloc: 568 bytes (5 blocks), free: 15808 bytes (1 blocks)
parse_command_line: initrd=/boot/initrd.img-2.6.15-23-amd64-generic
parse_command_line: kernel command line (58 bytes): "root=/dev/hde1 ro noapic console=tty0 console=ttyS0,115200"
load_linux_kernel: offset=0x1e00 addr=0x100000 size=0x1689b7
Loading kernel...  10 consecutive blocks  43909653 - 43909662  len=1476535 ret=512
Can't read kernel
malloc_diag: alloc: 512 bytes (4 blocks), free: 15864 bytes (1 blocks)
malloc_diag: alloc: 352 bytes (3 blocks), free: 16024 bytes (1 blocks)
root  (hd0,0)
kernel  /boot/vmlinuz-2.6.21-rc3 root=/dev/sda1 ro console=tty0 console=ttyS0,1
15200 noapic
boot

Booting 'hda1:/boot/vmlinuz-2.6.21-rc3 root=/dev/sda1 ro console=tty0 console=t
tyS0,115200 noapic'
malloc_diag: alloc: 456 bytes (4 blocks), free: 15920 bytes (1 blocks)
malloc_diag: alloc: 472 bytes (5 blocks), free: 15904 bytes (1 blocks)
file_open: dev=hda1, path=/boot/vmlinuz-2.6.21-rc3
find_ide_controller: found PCI IDE controller 10de:036e prog_if=0x8a
find_ide_controller: primary channel: compatibility mode
find_ide_controller: cmd_base=0x1f0 ctrl_base=0x3f4
ide_software_reset: Waiting for ide0 to become ready for reset... ok
init_drive: Testing for hda
init_drive: Probing for hda
print_status: IDE: status=0x51, err=0x4
init_drive: Testing for hda
init_drive: Probing for hda
hda: ATAPI: PIONEER DVD-RW  DVR-111D                
pio_packet: no drq after sending packet
print_status: IDE: status=0x51, err=0x60
atapi_request_sense: 70 00 06 00 00 00 00 0e 00 00 00 00 29 00 00 00 00 00 
pio_packet: no drq after sending packet
print_status: IDE: status=0x51, err=0x20
atapi_request_sense: 70 00 02 00 00 00 00 0e 00 00 00 00 3a 00 00 00 00 00 
atapi_detect_medium: Device reports MEDIUM NOT PRESENT
Media detection failed
devopen: failed to open ide
malloc_diag: alloc: 456 bytes (4 blocks), free: 15920 bytes (1 blocks)
malloc_diag: alloc: 352 bytes (3 blocks), free: 16024 bytes (1 blocks)


Booting 'hda1:/boot/vmlinuz-2.6.21-rc3 root=/dev/sda1 ro console=tty0 console=t
tyS0,115200 noapic'
malloc_diag: alloc: 456 bytes (4 blocks), free: 15920 bytes (1 blocks)
malloc_diag: alloc: 472 bytes (5 blocks), free: 15904 bytes (1 blocks)
file_open: dev=hda1, path=/boot/vmlinuz-2.6.21-rc3
pio_packet: no drq after sending packet
print_status: IDE: status=0x51, err=0x20
atapi_request_sense: 70 00 02 00 00 00 00 0e 00 00 00 00 3a 00 00 00 00 00 
atapi_detect_medium: Device reports MEDIUM NOT PRESENT
Media detection failed
devopen: failed to open ide
malloc_diag: alloc: 456 bytes (4 blocks), free: 15920 bytes (1 blocks)
malloc_diag: alloc: 352 bytes (3 blocks), free: 16024 bytes (1 blocks)
root  (hd0,0)
kernel  /boot/vmlinuz-2.6.21-rc3 root=/dev/sda1 ro console=tty0 console=ttyS0,1
15200 single noapic
boot

Booting 'hda1:/boot/vmlinuz-2.6.21-rc3 root=/dev/sda1 ro console=tty0 console=t
tyS0,115200 single noapic'
malloc_diag: alloc: 456 bytes (4 blocks), free: 15920 bytes (1 blocks)
malloc_diag: alloc: 472 bytes (5 blocks), free: 15904 bytes (1 blocks)
file_open: dev=hda1, path=/boot/vmlinuz-2.6.21-rc3
pio_packet: no drq after sending packet
print_status: IDE: status=0x51, err=0x20
atapi_request_sense: 70 00 02 00 00 00 00 0e 00 00 00 00 3a 00 00 00 00 00 
atapi_detect_medium: Device reports MEDIUM NOT PRESENT
Media detection failed
devopen: failed to open ide
malloc_diag: alloc: 456 bytes (4 blocks), free: 15920 bytes (1 blocks)
malloc_diag: alloc: 352 bytes (3 blocks), free: 16024 bytes (1 blocks)


