[LinuxBIOS] Flashing with flashrom ok but no debug on com port
stepan at coresystems.de
Thu Mar 22 14:12:04 CET 2007
* ccases at navista.fr <ccases at navista.fr> [070322 11:20]:
> Hi all,
> I have successfully flash LinuxBIOS on my chip SST39SF020A with flashrom,
> when I reboot my card, I have no visual response, after that I use an Null
> modem db9 wire between my card with LinuxBios et my computer. I have use
> Hyperterminal with parameter 115200 baud, 8bit, no parity, 1 bit stop, and
> after reboot my card, I have nothing ...
> I don't know why, in my config file I have set normally the good line for
> active the com port in debug mode, but if somebody know all of the
> modification for check if it's ok, it's welcome ;).
> thanks by advance for your help.
> PS : my card is an advantech pcm-5823
It's a geode gx1?
This looks like you did not initialize the SuperIO correctly.
What SuperIO do you have on the board?
coresystems GmbH • Brahmsstr. 16 • D-79104 Freiburg i. Br.
Tel.: +49 761 7668825 • Fax: +49 761 7664613
Email: info at coresystems.de • http://www.coresystems.de/
More information about the coreboot