[LinuxBIOS] set fiv fail
Feng, Libo
Libo.Feng at amd.com
Tue May 8 06:27:24 CEST 2007
Our GCC is 4.0.0. We will try a new version GCC. Thank you.
Best Regards
丰立波 Feng Libo @ AMD Ext: 20906
Mobile Phone: 13683249071
Office Phone: 0086-010-62801406
-----Original Message-----
From: yhlu [mailto:yinghailu at gmail.com]
Sent: Tuesday, May 08, 2007 12:14 PM
To: Feng, Libo
Cc: AlexHuang; linuxbios at linuxbios.org
Subject: Re: [LinuxBIOS] set fiv fail
Alex's problem: the SPDROM address setting is not right. So can not find RAM.
I wonder what is your gcc version. Please use fcc 4.0.2 or 4.1.1. Some gcc make bad optimizaiton.
YH
On 5/7/07, Feng, Libo <Libo.Feng at amd.com> wrote:
>
>
> Yes, we also met the second problem mentioned. It is caused by the DQS
> write and read training failure, but we didn't know how to fix it
> because RAM initialization is very complicated. Then we wanted to get
> more trace information, so we enabled DQS_TRAIN_DEBUG in
> /amd/amdk8/raminit_f_dqs.c, it was a big surprise that the RAM
> initialization was passed. All were done based on AMD Athlon 64x2.
> Just for your reference. Mr. Lu Yinghai owns the file, maybe he can give more technical explanation.
>
>
>
> Best Regards
>
> 丰立波 Feng Libo @ AMD Ext: 20906
> Mobile Phone: 13683249071
> Office Phone: 0086-010-62801406
>
>
> ________________________________
> From: linuxbios-bounces+libo.feng=amd.com at linuxbios.org
> [mailto:linuxbios-bounces+libo.feng=amd.com at linuxbios.org]
> On Behalf Of AlexHuang
> Sent: Monday, April 30, 2007 5:19 PM
> To: linuxbios at linuxbios.org
> Subject: [LinuxBIOS] set fiv fail
>
>
>
>
>
> Hi all,
>
> I got an error message from linuxbios as below:
>
> The CPU on my platform is Sempron. Why do I get "set fid failed for
> apicid =00" and how to solve this issue??
>
> On the other hand, I got error message as follow:
>
> Ram2.00
>
> No memory for this cpu
>
>
>
> I have no idea how to solve this issue. Can somebody give me a
> suggestion how to find the bug out??
>
> Thanks for your help
>
> Alex
>
>
>
>
> LinuxBIOS-1.1.8_m57sli_Fallback 一 16:26:52 CST 2007 starting...
>
> *sysinfo range: [000cf000,000cf730)
>
> bsp_apicid=00
>
> core0 started:
>
> started ap apicid: 01
>
> SBLink=00
>
> NC node|link=00
>
> begin msr fid, vid 31061212060e0202
>
> set fid failed for apicid =00
>
> end msr fid, vid 31061206060e0202
>
> mcp55_num:00
>
> ht reset -
>
> SMBus controller enabled
>
> Ram1.00
>
> Ram2.00
>
> No memory for this cpu
>
> Ram3
>
> No memory
>
>
More information about the coreboot
mailing list