[LinuxBIOS] r2649 - trunk/LinuxBIOSv2/src/northbridge/amd/lx
svn at openbios.org
svn at openbios.org
Thu May 10 20:16:03 CEST 2007
Author: stepan
Date: 2007-05-10 20:16:03 +0200 (Thu, 10 May 2007)
New Revision: 2649
Modified:
trunk/LinuxBIOSv2/src/northbridge/amd/lx/chip.h
trunk/LinuxBIOSv2/src/northbridge/amd/lx/grphinit.c
trunk/LinuxBIOSv2/src/northbridge/amd/lx/northbridge.c
trunk/LinuxBIOSv2/src/northbridge/amd/lx/northbridge.h
trunk/LinuxBIOSv2/src/northbridge/amd/lx/northbridgeinit.c
trunk/LinuxBIOSv2/src/northbridge/amd/lx/pll_reset.c
trunk/LinuxBIOSv2/src/northbridge/amd/lx/raminit.c
trunk/LinuxBIOSv2/src/northbridge/amd/lx/raminit.h
Log:
Fix the indent and whitespace to match LinuxBIOS standards
Signed-off-by: Jordan Crouse <jordan.crouse at amd.com>
Acked-by: Stefan Reinauer <stepan at coresystems.de>
Modified: trunk/LinuxBIOSv2/src/northbridge/amd/lx/chip.h
===================================================================
--- trunk/LinuxBIOSv2/src/northbridge/amd/lx/chip.h 2007-05-10 18:00:24 UTC (rev 2648)
+++ trunk/LinuxBIOSv2/src/northbridge/amd/lx/chip.h 2007-05-10 18:16:03 UTC (rev 2649)
@@ -18,8 +18,7 @@
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-struct northbridge_amd_lx_config
-{
+struct northbridge_amd_lx_config {
};
Modified: trunk/LinuxBIOSv2/src/northbridge/amd/lx/grphinit.c
===================================================================
--- trunk/LinuxBIOSv2/src/northbridge/amd/lx/grphinit.c 2007-05-10 18:00:24 UTC (rev 2648)
+++ trunk/LinuxBIOSv2/src/northbridge/amd/lx/grphinit.c 2007-05-10 18:16:03 UTC (rev 2649)
@@ -23,42 +23,40 @@
#include <cpu/amd/vr.h>
#include <console/console.h>
-
/*
- * This function mirrors the Graphics_Init routine in GeodeROM.
- */
+ * This function mirrors the Graphics_Init routine in GeodeROM.
+ */
void graphics_init(void)
{
uint16_t wClassIndex, wData, res;
-
+
/* SoftVG initialization */
printk_debug("Graphics init...\n");
/* Call SoftVG with the main configuration parameters. */
/* NOTE: SoftVG expects the memory size to be given in 2MB blocks */
-
- wClassIndex = (VRC_VG << 8) + VG_CONFIG;
-
+
+ wClassIndex = (VRC_VG << 8) + VG_CONFIG;
+
/*
- * Graphics Driver Enabled (13) 0, NO (lets BIOS controls the GP)
- * External Monochrome Card Support(12) 0, NO
- * Controller Priority Select(11) 1, Primary
- * Display Select(10:8) 0x0, CRT
- * Graphics Memory Size(7:1) CONFIG_VIDEO_MB >> 1,
- * defined in mainboard/../Options.lb
- * PLL Reference Clock Bypass(0) 0, Default
+ * Graphics Driver Enabled (13) 0, NO (lets BIOS controls the GP)
+ * External Monochrome Card Support(12) 0, NO
+ * Controller Priority Select(11) 1, Primary
+ * Display Select(10:8) 0x0, CRT
+ * Graphics Memory Size(7:1) CONFIG_VIDEO_MB >> 1,
+ * defined in mainboard/../Options.lb
+ * PLL Reference Clock Bypass(0) 0, Default
*/
/* Video RAM has to be given in 2MB chunks
* the value is read @ 7:1 (value in 7:0 looks like /2)
* so we can add the real value in megabytes
*/
-
- wData = VG_CFG_DRIVER | VG_CFG_PRIORITY | VG_CFG_DSCRT | (CONFIG_VIDEO_MB & VG_MEM_MASK);
+
+ wData = VG_CFG_DRIVER | VG_CFG_PRIORITY |
+ VG_CFG_DSCRT | (CONFIG_VIDEO_MB & VG_MEM_MASK);
vrWrite(wClassIndex, wData);
-
+
res = vrRead(wClassIndex);
printk_debug("VRC_VG value: 0x%04x\n", res);
}
-
-
Modified: trunk/LinuxBIOSv2/src/northbridge/amd/lx/northbridge.c
===================================================================
--- trunk/LinuxBIOSv2/src/northbridge/amd/lx/northbridge.c 2007-05-10 18:00:24 UTC (rev 2648)
+++ trunk/LinuxBIOSv2/src/northbridge/amd/lx/northbridge.c 2007-05-10 18:16:03 UTC (rev 2649)
@@ -35,12 +35,11 @@
#include "chip.h"
#include "northbridge.h"
-
/* here is programming for the various MSRs.*/
#define IM_QWAIT 0x100000
-#define DMCF_WRITE_SERIALIZE_REQUEST (2<<12) /* 2 outstanding */ /* in high */
-#define DMCF_SERIAL_LOAD_MISSES (2) /* enabled */
+#define DMCF_WRITE_SERIALIZE_REQUEST (2<<12) /* 2 outstanding */ /* in high */
+#define DMCF_SERIAL_LOAD_MISSES (2) /* enabled */
/* these are the 8-bit attributes for controlling RCONF registers */
#define CACHE_DISABLE (1<<0)
@@ -87,33 +86,36 @@
struct msr_defaults {
int msr_no;
msr_t msr;
-} msr_defaults [] = {
- {0x1700, {.hi = 0, .lo = IM_QWAIT}},
- {0x1800, {.hi = DMCF_WRITE_SERIALIZE_REQUEST, .lo = DMCF_SERIAL_LOAD_MISSES}},
- /* 1808 will be done down below, so we have to do 180a->1817 (well, 1813 really) */
- /* for 180a, for now, we assume VSM will configure it */
- /* 180b is left at reset value,a0000-bffff is non-cacheable */
- /* 180c, c0000-dffff is set to write serialize and non-cachable */
- /* oops, 180c will be set by cpu bug handling in cpubug.c */
- //{0x180c, {.hi = MSR_WS_CD_DEFAULT, .lo = MSR_WS_CD_DEFAULT}},
- /* 180d is left at default, e0000-fffff is non-cached */
-
- /* we will assume 180e, the ssm region configuration, is left at default or set by VSM */
- /* we will not set 0x180f, the DMM,yet */
- //{0x1810, {.hi=0xee7ff000, .lo=RRCF_LOW(0xee000000, WRITE_COMBINE|CACHE_DISABLE)}},
- //{0x1811, {.hi = 0xefffb000, .lo = RRCF_LOW_CD(0xefff8000)}},
- //{0x1812, {.hi = 0xefff7000, .lo = RRCF_LOW_CD(0xefff4000)}},
- //{0x1813, {.hi = 0xefff3000, .lo = RRCF_LOW_CD(0xefff0000)}},
- /* now for GLPCI routing */
- /* GLIU0 */
- P2D_BM(MSR_GLIU0_BASE1, 0x1, 0x0, 0x0, 0xfff80),
- P2D_BM(MSR_GLIU0_BASE2, 0x1, 0x0, 0x80000, 0xfffe0),
- P2D_SC(MSR_GLIU0_SHADOW, 0x1, 0x0, 0x0, 0xff03, 0xC0000),
- /* GLIU1 */
- P2D_BM(MSR_GLIU1_BASE1, 0x1, 0x0, 0x0, 0xfff80),
- P2D_BM(MSR_GLIU1_BASE2, 0x1, 0x0, 0x80000, 0xfffe0),
- P2D_SC(MSR_GLIU1_SHADOW, 0x1, 0x0, 0x0, 0xff03, 0xC0000),
- {0}
+} msr_defaults[] = {
+ {
+ 0x1700, {
+ .hi = 0,.lo = IM_QWAIT}}, {
+ 0x1800, {
+ .hi = DMCF_WRITE_SERIALIZE_REQUEST,.lo =
+ DMCF_SERIAL_LOAD_MISSES}},
+ /* 1808 will be done down below, so we have to do 180a->1817 (well, 1813 really) */
+ /* for 180a, for now, we assume VSM will configure it */
+ /* 180b is left at reset value,a0000-bffff is non-cacheable */
+ /* 180c, c0000-dffff is set to write serialize and non-cachable */
+ /* oops, 180c will be set by cpu bug handling in cpubug.c */
+ //{0x180c, {.hi = MSR_WS_CD_DEFAULT, .lo = MSR_WS_CD_DEFAULT}},
+ /* 180d is left at default, e0000-fffff is non-cached */
+ /* we will assume 180e, the ssm region configuration, is left at default or set by VSM */
+ /* we will not set 0x180f, the DMM,yet */
+ //{0x1810, {.hi=0xee7ff000, .lo=RRCF_LOW(0xee000000, WRITE_COMBINE|CACHE_DISABLE)}},
+ //{0x1811, {.hi = 0xefffb000, .lo = RRCF_LOW_CD(0xefff8000)}},
+ //{0x1812, {.hi = 0xefff7000, .lo = RRCF_LOW_CD(0xefff4000)}},
+ //{0x1813, {.hi = 0xefff3000, .lo = RRCF_LOW_CD(0xefff0000)}},
+ /* now for GLPCI routing */
+ /* GLIU0 */
+ P2D_BM(MSR_GLIU0_BASE1, 0x1, 0x0, 0x0, 0xfff80),
+ P2D_BM(MSR_GLIU0_BASE2, 0x1, 0x0, 0x80000, 0xfffe0),
+ P2D_SC(MSR_GLIU0_SHADOW, 0x1, 0x0, 0x0, 0xff03, 0xC0000),
+ /* GLIU1 */
+ P2D_BM(MSR_GLIU1_BASE1, 0x1, 0x0, 0x0, 0xfff80),
+ P2D_BM(MSR_GLIU1_BASE2, 0x1, 0x0, 0x80000, 0xfffe0),
+ P2D_SC(MSR_GLIU1_SHADOW, 0x1, 0x0, 0x0, 0xff03, 0xC0000), {
+ 0}
};
/* todo: add a resource record. We don't do this here because this may be called when
@@ -131,14 +133,14 @@
/* dimm 0 */
dimm = msr.hi;
/* installed? */
- if ((dimm & 7) != 7){
+ if ((dimm & 7) != 7) {
sizem = 4 << ((dimm >> 12) & 0x0F);
}
- /* dimm 1*/
+ /* dimm 1 */
dimm = msr.hi >> 16;
/* installed? */
- if ((dimm & 7) != 7){
+ if ((dimm & 7) != 7) {
sizem += 4 << ((dimm >> 12) & 0x0F);
}
@@ -146,27 +148,24 @@
return sizem;
}
-
-
static void enable_shadow(device_t dev)
{
}
-static void northbridge_init(device_t dev)
+static void northbridge_init(device_t dev)
{
//msr_t msr;
printk_spew(">> Entering northbridge.c: %s\n", __FUNCTION__);
-
+
enable_shadow(dev);
/*
* Swiss cheese
*/
//msr = rdmsr(MSR_GLIU0_SHADOW);
-
+
//msr.hi |= 0x3;
//msr.lo |= 0x30000;
-
//printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", MSR_GLIU0_SHADOW, msr.hi, msr.lo);
//printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", MSR_GLIU1_SHADOW, msr.hi, msr.lo);
@@ -180,19 +179,20 @@
last = &dev->resource[dev->resources];
- for(resource = &dev->resource[0]; resource < last; resource++)
- {
+ for (resource = &dev->resource[0]; resource < last; resource++) {
// andrei: do not change the base address, it will make the VSA virtual registers unusable
//pci_set_resource(dev, resource);
// FIXME: static allocation may conflict with dynamic mappings!