Booting 'hda1:/boot/vmlinuz-2.6.21-rc3 root=/dev/sda1 ro console=tty0 console=t
tyS0,115200 single noapic'
malloc_diag: alloc: 456 bytes (4 blocks), free: 15920 bytes (1 blocks)
malloc_diag: alloc: 472 bytes (5 blocks), free: 15904 bytes (1 blocks)
file_open: dev=hda1, path=/boot/vmlinuz-2.6.21-rc3
pio_packet: no drq after sending packet
print_status: IDE: status=0x51, err=0x20
atapi_request_sense: 70 00 02 00 00 00 00 0e 00 00 00 00 3a 00 00 00 00 00 
atapi_detect_medium: Device reports MEDIUM NOT PRESENT
Media detection failed
devopen: failed to open ide
malloc_diag: alloc: 456 bytes (4 blocks), free: 15920 bytes (1 blocks)
malloc_diag: alloc: 352 bytes (3 blocks), free: 16024 bytes (1 blocks)
root  (hd0,0)
kernel  /boot/vmlinuz-2.6.20.1 root=/dev/sda1 ro console=tty0 console=ttyS0,115
200 noapic
boot

Booting 'hda1:/boot/vmlinuz-2.6.20.1 root=/dev/sda1 ro console=tty0 console=tty
S0,115200 noapic'
malloc_diag: alloc: 448 bytes (4 blocks), free: 15928 bytes (1 blocks)
malloc_diag: alloc: 464 bytes (5 blocks), free: 15912 bytes (1 blocks)
file_open: dev=hda1, path=/boot/vmlinuz-2.6.20.1
pio_packet: no drq after sending packet
print_status: IDE: status=0x51, err=0x20
atapi_request_sense: 70 00 02 00 00 00 00 0e 00 00 00 00 3a 00 00 00 00 00 
atapi_detect_medium: Device reports MEDIUM NOT PRESENT
Media detection failed
devopen: failed to open ide
malloc_diag: alloc: 448 bytes (4 blocks), free: 15928 bytes (1 blocks)
malloc_diag: alloc: 352 bytes (3 blocks), free: 16024 bytes (1 blocks)


Booting 'hda1:/boot/vmlinuz-2.6.20.1 root=/dev/sda1 ro console=tty0 console=tty
S0,115200 noapic'
malloc_diag: alloc: 448 bytes (4 blocks), free: 15928 bytes (1 blocks)
malloc_diag: alloc: 464 bytes (5 blocks), free: 15912 bytes (1 blocks)
file_open: dev=hda1, path=/boot/vmlinuz-2.6.20.1
pio_packet: no drq after sending packet
print_status: IDE: status=0x51, err=0x20
atapi_request_sense: 70 00 02 00 00 00 00 0e 00 00 00 00 3a 00 00 00 00 00 
atapi_detect_medium: Device reports MEDIUM NOT PRESENT
Media detection failed
devopen: failed to open ide
malloc_diag: alloc: 448 bytes (4 blocks), free: 15928 bytes (1 blocks)
malloc_diag: alloc: 352 bytes (3 blocks), free: 16024 bytes (1 blocks)
root  (hd0,0)
kernel  /boot/vmlinuz-2.6.20.1 root=/dev/sda1 ro console=tty0 console=ttyS0,115
200 single noapic
boot

Booting 'hda1:/boot/vmlinuz-2.6.20.1 root=/dev/sda1 ro console=tty0 console=tty
S0,115200 single noapic'
malloc_diag: alloc: 456 bytes (4 blocks), free: 15920 bytes (1 blocks)
malloc_diag: alloc: 472 bytes (5 blocks), free: 15904 bytes (1 blocks)
file_open: dev=hda1, path=/boot/vmlinuz-2.6.20.1
pio_packet: no drq after sending packet
print_status: IDE: status=0x51, err=0x20
atapi_request_sense: 70 00 02 00 00 00 00 0e 00 00 00 00 3a 00 00 00 00 00 
atapi_detect_medium: Device reports MEDIUM NOT PRESENT
Media detection failed
devopen: failed to open ide
malloc_diag: alloc: 456 bytes (4 blocks), free: 15920 bytes (1 blocks)
malloc_diag: alloc: 352 bytes (3 blocks), free: 16024 bytes (1 blocks)


