[LinuxBIOS] r322 - in LinuxBIOSv3/mainboard/amd: . norwich

[svn at openbios.org]

Author: stepan
Date: 2007-05-18 20:01:18 +0200 (Fri, 18 May 2007)
New Revision: 322

Added:
   LinuxBIOSv3/mainboard/amd/norwich/Makefile
Modified:
   LinuxBIOSv3/mainboard/amd/Kconfig
Log:
small fixup for amd norwich skeleton (trivial)

Signed-off-by: Stefan Reinauer <stepan at coresystems.de>
Acked-by: Stefan Reinauer <stepan at coresystems.de>



Modified: LinuxBIOSv3/mainboard/amd/Kconfig
===================================================================
--- LinuxBIOSv3/mainboard/amd/Kconfig	2007-05-18 17:48:21 UTC (rev 321)
+++ LinuxBIOSv3/mainboard/amd/Kconfig	2007-05-18 18:01:18 UTC (rev 322)
@@ -3,15 +3,14 @@
 	depends on VENDOR_AMD
 
 config BOARD_AMD_NORWICH
-	bool "AMD Norwich (LX Devel)"
+	bool "Norwich"
 	select ARCH_X86
 	select CPU_AMD_GEODELX
 	select OPTION_TABLE
 	select NORTHBRIDGE_AMD_GEODELX
 	select SOUTHBRIDGE_AMD_CS5536
-	#select SUPERIO_WINBOND_W83627HF
 	help
-	  AMD Norwich Development board
+	  AMD Norwich Geode LX Development board
 endchoice
 
 source "mainboard/amd/norwich/Kconfig"

Added: LinuxBIOSv3/mainboard/amd/norwich/Makefile
===================================================================
--- LinuxBIOSv3/mainboard/amd/norwich/Makefile	                        (rev 0)
+++ LinuxBIOSv3/mainboard/amd/norwich/Makefile	2007-05-18 18:01:18 UTC (rev 322)
@@ -0,0 +1,85 @@
+##
+## This file is part of the LinuxBIOS project.
+##
+## Copyright (C) 2006-2007 coresystems GmbH
+## Written by Stefan Reinauer <stepan at coresystems.de> for coresystems GmbH.
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+##
+
+#
+# VPD or SIP ROM or ... how does NVIDIA call it?
+# Some space to cope with dirty southbridge tricks.
+# Do we want to put our own stuff there, too?
+#
+
+$(obj)/linuxbios.vpd:
+	$(Q)printf "  BUILD   DUMMY VPD\n"
+	$(Q)dd if=/dev/zero of=$(obj)/linuxbios.vpd bs=256 count=1 $(SILENT)
+
+#
+# This is going to be the init RAM code.
+#
+# The initram file is always uncompressed. It belongs into the mainboard
+# directory and is built from what was auto.c in v2.
+#
+# It should probably be renamed, as it does more than initram. 
+# auto.c is a bit too meaningless though.
+#
+
+$(obj)/linuxbios.initram: $(obj)/stage0.init $(obj)/stage0.o $(obj)/mainboard/$(MAINBOARDDIR)/initram.o
+	$(Q)# initram links against stage0
+	$(Q)printf "  LD      $(subst $(shell pwd)/,,$(@))\n"
+	$(Q)$(LD) -R $(obj)/stage0.o -Ttext 0x80000 \
+		$(obj)/mainboard/$(MAINBOARDDIR)/initram.o \
+		--entry=main -o $(obj)/linuxbios.initram.o
+	$(Q)printf "  OBJCOPY $(subst $(shell pwd)/,,$(@))\n"
+	$(Q)$(OBJCOPY) -O binary $(obj)/linuxbios.initram.o \
+		$(obj)/linuxbios.initram
+
+#
+# Miscellaneous important targets.
+#
+
+$(obj)/mainboard/$(MAINBOARDDIR)/mainboard.o: $(obj)/mainboard/$(MAINBOARDDIR)/statictree.o
+
+$(obj)/mainboard/$(MAINBOARDDIR)/statictree.o: $(obj)/mainboard/$(MAINBOARDDIR)/statictree.c
+	$(Q)printf "  CC      $(subst $(shell pwd)/,,$(@))\n"
+	$(Q)$(CC) $(CFLAGS) $(LINUXBIOSINCLUDE) -c -o $@ $<
+
+$(obj)/mainboard/$(MAINBOARDDIR)/statictree.c: $(src)/mainboard/$(MAINBOARDDIR)/dts $(obj)/util/dtc/dtc
+	$(Q)printf "  DTC     $(subst $(shell pwd)/,,$(@))\n"
+	$(Q)$(obj)/util/dtc/dtc -O lb mainboard/$(MAINBOARDDIR)/dts > $@
+
+$(obj)/mainboard/$(MAINBOARDDIR)/option_table.c: $(obj)/util/options/build_opt_tbl $(src)/mainboard/$(MAINBOARDDIR)/cmos.layout
+	$(Q)printf "  OPTIONS $(subst $(shell pwd)/,,$(@))\n"
+	$(Q)mkdir -p $(obj)/mainboard/$(MAINBOARDDIR)
+	$(Q)$(obj)/util/options/build_opt_tbl -b \
+		--config $(src)/mainboard/$(MAINBOARDDIR)/cmos.layout \
+		--option $(obj)/mainboard/$(MAINBOARDDIR)/option_table.c 
+
+$(obj)/option_table: $(obj)/mainboard/$(MAINBOARDDIR)/option_table.o
+	$(Q)printf "  OBJCOPY $(subst $(shell pwd)/,,$(@))\n"
+	$(Q)$(OBJCOPY) -O binary $< $@ 
+
+STAGE2_MAINBOARD_OBJ = mainboard.o vga.o 
+
+STAGE2_CHIPSET_OBJ = 
+
+$(obj)/mainboard/$(MAINBOARDDIR)/%.o: $(src)/mainboard/$(MAINBOARDDIR)/%.c
+	$(Q)mkdir -p $(obj)/mainboard/$(MAINBOARDDIR)
+	$(Q)printf "  CC      $(subst $(shell pwd)/,,$(@))\n"
+	$(Q)$(CC) $(INITCFLAGS) -c $< -o $@
+