[LinuxBIOS] #87: flashrom issues on m57sli-s4
Andreas B. Mundt
andi.mundt at web.de
Sat Nov 10 20:15:45 CET 2007
On Sat, Nov 10, 2007 at 05:04:32PM +0100, Carl-Daniel Hailfinger wrote:
> Hi Andi,
>
> Can you try this patch on top of the existing patch? It will give you
> better debug output for superio config.
>
> ......
>
> Can you then post the serial boot log (minicom capture)? It should have
> a few lines with "TRACE:" in it. Then we can check whether the values
> are set or not.
>
Hi Carl-Daniel,
here are the results, I have not looked into details yet, but the TRACE is there:
LinuxBIOS-2.0.0_m57sli_Fallback Sat Nov 10 20:04:37 CET 2007 starting...
*sysinfo range: [000cf000,000cf730)
bsp_apicid=00
core0 started:
started ap apicid: 01
SBLink=00
NC node|link=00
begin msr fid, vid 3107121207110202
set fid failed for apicid =00
end msr fid, vid 3107120707110210
mcp55_num:01
ht reset -
LinuxBIOS-2.0.0_m57sli_Fallback Sat Nov 10 20:04:37 CET 2007 starting...
*sysinfo range: [000cf000,000cf730)
bsp_apicid=00
core0 started:
started ap apicid: 01
SBLink=00
NC node|link=00
begin msr fid, vid 3107120707110210
set fid failed for apicid =00
end msr fid, vid 3107120707110210
mcp55_num:01
Ram1.00
Ram2.00
Unbuffered
333Mhz
Interleaved
RAM: 0x00400000 KB
Ram3
dimm_mask = 00000033
x4_mask = 00000000
x16_mask = 00000000
single_rank_mask = 00000000
ODC = 00111322
Addr Timing= 002b2220
Initializing memory: done
RAM: 0x00500000 KB
Setting variable MTRR 2, base: 0MB, range: 2048MB, type WB
Setting variable MTRR 3, base: 2048MB, range: 1024MB, type WB
set DQS timing:RcvrEn:Pass1: 00 CTLRMaxDelay=13 done
set DQS timing:DQSPos: 00 done
set DQS timing:RcvrEn:Pass2: 00 CTLRMaxDelay=34 done
Total DQS Training : tsc [00]=0000000045b035fc
Total DQS Training : tsc [01]=000000004760b7a6
Total DQS Training : tsc [02]=00000000de2ca1bf
Total DQS Training : tsc [03]=00000000e067edff
Ram4
v_esp=000ceea8
testx = 5a5a5a5a
Copying data from cache to RAM -- switching to use RAM as stack... Done
testx = 5a5a5a5a
Disabling cache as ram now
Clearing initial memory region: Done
Copying LinuxBIOS to RAM.
src=fffdf000
dst=00100000
linxbios_ram.nrv2b length = 0000d68c
linxbios_ram.bin length = 000224ec
Jumping to LinuxBIOS.
LinuxBIOS-2.0.0_m57sli_Fallback Sat Nov 10 20:04:37 CET 2007 booting...
Enumerating buses...