}
- for(link = 0; link < dev->links; link++) {
+ for (link = 0; link < dev->links; link++) {
struct bus *bus;
bus = &dev->link[link];
if (bus->children) {
- printk_debug("my_dev_set_resources: assign_resources %d\n", bus);
+ printk_debug
+ ("my_dev_set_resources: assign_resources %d\n",
+ bus);
assign_resources(bus);
}
}
@@ -210,18 +210,18 @@
if (line) {
pci_write_config8(dev, PCI_INTERRUPT_LINE, 0);
}
-
+
/* set the cache line size, so far 64 bytes is good for everyone */
pci_write_config8(dev, PCI_CACHE_LINE_SIZE, 64 >> 2);
}
static struct device_operations northbridge_operations = {
- .read_resources = pci_dev_read_resources,
- .set_resources = northbridge_set_resources,
+ .read_resources = pci_dev_read_resources,
+ .set_resources = northbridge_set_resources,
.enable_resources = pci_dev_enable_resources,
- .init = northbridge_init,
- .enable = 0,
- .ops_pci = 0,
+ .init = northbridge_init,
+ .enable = 0,
+ .ops_pci = 0,
};
static struct pci_driver northbridge_driver __pci_driver = {
@@ -230,35 +230,37 @@
.device = PCI_DEVICE_ID_AMD_LXBRIDGE,
};
-
static void pci_domain_read_resources(device_t dev)
{
- struct resource *resource;
+ struct resource *resource;
printk_spew(">> Entering northbridge.c: %s\n", __FUNCTION__);
- /* Initialize the system wide io space constraints */
- resource = new_resource(dev, IOINDEX_SUBTRACTIVE(0,0));
- resource->limit = 0xffffUL;
- resource->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED;
+ /* Initialize the system wide io space constraints */
+ resource = new_resource(dev, IOINDEX_SUBTRACTIVE(0, 0));
+ resource->limit = 0xffffUL;
+ resource->flags =
+ IORESOURCE_IO | IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED;
- /* Initialize the system wide memory resources constraints */
- resource = new_resource(dev, IOINDEX_SUBTRACTIVE(1,0));
- resource->limit = 0xffffffffULL;
- resource->flags = IORESOURCE_MEM | IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED;
+ /* Initialize the system wide memory resources constraints */
+ resource = new_resource(dev, IOINDEX_SUBTRACTIVE(1, 0));
+ resource->limit = 0xffffffffULL;
+ resource->flags =
+ IORESOURCE_MEM | IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED;
}
static void ram_resource(device_t dev, unsigned long index,
- unsigned long basek, unsigned long sizek)
+ unsigned long basek, unsigned long sizek)
{
- struct resource *resource;
+ struct resource *resource;
- if (!sizek) return;
-
- resource = new_resource(dev, index);
- resource->base = ((resource_t)basek) << 10;
- resource->size = ((resource_t)sizek) << 10;
- resource->flags = IORESOURCE_MEM | IORESOURCE_CACHEABLE |
- IORESOURCE_FIXED | IORESOURCE_STORED | IORESOURCE_ASSIGNED;
+ if (!sizek)
+ return;
+
+ resource = new_resource(dev, index);
+ resource->base = ((resource_t) basek) << 10;
+ resource->size = ((resource_t) sizek) << 10;
+ resource->flags = IORESOURCE_MEM | IORESOURCE_CACHEABLE |
+ IORESOURCE_FIXED | IORESOURCE_STORED | IORESOURCE_ASSIGNED;
}
static void pci_domain_set_resources(device_t dev)
@@ -269,12 +271,11 @@
printk_spew(">> Entering northbridge.c: %s\n", __FUNCTION__);
mc_dev = dev->link[0].children;
- if (mc_dev)
- {
+ if (mc_dev) {
/* Report the memory regions */
idx = 10;
ram_resource(dev, idx++, 0, 640);
- ram_resource(dev, idx++, 1024, (get_systop()- 0x100000)/1024 ); // Systop - 1 MB -> KB
+ ram_resource(dev, idx++, 1024, (get_systop() - 0x100000) / 1024); // Systop - 1 MB -> KB
}
assign_resources(&dev->link[0]);
@@ -295,8 +296,8 @@
printk_debug("Before VSA:\n");
// print_conf();
- do_vsmbios(); // do the magic stuff here, so prepare your tambourine ;)
-
+ do_vsmbios(); // do the magic stuff here, so prepare your tambourine ;)
+
printk_debug("After VSA:\n");
// print_conf();
@@ -308,23 +309,23 @@
{
printk_spew(">> Entering northbridge.c: %s\n", __FUNCTION__);
- max = pci_scan_bus(&dev->link[0], PCI_DEVFN(0, 0), 0xff, max);
- return max;
+ max = pci_scan_bus(&dev->link[0], PCI_DEVFN(0, 0), 0xff, max);
+ return max;
}
static struct device_operations pci_domain_ops = {
- .read_resources = pci_domain_read_resources,
- .set_resources = pci_domain_set_resources,
- .enable_resources = enable_childrens_resources,
- .scan_bus = pci_domain_scan_bus,
- .enable = pci_domain_enable,
-};
+ .read_resources = pci_domain_read_resources,
+ .set_resources = pci_domain_set_resources,
+ .enable_resources = enable_childrens_resources,
+ .scan_bus = pci_domain_scan_bus,
+ .enable = pci_domain_enable,
+};
static void cpu_bus_init(device_t dev)
{
printk_spew(">> Entering northbridge.c: %s\n", __FUNCTION__);
- initialize_cpus(&dev->link[0]);
+ initialize_cpus(&dev->link[0]);
}
static void cpu_bus_noop(device_t dev)
@@ -332,26 +333,26 @@
}
static struct device_operations cpu_bus_ops = {
- .read_resources = cpu_bus_noop,
- .set_resources = cpu_bus_noop,
- .enable_resources = cpu_bus_noop,
- .init = cpu_bus_init,
- .scan_bus = 0,
+ .read_resources = cpu_bus_noop,
+ .set_resources = cpu_bus_noop,
+ .enable_resources = cpu_bus_noop,
+ .init = cpu_bus_init,
+ .scan_bus = 0,
};
static void enable_dev(struct device *dev)
{
- printk_spew(">> Entering northbridge.c: %s with path %d\n",
- __FUNCTION__, dev->path.type);
+ printk_spew(">> Entering northbridge.c: %s with path %d\n",
+ __FUNCTION__, dev->path.type);
- /* Set the operations if it is a special bus type */
+ /* Set the operations if it is a special bus type */
if (dev->path.type == DEVICE_PATH_PCI_DOMAIN)
dev->ops = &pci_domain_ops;
else if (dev->path.type == DEVICE_PATH_APIC_CLUSTER)
- dev->ops = &cpu_bus_ops;
+ dev->ops = &cpu_bus_ops;
}
struct chip_operations northbridge_amd_lx_ops = {
CHIP_NAME("AMD LX Northbridge")
- .enable_dev = enable_dev,
+ .enable_dev = enable_dev,
};
Modified: trunk/LinuxBIOSv2/src/northbridge/amd/lx/northbridge.h
===================================================================
--- trunk/LinuxBIOSv2/src/northbridge/amd/lx/northbridge.h 2007-05-10 18:00:24 UTC (rev 2648)
+++ trunk/LinuxBIOSv2/src/northbridge/amd/lx/northbridge.h 2007-05-10 18:16:03 UTC (rev 2649)
@@ -24,4 +24,4 @@
extern unsigned int lx_scan_root_bus(device_t root, unsigned int max);
int sizeram(void);
-#endif /* NORTHBRIDGE_AMD_LX_H */
+#endif /* NORTHBRIDGE_AMD_LX_H */
Modified: trunk/LinuxBIOSv2/src/northbridge/amd/lx/northbridgeinit.c
===================================================================
--- trunk/LinuxBIOSv2/src/northbridge/amd/lx/northbridgeinit.c 2007-05-10 18:00:24 UTC (rev 2648)
+++ trunk/LinuxBIOSv2/src/northbridge/amd/lx/northbridgeinit.c 2007-05-10 18:16:03 UTC (rev 2649)
@@ -33,7 +33,6 @@
#include <cpu/x86/msr.h>
#include <cpu/x86/cache.h>
-
struct gliutable {
unsigned long desc_name;
unsigned short desc_type;
@@ -41,85 +40,85 @@
};
struct gliutable gliu0table[] = {
- {.desc_name=MSR_GLIU0_BASE1, .desc_type= BM,.hi= MSR_MC + 0x0,.lo= 0x0FFF80}, /* 0-7FFFF to MC*/
- {.desc_name=MSR_GLIU0_BASE2, .desc_type= BM,.hi= MSR_MC + 0x0,.lo=(0x80 << 20) + 0x0FFFE0}, /* 80000-9ffff to Mc*/
- {.desc_name=MSR_GLIU0_SHADOW, .desc_type= SC_SHADOW,.hi= MSR_MC + 0x0,.lo= 0x03}, /* C0000-Fffff split to MC and PCI (sub decode) A0000-Bffff handled by SoftVideo*/
- {.desc_name=MSR_GLIU0_SYSMEM, .desc_type= R_SYSMEM,.hi= MSR_MC,.lo= 0x0}, /* Catch and fix dynamicly.*/
- {.desc_name=MSR_GLIU0_SMM, .desc_type= BMO_SMM,.hi= MSR_MC,.lo= 0x0}, /* Catch and fix dynamicly.*/
- {.desc_name=GLIU0_GLD_MSR_COH,.desc_type= OTHER,.hi= 0x0,.lo= GL0_CPU},
- {.desc_name=GL_END, .desc_type= GL_END,.hi= 0x0,.lo= 0x0},
+ {.desc_name = MSR_GLIU0_BASE1,.desc_type = BM,.hi = MSR_MC + 0x0,.lo = 0x0FFF80}, /* 0-7FFFF to MC */
+ {.desc_name = MSR_GLIU0_BASE2,.desc_type = BM,.hi = MSR_MC + 0x0,.lo = (0x80 << 20) + 0x0FFFE0}, /* 80000-9ffff to Mc */
+ {.desc_name = MSR_GLIU0_SHADOW,.desc_type = SC_SHADOW,.hi = MSR_MC + 0x0,.lo = 0x03}, /* C0000-Fffff split to MC and PCI (sub decode) A0000-Bffff handled by SoftVideo */
+ {.desc_name = MSR_GLIU0_SYSMEM,.desc_type = R_SYSMEM,.hi = MSR_MC,.lo = 0x0}, /* Catch and fix dynamicly. */
+ {.desc_name = MSR_GLIU0_SMM,.desc_type = BMO_SMM,.hi = MSR_MC,.lo = 0x0}, /* Catch and fix dynamicly. */
+ {.desc_name = GLIU0_GLD_MSR_COH,.desc_type = OTHER,.hi = 0x0,.lo =
+ GL0_CPU},
+ {.desc_name = GL_END,.desc_type = GL_END,.hi = 0x0,.lo = 0x0},
};
-
struct gliutable gliu1table[] = {
- {.desc_name=MSR_GLIU1_BASE1,.desc_type= BM,.hi= MSR_GL0 + 0x0,.lo= 0x0FFF80}, /* 0-7FFFF to MC*/
- {.desc_name=MSR_GLIU1_BASE2,.desc_type= BM,.hi= MSR_GL0 + 0x0,.lo= (0x80 << 20) +0x0FFFE0}, /* 80000-9ffff to Mc*/
- {.desc_name=MSR_GLIU1_SHADOW,.desc_type= SC_SHADOW,.hi= MSR_GL0 + 0x0,.lo= 0x03}, /* C0000-Fffff split to MC and PCI (sub decode)*/
- {.desc_name=MSR_GLIU1_SYSMEM,.desc_type= R_SYSMEM,.hi= MSR_GL0,.lo= 0x0}, /* Catch and fix dynamicly.*/
- {.desc_name=MSR_GLIU1_SMM,.desc_type= BM_SMM,.hi= MSR_GL0,.lo= 0x0}, /* Catch and fix dynamicly.*/
- {.desc_name=GLIU1_GLD_MSR_COH,.desc_type= OTHER,.hi= 0x0,.lo= GL1_GLIU0},
- {.desc_name=MSR_GLIU1_FPU_TRAP,.desc_type= SCIO,.hi= (GL1_GLCP << 29) + 0x0,.lo= 0x033000F0}, /* FooGlue FPU 0xF0*/
- {.desc_name=GL_END,.desc_type= GL_END,.hi= 0x0,.lo= 0x0},
+ {.desc_name = MSR_GLIU1_BASE1,.desc_type = BM,.hi = MSR_GL0 + 0x0,.lo = 0x0FFF80}, /* 0-7FFFF to MC */
+ {.desc_name = MSR_GLIU1_BASE2,.desc_type = BM,.hi = MSR_GL0 + 0x0,.lo = (0x80 << 20) + 0x0FFFE0}, /* 80000-9ffff to Mc */
+ {.desc_name = MSR_GLIU1_SHADOW,.desc_type = SC_SHADOW,.hi = MSR_GL0 + 0x0,.lo = 0x03}, /* C0000-Fffff split to MC and PCI (sub decode) */
+ {.desc_name = MSR_GLIU1_SYSMEM,.desc_type = R_SYSMEM,.hi = MSR_GL0,.lo = 0x0}, /* Catch and fix dynamicly. */
+ {.desc_name = MSR_GLIU1_SMM,.desc_type = BM_SMM,.hi = MSR_GL0,.lo = 0x0}, /* Catch and fix dynamicly. */
+ {.desc_name = GLIU1_GLD_MSR_COH,.desc_type = OTHER,.hi = 0x0,.lo =
+ GL1_GLIU0},
+ {.desc_name = MSR_GLIU1_FPU_TRAP,.desc_type = SCIO,.hi = (GL1_GLCP << 29) + 0x0,.lo = 0x033000F0}, /* FooGlue FPU 0xF0 */
+ {.desc_name = GL_END,.desc_type = GL_END,.hi = 0x0,.lo = 0x0},
};
-struct gliutable *gliutables[] = {gliu0table, gliu1table, 0};
+struct gliutable *gliutables[] = { gliu0table, gliu1table, 0 };
struct msrinit {
unsigned long msrnum;
msr_t msr;
};
-struct msrinit ClockGatingDefault [] = {
- {GLIU0_GLD_MSR_PM, {.hi=0x00,.lo=0x0005}},
- {MC_GLD_MSR_PM, {.hi=0x00,.lo=0x0001}},
- {VG_GLD_MSR_PM, {.hi=0x00,.lo=0x0015}},
- {GP_GLD_MSR_PM, {.hi=0x00,.lo=0x0001}},
- {DF_GLD_MSR_PM, {.hi=0x00,.lo=0x0555}},
- {GLIU1_GLD_MSR_PM, {.hi=0x00,.lo=0x0005}},
- {GLCP_GLD_MSR_PM, {.hi=0x00,.lo=0x0014}},
- {GLPCI_GLD_MSR_PM, {.hi=0x00,.lo=0x0015}},
- {VIP_GLD_MSR_PM, {.hi=0x00,.lo=0x0005}},
- {AES_GLD_MSR_PM, {.hi=0x00,.lo=0x0015}},
- {CPU_BC_PMODE_MSR, {.hi=0x00,.lo=0x70303}},
- {0xffffffff, {0xffffffff, 0xffffffff}},
+struct msrinit ClockGatingDefault[] = {
+ {GLIU0_GLD_MSR_PM, {.hi = 0x00,.lo = 0x0005}},
+ {MC_GLD_MSR_PM, {.hi = 0x00,.lo = 0x0001}},
+ {VG_GLD_MSR_PM, {.hi = 0x00,.lo = 0x0015}},
+ {GP_GLD_MSR_PM, {.hi = 0x00,.lo = 0x0001}},
+ {DF_GLD_MSR_PM, {.hi = 0x00,.lo = 0x0555}},
+ {GLIU1_GLD_MSR_PM, {.hi = 0x00,.lo = 0x0005}},
+ {GLCP_GLD_MSR_PM, {.hi = 0x00,.lo = 0x0014}},
+ {GLPCI_GLD_MSR_PM, {.hi = 0x00,.lo = 0x0015}},
+ {VIP_GLD_MSR_PM, {.hi = 0x00,.lo = 0x0005}},
+ {AES_GLD_MSR_PM, {.hi = 0x00,.lo = 0x0015}},
+ {CPU_BC_PMODE_MSR, {.hi = 0x00,.lo = 0x70303}},
+ {0xffffffff, {0xffffffff, 0xffffffff}},
};
/* */
/* SET GeodeLink PRIORITY*/
/* */
-struct msrinit GeodeLinkPriorityTable [] = {
- {CPU_GLD_MSR_CONFIG, {.hi=0x00,.lo=0x0220}},
- {DF_GLD_MSR_MASTER_CONF, {.hi=0x00,.lo=0x0000}},
- {VG_GLD_MSR_CONFIG, {.hi=0x00,.lo=0x0720}},
- {GP_GLD_MSR_CONFIG, {.hi=0x00,.lo=0x0010}},
- {GLPCI_GLD_MSR_CONFIG, {.hi=0x00,.lo=0x0017}},
- {GLCP_GLD_MSR_CONF, {.hi=0x00,.lo=0x0001}},
- {VIP_GLD_MSR_CONFIG, {.hi=0x00,.lo=0x0622}},
- {AES_GLD_MSR_CONFIG, {.hi=0x00,.lo=0x0013}},
- {0x0FFFFFFFF, {0x0FFFFFFFF, 0x0FFFFFFFF}}, /* END*/
+struct msrinit GeodeLinkPriorityTable[] = {
+ {CPU_GLD_MSR_CONFIG, {.hi = 0x00,.lo = 0x0220}},
+ {DF_GLD_MSR_MASTER_CONF, {.hi = 0x00,.lo = 0x0000}},
+ {VG_GLD_MSR_CONFIG, {.hi = 0x00,.lo = 0x0720}},
+ {GP_GLD_MSR_CONFIG, {.hi = 0x00,.lo = 0x0010}},
+ {GLPCI_GLD_MSR_CONFIG, {.hi = 0x00,.lo = 0x0017}},
+ {GLCP_GLD_MSR_CONF, {.hi = 0x00,.lo = 0x0001}},
+ {VIP_GLD_MSR_CONFIG, {.hi = 0x00,.lo = 0x0622}},
+ {AES_GLD_MSR_CONFIG, {.hi = 0x00,.lo = 0x0013}},
+ {0x0FFFFFFFF, {0x0FFFFFFFF, 0x0FFFFFFFF}}, /* END */
};
extern int sizeram(void);
-static void
-writeglmsr(struct gliutable *gl){
+static void writeglmsr(struct gliutable *gl)
+{
msr_t msr;
msr.lo = gl->lo;
msr.hi = gl->hi;
wrmsr(gl->desc_name, msr); // MSR - see table above
- printk_debug("%s: MSR 0x%08x, val 0x%08x:0x%08x\n", __FUNCTION__, gl->desc_name, msr.hi, msr.lo); // GX3
+ printk_debug("%s: MSR 0x%08x, val 0x%08x:0x%08x\n", __FUNCTION__, gl->desc_name, msr.hi, msr.lo); // GX3
}
-static void
-ShadowInit(struct gliutable *gl)
+static void ShadowInit(struct gliutable *gl)
{
msr_t msr;
msr = rdmsr(gl->desc_name);
if (msr.lo == 0) {
- writeglmsr(gl);
+ writeglmsr(gl);
}
}
@@ -129,8 +128,8 @@
msr_t msr;
int sizembytes, sizebytes;
- /*
- * Figure out how much RAM is in the machine and alocate all to the
+ /*
+ * Figure out how much RAM is in the machine and alocate all to the
* system. We will adjust for SMM now and Frame Buffer later.
