[LinuxBIOS] The purpose of linuxbios_init
Stefan Reinauer
stepan at coresystems.de
Wed Jun 6 16:13:26 CEST 2007
* Peter Stuge <stuge-linuxbios at cdy.org> [070606 15:24]:
> Still spot on.
>
> If there is LB in flash already, the mainboard model and flash enable
> sequence is determined from that.
>
> Note that this needs an override with -m if the LB chip is being
> reflashed in a different board than it's intended to be used with.
I think you have to say -f, not -m. Since -m is the board specific
enable sequence and the type is determined from ram, not the image.
Stefan
--
coresystems GmbH • Brahmsstr. 16 • D-79104 Freiburg i. Br.
Tel.: +49 761 7668825 • Fax: +49 761 7664613
Email: info at coresystems.de • http://www.coresystems.de/
Registergericht: Amtsgericht Freiburg • HRB 7656
Geschäftsführer: Stefan Reinauer • Ust-IdNr.: DE245674866
More information about the coreboot
mailing list