APIC_CLUSTER: 0 enabled
PCI_DOMAIN: 0000 enabled
PCI: 00:18.3 siblings=1
CPU: APIC: 00 enabled
CPU: APIC: 01 enabled
PCI: pci_scan_bus for bus 00
PCI: 00:18.0 [1022/1100] enabled
PCI: 00:18.1 [1022/1101] enabled
PCI: 00:18.2 [1022/1102] enabled
PCI: 00:18.3 [1022/1103] enabled
PCI: 00:00.0 [10de/0369] enabled
PCI: 00:00.0 [10de/0369] enabled next_unitid: 0010
PCI: pci_scan_bus for bus 00
PCI: 00:00.0 [10de/0369] enabled
PCI: 00:01.0 [10de/0360] enabled
PCI: 00:01.1 [10de/0368] enabled
PCI: 00:01.2 [10de/036a] enabled
PCI: 00:01.3 [10de/036b] enabled
PCI: 00:02.0 [10de/036c] enabled
PCI: 00:02.1 [10de/036d] enabled
PCI: 00:04.0 [10de/036e] enabled
PCI: 00:05.0 [10de/037f] enabled
PCI: 00:05.1 [10de/037f] enabled
PCI: 00:05.2 [10de/037f] enabled
PCI: 00:06.0 [10de/0370] enabled
PCI: 00:06.1 [10de/0371] enabled
PCI: 00:08.0 [10de/0373] enabled
PCI: 00:0a.0 [10de/0376] enabled
PCI: 00:0b.0 [10de/0374] enabled
PCI: 00:0c.0 [10de/0374] enabled
PCI: 00:0d.0 [10de/0378] enabled
PCI: 00:0e.0 [10de/0375] enabled
PCI: 00:0f.0 [10de/0377] enabled
PNP: 002e.0 disabled
PNP: 002e.1 enabled
PNP: 002e.2 disabled
PNP: 002e.3 disabled
PNP: 002e.4 enabled
PNP: 002e.5 enabled
PNP: 002e.6 enabled
PNP: 002e.7 enabled
PNP: 002e.8 disabled
PNP: 002e.9 disabled
PNP: 002e.a disabled
smbus: PCI: 00:01.1[0]->I2C: 01:50 enabled
smbus: PCI: 00:01.1[0]->I2C: 01:51 enabled
smbus: PCI: 00:01.1[0]->I2C: 01:52 enabled
smbus: PCI: 00:01.1[0]->I2C: 01:53 enabled
smbus: PCI: 00:01.1[0]->I2C: 01:54 enabled
smbus: PCI: 00:01.1[0]->I2C: 01:55 enabled
smbus: PCI: 00:01.1[0]->I2C: 01:56 enabled
smbus: PCI: 00:01.1[0]->I2C: 01:57 enabled
smbus: PCI: 00:01.1[1]->I2C: 02:51 enabled
PCI: pci_scan_bus for bus 01
PCI: 01:07.0 [1102/0002] enabled
PCI: 01:07.1 [1102/7002] enabled
PCI: 01:0a.0 [104c/8024] enabled
PCI: pci_scan_bus returning with max=001
PCI: pci_scan_bus for bus 02
PCI: pci_scan_bus returning with max=002
PCI: pci_scan_bus for bus 03
PCI: pci_scan_bus returning with max=003
PCI: pci_scan_bus for bus 04
PCI: pci_scan_bus returning with max=004
PCI: pci_scan_bus for bus 05
PCI: pci_scan_bus returning with max=005
PCI: pci_scan_bus for bus 06
PCI: pci_scan_bus returning with max=006
PCI: pci_scan_bus for bus 07
PCI: 07:00.0 [10de/0392] enabled
PCI: pci_scan_bus returning with max=007
PCI: pci_scan_bus returning with max=007
PCI: pci_scan_bus returning with max=007
done
Allocating resources...
Reading resources...
PNP: 002e.7 missing read_resources
PCI: 00:06.0 24 <- [0x00fff00000 - 0x00ffefffff] size 0x00000000 gran 0x14 bus 01 prefmem
PCI: 00:0a.0 1c <- [0x00fffff000 - 0x00ffffefff] size 0x00000000 gran 0x0c bus 02 io
PCI: 00:0a.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] size 0x00000000 gran 0x14 bus 02 prefmem
PCI: 00:0a.0 20 <- [0x00fff00000 - 0x00ffefffff] size 0x00000000 gran 0x14 bus 02 mem
PCI: 00:0b.0 1c <- [0x00fffff000 - 0x00ffffefff] size 0x00000000 gran 0x0c bus 03 io
PCI: 00:0b.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] size 0x00000000 gran 0x14 bus 03 prefmem
PCI: 00:0b.0 20 <- [0x00fff00000 - 0x00ffefffff] size 0x00000000 gran 0x14 bus 03 mem
PCI: 00:0c.0 1c <- [0x00fffff000 - 0x00ffffefff] size 0x00000000 gran 0x0c bus 04 io
PCI: 00:0c.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] size 0x00000000 gran 0x14 bus 04 prefmem
PCI: 00:0c.0 20 <- [0x00fff00000 - 0x00ffefffff] size 0x00000000 gran 0x14 bus 04 mem
PCI: 00:0d.0 1c <- [0x00fffff000 - 0x00ffffefff] size 0x00000000 gran 0x0c bus 05 io
PCI: 00:0d.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] size 0x00000000 gran 0x14 bus 05 prefmem
PCI: 00:0d.0 20 <- [0x00fff00000 - 0x00ffefffff] size 0x00000000 gran 0x14 bus 05 mem
PCI: 00:0e.0 1c <- [0x00fffff000 - 0x00ffffefff] size 0x00000000 gran 0x0c bus 06 io
PCI: 00:0e.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] size 0x00000000 gran 0x14 bus 06 prefmem
PCI: 00:0e.0 20 <- [0x00fff00000 - 0x00ffefffff] size 0x00000000 gran 0x14 bus 06 mem
Done reading resources.