*/
sizembytes = sizeram();
@@ -141,25 +140,26 @@
printk_debug("usable RAM: %d bytes\n", sizebytes);
/* 20 bit address The bottom 12 bits go into bits 20-31 in msr.lo
- The top 8 bits go into 0-7 of msr.hi. */
+ The top 8 bits go into 0-7 of msr.hi. */
sizebytes--;
msr.hi = (gl->hi & 0xFFFFFF00) | (sizebytes >> 24);
- sizebytes <<= 8; /* move bits 23:12 in bits 31:20. */
+ sizebytes <<= 8; /* move bits 23:12 in bits 31:20. */
sizebytes &= 0xfff00000;
- sizebytes |= 0x100; /* start at 1MB */
+ sizebytes |= 0x100; /* start at 1MB */
msr.lo = sizebytes;
wrmsr(gl->desc_name, msr); // MSR - see table above
printk_debug("%s: MSR 0x%08x, val 0x%08x:0x%08x\n", __FUNCTION__,
- gl->desc_name, msr.hi, msr.lo);
+ gl->desc_name, msr.hi, msr.lo);
}
-static void SMMGL0Init(struct gliutable *gl) {
+static void SMMGL0Init(struct gliutable *gl)
+{
msr_t msr;
- int sizebytes = sizeram()<<20;
+ int sizebytes = sizeram() << 20;
long offset;
- sizebytes -= (SMM_SIZE*1024);
+ sizebytes -= (SMM_SIZE * 1024);
printk_debug("%s: %d bytes\n", __FUNCTION__, sizebytes);
@@ -169,51 +169,55 @@
printk_debug("%s: offset is 0x%08x\n", __FUNCTION__, SMM_OFFSET);
msr.hi = offset << 8 | gl->hi;
- msr.hi |= SMM_OFFSET>>24;
+ msr.hi |= SMM_OFFSET >> 24;
msr.lo = SMM_OFFSET << 8;
- msr.lo |= ((~(SMM_SIZE*1024)+1)>>12)&0xfffff;
-
+ msr.lo |= ((~(SMM_SIZE * 1024) + 1) >> 12) & 0xfffff;
+
wrmsr(gl->desc_name, msr); // MSR - See table above
- printk_debug("%s: MSR 0x%08x, val 0x%08x:0x%08x\n", __FUNCTION__, gl->desc_name, msr.hi, msr.lo);
+ printk_debug("%s: MSR 0x%08x, val 0x%08x:0x%08x\n", __FUNCTION__,
+ gl->desc_name, msr.hi, msr.lo);
}
-static void SMMGL1Init(struct gliutable *gl) {
+static void SMMGL1Init(struct gliutable *gl)
+{
msr_t msr;
- printk_debug("%s:\n", __FUNCTION__ );
+ printk_debug("%s:\n", __FUNCTION__);
msr.hi = gl->hi;
/* I don't think this is needed */
msr.hi &= 0xffffff00;
msr.hi |= (SMM_OFFSET >> 24);
msr.lo = (SMM_OFFSET << 8) & 0xFFF00000;
- msr.lo |= ((~(SMM_SIZE*1024)+1)>>12)&0xfffff;
-
+ msr.lo |= ((~(SMM_SIZE * 1024) + 1) >> 12) & 0xfffff;
+
wrmsr(gl->desc_name, msr); // MSR - See table above
- printk_debug("%s: MSR 0x%08x, val 0x%08x:0x%08x\n", __FUNCTION__, gl->desc_name, msr.hi, msr.lo);
+ printk_debug("%s: MSR 0x%08x, val 0x%08x:0x%08x\n", __FUNCTION__,
+ gl->desc_name, msr.hi, msr.lo);
}
-static void GLIUInit(struct gliutable *gl){
+static void GLIUInit(struct gliutable *gl)
+{
- while (gl->desc_type != GL_END){
- switch(gl->desc_type){
- default:
+ while (gl->desc_type != GL_END) {
+ switch (gl->desc_type) {
+ default:
/* For Unknown types: Write then read MSR */
writeglmsr(gl);
- case SC_SHADOW: /* Check for a Shadow entry*/
+ case SC_SHADOW: /* Check for a Shadow entry */
ShadowInit(gl);
break;
-
- case R_SYSMEM: /* check for a SYSMEM entry*/
+
+ case R_SYSMEM: /* check for a SYSMEM entry */
SysmemInit(gl);
break;
-
- case BMO_SMM : /* check for a SMM entry*/
+
+ case BMO_SMM: /* check for a SMM entry */
SMMGL0Init(gl);
break;
-
- case BM_SMM : /* check for a SMM entry*/
- SMMGL1Init(gl);
+
+ case BM_SMM: /* check for a SMM entry */
+ SMMGL1Init(gl);
break;
}
gl++;
@@ -221,23 +225,24 @@
}
- /* ***************************************************************************/
- /* **/
- /* * GLPCIInit*/
- /* **/
- /* * Set up GLPCI settings for reads/write into memory*/
- /* * R0: 0-640KB,*/
- /* * R1: 1MB - Top of System Memory*/
- /* * R2: SMM Memory*/
- /* * R3: Framebuffer? - not set up yet*/
- /* * R4: ??*/
- /* **/
- /* * Entry:*/
- /* * Exit:*/
- /* * Modified:*/
- /* **/
- /* ***************************************************************************/
-static void GLPCIInit(void){
+ /* ************************************************************************** */
+ /* * */
+ /* * GLPCIInit */
+ /* * */
+ /* * Set up GLPCI settings for reads/write into memory */
+ /* * R0: 0-640KB, */
+ /* * R1: 1MB - Top of System Memory */
+ /* * R2: SMM Memory */
+ /* * R3: Framebuffer? - not set up yet */
+ /* * R4: ?? */
+ /* * */
+ /* * Entry: */
+ /* * Exit: */
+ /* * Modified: */
+ /* * */
+ /* ************************************************************************** */
+static void GLPCIInit(void)
+{
struct gliutable *gl = 0;
int i;
msr_t msr;
@@ -245,19 +250,21 @@
int nic_grants_control, enable_bus_parking;
/* */
- /* R0 - GLPCI settings for Conventional Memory space.*/
+ /* R0 - GLPCI settings for Conventional Memory space. */
/* */
- msr.hi = (0x09F000 >> 12) << GLPCI_RC_UPPER_TOP_SHIFT; /* 640 */
- msr.lo = 0; /* 0*/
- msr.lo |= GLPCI_RC_LOWER_EN_SET+ GLPCI_RC_LOWER_PF_SET + GLPCI_RC_LOWER_WC_SET;
+ msr.hi = (0x09F000 >> 12) << GLPCI_RC_UPPER_TOP_SHIFT; /* 640 */
+ msr.lo = 0; /* 0 */
+ msr.lo |=
+ GLPCI_RC_LOWER_EN_SET + GLPCI_RC_LOWER_PF_SET +
+ GLPCI_RC_LOWER_WC_SET;
msrnum = GLPCI_RC0;
wrmsr(msrnum, msr);
/* */
- /* R1 - GLPCI settings for SysMem space.*/
+ /* R1 - GLPCI settings for SysMem space. */
/* */
- /* Get systop from GLIU0 SYSTOP Descriptor*/
- for(i = 0; gliu0table[i].desc_name != GL_END; i++) {
+ /* Get systop from GLIU0 SYSTOP Descriptor */
+ for (i = 0; gliu0table[i].desc_name != GL_END; i++) {
if (gliu0table[i].desc_type == R_SYSMEM) {
gl = &gliu0table[i];
break;
@@ -268,8 +275,8 @@
msrnum = gl->desc_name;
msr = rdmsr(msrnum);
/* example R_SYSMEM value: 20:00:00:0f:fb:f0:01:00
- * translates to a base of 0x00100000 and top of 0xffbf0000
- * base of 1M and top of around 256M
+ * translates to a base of 0x00100000 and top of 0xffbf0000
+ * base of 1M and top of around 256M
*/
/* we have to create a page-aligned (4KB page) address for base and top */
/* So we need a high page aligned addresss (pah) and low page aligned address (pal)
@@ -280,28 +287,34 @@
pah <<= 12;
pal = msr.lo << 12;
- msr.hi = pah;
- msr.lo = pal;
- msr.lo |= GLPCI_RC_LOWER_EN_SET | GLPCI_RC_LOWER_PF_SET | GLPCI_RC_LOWER_WC_SET;
- printk_debug("GLPCI R1: system msr.lo 0x%08x msr.hi 0x%08x\n", msr.lo, msr.hi);
+ msr.hi = pah;
+ msr.lo = pal;
+ msr.lo |=
+ GLPCI_RC_LOWER_EN_SET | GLPCI_RC_LOWER_PF_SET |
+ GLPCI_RC_LOWER_WC_SET;
+ printk_debug("GLPCI R1: system msr.lo 0x%08x msr.hi 0x%08x\n",
+ msr.lo, msr.hi);
msrnum = GLPCI_RC1;
wrmsr(msrnum, msr);
}
/* */
- /* R2 - GLPCI settings for SMM space */
+ /* R2 - GLPCI settings for SMM space */
/* */
- msr.hi = ((SMM_OFFSET+(SMM_SIZE*1024-1)) >> 12) << GLPCI_RC_UPPER_TOP_SHIFT;
- msr.lo = (SMM_OFFSET >> 12) << GLPCI_RC_LOWER_BASE_SHIFT;
+ msr.hi =
+ ((SMM_OFFSET +
+ (SMM_SIZE * 1024 - 1)) >> 12) << GLPCI_RC_UPPER_TOP_SHIFT;
+ msr.lo = (SMM_OFFSET >> 12) << GLPCI_RC_LOWER_BASE_SHIFT;
msr.lo |= GLPCI_RC_LOWER_EN_SET | GLPCI_RC_LOWER_PF_SET;
- printk_debug("GLPCI R2: system msr.lo 0x%08x msr.hi 0x%08x\n", msr.lo, msr.hi);
+ printk_debug("GLPCI R2: system msr.lo 0x%08x msr.hi 0x%08x\n", msr.lo,
+ msr.hi);
msrnum = GLPCI_RC2;
wrmsr(msrnum, msr);
/* this is done elsewhere already, but it does no harm to do it more than once */
- /* write serialize memory hole to PCI. Need to to unWS when something is shadowed regardless of cachablility.*/
- msr.lo = 0x021212121; /* cache disabled and write serialized */
- msr.hi = 0x021212121; /* cache disabled and write serialized */
+ /* write serialize memory hole to PCI. Need to to unWS when something is shadowed regardless of cachablility. */
+ msr.lo = 0x021212121; /* cache disabled and write serialized */
+ msr.hi = 0x021212121; /* cache disabled and write serialized */
msrnum = CPU_RCONF_A0_BF;
wrmsr(msrnum, msr);
@@ -312,181 +325,186 @@
msrnum = CPU_RCONF_E0_FF;
wrmsr(msrnum, msr);
- /* Set Non-Cacheable Read Only for NorthBound Transactions to Memory. The Enable bit is handled in the Shadow setup.*/
+ /* Set Non-Cacheable Read Only for NorthBound Transactions to Memory. The Enable bit is handled in the Shadow setup. */
msrnum = GLPCI_A0_BF;
- msr.hi = 0x35353535;
- msr.lo = 0x35353535;
+ msr.hi = 0x35353535;
+ msr.lo = 0x35353535;
wrmsr(msrnum, msr);
msrnum = GLPCI_C0_DF;
- msr.hi = 0x35353535;
