[LinuxBIOS] alix and Artec LPC dongle [was: LPC.1A adapter?]
Peter Stuge
peter at stuge.se
Thu Dec 6 06:35:55 CET 2007
On Thu, Dec 06, 2007 at 06:24:25AM +0100, Peter Stuge wrote:
> GND 9 10 VCC3 in
>
> 441103-alix1c:
> 1-13 2-3 3-5 4-7 5-9 6-11 8-1 9-2/4/6/8/10/12/17 10-nc -15/18
>
> Note that the above cable can supply power to the LPC dongle.
Note that it can not. Sorry. I am too tired.
I left 10 not connected specifically to avoid the problem, since I
think I'll usually be powering the LPC dongle from USB.
The dongle needs 200ms or so to boot, so it has to be powered up
before the target board. I like pulling the power when trying a
newly flashed LB so dongle has to get power from somewhere else.
//Peter
More information about the coreboot
mailing list