Allocating VGA resource PCI: 07:00.0
Setting PCI_BRIDGE_CTL_VGA for bridge PCI: 00:0f.0
Setting PCI_BRIDGE_CTL_VGA for bridge PCI: 00:18.0
Setting PCI_BRIDGE_CTL_VGA for bridge PCI_DOMAIN: 0000
Setting PCI_BRIDGE_CTL_VGA for bridge Root Device
Setting resources...
VGA: PCI: 00:18.0 (aka node 0) link 0 has VGA device
PCI: 00:18.0 1c0 <- [0x0000001000 - 0x0000004fff] size 0x00004000 gran 0x0c io <node 0 link 0>
PCI: 00:18.0 1b8 <- [0x00e0000000 - 0x00efffffff] size 0x10000000 gran 0x14 prefmem <node 0 link 0>
PCI: 00:18.0 1b0 <- [0x00f4000000 - 0x00f62fffff] size 0x02300000 gran 0x14 mem <node 0 link 0>
PCI: 00:01.0 14 <- [0x00f6244000 - 0x00f6244fff] size 0x00001000 gran 0x0c mem
TRACE: PNP: 002e.1, selecting logical device 01
TRACE: PNP: 002e.1, index 60: writing 03f8
PNP: 002e.1 60 <- [0x00000003f8 - 0x00000003ff] size 0x00000008 gran 0x03 io
TRACE: PNP: 002e.1, index 70: writing 0004
PNP: 002e.1 70 <- [0x0000000004 - 0x0000000004] size 0x00000001 gran 0x00 irq
TRACE: PNP: 002e.4, selecting logical device 04
TRACE: PNP: 002e.4, index 60: writing 0290
PNP: 002e.4 60 <- [0x0000000290 - 0x0000000297] size 0x00000008 gran 0x03 io
TRACE: PNP: 002e.4, index 62: writing 0230
PNP: 002e.4 62 <- [0x0000000230 - 0x0000000237] size 0x00000008 gran 0x03 io
TRACE: PNP: 002e.4, index 70: writing 0009
PNP: 002e.4 70 <- [0x0000000009 - 0x0000000009] size 0x00000001 gran 0x00 irq
TRACE: PNP: 002e.5, selecting logical device 05
TRACE: PNP: 002e.5, index 60: writing 0060
PNP: 002e.5 60 <- [0x0000000060 - 0x0000000060] size 0x00000001 gran 0x00 io
TRACE: PNP: 002e.5, index 62: writing 0064
PNP: 002e.5 62 <- [0x0000000064 - 0x0000000064] size 0x00000001 gran 0x00 io
TRACE: PNP: 002e.5, index 70: writing 0001
PNP: 002e.5 70 <- [0x0000000001 - 0x0000000001] size 0x00000001 gran 0x00 irq
TRACE: PNP: 002e.6, selecting logical device 06
TRACE: PNP: 002e.6, index 70: writing 000c
PNP: 002e.6 70 <- [0x000000000c - 0x000000000c] size 0x00000001 gran 0x00 irq
PNP: 002e.7 missing set_resources
PCI: 00:01.1 10 <- [0x0000003c00 - 0x0000003c3f] size 0x00000040 gran 0x06 io
PCI: 00:01.1 20 <- [0x0000003c40 - 0x0000003c7f] size 0x00000040 gran 0x06 io
PCI: 00:01.1 24 <- [0x0000003c80 - 0x0000003cbf] size 0x00000040 gran 0x06 io
PCI: 00:01.1 60 <- [0x0000003000 - 0x00000030ff] size 0x00000100 gran 0x08 io