- msr.lo = 0x35353535;
+ msr.hi = 0x35353535;
+ msr.lo = 0x35353535;
wrmsr(msrnum, msr);
msrnum = GLPCI_E0_FF;
- msr.hi = 0x35353535;
- msr.lo = 0x35353535;
+ msr.hi = 0x35353535;
+ msr.lo = 0x35353535;
wrmsr(msrnum, msr);
- /* Set WSREQ*/
+ /* Set WSREQ */
msrnum = CPU_DM_CONFIG0;
msr = rdmsr(msrnum);
- msr.hi &= ~ (7 << DM_CONFIG0_UPPER_WSREQ_SHIFT);
+ msr.hi &= ~(7 << DM_CONFIG0_UPPER_WSREQ_SHIFT);
msr.hi |= 2 << DM_CONFIG0_UPPER_WSREQ_SHIFT; /* reduce to 1 for safe mode */
wrmsr(msrnum, msr);
/* we are ignoring the 5530 case for now, and perhaps forever. */
/* */
- /* 553x NB Init*/
- /* */
+ /* 553x NB Init */
+ /* */
/* Arbiter setup */
- enable_preempt = GLPCI_ARB_LOWER_PRE0_SET | GLPCI_ARB_LOWER_PRE1_SET | GLPCI_ARB_LOWER_PRE2_SET | GLPCI_ARB_LOWER_CPRE_SET;
+ enable_preempt =
+ GLPCI_ARB_LOWER_PRE0_SET | GLPCI_ARB_LOWER_PRE1_SET |
+ GLPCI_ARB_LOWER_PRE2_SET | GLPCI_ARB_LOWER_CPRE_SET;
enable_cpu_override = GLPCI_ARB_LOWER_COV_SET;
enable_bus_parking = GLPCI_ARB_LOWER_PARK_SET;
- nic_grants_control = (0x4 << GLPCI_ARB_UPPER_R2_SHIFT) | (0x3 << GLPCI_ARB_UPPER_H2_SHIFT );
+ nic_grants_control =
+ (0x4 << GLPCI_ARB_UPPER_R2_SHIFT) | (0x3 <<
+ GLPCI_ARB_UPPER_H2_SHIFT);
msrnum = GLPCI_ARB;
msr = rdmsr(msrnum);
- msr.hi |= nic_grants_control;
- msr.lo |= enable_cpu_override | enable_preempt | enable_bus_parking;
+ msr.hi |= nic_grants_control;
+ msr.lo |= enable_cpu_override | enable_preempt | enable_bus_parking;
wrmsr(msrnum, msr);
msrnum = GLPCI_CTRL;
msr = rdmsr(msrnum);
- msr.lo |= GLPCI_CTRL_LOWER_ME_SET | GLPCI_CTRL_LOWER_OWC_SET | GLPCI_CTRL_LOWER_PCD_SET; /* (Out will be disabled in CPUBUG649 for < 2.0 parts .)*/
- msr.lo |= GLPCI_CTRL_LOWER_LDE_SET;
+ msr.lo |= GLPCI_CTRL_LOWER_ME_SET | GLPCI_CTRL_LOWER_OWC_SET | GLPCI_CTRL_LOWER_PCD_SET; /* (Out will be disabled in CPUBUG649 for < 2.0 parts .) */
+ msr.lo |= GLPCI_CTRL_LOWER_LDE_SET;
- msr.lo &= ~ (0x03 << GLPCI_CTRL_LOWER_IRFC_SHIFT);
- msr.lo |= 0x02 << GLPCI_CTRL_LOWER_IRFC_SHIFT;
+ msr.lo &= ~(0x03 << GLPCI_CTRL_LOWER_IRFC_SHIFT);
+ msr.lo |= 0x02 << GLPCI_CTRL_LOWER_IRFC_SHIFT;
- msr.lo &= ~ (0x07 << GLPCI_CTRL_LOWER_IRFT_SHIFT);
- msr.lo |= 0x06 << GLPCI_CTRL_LOWER_IRFT_SHIFT;
-
- msr.hi &= ~ (0x0f << GLPCI_CTRL_UPPER_FTH_SHIFT);
- msr.hi |= 0x0F << GLPCI_CTRL_UPPER_FTH_SHIFT;
-
- msr.hi &= ~ (0x0f << GLPCI_CTRL_UPPER_RTH_SHIFT);
- msr.hi |= 0x0F << GLPCI_CTRL_UPPER_RTH_SHIFT;
-
- msr.hi &= ~ (0x0f << GLPCI_CTRL_UPPER_SBRTH_SHIFT);
- msr.hi |= 0x0F << GLPCI_CTRL_UPPER_SBRTH_SHIFT;
-
- msr.hi &= ~ (0x03 << GLPCI_CTRL_UPPER_WTO_SHIFT);
- msr.hi |= 0x06 << GLPCI_CTRL_UPPER_WTO_SHIFT;
-
- msr.hi &= ~ (0x03 << GLPCI_CTRL_UPPER_ILTO_SHIFT);
- msr.hi |= 0x00 << GLPCI_CTRL_UPPER_ILTO_SHIFT;
+ msr.lo &= ~(0x07 << GLPCI_CTRL_LOWER_IRFT_SHIFT);
+ msr.lo |= 0x06 << GLPCI_CTRL_LOWER_IRFT_SHIFT;
+
+ msr.hi &= ~(0x0f << GLPCI_CTRL_UPPER_FTH_SHIFT);
+ msr.hi |= 0x0F << GLPCI_CTRL_UPPER_FTH_SHIFT;
+
+ msr.hi &= ~(0x0f << GLPCI_CTRL_UPPER_RTH_SHIFT);
+ msr.hi |= 0x0F << GLPCI_CTRL_UPPER_RTH_SHIFT;
+
+ msr.hi &= ~(0x0f << GLPCI_CTRL_UPPER_SBRTH_SHIFT);
+ msr.hi |= 0x0F << GLPCI_CTRL_UPPER_SBRTH_SHIFT;
+
+ msr.hi &= ~(0x03 << GLPCI_CTRL_UPPER_WTO_SHIFT);
+ msr.hi |= 0x06 << GLPCI_CTRL_UPPER_WTO_SHIFT;
+
+ msr.hi &= ~(0x03 << GLPCI_CTRL_UPPER_ILTO_SHIFT);
+ msr.hi |= 0x00 << GLPCI_CTRL_UPPER_ILTO_SHIFT;
wrmsr(msrnum, msr);
-
/* Set GLPCI Latency Timer */
msrnum = GLPCI_CTRL;
msr = rdmsr(msrnum);
- msr.hi |= 0x1F << GLPCI_CTRL_UPPER_LAT_SHIFT; /* Change once 1.x is gone */
+ msr.hi |= 0x1F << GLPCI_CTRL_UPPER_LAT_SHIFT; /* Change once 1.x is gone */
wrmsr(msrnum, msr);
- /* GLPCI_SPARE*/
+ /* GLPCI_SPARE */
msrnum = GLPCI_SPARE;
msr = rdmsr(msrnum);
- msr.lo &= ~ 0x7;
- msr.lo |= GLPCI_SPARE_LOWER_AILTO_SET | GLPCI_SPARE_LOWER_PPD_SET | GLPCI_SPARE_LOWER_PPC_SET | GLPCI_SPARE_LOWER_MPC_SET | GLPCI_SPARE_LOWER_NSE_SET | GLPCI_SPARE_LOWER_SUPO_SET;
+ msr.lo &= ~0x7;
+ msr.lo |=
+ GLPCI_SPARE_LOWER_AILTO_SET | GLPCI_SPARE_LOWER_PPD_SET |
+ GLPCI_SPARE_LOWER_PPC_SET | GLPCI_SPARE_LOWER_MPC_SET |
+ GLPCI_SPARE_LOWER_NSE_SET | GLPCI_SPARE_LOWER_SUPO_SET;
wrmsr(msrnum, msr);
}
-
-
- /* ***************************************************************************/
- /* **/
- /* * ClockGatingInit*/
- /* **/
- /* * Enable Clock Gating.*/
- /* **/
- /* * Entry:*/
- /* * Exit:*/
- /* * Modified:*/
- /* **/
- /* ***************************************************************************/
-static void ClockGatingInit (void){
+ /* ************************************************************************** */
+ /* * */
+ /* * ClockGatingInit */
+ /* * */
+ /* * Enable Clock Gating. */
+ /* * */
+ /* * Entry: */
+ /* * Exit: */
+ /* * Modified: */
+ /* * */
+ /* ************************************************************************** */
+static void ClockGatingInit(void)
+{
msr_t msr;
struct msrinit *gating = ClockGatingDefault;
int i;
- for(i = 0; gating->msrnum != 0xffffffff; i++) {
+ for (i = 0; gating->msrnum != 0xffffffff; i++) {
msr = rdmsr(gating->msrnum);
msr.hi |= gating->msr.hi;
msr.lo |= gating->msr.lo;
- /* printk_debug("%s: MSR 0x%08x will be set to 0x%08x:0x%08x\n", __FUNCTION__,
- gating->msrnum, msr.hi, msr.lo); */ // GX3
+ /* printk_debug("%s: MSR 0x%08x will be set to 0x%08x:0x%08x\n", __FUNCTION__,
+ gating->msrnum, msr.hi, msr.lo); */// GX3
wrmsr(gating->msrnum, msr); // MSR - See the table above
- gating +=1;
+ gating += 1;
}
}
-static void GeodeLinkPriority(void){
+static void GeodeLinkPriority(void)
+{
msr_t msr;
struct msrinit *prio = GeodeLinkPriorityTable;
int i;
- for(i = 0; prio->msrnum != 0xffffffff; i++) {
+ for (i = 0; prio->msrnum != 0xffffffff; i++) {
msr = rdmsr(prio->msrnum);
msr.hi |= prio->msr.hi;
msr.lo &= ~0xfff;
msr.lo |= prio->msr.lo;
- /* printk_debug("%s: MSR 0x%08x will be set to 0x%08x:0x%08x\n", __FUNCTION__,
- prio->msrnum, msr.hi, msr.lo); */ // GX3
+ /* printk_debug("%s: MSR 0x%08x will be set to 0x%08x:0x%08x\n", __FUNCTION__,
+ prio->msrnum, msr.hi, msr.lo); */// GX3
wrmsr(prio->msrnum, msr); // MSR - See the table above
- prio +=1;
+ prio += 1;
}
}
-
-
/*
* Get the GLIU0 shadow register settings
* If the setShadow function is used then all shadow descriptors
* will stay sync'ed.
*/
-static uint64_t getShadow(void){
+static uint64_t getShadow(void)
+{
msr_t msr;
msr = rdmsr(MSR_GLIU0_SHADOW);
- return ( ( (uint64_t) msr.hi ) << 32 ) | msr.lo;
+ return (((uint64_t) msr.hi) << 32) | msr.lo;
}
-
/*
* Set the cache RConf registers for the memory hole.
* Keeps all cache shadow descriptors sync'ed.
* This is part of the PCI lockup solution
* Entry: EDX:EAX is the shadow settings
*/
-static void setShadowRCONF(uint32_t shadowHi, uint32_t shadowLo){
+static void setShadowRCONF(uint32_t shadowHi, uint32_t shadowLo)
+{
// ok this is whacky bit translation time.
int bit;
uint8_t shadowByte;
- msr_t msr = {0, 0};
+ msr_t msr = { 0, 0 };
shadowByte = (uint8_t) (shadowLo >> 16);
// load up D000 settings in edx.
for (bit = 8; (bit > 4); bit--) {
msr.hi <<= 8;
- msr.hi |= 1; // cache disable PCI/Shadow memory
+ msr.hi |= 1; // cache disable PCI/Shadow memory
if (shadowByte && (1 << bit))
- msr.hi |= 0x20; // write serialize PCI memory
+ msr.hi |= 0x20; // write serialize PCI memory
}
// load up C000 settings in eax.
- for ( ; bit; bit--) {
+ for (; bit; bit--) {
msr.lo <<= 8;
- msr.lo |= 1; // cache disable PCI/Shadow memory
+ msr.lo |= 1; // cache disable PCI/Shadow memory
if (shadowByte && (1 << bit))
- msr.lo |= 0x20; // write serialize PCI memory
+ msr.lo |= 0x20; // write serialize PCI memory
}
wrmsr(CPU_RCONF_C0_DF, msr);
@@ -496,23 +514,22 @@
// load up F000 settings in edx.
for (bit = 8; (bit > 4); bit--) {
msr.hi <<= 8;
- msr.hi |= 1; // cache disable PCI/Shadow memory
+ msr.hi |= 1; // cache disable PCI/Shadow memory
if (shadowByte && (1 << bit))
- msr.hi |= 0x20; // write serialize PCI memory
+ msr.hi |= 0x20; // write serialize PCI memory
}
// load up E000 settings in eax.
