[LinuxBIOS] getting sata disk working

[yhlu]

You could use btext console in LinuxBIOS for it. The etherboot (with
filo) should still include btext console too.

YH

On 5/31/07, Jeremy Jackson <jerj at coplanar.net> wrote:
> Hi,
>
> I'm using the LinuxBIOS  ragexl support, combined with linux framebuffer
> driver "atyfb".  Doing it this way is 100% native, no vendor BIOS is
> needed, but you don't get video until linux has booted.
>
> Config.lb looks like this
>        device pci 8.0 on end # SATA 0
>        device pci 9.0 on end # PCI
>             chip drivers/ati/ragexl
>                  device pci 5.0 on end
>             end
>
>
> The other option is to have LinuxBIOS use the vendor BIOS to initialize
> the rageXL chip, you get video earlier but you need to enable the
> emulator and retrieve the vendor bios,
>
> http://linuxbios.org/VGA_support
>
> Regards,
>
> Jeremy
>
> On Thu, 2007-05-31 at 17:43 +0400, Savchenko Mikhail wrote:
> > Working with Linuxbios on tyan s2850, want to use...
>
> > The same question about Ati video interesting to, there is a driver in
> > LinusBios sources, can I use it instead of Ami bios part one?
>
>
>
>
> --
> linuxbios mailing list
> linuxbios at linuxbios.org
> http://www.linuxbios.org/mailman/listinfo/linuxbios
>