PCI: 00:01.1 64 <- [0x0000003400 - 0x00000034ff] size 0x00000100 gran 0x08 io
PCI: 00:01.1 68 <- [0x0000003800 - 0x00000038ff] size 0x00000100 gran 0x08 io
PCI: 00:01.3 10 <- [0x00f6200000 - 0x00f623ffff] size 0x00040000 gran 0x12 mem
PCI: 00:02.0 10 <- [0x00f6245000 - 0x00f6245fff] size 0x00001000 gran 0x0c mem
PCI: 00:02.1 10 <- [0x00f624a000 - 0x00f624a0ff] size 0x00000100 gran 0x08 mem
PCI: 00:04.0 20 <- [0x0000003cc0 - 0x0000003ccf] size 0x00000010 gran 0x04 io
PCI: 00:05.0 10 <- [0x0000004000 - 0x0000004007] size 0x00000008 gran 0x03 io
PCI: 00:05.0 14 <- [0x0000004070 - 0x0000004073] size 0x00000004 gran 0x02 io
PCI: 00:05.0 18 <- [0x0000004010 - 0x0000004017] size 0x00000008 gran 0x03 io
PCI: 00:05.0 1c <- [0x0000004080 - 0x0000004083] size 0x00000004 gran 0x02 io
PCI: 00:05.0 20 <- [0x0000003cd0 - 0x0000003cdf] size 0x00000010 gran 0x04 io
PCI: 00:05.0 24 <- [0x00f6246000 - 0x00f6246fff] size 0x00001000 gran 0x0c mem
PCI: 00:05.1 10 <- [0x0000004020 - 0x0000004027] size 0x00000008 gran 0x03 io
PCI: 00:05.1 14 <- [0x0000004090 - 0x0000004093] size 0x00000004 gran 0x02 io
PCI: 00:05.1 18 <- [0x0000004030 - 0x0000004037] size 0x00000008 gran 0x03 io
PCI: 00:05.1 1c <- [0x00000040a0 - 0x00000040a3] size 0x00000004 gran 0x02 io
PCI: 00:05.1 20 <- [0x0000003ce0 - 0x0000003cef] size 0x00000010 gran 0x04 io
PCI: 00:05.1 24 <- [0x00f6247000 - 0x00f6247fff] size 0x00001000 gran 0x0c mem
PCI: 00:05.2 10 <- [0x0000004040 - 0x0000004047] size 0x00000008 gran 0x03 io
PCI: 00:05.2 14 <- [0x00000040b0 - 0x00000040b3] size 0x00000004 gran 0x02 io
PCI: 00:05.2 18 <- [0x0000004050 - 0x0000004057] size 0x00000008 gran 0x03 io
PCI: 00:05.2 1c <- [0x00000040c0 - 0x00000040c3] size 0x00000004 gran 0x02 io
PCI: 00:05.2 20 <- [0x0000003cf0 - 0x0000003cff] size 0x00000010 gran 0x04 io
PCI: 00:05.2 24 <- [0x00f6248000 - 0x00f6248fff] size 0x00001000 gran 0x0c mem
PCI: 00:06.0 1c <- [0x0000001000 - 0x0000001fff] size 0x00001000 gran 0x0c bus 01 io
PCI: 00:06.0 20 <- [0x00f6100000 - 0x00f61fffff] size 0x00100000 gran 0x14 bus 01 mem
PCI: 01:07.0 10 <- [0x0000001000 - 0x000000101f] size 0x00000020 gran 0x05 io
PCI: 01:07.1 10 <- [0x0000001020 - 0x0000001027] size 0x00000008 gran 0x03 io
PCI: 01:0a.0 10 <- [0x00f6104000 - 0x00f61047ff] size 0x00000800 gran 0x0b mem
PCI: 01:0a.0 14 <- [0x00f6100000 - 0x00f6103fff] size 0x00004000 gran 0x0e mem