- for ( ; bit; bit--) {
+ for (; bit; bit--) {
msr.lo <<= 8;
- msr.lo |= 1; // cache disable PCI/Shadow memory
+ msr.lo |= 1; // cache disable PCI/Shadow memory
if (shadowByte && (1 << bit))
- msr.lo |= 0x20; // write serialize PCI memory
+ msr.lo |= 0x20; // write serialize PCI memory
}
wrmsr(CPU_RCONF_E0_FF, msr);
}
-
/*
* Set the GLPCI registers for the memory hole.
* Keeps all cache shadow descriptors sync'ed.
@@ -521,15 +538,14 @@
static void setShadowGLPCI(uint32_t shadowHi, uint32_t shadowLo)
{
msr_t msr;
-
+
// Set the Enable Register.
msr = rdmsr(GLPCI_REN);
msr.lo &= 0xFFFF00FF;
- msr.lo |= ( (shadowLo & 0xFFFF0000) >> 8);
+ msr.lo |= ((shadowLo & 0xFFFF0000) >> 8);
wrmsr(GLPCI_REN, msr);
}
-
/*
* Set the GLIU SC register settings. Scans descriptor tables for SC_SHADOW.
* Keeps all shadow descriptors sync'ed.
@@ -539,7 +555,7 @@
{
int i;
msr_t msr;
- struct gliutable* pTable;
+ struct gliutable *pTable;
uint32_t shadowLo, shadowHi;
shadowLo = (uint32_t) shadowSettings;
@@ -548,21 +564,25 @@
setShadowRCONF(shadowHi, shadowLo);
setShadowGLPCI(shadowHi, shadowLo);
- for(i = 0; gliutables[i]; i++) {
- for (pTable = gliutables[i]; pTable->desc_type != GL_END; pTable++) {
+ for (i = 0; gliutables[i]; i++) {
+ for (pTable = gliutables[i]; pTable->desc_type != GL_END;
+ pTable++) {
if (pTable->desc_type == SC_SHADOW) {
msr = rdmsr(pTable->desc_name);
msr.lo = (uint32_t) shadowSettings;
- msr.hi &= 0xFFFF0000; // maintain PDID in upper EDX
- msr.hi |= ((uint32_t) (shadowSettings >> 32)) & 0x0000FFFF;
+ msr.hi &= 0xFFFF0000; // maintain PDID in upper EDX
+ msr.hi |=
+ ((uint32_t) (shadowSettings >> 32)) &
+ 0x0000FFFF;
wrmsr(pTable->desc_name, msr); // MSR - See the table above
}
}
}
}
-static void rom_shadow_settings(void){
+static void rom_shadow_settings(void)
+{
uint64_t shadowSettings = getShadow();
shadowSettings &= (uint64_t) 0xFFFF00000000FFFFULL; // Disable read & writes
@@ -571,8 +591,6 @@
setShadow(shadowSettings);
}
-
-
/***************************************************************************
*
* L1Init
@@ -583,7 +601,7 @@
* ROMBASE(36:55) = 0FFFC0h ; Top of PCI/bottom of rom chipselect area
* DEVRC(35:28) = 39h ; cache disabled in PCI memory + WS bit on + Write Combine + write burst.
* SYSTOP(27:8) = top of system memory
- * SYSRC(7:0) = 00h ; writeback, can set to 08h to make writethrough
+ * SYSRC(7:0) = 00h ; writeback, can set to 08h to make writethrough
*
***************************************************************************/
#define SYSMEM_RCONF_WRITETHROUGH 8
@@ -599,27 +617,26 @@
uint8_t SysMemCacheProp;
/* Locate SYSMEM entry in GLIU0table */
- for(i = 0; gliu0table[i].desc_name != GL_END; i++) {
+ for (i = 0; gliu0table[i].desc_name != GL_END; i++) {
if (gliu0table[i].desc_type == R_SYSMEM) {
gl = &gliu0table[i];
break;
}
}
if (gl == 0) {
- post_code(0xCE); /* POST_RCONFInitError */
- while (1);
+ post_code(0xCE); /* POST_RCONFInitError */
+ while (1) ;
}
-
-// sysdescfound:
+// sysdescfound:
msr = rdmsr(gl->desc_name);
- /* 20 bit address - The bottom 12 bits go into bits 20-31 in eax, the
- * top 8 bits go into 0-7 of edx.
+ /* 20 bit address - The bottom 12 bits go into bits 20-31 in eax, the
+ * top 8 bits go into 0-7 of edx.
*/
msr.lo = (msr.lo & 0xFFFFFF00) | (msr.hi & 0xFF);
msr.lo = ((msr.lo << 12) | (msr.lo >> 20)) & 0x000FFFFF;
msr.lo <<= RCONF_DEFAULT_LOWER_SYSTOP_SHIFT; // 8
-
+
// Set Default SYSMEM region properties
msr.lo &= ~SYSMEM_RCONF_WRITETHROUGH; // NOT writethrough == writeback 8 (or ~8)
@@ -628,27 +645,32 @@
msr.lo |= (DEVRC_RCONF_DEFAULT << 28);
// Set the ROMBASE. This is usually FFFC0000h
- msr.hi |= (ROMBASE_RCONF_DEFAULT >> 12) << RCONF_DEFAULT_UPPER_ROMBASE_SHIFT;
+ msr.hi |=
+ (ROMBASE_RCONF_DEFAULT >> 12) << RCONF_DEFAULT_UPPER_ROMBASE_SHIFT;
// Set ROMBASE cache properties.
msr.hi |= ((ROMRC_RCONF_DEFAULT >> 8) | (ROMRC_RCONF_DEFAULT << 24));
-
+
// now program RCONF_DEFAULT
wrmsr(CPU_RCONF_DEFAULT, msr);
- printk_debug("CPU_RCONF_DEFAULT (1808): 0x%08X:0x%08X\n",msr.hi,msr.lo);
+ printk_debug("CPU_RCONF_DEFAULT (1808): 0x%08X:0x%08X\n", msr.hi,
+ msr.lo);
// RCONF_BYPASS: Cache tablewalk properties and SMM/DMM header access properties.
// Set to match system memory cache properties.
msr = rdmsr(CPU_RCONF_DEFAULT);
SysMemCacheProp = (uint8_t) (msr.lo & 0xFF);
msr = rdmsr(CPU_RCONF_BYPASS);
- msr.lo = (msr.lo & 0xFFFF0000) | (SysMemCacheProp << 8) | SysMemCacheProp;
+ msr.lo =
+ (msr.lo & 0xFFFF0000) | (SysMemCacheProp << 8) | SysMemCacheProp;
wrmsr(CPU_RCONF_BYPASS, msr);
-
- printk_debug("CPU_RCONF_BYPASS (180A): 0x%08x : 0x%08x\n", msr.hi, msr.lo);
+
+ printk_debug("CPU_RCONF_BYPASS (180A): 0x%08x : 0x%08x\n", msr.hi,
+ msr.lo);
}
-static void enable_L2_cache(void) {
+static void enable_L2_cache(void)
+{
msr_t msr;
/* Instruction Memory Configuration register
@@ -695,13 +717,14 @@
wbinvd();
}
-uint32_t get_systop(void) {
+uint32_t get_systop(void)
+{
struct gliutable *gl = 0;
uint32_t systop;
msr_t msr;
int i;
- for(i = 0; gliu0table[i].desc_name != GL_END; i++) {
+ for (i = 0; gliu0table[i].desc_name != GL_END; i++) {
if (gliu0table[i].desc_type == R_SYSMEM) {
gl = &gliu0table[i];
break;
@@ -710,9 +733,10 @@
if (gl) {
msr = rdmsr(gl->desc_name);
systop = ((msr.hi & 0xFF) << 24) | ((msr.lo & 0xFFF00000) >> 8);
- systop += 0x1000; /* 4K */
- }else{
- systop = ((sizeram() - CONFIG_VIDEO_MB) * 1024) - SMM_SIZE - 1024;
+ systop += 0x1000; /* 4K */
+ } else {
+ systop =
+ ((sizeram() - CONFIG_VIDEO_MB) * 1024) - SMM_SIZE - 1024;
}
return systop;
}
@@ -729,12 +753,12 @@
int i;
printk_debug("Enter %s\n", __FUNCTION__);
- for(i = 0; gliutables[i]; i++)
+ for (i = 0; gliutables[i]; i++)
GLIUInit(gliutables[i]);
- /* Now that the descriptor to memory is set up.*/
- /* The memory controller needs one read to synch its lines before it can be used.*/
- i = *(int *) 0;
+ /* Now that the descriptor to memory is set up. */
+ /* The memory controller needs one read to synch its lines before it can be used. */
+ i = *(int *)0;
GeodeLinkPriority();
@@ -749,4 +773,3 @@
__asm__ __volatile__("FINIT\n");
printk_debug("Exit %s\n", __FUNCTION__);
}
-
Modified: trunk/LinuxBIOSv2/src/northbridge/amd/lx/pll_reset.c
===================================================================
--- trunk/LinuxBIOSv2/src/northbridge/amd/lx/pll_reset.c 2007-05-10 18:00:24 UTC (rev 2648)
+++ trunk/LinuxBIOSv2/src/northbridge/amd/lx/pll_reset.c 2007-05-10 18:16:03 UTC (rev 2649)
@@ -22,43 +22,47 @@
{
msr_t msrGlcpSysRstpll;
- msrGlcpSysRstpll = rdmsr(GLCP_SYS_RSTPLL);
-
+ msrGlcpSysRstpll = rdmsr(GLCP_SYS_RSTPLL);
+
print_debug("_MSR GLCP_SYS_RSTPLL (");
- print_debug_hex32(GLCP_SYS_RSTPLL);
- print_debug(") value is: ");
- print_debug_hex32(msrGlcpSysRstpll.hi);
- print_debug(":");
- print_debug_hex32(msrGlcpSysRstpll.lo);
- print_debug("\r\n");
+ print_debug_hex32(GLCP_SYS_RSTPLL);
+ print_debug(") value is: ");
+ print_debug_hex32(msrGlcpSysRstpll.hi);
+ print_debug(":");
+ print_debug_hex32(msrGlcpSysRstpll.lo);
+ print_debug("\r\n");
POST_CODE(POST_PLL_INIT);
-
- if (!(msrGlcpSysRstpll.lo & (1 << RSTPLL_LOWER_SWFLAGS_SHIFT))){
+
+ if (!(msrGlcpSysRstpll.lo & (1 << RSTPLL_LOWER_SWFLAGS_SHIFT))) {
print_debug("Configuring PLL\n");
- if(manualconf){
+ if (manualconf) {
POST_CODE(POST_PLL_MANUAL);
/* CPU and GLIU mult/div (GLMC_CLK = GLIU_CLK / 2) */
- msrGlcpSysRstpll.hi = PLLMSRhi;
+ msrGlcpSysRstpll.hi = PLLMSRhi;
/* Hold Count - how long we will sit in reset */
- msrGlcpSysRstpll.lo = PLLMSRlo;
- }
- else{
- /*automatic configuration (straps)*/
+ msrGlcpSysRstpll.lo = PLLMSRlo;
+ } else {
+ /*automatic configuration (straps) */
POST_CODE(POST_PLL_STRAP);
- msrGlcpSysRstpll.lo &= ~(0xFF << RSTPPL_LOWER_HOLD_COUNT_SHIFT);
- msrGlcpSysRstpll.lo |= (0xDE << RSTPPL_LOWER_HOLD_COUNT_SHIFT);
- msrGlcpSysRstpll.lo &= ~(RSTPPL_LOWER_COREBYPASS_SET | RSTPPL_LOWER_MBBYPASS_SET);
- msrGlcpSysRstpll.lo |= RSTPPL_LOWER_COREPD_SET | RSTPPL_LOWER_CLPD_SET;
+ msrGlcpSysRstpll.lo &=
+ ~(0xFF << RSTPPL_LOWER_HOLD_COUNT_SHIFT);
+ msrGlcpSysRstpll.lo |=
+ (0xDE << RSTPPL_LOWER_HOLD_COUNT_SHIFT);
+ msrGlcpSysRstpll.lo &=
+ ~(RSTPPL_LOWER_COREBYPASS_SET |
+ RSTPPL_LOWER_MBBYPASS_SET);
+ msrGlcpSysRstpll.lo |=
+ RSTPPL_LOWER_COREPD_SET | RSTPPL_LOWER_CLPD_SET;
}
- /* Use SWFLAGS to remember: "we've already been here" */
+ /* Use SWFLAGS to remember: "we've already been here" */
msrGlcpSysRstpll.lo |= (1 << RSTPLL_LOWER_SWFLAGS_SHIFT);
- /* "reset the chip" value */
+ /* "reset the chip" value */
msrGlcpSysRstpll.lo |= RSTPPL_LOWER_CHIP_RESET_SET;
wrmsr(GLCP_SYS_RSTPLL, msrGlcpSysRstpll);
- /* You should never get here..... The chip has reset.*/
+ /* You should never get here..... The chip has reset. */
print_debug("CONFIGURING PLL FAILURE\n");
POST_CODE(POST_PLL_RESET_FAIL);
__asm__ __volatile__("hlt\n");
@@ -68,37 +72,38 @@
return;
}
-static unsigned int CPUSpeed(void){
+static unsigned int CPUSpeed(void)
+{
unsigned int speed;
msr_t msr;
msr = rdmsr(GLCP_SYS_RSTPLL);
- speed = ((((msr.hi >> RSTPLL_UPPER_CPUMULT_SHIFT) & 0x1F)+1)*333)/10;
- if((((((msr.hi >> RSTPLL_UPPER_CPUMULT_SHIFT) & 0x1F)+1)*333)%10) > 5){
+ speed = ((((msr.hi >> RSTPLL_UPPER_CPUMULT_SHIFT) & 0x1F) + 1) * 333) / 10;
