[LinuxBIOS] Setting up ethernet - help

[Peter Stuge]

On Tue, Aug 14, 2007 at 12:30:14PM -0400, Joseph Smith wrote:
> > On Tue, Aug 14, 2007 at 12:06:25PM -0400, Joseph Smith wrote:
> >> lspci-tvv
> >> -[0000:00]-+-1e.0-[0000:01]----08.0  Intel Corporation 82801DB PRO/100
> >> VE (CNR) Ethernet Controller
> >>
> >> How the heck do I set this up in Config.lb? HELP??
> >
> > Looks like it's been done before:
> >
> > --8<-- src/mainboard/asus/mew-vm/Config.lb
> > chip southbridge/intel/i82801xx # Southbridge
> >   device pci 1e.0 on # PCI Bridge
> >     #chip drivers/pci/onboard
> >     #       device pci 1.0 on end
> >     #       register "rom_address" = "0xfff80000"
> >     #end
> >   end
> > ..
> > end
> > -->8--
> 
> Does that mean I would have to cat in a ethernet rom?

Do you or the chip need one? Is there one in the factory BIOS or in a
standalone flash chip or none at all?


> Also, wouldn't it be device pci 08.0 on end

Yep. I only looked for the PCI-PCI bridge.


//Peter