PCI: 00:06.1 10 <- [0x00f6240000 - 0x00f6243fff] size 0x00004000 gran 0x0e mem
PCI: 00:08.0 10 <- [0x00f6249000 - 0x00f6249fff] size 0x00001000 gran 0x0c mem
PCI: 00:08.0 14 <- [0x0000004060 - 0x0000004067] size 0x00000008 gran 0x03 io
PCI: 00:08.0 18 <- [0x00f624b000 - 0x00f624b0ff] size 0x00000100 gran 0x08 mem
PCI: 00:08.0 1c <- [0x00f624c000 - 0x00f624c00f] size 0x00000010 gran 0x04 mem
PCI: 00:0f.0 1c <- [0x0000002000 - 0x0000002fff] size 0x00001000 gran 0x0c bus 07 io
PCI: 00:0f.0 24 <- [0x00e0000000 - 0x00efffffff] size 0x10000000 gran 0x14 bus 07 prefmem
PCI: 00:0f.0 20 <- [0x00f4000000 - 0x00f60fffff] size 0x02100000 gran 0x14 bus 07 mem
PCI: 07:00.0 10 <- [0x00f4000000 - 0x00f4ffffff] size 0x01000000 gran 0x18 mem
PCI: 07:00.0 14 <- [0x00e0000000 - 0x00efffffff] size 0x10000000 gran 0x1c prefmem64
PCI: 07:00.0 1c <- [0x00f5000000 - 0x00f5ffffff] size 0x01000000 gran 0x18 mem64
PCI: 07:00.0 24 <- [0x0000002000 - 0x000000207f] size 0x00000080 gran 0x07 io
PCI: 07:00.0 30 <- [0x00f6000000 - 0x00f601ffff] size 0x00020000 gran 0x11 romem
PCI: 00:18.3 94 <- [0x00f0000000 - 0x00f3ffffff] size 0x04000000 gran 0x1a mem <gart>
Done setting resources.
Done allocating resources.
Enabling resources...
PCI: 00:18.0 cmd <- 00
PCI: 00:00.0 subsystem <- 1022/2b80
PCI: 00:00.0 cmd <- 06
PCI: 00:01.0 subsystem <- 1022/2b80
PCI: 00:01.0 cmd <- 0f
mcp55 lpc decode:PNP: 002e.1, base=0x000003f8, end=0x000003ff
mcp55 lpc decode:PNP: 002e.4, base=0x00000290, end=0x00000297
mcp55 lpc decode:PNP: 002e.4, base=0x00000230, end=0x00000237
mcp55 lpc decode:PNP: 002e.5, base=0x00000060, end=0x00000060
mcp55 lpc decode:PNP: 002e.5, base=0x00000064, end=0x00000064
PNP: 002e.7 missing enable_resources
PCI: 00:01.1 subsystem <- 1022/2b80
PCI: 00:01.1 cmd <- 01
PCI: 00:01.2 cmd <- 400
PCI: 00:01.3 cmd <- 02
PCI: 00:02.0 subsystem <- 1022/2b80
PCI: 00:02.0 cmd <- 02
PCI: 00:02.1 subsystem <- 1022/2b80
PCI: 00:02.1 cmd <- 02
PCI: 00:04.0 subsystem <- 1022/2b80
PCI: 00:04.0 cmd <- 01
PCI: 00:05.0 subsystem <- 1022/2b80
PCI: 00:05.0 cmd <- 03
PCI: 00:05.1 subsystem <- 1022/2b80
PCI: 00:05.1 cmd <- 03
PCI: 00:05.2 subsystem <- 1022/2b80
PCI: 00:05.2 cmd <- 03
PCI: 00:06.0 bridge ctrl <- 0a03
PCI: 00:06.0 cmd <- 107
PCI: 01:07.0 cmd <- 01
PCI: 01:07.1 cmd <- 01
PCI: 01:0a.0 cmd <- 02
PCI: 00:06.1 subsystem <- 1022/2b80
PCI: 00:06.1 cmd <- 02