+ if ((((((msr.hi >> RSTPLL_UPPER_CPUMULT_SHIFT) & 0x1F) + 1) * 333) % 10) > 5) {
++speed;
}
- return(speed);
+ return (speed);
}
-static unsigned int GeodeLinkSpeed(void){
+static unsigned int GeodeLinkSpeed(void)
+{
unsigned int speed;
msr_t msr;
msr = rdmsr(GLCP_SYS_RSTPLL);
- speed = ((((msr.hi >> RSTPLL_UPPER_GLMULT_SHIFT) & 0x1F)+1)*333)/10;
- if((((((msr.hi >> RSTPLL_UPPER_GLMULT_SHIFT) & 0x1F)+1)*333)%10) > 5){
+ speed = ((((msr.hi >> RSTPLL_UPPER_GLMULT_SHIFT) & 0x1F) + 1) * 333) / 10;
+ if ((((((msr.hi >> RSTPLL_UPPER_GLMULT_SHIFT) & 0x1F) + 1) * 333) % 10) > 5) {
++speed;
}
- return(speed);
+ return (speed);
}
-static unsigned int PCISpeed(void){
+static unsigned int PCISpeed(void)
+{
msr_t msr;
msr = rdmsr(GLCP_SYS_RSTPLL);
- if (msr.hi & (1 << RSTPPL_LOWER_PCISPEED_SHIFT)){
- return(66);
+ if (msr.hi & (1 << RSTPPL_LOWER_PCISPEED_SHIFT)) {
+ return (66);
+ } else {
+ return (33);
}
- else{
- return(33);
- }
}
-
Modified: trunk/LinuxBIOSv2/src/northbridge/amd/lx/raminit.c
===================================================================
--- trunk/LinuxBIOSv2/src/northbridge/amd/lx/raminit.c 2007-05-10 18:00:24 UTC (rev 2648)
+++ trunk/LinuxBIOSv2/src/northbridge/amd/lx/raminit.c 2007-05-10 18:16:03 UTC (rev 2649)
@@ -22,9 +22,13 @@
#include <spd.h>
#include "southbridge/amd/cs5536/cs5536.h"
-static const unsigned char NumColAddr[] = {0x00,0x10,0x11,0x00,0x00,0x00,0x00,0x07,0x08,0x09,0x0A,0x0B,0x0C,0x0D,0x0E,0x0F};
+static const unsigned char NumColAddr[] = {
+ 0x00, 0x10, 0x11, 0x00, 0x00, 0x00, 0x00, 0x07,
+ 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F
+};
-static void auto_size_dimm(unsigned int dimm){
+static void auto_size_dimm(unsigned int dimm)
+{
uint32_t dimm_setting;
uint16_t dimm_size;
uint8_t spd_byte;
@@ -33,60 +37,58 @@
dimm_setting = 0;
/* Check that we have a dimm */
- if (spd_read_byte(dimm, SPD_MEMORY_TYPE) == 0xFF){
+ if (spd_read_byte(dimm, SPD_MEMORY_TYPE) == 0xFF) {
return;
-}
+ }
/* Field: Module Banks per DIMM */
/* EEPROM byte usage: (5) Number of DIMM Banks */
spd_byte = spd_read_byte(dimm, SPD_NUM_DIMM_BANKS);
- if ((MIN_MOD_BANKS > spd_byte) && (spd_byte > MAX_MOD_BANKS)){
+ if ((MIN_MOD_BANKS > spd_byte) && (spd_byte > MAX_MOD_BANKS)) {
print_debug("Number of module banks not compatible\r\n");
POST_CODE(ERROR_BANK_SET);
__asm__ __volatile__("hlt\n");
}
dimm_setting |= (spd_byte >> 1) << CF07_UPPER_D0_MB_SHIFT;
-
/* Field: Banks per SDRAM device */
/* EEPROM byte usage: (17) Number of Banks on SDRAM Device */
spd_byte = spd_read_byte(dimm, SPD_NUM_BANKS_PER_SDRAM);
- if ((MIN_DEV_BANKS > spd_byte) && (spd_byte > MAX_DEV_BANKS)){
+ if ((MIN_DEV_BANKS > spd_byte) && (spd_byte > MAX_DEV_BANKS)) {
print_debug("Number of device banks not compatible\r\n");
POST_CODE(ERROR_BANK_SET);
__asm__ __volatile__("hlt\n");
}
dimm_setting |= (spd_byte >> 2) << CF07_UPPER_D0_CB_SHIFT;
-
/*; Field: DIMM size
- *; EEPROM byte usage: (3) Number or Row Addresses
- *; (4) Number of Column Addresses
- *; (5) Number of DIMM Banks
- *; (31) Module Bank Density
- *; Size = Module Density * Module Banks
+ *; EEPROM byte usage: (3) Number or Row Addresses
+ *; (4) Number of Column Addresses
+ *; (5) Number of DIMM Banks
+ *; (31) Module Bank Density
+ *; Size = Module Density * Module Banks
*/
- if ((spd_read_byte(dimm, SPD_NUM_ROWS) & 0xF0) || (spd_read_byte(dimm, SPD_NUM_COLUMNS) & 0xF0)){
+ if ((spd_read_byte(dimm, SPD_NUM_ROWS) & 0xF0)
+ || (spd_read_byte(dimm, SPD_NUM_COLUMNS) & 0xF0)) {
print_debug("Assymetirc DIMM not compatible\r\n");
POST_CODE(ERROR_UNSUPPORTED_DIMM);
__asm__ __volatile__("hlt\n");
}
dimm_size = spd_read_byte(dimm, SPD_BANK_DENSITY);
- dimm_size |= (dimm_size << 8); /* align so 1GB(bit0) is bit 8, this is a little weird to get gcc to not optimize this out*/
- dimm_size &= 0x01FC; /* and off 2GB DIMM size : not supported and the 1GB size we just moved up to bit 8 as well as all the extra on top*/
+ dimm_size |= (dimm_size << 8); /* align so 1GB(bit0) is bit 8, this is a little weird to get gcc to not optimize this out */
+ dimm_size &= 0x01FC; /* and off 2GB DIMM size : not supported and the 1GB size we just moved up to bit 8 as well as all the extra on top */
- /* Module Density * Module Banks */
- dimm_size <<= (dimm_setting >> CF07_UPPER_D0_MB_SHIFT) & 1; /* shift to multiply by # DIMM banks */
+ /* Module Density * Module Banks */
+ dimm_size <<= (dimm_setting >> CF07_UPPER_D0_MB_SHIFT) & 1; /* shift to multiply by # DIMM banks */
dimm_size = __builtin_ctz(dimm_size);
- if (dimm_size > 8){ /* 8 is 1GB only support 1GB per DIMM */
+ if (dimm_size > 8) { /* 8 is 1GB only support 1GB per DIMM */
print_debug("Only support up to 1 GB per DIMM\r\n");
POST_CODE(ERROR_DENSITY_DIMM);
__asm__ __volatile__("hlt\n");
}
dimm_setting |= dimm_size << CF07_UPPER_D0_SZ_SHIFT;
-
/*; Field: PAGE size
*; EEPROM byte usage: (4) Number of Column Addresses
*; PageSize = 2^# Column Addresses * Data width in bytes (should be 8bytes for a normal DIMM)
@@ -116,98 +118,98 @@
POST_CODE(ERROR_SET_PAGE);
__asm__ __volatile__("hlt\n");
}
- spd_byte -=7;
- if (spd_byte > 5){ /* if the value is above 6 it means >12 address lines */
- spd_byte = 7; /* which means >32k so set to disabled */
+ spd_byte -= 7;
+ if (spd_byte > 5) { /* if the value is above 6 it means >12 address lines */
+ spd_byte = 7; /* which means >32k so set to disabled */
}
- dimm_setting |= spd_byte << CF07_UPPER_D0_PSZ_SHIFT; /* 0=1k,1=2k,2=4k,etc */
+ dimm_setting |= spd_byte << CF07_UPPER_D0_PSZ_SHIFT; /* 0=1k,1=2k,2=4k,etc */
msr = rdmsr(MC_CF07_DATA);
- if (dimm == DIMM0){
+ if (dimm == DIMM0) {
msr.hi &= 0xFFFF0000;
msr.hi |= dimm_setting;
- }else{
+ } else {
msr.hi &= 0x0000FFFF;
msr.hi |= dimm_setting << 16;
}
wrmsr(MC_CF07_DATA, msr);
}
-
-static void checkDDRMax(void){
+static void checkDDRMax(void)
+{
uint8_t spd_byte0, spd_byte1;
uint16_t speed;
- /* PC133 identifier */
+ /* PC133 identifier */
spd_byte0 = spd_read_byte(DIMM0, SPD_MIN_CYCLE_TIME_AT_CAS_MAX);
- if (spd_byte0 == 0xFF){
- spd_byte0=0;
+ if (spd_byte0 == 0xFF) {
+ spd_byte0 = 0;
}
spd_byte1 = spd_read_byte(DIMM1, SPD_MIN_CYCLE_TIME_AT_CAS_MAX);
- if (spd_byte1 == 0xFF){
- spd_byte1=0;
+ if (spd_byte1 == 0xFF) {
+ spd_byte1 = 0;
}
/* I don't think you need this check.
- if (spd_byte0 < 0xA0 || spd_byte0 < 0xA0){
- print_debug("DIMM overclocked. Check GeodeLink Speed\r\n");
- POST_CODE(POST_PLL_MEM_FAIL);
- __asm__ __volatile__("hlt\n");
- }*/
+ if (spd_byte0 < 0xA0 || spd_byte0 < 0xA0){
+ print_debug("DIMM overclocked. Check GeodeLink Speed\r\n");
+ POST_CODE(POST_PLL_MEM_FAIL);
+ __asm__ __volatile__("hlt\n");
+ } */
-
/* Use the slowest DIMM */
- if (spd_byte0 < spd_byte1){
+ if (spd_byte0 < spd_byte1) {
spd_byte0 = spd_byte1;
}
/* Turn SPD ns time into MHZ. Check what the asm does to this math. */
- speed = 2*((10000/(((spd_byte0 >> 4) * 10) + (spd_byte0 & 0x0F))));
+ speed = 2 * ((10000 / (((spd_byte0 >> 4) * 10) + (spd_byte0 & 0x0F))));
/* current speed > max speed? */
- if (GeodeLinkSpeed() > speed){
+ if (GeodeLinkSpeed() > speed) {
print_debug("DIMM overclocked. Check GeodeLink Speed\r\n");
POST_CODE(POST_PLL_MEM_FAIL);
__asm__ __volatile__("hlt\n");
}
}
+const uint16_t REF_RATE[] = { 15, 3, 7, 31, 62, 125 }; /* ns */
-const uint16_t REF_RATE[] = {15, 3, 7, 31, 62, 125}; /* ns */
-
-static void set_refresh_rate(void){
+static void set_refresh_rate(void)
+{
uint8_t spd_byte0, spd_byte1;
uint16_t rate0, rate1;
msr_t msr;
spd_byte0 = spd_read_byte(DIMM0, SPD_REFRESH);
spd_byte0 &= 0xF;
- if (spd_byte0 > 5){
+ if (spd_byte0 > 5) {
spd_byte0 = 5;
}
rate0 = REF_RATE[spd_byte0];
spd_byte1 = spd_read_byte(DIMM1, SPD_REFRESH);
spd_byte1 &= 0xF;
- if (spd_byte1 > 5){
+ if (spd_byte1 > 5) {
spd_byte1 = 5;
}
rate1 = REF_RATE[spd_byte1];
/* Use the faster rate (lowest number) */
- if (rate0 > rate1){
+ if (rate0 > rate1) {
rate0 = rate1;
}
- msr = rdmsr(MC_CF07_DATA);
- msr.lo|= ((rate0 * (GeodeLinkSpeed()/2))/16) << CF07_LOWER_REF_INT_SHIFT;
- wrmsr(MC_CF07_DATA, msr);
- }
+ msr = rdmsr(MC_CF07_DATA);
+ msr.lo |= ((rate0 * (GeodeLinkSpeed() / 2)) / 16)
+ << CF07_LOWER_REF_INT_SHIFT;
+ wrmsr(MC_CF07_DATA, msr);
+}
+const uint8_t CASDDR[] = { 5, 5, 2, 6, 3, 7, 4, 0 }; /* 1(1.5), 1.5, 2, 2.5, 3, 3.5, 4, 0 */
-const uint8_t CASDDR[] = {5, 5, 2, 6, 3, 7, 4, 0}; /* 1(1.5), 1.5, 2, 2.5, 3, 3.5, 4, 0 */
-
-static void setCAS(void){
+static void setCAS(void)
+{
/*;*****************************************************************************
;*
;* setCAS
@@ -236,226 +238,220 @@
/************************** DIMM0 **********************************/
casmap0 = spd_read_byte(DIMM0, SPD_ACCEPTABLE_CAS_LATENCIES);
- if (casmap0 != 0xFF){
+ if (casmap0 != 0xFF) {
/* IF -.5 timing is supported, check -.5 timing > GeodeLink */
spd_byte = spd_read_byte(DIMM0, SPD_SDRAM_CYCLE_TIME_2ND);
- if(spd_byte != 0){
+ if (spd_byte != 0) {
/* Turn SPD ns time into MHZ. Check what the asm does to this math. */
- dimm_speed = 2*(10000/(((spd_byte >> 4) * 10) + (spd_byte & 0x0F)));
- if (dimm_speed >= glspeed){
+ dimm_speed = 2 * (10000 / (((spd_byte >> 4) * 10) +
+ (spd_byte & 0x0F)));
+ if (dimm_speed >= glspeed) {
/* IF -1 timing is supported, check -1 timing > GeodeLink */
