[LinuxBIOS] How to enable VGA on Tyan S3992?
Feng, Libo
Libo.Feng at amd.com
Thu Apr 26 09:39:15 CEST 2007
My colleagues are using the board, so I have to wait.
Mr. Lu, you mean ATI card is attached to PCIX of 5780? I am confused.
Best Regards
??? Feng Libo @ AMD Ext: 20906
Mobile Phone: 13683249071
Office Phone: 0086-010-62801406
-----Original Message-----
From: yhlu [mailto:yinghailu at gmail.com]
Sent: Thursday, April 26, 2007 10:41 AM
To: Feng, Libo
Cc: tsylla at gmail.com; linuxbios at linuxbios.org
Subject: Re: How to enable VGA on Tyan S3992?
please try
chip southbridge/broadcom/bcm5780 # HT2000
device pci 0.0 on end # PXB 1 0x0130
device pci 1.0 on # PXB 2 0x0130
device pci 4.0 on end # GB E 0x1668 vid = 0x14e4
device pci 4.1 on end # GB E 0x1669 vid = 0x14e4
end
device pci 2.0 on end # PCI E 1 #0x0132
device pci 3.0 on end # PCI E 2
device pci 4.0 on end # PCI E 3
device pci 5.0 on end # PCI E 4
chip drivers/pci/onboard
device pci 6.0 on end
register "rom_address" = "0xfff80000"
end
end
YH
On 4/25/07, Feng, Libo <Libo.Feng at amd.com> wrote:
> In Option.lb,
>
> default HT_CHAIN_UNITID_BASE=0x06
> default HT_CHAIN_END_UNITID_BASE=0x01
> default SB_HT_CHAIN_ON_BUS0=2
> Just as Mr. Tom Sylla's setting.
>
> I had tried the device numbers of 3, a and b respectively, it still didn't work. The attached is the boot log with the device number of b. There is totally no boot log if with the device number of a.
>
>
> Best Regards
>
> ??? Feng Libo @ AMD Ext: 20906
> Mobile Phone: 13683249071
> Office Phone: 0086-010-62801406
>
> -----Original Message-----
> From: yhlu [mailto:yinghailu at gmail.com]
> Sent: Thursday, April 26, 2007 12:15 AM
> To: Feng, Libo
> Cc: linuxbios at linuxbios.org
> Subject: Re: How to enable VGA on Tyan S3992?
>
> did you try
> chip drivers/pci/onboard
> device pci a.0 on end
> register "rom_address" = "0xfff80000" #512k image
> end
>
> or
> chip drivers/pci/onboard
> device pci b.0 on end
> register "rom_address" = "0xfff80000" #512k image
> end
>
> etc...
>
> let me know your HT_CHAIN_END_UNITID_BASE and HT_CHAIN_UNITID_BASE in Option.lb.
> also boot log in serial port.
>
> YH
>
>
> YH
>
>
>
>
More information about the coreboot
mailing list