PCI: 00:08.0 subsystem <- 1022/2b80
PCI: 00:08.0 cmd <- 03
PCI: 00:0a.0 bridge ctrl <- 0003
PCI: 00:0a.0 cmd <- 00
PCI: 00:0b.0 bridge ctrl <- 0003
PCI: 00:0b.0 cmd <- 00
PCI: 00:0c.0 bridge ctrl <- 0003
PCI: 00:0c.0 cmd <- 00
PCI: 00:0d.0 bridge ctrl <- 0003
PCI: 00:0d.0 cmd <- 00
PCI: 00:0e.0 bridge ctrl <- 0003
PCI: 00:0e.0 cmd <- 00
PCI: 00:0f.0 bridge ctrl <- 000b
PCI: 00:0f.0 cmd <- 07
PCI: 07:00.0 cmd <- 03
PCI: 00:18.1 subsystem <- 1022/2b80
PCI: 00:18.1 cmd <- 00
PCI: 00:18.2 subsystem <- 1022/2b80
PCI: 00:18.2 cmd <- 00
PCI: 00:18.3 cmd <- 00
done.
Initializing devices...
Root Device init
APIC_CLUSTER: 0 init
start_eip=0x00006000, offset=0x00110000, code_size=0x0000005b
Initializing CPU #0
CPU: vendor AMD device 60fb1
CPU: family 0f, model 6b, stepping 01
Enabling cache
Setting fixed MTRRs(0-88) type: UC
Setting fixed MTRRs(0-16) Type: WB, RdMEM, WrMEM
Setting fixed MTRRs(24-88) Type: WB, RdMEM, WrMEM
DONE fixed MTRRs
Setting variable MTRR 0, base: 0MB, range: 4096MB, type WB
Setting variable MTRR 1, base: 4096MB, range: 1024MB, type WB
Setting variable MTRR 2, base: 3072MB, range: 1024MB, type UC
DONE variable MTRRs
Clear out the extra MTRR's
MTRR check
Fixed MTRRs : Enabled
Variable MTRRs: Enabled
CPU model AMD Athlon(tm) 64 X2 Dual Core Processor 4800+
Setting up local apic... apic_id: 0x00 done.
ECC Disabled
CPU #0 Initialized
Initializing CPU #1
Waiting for 1 CPUS to stop
CPU: vendor AMD device 60fb1
CPU: family 0f, model 6b, stepping 01
Enabling cache
Setting fixed MTRRs(0-88) type: UC
Setting fixed MTRRs(0-16) Type: WB, RdMEM, WrMEM
Setting fixed MTRRs(24-88) Type: WB, RdMEM, WrMEM
DONE fixed MTRRs
Setting variable MTRR 0, base: 0MB, range: 4096MB, type WB
Setting variable MTRR 1, base: 4096MB, range: 1024MB, type WB
Setting variable MTRR 2, base: 3072MB, range: 1024MB, type UC
DONE variable MTRRs
Clear out the extra MTRR's
MTRR check
Fixed MTRRs : Enabled
Variable MTRRs: Enabled
CPU model AMD Athlon(tm) 64 X2 Dual Core Processor 4800+
Setting up local apic... apic_id: 0x01 done.
CPU #1 Initialized
All AP CPUs stopped
PCI: 00:18.0 init
PCI: 00:01.0 init
set power on after power fail
RTC Init
RTC: Checksum invalid zeroing cmos
Invalid CMOS LB checksum
PNP: 002e.1 init
PNP: 002e.4 init
FAN_CTL: reg = 0x02a9, read value = 0x50
FAN_CTL: reg = 0x02a9, writing value = 0xd7
PNP: 002e.5 init
Keyboard init...