spd_byte = spd_read_byte(DIMM0, SPD_SDRAM_CYCLE_TIME_3RD);
- if(spd_byte != 0){
+ if (spd_byte != 0) {
/* Turn SPD ns time into MHZ. Check what the asm does to this math. */
- dimm_speed = 2*(10000/(((spd_byte >> 4) * 10) + (spd_byte & 0x0F)));
- if (dimm_speed <= glspeed){
+ dimm_speed = 2 * (10000 / (((spd_byte >> 4) * 10) + (spd_byte & 0x0F)));
+ if (dimm_speed <= glspeed) {
/* set we can use -.5 timing but not -1 */
- spd_byte = 31 - __builtin_clz((uint32_t)casmap0); /* just want bits in the lower byte since we have to cast to a 32 */
+ spd_byte = 31 - __builtin_clz((uint32_t) casmap0);
+ /* just want bits in the lower byte since we have to cast to a 32 */
casmap0 &= 0xFF << (--spd_byte);
}
- } /*MIN_CYCLE_10 !=0 */
- }
- else{ /* Timing_05 < GLspeed, can't use -.5 or -1 timing */
- spd_byte = 31 - __builtin_clz((uint32_t)casmap0); /* just want bits in the lower byte since we have to cast to a 32 */
+ } /*MIN_CYCLE_10 !=0 */
+ } else {
+ /* Timing_05 < GLspeed, can't use -.5 or -1 timing */
+ spd_byte = 31 - __builtin_clz((uint32_t) casmap0);
+ /* just want bits in the lower byte since we have to cast to a 32 */
casmap0 &= 0xFF << (spd_byte);
}
- } /*MIN_CYCLE_05 !=0 */
+ } /*MIN_CYCLE_05 !=0 */
+ } else { /* No DIMM */
+ casmap0 = 0;
}
- else{ /* No DIMM */
- casmap0=0;
- }
/************************** DIMM1 **********************************/
casmap1 = spd_read_byte(DIMM1, SPD_ACCEPTABLE_CAS_LATENCIES);
- if (casmap1 != 0xFF){
+ if (casmap1 != 0xFF) {
/* IF -.5 timing is supported, check -.5 timing > GeodeLink */
spd_byte = spd_read_byte(DIMM1, SPD_SDRAM_CYCLE_TIME_2ND);
- if(spd_byte != 0){
+ if (spd_byte != 0) {
/* Turn SPD ns time into MHZ. Check what the asm does to this math. */
- dimm_speed = 2*(10000/(((spd_byte >> 4) * 10) + (spd_byte & 0x0F)));
- if (dimm_speed >= glspeed){
+ dimm_speed = 2 * (10000 / (((spd_byte >> 4) * 10) + (spd_byte & 0x0F)));
+ if (dimm_speed >= glspeed) {
/* IF -1 timing is supported, check -1 timing > GeodeLink */
spd_byte = spd_read_byte(DIMM1, SPD_SDRAM_CYCLE_TIME_3RD);
- if(spd_byte != 0){
+ if (spd_byte != 0) {
/* Turn SPD ns time into MHZ. Check what the asm does to this math. */
- dimm_speed = 2*(10000/(((spd_byte >> 4) * 10) + (spd_byte & 0x0F)));
- if (dimm_speed <= glspeed){
+ dimm_speed = 2 * (10000 / (((spd_byte >> 4) * 10) + (spd_byte & 0x0F)));
+ if (dimm_speed <= glspeed) {
/* set we can use -.5 timing but not -1 */
- spd_byte =31 - __builtin_clz((uint32_t)casmap1); /* just want bits in the lower byte since we have to cast to a 32 */
+ spd_byte = 31 - __builtin_clz((uint32_t) casmap1);
+ /* just want bits in the lower byte since we have to cast to a 32 */
casmap1 &= 0xFF << (--spd_byte);
}
- } /*MIN_CYCLE_10 !=0 */
- }
- else{ /* Timing_05 < GLspeed, can't use -.5 or -1 timing */
- spd_byte = 31 - __builtin_clz((uint32_t)casmap1); /* just want bits in the lower byte since we have to cast to a 32 */
+ } /*MIN_CYCLE_10 !=0 */
+ } else {
+ /* Timing_05 < GLspeed, can't use -.5 or -1 timing */
+ spd_byte = 31 - __builtin_clz((uint32_t) casmap1);
+ /* just want bits in the lower byte since we have to cast to a 32 */
casmap1 &= 0xFF << (spd_byte);
}
- } /*MIN_CYCLE_05 !=0 */
+ } /*MIN_CYCLE_05 !=0 */
+ } else { /* No DIMM */
+ casmap1 = 0;
}
- else{ /* No DIMM */
- casmap1=0;
- }
/********************* CAS_LAT MAP COMPARE ***************************/
- if (casmap0 == 0){
- spd_byte = CASDDR[__builtin_ctz((uint32_t)casmap1)];
- }
- else if (casmap1 == 0){
- spd_byte = CASDDR[__builtin_ctz((uint32_t)casmap0)];
- }
- else if ((casmap0 &= casmap1)){
- spd_byte = CASDDR[__builtin_ctz((uint32_t)casmap0)];
- }
- else{
+ if (casmap0 == 0) {
+ spd_byte = CASDDR[__builtin_ctz((uint32_t) casmap1)];
+ } else if (casmap1 == 0) {
+ spd_byte = CASDDR[__builtin_ctz((uint32_t) casmap0)];
+ } else if ((casmap0 &= casmap1)) {
+ spd_byte = CASDDR[__builtin_ctz((uint32_t) casmap0)];
+ } else {
print_debug("DIMM CAS Latencies not compatible\r\n");
POST_CODE(ERROR_DIFF_DIMMS);
__asm__ __volatile__("hlt\n");
}
-
msr = rdmsr(MC_CF8F_DATA);
msr.lo &= ~(7 << CF8F_LOWER_CAS_LAT_SHIFT);
msr.lo |= spd_byte << CF8F_LOWER_CAS_LAT_SHIFT;
wrmsr(MC_CF8F_DATA, msr);
}
-
-static void set_latencies(void){
+static void set_latencies(void)
+{
uint32_t memspeed, dimm_setting;
uint8_t spd_byte0, spd_byte1;
msr_t msr;
- memspeed = GeodeLinkSpeed()/2;
- dimm_setting=0;
+ memspeed = GeodeLinkSpeed() / 2;
+ dimm_setting = 0;
/* MC_CF8F setup */
/* tRAS */
spd_byte0 = spd_read_byte(DIMM0, SPD_tRAS);
- if (spd_byte0 == 0xFF){
- spd_byte0=0;
+ if (spd_byte0 == 0xFF) {
+ spd_byte0 = 0;
}
spd_byte1 = spd_read_byte(DIMM1, SPD_tRAS);
- if (spd_byte1 == 0xFF){
- spd_byte1=0;
+ if (spd_byte1 == 0xFF) {
+ spd_byte1 = 0;
}
- if (spd_byte0 < spd_byte1){
+ if (spd_byte0 < spd_byte1) {
spd_byte0 = spd_byte1;
}
/* (ns/(1/MHz) = (us*MHZ)/1000 = clocks/1000 = clocks) */
- spd_byte1 = (spd_byte0 * memspeed)/1000;
- if(((spd_byte0 * memspeed)%1000)){
+ spd_byte1 = (spd_byte0 * memspeed) / 1000;
+ if (((spd_byte0 * memspeed) % 1000)) {
++spd_byte1;
}
dimm_setting |= spd_byte1 << CF8F_LOWER_ACT2PRE_SHIFT;
-
/* tRP */
spd_byte0 = spd_read_byte(DIMM0, SPD_tRP);
- if (spd_byte0 == 0xFF){
- spd_byte0=0;
+ if (spd_byte0 == 0xFF) {
+ spd_byte0 = 0;
}
spd_byte1 = spd_read_byte(DIMM1, SPD_tRP);
- if (spd_byte1 == 0xFF){
- spd_byte1=0;
+ if (spd_byte1 == 0xFF) {
+ spd_byte1 = 0;
}
- if (spd_byte0 < spd_byte1){
+ if (spd_byte0 < spd_byte1) {
spd_byte0 = spd_byte1;
}
/* (ns/(1/MHz) = (us*MHZ)/1000 = clocks/1000 = clocks) */
- spd_byte1 = ((spd_byte0 >> 2) * memspeed)/1000;
- if((((spd_byte0 >> 2) * memspeed)%1000)){
+ spd_byte1 = ((spd_byte0 >> 2) * memspeed) / 1000;
+ if ((((spd_byte0 >> 2) * memspeed) % 1000)) {
++spd_byte1;
}
dimm_setting |= spd_byte1 << CF8F_LOWER_PRE2ACT_SHIFT;
-
/* tRCD */
spd_byte0 = spd_read_byte(DIMM0, SPD_tRCD);
- if (spd_byte0 == 0xFF){
- spd_byte0=0;
+ if (spd_byte0 == 0xFF) {
+ spd_byte0 = 0;
}
spd_byte1 = spd_read_byte(DIMM1, SPD_tRCD);
- if (spd_byte1 == 0xFF){
- spd_byte1=0;
+ if (spd_byte1 == 0xFF) {
+ spd_byte1 = 0;
}
- if (spd_byte0 < spd_byte1){
+ if (spd_byte0 < spd_byte1) {
spd_byte0 = spd_byte1;
}
/* (ns/(1/MHz) = (us*MHZ)/1000 = clocks/1000 = clocks) */
- spd_byte1 = ((spd_byte0 >> 2) * memspeed)/1000;
- if((((spd_byte0 >> 2) * memspeed)%1000)){
+ spd_byte1 = ((spd_byte0 >> 2) * memspeed) / 1000;
+ if ((((spd_byte0 >> 2) * memspeed) % 1000)) {
++spd_byte1;
}
dimm_setting |= spd_byte1 << CF8F_LOWER_ACT2CMD_SHIFT;
-
/* tRRD */
spd_byte0 = spd_read_byte(DIMM0, SPD_tRRD);
- if (spd_byte0 == 0xFF){
- spd_byte0=0;
+ if (spd_byte0 == 0xFF) {
+ spd_byte0 = 0;
}
spd_byte1 = spd_read_byte(DIMM1, SPD_tRRD);
- if (spd_byte1 == 0xFF){
- spd_byte1=0;
+ if (spd_byte1 == 0xFF) {
+ spd_byte1 = 0;
}
- if (spd_byte0 < spd_byte1){
+ if (spd_byte0 < spd_byte1) {
spd_byte0 = spd_byte1;
}
/* (ns/(1/MHz) = (us*MHZ)/1000 = clocks/1000 = clocks) */
- spd_byte1 = ((spd_byte0 >> 2) * memspeed)/1000;
- if((((spd_byte0 >> 2) * memspeed)%1000)){
+ spd_byte1 = ((spd_byte0 >> 2) * memspeed) / 1000;
+ if ((((spd_byte0 >> 2) * memspeed) % 1000)) {
++spd_byte1;
}
dimm_setting |= spd_byte1 << CF8F_LOWER_ACT2ACT_SHIFT;
-
/* tRC = tRP + tRAS */
- dimm_setting |= (((dimm_setting >> CF8F_LOWER_ACT2PRE_SHIFT) & 0x0F) + ((dimm_setting >> CF8F_LOWER_PRE2ACT_SHIFT) & 0x07)) \
- << CF8F_LOWER_ACT2ACTREF_SHIFT;
+ dimm_setting |= (((dimm_setting >> CF8F_LOWER_ACT2PRE_SHIFT) & 0x0F) +
+ ((dimm_setting >> CF8F_LOWER_PRE2ACT_SHIFT) & 0x07))
+ << CF8F_LOWER_ACT2ACTREF_SHIFT;
-
msr = rdmsr(MC_CF8F_DATA);
msr.lo &= 0xF00000FF;
msr.lo |= dimm_setting;
- msr.hi |= CF8F_UPPER_REORDER_DIS_SET;
+ msr.hi |= CF8F_UPPER_REORDER_DIS_SET;
wrmsr(MC_CF8F_DATA, msr);
/* MC_CF1017 setup */
/* tRFC */
spd_byte0 = spd_read_byte(DIMM0, SPD_tRFC);
- if (spd_byte0 == 0xFF){
- spd_byte0=0;
+ if (spd_byte0 == 0xFF) {
+ spd_byte0 = 0;
}
spd_byte1 = spd_read_byte(DIMM1, SPD_tRFC);
- if (spd_byte1 == 0xFF){
- spd_byte1=0;
+ if (spd_byte1 == 0xFF) {
+ spd_byte1 = 0;
}
- if (spd_byte0 < spd_byte1){
+ if (spd_byte0 < spd_byte1) {
spd_byte0 = spd_byte1;
}
- if (spd_byte0){
+ if (spd_byte0) {
/* (ns/(1/MHz) = (us*MHZ)/1000 = clocks/1000 = clocks) */
- spd_byte1 = (spd_byte0 * memspeed)/1000;
- if(((spd_byte0 * memspeed)%1000)){
+ spd_byte1 = (spd_byte0 * memspeed) / 1000;
+ if (((spd_byte0 * memspeed) % 1000)) {
++spd_byte1;
}
- }
- else{ /* Not all SPDs have tRFC setting. Use this formula tRFC = tRC + 1 clk */
+ } else { /* Not all SPDs have tRFC setting. Use this formula tRFC = tRC + 1 clk */
spd_byte1 = ((dimm_setting >> CF8F_LOWER_ACT2ACTREF_SHIFT) & 0x0F) + 1;
}
- dimm_setting = spd_byte1 << CF1017_LOWER_REF2ACT_SHIFT; /* note this clears the cf8f dimm setting */
+ dimm_setting = spd_byte1 << CF1017_LOWER_REF2ACT_SHIFT; /* note this clears the cf8f dimm setting */
msr = rdmsr(MC_CF1017_DATA);
msr.lo &= ~(0x1F << CF1017_LOWER_REF2ACT_SHIFT);
msr.lo |= dimm_setting;
wrmsr(MC_CF1017_DATA, msr);
/* tWTR: Set tWTR to 2 for 400MHz and above GLBUS (200Mhz mem) other wise it stay default(1) */
- if (memspeed > 198){
+ if (memspeed > 198) {
msr = rdmsr(MC_CF1017_DATA);
msr.lo &= ~(0x7 << CF1017_LOWER_WR_TO_RD_SHIFT);