Booting 'hda1:/boot/vmlinuz-2.6.20.1 root=/dev/sda1 ro console=tty0 console=tty
S0,115200 single noapic'
malloc_diag: alloc: 456 bytes (4 blocks), free: 15920 bytes (1 blocks)
malloc_diag: alloc: 472 bytes (5 blocks), free: 15904 bytes (1 blocks)
file_open: dev=hda1, path=/boot/vmlinuz-2.6.20.1
pio_packet: no drq after sending packet
print_status: IDE: status=0x51, err=0x20
atapi_request_sense: 70 00 02 00 00 00 00 0e 00 00 00 00 3a 00 00 00 00 00 
atapi_detect_medium: Device reports MEDIUM NOT PRESENT
Media detection failed
devopen: failed to open ide
malloc_diag: alloc: 456 bytes (4 blocks), free: 15920 bytes (1 blocks)
malloc_diag: alloc: 352 bytes (3 blocks), free: 16024 bytes (1 blocks)
root  (hd0,0)
kernel  /boot/vmlinuz-2.6.15-23-amd64-generic root=/dev/sda1 ro console=tty0 co
nsole=ttyS0,115200 noapic
initrd  /boot/initrd.img-2.6.15-23-amd64-generic
boot

Booting 'hda1:/boot/vmlinuz-2.6.15-23-amd64-generic root=/dev/sda1 ro console=t
ty0 console=ttyS0,115200 noapic initrd=/boot/initrd.img-2.6.15-23-amd64-generic
'
malloc_diag: alloc: 512 bytes (4 blocks), free: 15864 bytes (1 blocks)
malloc_diag: alloc: 528 bytes (5 blocks), free: 15848 bytes (1 blocks)
file_open: dev=hda1, path=/boot/vmlinuz-2.6.15-23-amd64-generic
pio_packet: no drq after sending packet
print_status: IDE: status=0x51, err=0x20
atapi_request_sense: 70 00 02 00 00 00 00 0e 00 00 00 00 3a 00 00 00 00 00 
atapi_detect_medium: Device reports MEDIUM NOT PRESENT
Media detection failed
devopen: failed to open ide
malloc_diag: alloc: 512 bytes (4 blocks), free: 15864 bytes (1 blocks)
malloc_diag: alloc: 352 bytes (3 blocks), free: 16024 bytes (1 blocks)


Booting 'hda1:/boot/vmlinuz-2.6.15-23-amd64-generic root=/dev/sda1 ro console=t
ty0 console=ttyS0,115200 noapic initrd=/boot/initrd.img-2.6.15-23-amd64-generic
'
malloc_diag: alloc: 512 bytes (4 blocks), free: 15864 bytes (1 blocks)
malloc_diag: alloc: 528 bytes (5 blocks), free: 15848 bytes (1 blocks)
file_open: dev=hda1, path=/boot/vmlinuz-2.6.15-23-amd64-generic
pio_packet: no drq after sending packet
print_status: IDE: status=0x51, err=0x20
atapi_request_sense: 70 00 02 00 00 00 00 0e 00 00 00 00 3a 00 00 00 00 00 
atapi_detect_medium: Device reports MEDIUM NOT PRESENT
Media detection failed
devopen: failed to open ide
malloc_diag: alloc: 512 bytes (4 blocks), free: 15864 bytes (1 blocks)
malloc_diag: alloc: 352 bytes (3 blocks), free: 16024 bytes (1 blocks)
root  (hd0,0)
kernel  /boot/vmlinuz-2.6.15-23-amd64-generic root=/dev/sda1 ro console=tty0 co
nsole=ttyS0,115200 single noapic
initrd  /boot/initrd.img-2.6.15-23-amd64-generic
boot

Booting 'hda1:/boot/vmlinuz-2.6.15-23-amd64-generic root=/dev/sda1 ro console=t
ty0 console=ttyS0,115200 single noapic initrd=/boot/initrd.img-2.6.15-23-amd64-
generic'
malloc_diag: alloc: 520 bytes (4 blocks), free: 15856 bytes (1 blocks)
malloc_diag: alloc: 536 bytes (5 blocks), free: 15840 bytes (1 blocks)
file_open: dev=hda1, path=/boot/vmlinuz-2.6.15-23-amd64-generic
pio_packet: no drq after sending packet
print_status: IDE: status=0x51, err=0x20
atapi_request_sense: 70 00 02 00 00 00 00 0e 00 00 00 00 3a 00 00 00 00 00 
atapi_detect_medium: Device reports MEDIUM NOT PRESENT
Media detection failed
devopen: failed to open ide
malloc_diag: alloc: 520 bytes (4 blocks), free: 15856 bytes (1 blocks)
malloc_diag: alloc: 352 bytes (3 blocks), free: 16024 bytes (1 blocks)


