[LinuxBIOS] flashrom fails on GA-M57SLI with 1MB ROM

[Andreas B. Mundt]

On Sat, Dec 01, 2007 at 10:11:36AM +0100, Andreas B. Mundt wrote:
> Hi,
> 
> building a LAB-image with buildrom (I had to do this on an other
> 32-bit machine) flashing now works for me, too. I tried to find out
> why, but so far without success. Some configuration might differ? 




Hey,

I found the difference in the builds:

===================================================================
--- src/mainboard/gigabyte/m57sli/Config.lb     (revision 2994)
+++ src/mainboard/gigabyte/m57sli/Config.lb     (working copy)
@@ -310,7 +310,7 @@
                                        # SIO pin set 1 input mode
                                                                #irq 0xc8 = 0x0
                                        # SIO pin set 2 mixed input/output mode
-                                                               irq 0xc9 = 0x40
+                                                               irq 0xc9 = 0x0
                                        # SIO pin set 4 input mode
                                                                #irq 0xcb = 0x0
                                        # Generate SMI# on EC IRQ


This has been changed in rev 2972. Buildrom has still the 'old'
version. Flashing works fine for me if irq 0xc9 = 0x0 is set. With irq
0xc9 = 0x40 it fails. 

Could somebody check if flashing really works for some m57sli-boards
(LPC) with the latest revision (irq 0xc9 = 0x40)?  

Thanks,

	Andi