msr.lo |= 2 << CF1017_LOWER_WR_TO_RD_SHIFT;
@@ -463,41 +459,45 @@
}
}
-static void set_extended_mode_registers(void){
+static void set_extended_mode_registers(void)
+{
uint8_t spd_byte0, spd_byte1;
msr_t msr;
spd_byte0 = spd_read_byte(DIMM0, SPD_DEVICE_ATTRIBUTES_GENERAL);
- if (spd_byte0 == 0xFF){
- spd_byte0=0;
+ if (spd_byte0 == 0xFF) {
+ spd_byte0 = 0;
}
spd_byte1 = spd_read_byte(DIMM1, SPD_DEVICE_ATTRIBUTES_GENERAL);
- if (spd_byte1 == 0xFF){
- spd_byte1=0;
+ if (spd_byte1 == 0xFF) {
+ spd_byte1 = 0;
}
spd_byte1 &= spd_byte0;
msr = rdmsr(MC_CF07_DATA);
- if (spd_byte1 & 1){ /* Drive Strength Control */
+ if (spd_byte1 & 1) { /* Drive Strength Control */
msr.lo |= CF07_LOWER_EMR_DRV_SET;
}
- if (spd_byte1 & 2){ /* FET Control */
+ if (spd_byte1 & 2) { /* FET Control */
msr.lo |= CF07_LOWER_EMR_QFC_SET;
}
wrmsr(MC_CF07_DATA, msr);
}
-static void EnableMTest (void){
+static void EnableMTest(void)
+{
msr_t msr;
msr = rdmsr(GLCP_DELAY_CONTROLS);
- msr.hi &= ~(7 << 20); /* clear bits 54:52 */
- if (GeodeLinkSpeed() < 200){
+ msr.hi &= ~(7 << 20); /* clear bits 54:52 */
+ if (GeodeLinkSpeed() < 200) {
msr.hi |= 2 << 20;
}
wrmsr(GLCP_DELAY_CONTROLS, msr);
msr = rdmsr(MC_CFCLK_DBUG);
- msr.hi |= CFCLK_UPPER_MTST_B2B_DIS_SET | CFCLK_UPPER_MTEST_EN_SET | CFCLK_UPPER_MTST_RBEX_EN_SET;
+ msr.hi |=
+ CFCLK_UPPER_MTST_B2B_DIS_SET | CFCLK_UPPER_MTEST_EN_SET |
+ CFCLK_UPPER_MTST_RBEX_EN_SET;
msr.lo |= CFCLK_LOWER_TRISTATE_DIS_SET;
wrmsr(MC_CFCLK_DBUG, msr);
@@ -513,10 +513,9 @@
msrnum = MC_CF1017_DATA;
msr = rdmsr(msrnum);
msr.lo &= ~(7 << CF1017_LOWER_RD_TMG_CTL_SHIFT);
- if (GeodeLinkSpeed() < 334){
+ if (GeodeLinkSpeed() < 334) {
msr.lo |= (3 << CF1017_LOWER_RD_TMG_CTL_SHIFT);
- }
- else{
+ } else {
msr.lo |= (4 << CF1017_LOWER_RD_TMG_CTL_SHIFT);
}
wrmsr(msrnum, msr);
@@ -525,50 +524,49 @@
msrnum = MC_CF07_DATA;
msr = rdmsr(msrnum);
msr.lo &= ~0xF0;
- msr.lo |= 0x40; /* set refresh to 4SDRAM clocks */
+ msr.lo |= 0x40; /* set refresh to 4SDRAM clocks */
wrmsr(msrnum, msr);
/* Memory Interleave: Set HOI here otherwise default is LOI */
/* msrnum = MC_CF8F_DATA;
- msr = rdmsr(msrnum);
- msr.hi |= CF8F_UPPER_HOI_LOI_SET;
- wrmsr(msrnum, msr); */
+ msr = rdmsr(msrnum);
+ msr.hi |= CF8F_UPPER_HOI_LOI_SET;
+ wrmsr(msrnum, msr); */
}
-
static void sdram_set_spd_registers(const struct mem_controller *ctrl)
{
uint8_t spd_byte;
- POST_CODE(POST_MEM_SETUP); // post_70h
+ POST_CODE(POST_MEM_SETUP); // post_70h
spd_byte = spd_read_byte(DIMM0, SPD_MODULE_ATTRIBUTES);
/* Check DIMM is not Register and not Buffered DIMMs. */
- if ((spd_byte != 0xFF) && (spd_byte & 3) ){
+ if ((spd_byte != 0xFF) && (spd_byte & 3)) {
print_debug("DIMM0 NOT COMPATIBLE\r\n");
POST_CODE(ERROR_UNSUPPORTED_DIMM);
__asm__ __volatile__("hlt\n");
}
spd_byte = spd_read_byte(DIMM1, SPD_MODULE_ATTRIBUTES);
- if ((spd_byte != 0xFF) && (spd_byte & 3)){
+ if ((spd_byte != 0xFF) && (spd_byte & 3)) {
print_debug("DIMM1 NOT COMPATIBLE\r\n");
POST_CODE(ERROR_UNSUPPORTED_DIMM);
__asm__ __volatile__("hlt\n");
}
- POST_CODE(POST_MEM_SETUP2); // post_72h
+ POST_CODE(POST_MEM_SETUP2); // post_72h
/* Check that the memory is not overclocked. */
checkDDRMax();
/* Size the DIMMS */
- POST_CODE(POST_MEM_SETUP3); // post_73h
+ POST_CODE(POST_MEM_SETUP3); // post_73h
auto_size_dimm(DIMM0);
- POST_CODE(POST_MEM_SETUP4); // post_74h
+ POST_CODE(POST_MEM_SETUP4); // post_74h
auto_size_dimm(DIMM1);
/* Set CAS latency */
- POST_CODE(POST_MEM_SETUP5); // post_75h
+ POST_CODE(POST_MEM_SETUP5); // post_75h
setCAS();
/* Set all the other latencies here (tRAS, tRP....) */
@@ -601,73 +599,66 @@
;* 9) MRS w/ memory config & reset DLL clear
;* 8) DDR SDRAM ready for normal operation
;********************************************************************/
- POST_CODE(POST_MEM_ENABLE); // post_76h
+ POST_CODE(POST_MEM_ENABLE); // post_76h
/* Only enable MTest for TLA memory debug */
- /*EnableMTest();*/
+ /*EnableMTest(); */
/* If both Page Size = "Not Installed" we have a problems and should halt. */
msr = rdmsr(MC_CF07_DATA);
- if ((msr.hi & ((7 << CF07_UPPER_D1_PSZ_SHIFT) | (7 << CF07_UPPER_D0_PSZ_SHIFT))) \
- == ((7 << CF07_UPPER_D1_PSZ_SHIFT) | (7 << CF07_UPPER_D0_PSZ_SHIFT))){
+ if ((msr.hi & ((7 << CF07_UPPER_D1_PSZ_SHIFT) | (7 << CF07_UPPER_D0_PSZ_SHIFT))) ==
+ ((7 << CF07_UPPER_D1_PSZ_SHIFT) | (7 << CF07_UPPER_D0_PSZ_SHIFT))) {
print_debug("No memory in the system\r\n");
POST_CODE(ERROR_NO_DIMMS);
__asm__ __volatile__("hlt\n");
}
- /* Set CKEs */
+ /* Set CKEs */
msrnum = MC_CFCLK_DBUG;
msr = rdmsr(msrnum);
msr.lo &= ~(CFCLK_LOWER_MASK_CKE_SET0 | CFCLK_LOWER_MASK_CKE_SET1);
wrmsr(msrnum, msr);
-
/* Force Precharge All on next command, EMRS */
msrnum = MC_CFCLK_DBUG;
msr = rdmsr(msrnum);
msr.lo |= CFCLK_LOWER_FORCE_PRE_SET;
- wrmsr(msrnum,msr);
+ wrmsr(msrnum, msr);
-
/* EMRS to enable DLL (pre-setup done in setExtendedModeRegisters) */
- msrnum = MC_CF07_DATA;
+ msrnum = MC_CF07_DATA;
msr = rdmsr(msrnum);
msr.lo |= CF07_LOWER_PROG_DRAM_SET | CF07_LOWER_LOAD_MODE_DDR_SET;
wrmsr(msrnum, msr);
msr.lo &= ~(CF07_LOWER_PROG_DRAM_SET | CF07_LOWER_LOAD_MODE_DDR_SET);
wrmsr(msrnum, msr);
-
/* Clear Force Precharge All */
msrnum = MC_CFCLK_DBUG;
msr = rdmsr(msrnum);
msr.lo &= ~CFCLK_LOWER_FORCE_PRE_SET;
wrmsr(msrnum, msr);
-
/* MRS Reset DLL - set */
msrnum = MC_CF07_DATA;
msr = rdmsr(msrnum);
msr.lo |= CF07_LOWER_PROG_DRAM_SET | CF07_LOWER_LOAD_MODE_DLL_RESET;
- wrmsr(msrnum,msr);
+ wrmsr(msrnum, msr);
msr.lo &= ~(CF07_LOWER_PROG_DRAM_SET | CF07_LOWER_LOAD_MODE_DLL_RESET);
wrmsr(msrnum, msr);
-
/* 2us delay (200 clocks @ 200Mhz). We probably really don't need this but.... better safe. */
/* Wait 2 PORT61 ticks. between 15us and 30us */
/* This would be endless if the timer is stuck. */
- while ((inb(0x61))); /* find the first edge */
- while (!(~inb(0x61)));
+ while ((inb(0x61))) ; /* find the first edge */
+ while (!(~inb(0x61))) ;
-
/* Force Precharge All on the next command, auto-refresh */
msrnum = MC_CFCLK_DBUG;
msr = rdmsr(msrnum);
msr.lo |= CFCLK_LOWER_FORCE_PRE_SET;
wrmsr(msrnum, msr);
-
/* Manually AUTO refresh #1 */
/* If auto refresh was not enabled above we would need to do 8 refreshes to prime the pump before these 2. */
msrnum = MC_CF07_DATA;
@@ -683,7 +674,6 @@
msr.lo &= ~CFCLK_LOWER_FORCE_PRE_SET;
wrmsr(msrnum, msr);
-
/* Manually AUTO refresh */
/* The MC should insert the right delay between the refreshes */
msrnum = MC_CF07_DATA;
@@ -693,7 +683,6 @@
msr.lo &= ~CF07_LOWER_REF_TEST_SET;
wrmsr(msrnum, msr);
-
/* MRS Reset DLL - clear */
msrnum = MC_CF07_DATA;
msr = rdmsr(msrnum);
@@ -702,17 +691,16 @@
msr.lo &= ~CF07_LOWER_PROG_DRAM_SET;
wrmsr(msrnum, msr);
-
/* Allow MC to tristate during idle cycles with MTEST OFF */
msrnum = MC_CFCLK_DBUG;
msr = rdmsr(msrnum);
msr.lo &= ~CFCLK_LOWER_TRISTATE_DIS_SET;
wrmsr(msrnum, msr);
-
/* Disable SDCLK DIMM1 slot if no DIMM installed to save power. */
msr = rdmsr(MC_CF07_DATA);
- if ((msr.hi & (7 << CF07_UPPER_D1_PSZ_SHIFT)) == (7 << CF07_UPPER_D1_PSZ_SHIFT)){
+ if ((msr.hi & (7 << CF07_UPPER_D1_PSZ_SHIFT)) ==
+ (7 << CF07_UPPER_D1_PSZ_SHIFT)) {
msrnum = GLCP_DELAY_CONTROLS;
msr = rdmsr(msrnum);
msr.hi |= (1 << 23); /* SDCLK bit for 2.0 */
@@ -720,11 +708,10 @@
}
/* Set PMode0 Sensitivity Counter */
- msr.lo = 0; /* pmode 0=0 most aggressive */
+ msr.lo = 0; /* pmode 0=0 most aggressive */
msr.hi = 0x200; /* pmode 1=200h */
wrmsr(MC_CF_PMCTR, msr);
-
/* Set PMode1 Up delay enable */
msrnum = MC_CF1017_DATA;
msr = rdmsr(msrnum);
@@ -732,15 +719,15 @@
wrmsr(msrnum, msr);
print_debug("DRAM controller init done.\r\n");
- POST_CODE(POST_MEM_SETUP_GOOD); //0x7E
+ POST_CODE(POST_MEM_SETUP_GOOD); //0x7E
/* make sure there is nothing stale in the cache */
- /* CAR stack is in the cache __asm__ __volatile__("wbinvd\n");*/
+ /* CAR stack is in the cache __asm__ __volatile__("wbinvd\n"); */
/* The RAM dll needs a write to lock on so generate a few dummy writes */
/* Note: The descriptor needs to be enabled to point at memory */
volatile unsigned long *ptr;
- for (i=0;i<5;i++) {
+ for (i = 0; i < 5; i++) {
ptr = (void *)i;
*ptr = (unsigned long)i;
}
@@ -751,19 +738,18 @@
if ((msr.lo & 0x7FF) == 0x104) {
/* If you had it you would need to clear out the fail boot count flag */
- /* (depending on where it counts from etc).*/
+ /* (depending on where it counts from etc). */
/* The reset we are about to perform clears the PM_SSC register in the */
- /* 5536 so will need to store the S3 resume flag in NVRAM otherwise */
- /* it would do a normal boot */
+ /* 5536 so will need to store the S3 resume flag in NVRAM otherwise */
+ /* it would do a normal boot */
/* Reset the system */
msrnum = MDD_SOFT_RESET;
msr = rdmsr(msrnum);
msr.lo |= 1;
wrmsr(msrnum, msr);
-}
+ }
print_debug("RAM DLL lock\r\n");
-
}
Modified: trunk/LinuxBIOSv2/src/northbridge/amd/lx/raminit.h
===================================================================
--- trunk/LinuxBIOSv2/src/northbridge/amd/lx/raminit.h 2007-05-10 18:00:24 UTC (rev 2648)
+++ trunk/LinuxBIOSv2/src/northbridge/amd/lx/raminit.h 2007-05-10 18:16:03 UTC (rev 2649)
@@ -27,4 +27,4 @@
uint16_t channel0[DIMM_SOCKETS];
};
-#endif /* RAMINIT_H */
+#endif /* RAMINIT_H */
More information about the coreboot
mailing list