Booting 'hda1:/boot/vmlinuz-2.6.15-23-amd64-generic root=/dev/sda1 ro console=t
ty0 console=ttyS0,115200 single noapic initrd=/boot/initrd.img-2.6.15-23-amd64-
generic'
malloc_diag: alloc: 520 bytes (4 blocks), free: 15856 bytes (1 blocks)
malloc_diag: alloc: 536 bytes (5 blocks), free: 15840 bytes (1 blocks)
file_open: dev=hda1, path=/boot/vmlinuz-2.6.15-23-amd64-generic
pio_packet: no drq after sending packet
print_status: IDE: status=0x51, err=0x20
atapi_request_sense: 70 00 02 00 00 00 00 0e 00 00 00 00 3a 00 00 00 00 00 
atapi_detect_medium: Device reports MEDIUM NOT PRESENT
Media detection failed
devopen: failed to open ide
malloc_diag: alloc: 520 bytes (4 blocks), free: 15856 bytes (1 blocks)
malloc_diag: alloc: 352 bytes (3 blocks), free: 16024 bytes (1 blocks)
root  (hd0,0)
kernel  /boot/memtest86+.bin 
boot

Booting 'hda1:/boot/memtest86+.bin '
malloc_diag: alloc: 392 bytes (4 blocks), free: 15984 bytes (1 blocks)
malloc_diag: alloc: 408 bytes (5 blocks), free: 15968 bytes (1 blocks)
file_open: dev=hda1, path=/boot/memtest86+.bin
pio_packet: no drq after sending packet
print_status: IDE: status=0x51, err=0x20
atapi_request_sense: 70 00 02 00 00 00 00 0e 00 00 00 00 3a 00 00 00 00 00 
atapi_detect_medium: Device reports MEDIUM NOT PRESENT
Media detection failed
devopen: failed to open ide
malloc_diag: alloc: 392 bytes (4 blocks), free: 15984 bytes (1 blocks)
malloc_diag: alloc: 352 bytes (3 blocks), free: 16024 bytes (1 blocks)


Booting 'hda1:/boot/memtest86+.bin '
malloc_diag: alloc: 392 bytes (4 blocks), free: 15984 bytes (1 blocks)
malloc_diag: alloc: 408 bytes (5 blocks), free: 15968 bytes (1 blocks)
file_open: dev=hda1, path=/boot/memtest86+.bin
pio_packet: no drq after sending packet
print_status: IDE: status=0x51, err=0x20
atapi_request_sense: 70 00 02 00 00 00 00 0e 00 00 00 00 3a 00 00 00 00 00 
atapi_detect_medium: Device reports MEDIUM NOT PRESENT
Media detection failed
devopen: failed to open ide
malloc_diag: alloc: 392 bytes (4 blocks), free: 15984 bytes (1 blocks)
malloc_diag: alloc: 352 bytes (3 blocks), free: 16024 bytes (1 blocks)


Booting 'hda1:/boot/memtest86+.bin '
malloc_diag: alloc: 392 bytes (4 blocks), free: 15984 bytes (1 blocks)
malloc_diag: alloc: 408 bytes (5 blocks), free: 15968 bytes (1 blocks)
file_open: dev=hda1, path=/boot/memtest86+.bin
pio_packet: no drq after sending packet
print_status: IDE: status=0x51, err=0x20
atapi_request_sense: 70 00 02 00 00 00 00 0e 00 00 00 00 3a 00 00 00 00 00 
atapi_detect_medium: Device reports MEDIUM NOT PRESENT
Media detection failed
devopen: failed to open ide
malloc_diag: alloc: 392 bytes (4 blocks), free: 15984 bytes (1 blocks)
malloc_diag: alloc: 352 bytes (3 blocks), free: 16024 bytes (1 blocks)
Ubuntu LB, kernel 2.6.21-rc3

Error 27: Unrecognized command

Press any key to continue...


More information about the coreboot mailing list