[LinuxBIOS] Epia V

[Stefan Reinauer]

* Markus Boas <ryven at gmx.de> [070527 21:14]:
> Hi I have littel trouble with this mainboard.
> First: Is this normal?
> 
> <shnip>
> Capability: 0x10 @ 0x80
> PCI: 00:01.0 [1106/8601] enabled
> PCI: devfn 0x10, bad id 0xffffffff
> 
> I'm worry about  the bad id.
 
it just means no device on that address. Everything is fine. Turn
the debugging level down to avoid seeing it.

> Second:
> I used etherboot as payload, but it didn't came up.
> The last output from the serial communcation:
> 
> <shnip>
> LinuxBIOS-2.0.0.0Fallback Sun May 27 20:19:19 UTC 2007 starting...
> 87 is the comm register
> SMBus controller enabled
> vt8601 init starting
> 00000000 is the north
>                      1106 0601
> 0120d4 is the computed timing
>                              NOP
> PRECHARGE
> DUMMY READS
> CBR
> MRS
> NORMAL
> set ref. rate
> enable multi-page open
> Slot 00 is SDRAM
> <snap>


this rather looks like the first lines than the last ones. Can you
provide a full log? 

-- 
coresystems GmbH • Brahmsstr. 16 • D-79104 Freiburg i. Br.
      Tel.: +49 761 7668825 • Fax: +49 761 7664613
Email: info at coresystems.de  • http://www.coresystems.de/