[LinuxBIOS] Problem with FILO

[Uwe Hermann]

On Fri, Jun 01, 2007 at 11:44:13AM -0300, Otávio Alcântara wrote:
> Hello,
> 
>         I've setup a linuxbios rom, based on norwich board support, for a
> board with Geode LX + CS5536. I works right until starting the Linux with
> FILO. FILO claims that can't recognize my filesystem. I've setup the option
> FSYS_EXT2FS = 1 on Config file of Filo, and my image is EXT2 formatted.
>          Is there any other option that need to be setted? Is possible to
> choose more than one file system, I mean, FAT and EXT2?

Yes, there's an option in FILO's 'Config' file for that.

Where's your ext2-formatted disk? /dev/hda1?

Please post the 'Config' file from FILO you were using as well as the
exact error message (or better: full boot log) you get.


Thanks, Uwe.
-- 
http://www.hermann-uwe.de  | http://www.holsham-traders.de
http://www.crazy-hacks.org | http://www.unmaintained-free-software.org
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 189 bytes
Desc: Digital signature
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20070603/8bc7f724/attachment.sig>