PNP: 002e.6 init
PCI: 00:01.1 init
PCI: 00:02.1 init
PCI: 00:04.0 init
IDE0
PCI: 00:05.0 init
SATA S SATA P
PCI: 00:05.1 init
SATA S SATA P
PCI: 00:05.2 init
SATA S SATA P
PCI: 00:06.0 init
dev_root mem base = 0x00e0000000
[0x50] <-- 0xe0000000
PCI: 00:06.1 init
base = f6240000
codec_mask = 01
codec viddid: 10ec0883
No verb!
PCI: 00:08.0 init
MCP55 MAC PHY ID 0x01410c00 PHY ADDR 1
PCI: 00:0a.0 init
PCI: 00:0b.0 init
PCI: 00:0c.0 init
PCI: 00:0d.0 init
PCI: 00:0e.0 init
PCI: 00:0f.0 init
PCI: 00:18.1 init
PCI: 00:18.2 init
PCI: 00:18.3 init
NB: Function 3 Misc Control.. done.
PCI: 00:01.2 init
PCI: 00:01.3 init
PCI: 01:07.0 init
PCI: 01:07.1 init
PCI: 01:0a.0 init
PCI: 07:00.0 init
rom address for PCI: 07:00.0 = f6000000
copying VGA ROM Image from 0xf6000000 to 0xc0000, 0xf600 bytes
entering emulator
halt_sys: file /home/andi/freeBIOS/LinuxBIOSv2/src/devices/emulator/x86emu/ops.c, line 4387
Devices initialized
Writing IRQ routing tables to 0xf0000...done.
Wrote the mp table end at: 00000020 - 00000274
Moving GDT to 0x500...ok
Adjust low_table_end from 0x00000530 to 0x00001000
Adjust rom_table_end from 0x000f0400 to 0x00100000
Wrote linuxbios table at: 00000530 - 00000e20 checksum 9ef5
Welcome to elfboot, the open sourced starter.
January 2002, Eric Biederman.
Version 1.3
rom_stream: 0xfffc0000 - 0xfffdefff
Found ELF candidate at offset 0
header_offset is 0
Try to load at offset 0x0
New segment addr 0x100000 size 0x3dd80 offset 0xc0 filesize 0x13d68
(cleaned up) New segment addr 0x100000 size 0x3dd80 offset 0xc0 filesize 0x13d68
New segment addr 0x13dd80 size 0x48 offset 0x13e40 filesize 0x48
(cleaned up) New segment addr 0x13dd80 size 0x48 offset 0x13e40 filesize 0x48
Dropping non PT_LOAD segment
Dropping non PT_LOAD segment
Loading Segment: addr: 0x00000000bff80000 memsz: 0x000000000003dd80 filesz: 0x0000000000013d68
Clearing Segment: addr: 0x00000000bff93d68 memsz: 0x000000000002a018
Loading Segment: addr: 0x00000000bffbdd80 memsz: 0x0000000000000048 filesz: 0x0000000000000048
Jumping to boot code at 0x10ef9c
FILO version 0.5 (andi at flashgordon) Sun Jun 24 11:47:31 CEST 2007
setup_timers: CPU 2400 MHz
menu: hde5:/grub/menu.lst
find_ide_controller: found PCI IDE controller 10de:037f prog_if=0x85
find_ide_controller: primary channel: native PCI mode
find_ide_controller: cmd_base=0x4000 ctrl_base=0x4070
ide_software_reset: Waiting for ide2 to become ready for reset... ok
init_drive: Testing for hde
init_drive: Probing for hde
init_drive: LBA mode, sectors=268435455
init_drive: LBA48 mode, sectors=488395055
init_drive: Init device params... ok
hde: LBA48 250GB: SAMSUNG SP2504C
init_drive: Testing for hdf
init_drive: Probing for hdf
print_status: IDE: status=0x0, err=0x0
init_drive: Testing for hdf
init_drive: Probing for hdf
print_status: IDE: status=0x0, err=0x0
open_pc_partition: Extended partition at 4
open_pc_partition: cur_part=4 at 132825420
devopen: Partition 5 start 132825483 length 2040192
Mounted ext2fs
find_ide_controller: found PCI IDE controller 10de:036e prog_if=0x8a
find_ide_controller: primary channel: compatibility mode
find_ide_controller: cmd_base=0x1f0 ctrl_base=0x3f4
ide_software_reset: Waiting for ide0 to become ready for reset... ok
