[LinuxBIOS] LinuxBios with SuperIO Winbond W83627HG-AW
Marc Jones
marc.jones at amd.com
Mon Aug 27 23:22:17 CEST 2007
Steffen D. wrote:
> Dear Mailinglist,
>
> im trying to build a bios for GeodeLX cpu. I have a development board
> from LogicPC. Afaik this is the same board that was used for the
> development for OLCP.
> I try it with the svn version Linuxbios-3. I have made a image with make
> menuconfig and configured everything cleary for the geodelx board. I
> flash the rom with windows and a galep 5 flash device.
> Im very sure that the flashing works because i can clone the bios which
> comes with the board.
>
> I dont get any output over rs232.
>
> Im using SST 49LF004B roms with 4mbit. Maybe here is the problem? I have
> made linuxbios.rom with a target size of 2mb. I also tryed "cat
> linuxbios.rom linuxbios.rom > linuxbios4m.rom". I found this hin here in
> the ml.
>
> Every help is welcome!
>
> Regards,
>
> Steffen
>
Steffen,
Use linuxBIOS v2 and buildrom to build GeodeLX platforms. Start with the
amd/norwich or amd/db800 mainboards.
Marc
--
Marc Jones
Senior Firmware Engineer
(970) 226-9684 Office
mailto:Marc.Jones at amd.com
http://www.amd.com/embeddedprocessors
More information about the coreboot
mailing list