[LinuxBIOS] r2624 - trunk/LinuxBIOSv2/util/flashrom

[svn at openbios.org]

Author: uwe
Date: 2007-05-03 12:09:23 +0200 (Thu, 03 May 2007)
New Revision: 2624

Modified:
   trunk/LinuxBIOSv2/util/flashrom/README
   trunk/LinuxBIOSv2/util/flashrom/board_enable.c
Log:
Enable flashing on the IWILL DK8-HTX board by configuring the Super I/O
to set the right GPIO pins, so write protection is disabled.

Signed-off-by: Mondrian Nuessle <nuessle at uni-mannheim.de>
Signed-off-by: Uwe Hermann <uwe at hermann-uwe.de>
Acked-by: Stefan Reinauer <stepan at coresystems.de>



Modified: trunk/LinuxBIOSv2/util/flashrom/README
===================================================================
--- trunk/LinuxBIOSv2/util/flashrom/README	2007-05-03 08:50:37 UTC (rev 2623)
+++ trunk/LinuxBIOSv2/util/flashrom/README	2007-05-03 10:09:23 UTC (rev 2624)
@@ -47,7 +47,13 @@
 
   flashrom -w --mainboard ISLAND:ARUMA island_aruma.rom
 
+The following boards require the specification of the board name, if
+no LinuxBIOS table is found:
 
+* IWILL DK8-HTX: use -m iwill:dk8_htx
+* agami Aruma: use -m AGAMI:ARUMA
+
+
 ROM Layout Support
 ------------------
 

Modified: trunk/LinuxBIOSv2/util/flashrom/board_enable.c
===================================================================
--- trunk/LinuxBIOSv2/util/flashrom/board_enable.c	2007-05-03 08:50:37 UTC (rev 2623)
+++ trunk/LinuxBIOSv2/util/flashrom/board_enable.c	2007-05-03 10:09:23 UTC (rev 2624)
@@ -23,6 +23,56 @@
 #include "flash.h"
 #include "debug.h"
 
+static int board_iwill_dk8_htx(const char *name)
+{
+	/* Extended function index register, either 0x2e or 0x4e. */
+#define EFIR 0x2e
+	/* Extended function data register, one plus the index reg. */
+#define EFDR EFIR + 1
+	char b;
+
+	/* Disable the flash write protect (which is connected to the
+	 * Winbond W83627HF GPIOs).
+	 */
+	outb(0x87, EFIR);	/* Sequence to unlock extended functions */
+	outb(0x87, EFIR);
+
+	/* Activate logical device. */
+	outb(0x7, EFIR);
+	outb(8, EFDR);
+
+	/* Set GPIO regs. */
+	outb(0x2b, EFIR);	/* GPIO multiplexed pin reg. */
+	b = inb(EFDR) | 0xd0;
+	outb(0x2b, EFIR);
+	outb(b, EFDR);
+
+	outb(0x30, EFIR);	/* GPIO2 */
+	b = inb(EFDR) | 0x01;
+	outb(0x30, EFIR);
+	outb(b, EFDR);
+
+	outb(0xf0, EFIR);	/* IO sel */
+	b = inb(EFDR) | 0xef;
+	outb(0xf0, EFIR);
+	outb(b, EFDR);
+
+	outb(0xf1, EFIR);	/* GPIO data reg */
+	b = inb(EFDR) | 0x16;
+	outb(0xf1, EFIR);
+	outb(b, EFDR);
+
+	outb(0xf2, EFIR);	/* GPIO inversion reg */
+	b = inb(EFDR) | 0x00;
+	outb(0xf2, EFIR);
+	outb(b, EFDR);
+
+	/* Lock extended functions again. */
+	outb(0xaa, EFIR);	/* Command to exit extended functions */
+
+	return 0;
+}
+
 /*
  * Match on pci-ids, no report received, just data from the mainboard
  * specific code:
@@ -195,14 +245,16 @@
 };
 
 struct board_pciid_enable board_pciid_enables[] = {
-        { 0x1022, 0x746B, 0x1022, 0x36C0,  0x0000, 0x0000, 0x0000, 0x0000,
-		"AGAMI", "ARUMA", "Agami Aruma", board_agami_aruma },
-        { 0x1106, 0x3177, 0x1106, 0xAA01,  0x1106, 0x3123, 0x1106, 0xAA01, 
+	{ 0x1022, 0x746B, 0x1022, 0x36C0,  0x0000, 0x0000, 0x0000, 0x0000,
+		"AGAMI", "ARUMA", "agami Aruma", board_agami_aruma },
+	{ 0x1106, 0x3177, 0x1106, 0xAA01,  0x1106, 0x3123, 0x1106, 0xAA01, 
 		NULL, NULL, "VIA EPIA M/MII/...", board_via_epia_m },
-        { 0x1106, 0x3177, 0x1043, 0x80A1,  0x1106, 0x3205, 0x1043, 0x8118, 
-		NULL, NULL, "Asus A7V8-MX SE", board_asus_a7v8x_mx },
+	{ 0x1106, 0x3177, 0x1043, 0x80A1,  0x1106, 0x3205, 0x1043, 0x8118, 
+		NULL, NULL, "ASUS A7V8-MX SE", board_asus_a7v8x_mx },
+	{ 0x1022, 0x7468, 0x0, 0x0,  0x0, 0x0, 0x0, 0x0,
+		"iwill", "dk8_htx", "IWILL DK8-HTX", board_iwill_dk8_htx },
+
         { 0, 0, 0, 0,  0, 0, 0, 0, NULL, NULL } /* Keep this */
-
 };
 
 /*