init_drive: Testing for hda
init_drive: Probing for hda
print_status: IDE: status=0x51, err=0x4
init_drive: Testing for hda
init_drive: Probing for hda
hda: ATAPI: Optiarc DVD RW AD-7173A
pio_packet: no drq after sending packet
print_status: IDE: status=0x51, err=0x64
atapi_request_sense: 70 00 06 00 00 00 00 0a 00 00 00 00 29 00 00 00 00 00
pio_packet: no drq after sending packet
print_status: IDE: status=0x51, err=0x24
atapi_request_sense: 70 00 02 00 00 00 00 0a 00 00 00 00 3a 00 00 80 46 d3
atapi_detect_medium: Device reports MEDIUM NOT PRESENT
Media detection failed
devopen: failed to open ide
pio_packet: no drq after sending packet
print_status: IDE: status=0x51, err=0x24
atapi_request_sense: 70 00 02 00 00 00 00 0a 00 00 00 00 3a 00 00 80 46 d3
atapi_detect_medium: Device reports MEDIUM NOT PRESENT
Media detection failed
devopen: failed to open ide
pio_packet: no drq after sending packet
print_status: IDE: status=0x51, err=0x24
atapi_request_sense: 70 00 02 00 00 00 00 0a 00 00 00 00 3a 00 00 80 47 ae
atapi_detect_medium: Device reports MEDIUM NOT PRESENT
Media detection failed
devopen: failed to open ide
pio_packet: no drq after sending packet
print_status: IDE: status=0x51, err=0x24
atapi_request_sense: 70 00 02 00 00 00 00 0a 00 00 00 00 3a 00 00 80 47 ae
atapi_detect_medium: Device reports MEDIUM NOT PRESENT
Media detection failed
devopen: failed to open ide
pio_packet: no drq after sending packet
print_status: IDE: status=0x51, err=0x24
atapi_request_sense: 70 00 02 00 00 00 00 0a 00 00 00 00 3a 00 00 80 47 ae
atapi_detect_medium: Device reports MEDIUM NOT PRESENT
Media detection failed
devopen: failed to open ide
pio_packet: no drq after sending packet
print_status: IDE: status=0x51, err=0x24
atapi_request_sense: 70 00 02 00 00 00 00 0a 00 00 00 00 3a 00 00 80 48 88
atapi_detect_medium: Device reports MEDIUM NOT PRESENT
Media detection failed
devopen: failed to open ide
pio_packet: no drq after sending packet
print_status: IDE: status=0x51, err=0x24
atapi_request_sense: 70 00 02 00 00 00 00 0a 00 00 00 00 3a 00 00 80 48 88
atapi_detect_medium: Device reports MEDIUM NOT PRESENT
Media detection failed
devopen: failed to open ide
pio_packet: no drq after sending packet
print_status: IDE: status=0x51, err=0x24
atapi_request_sense: 70 00 02 00 00 00 00 0a 00 00 00 00 3a 00 00 80 48 88
atapi_detect_medium: Device reports MEDIUM NOT PRESENT
Media detection failed
devopen: failed to open ide
pio_packet: no drq after sending packet
print_status: IDE: status=0x51, err=0x24
atapi_request_sense: 70 00 02 00 00 00 00 0a 00 00 00 00 3a 00 00 80 49 62
atapi_detect_medium: Device reports MEDIUM NOT PRESENT
Media detection failed
devopen: failed to open ide
pio_packet: no drq after sending packet
print_status: IDE: status=0x51, err=0x24
atapi_request_sense: 70 00 02 00 00 00 00 0a 00 00 00 00 3a 00 00 80 49 62
atapi_detect_medium: Device reports MEDIUM NOT PRESENT
Media detection failed
devopen: failed to open ide
pio_packet: no drq after sending packet
print_status: IDE: status=0x51, err=0x24
atapi_request_sense: 70 00 02 00 00 00 00 0a 00 00 00 00 3a 00 00 80 49 62
atapi_detect_medium: Device reports MEDIUM NOT PRESENT
Media detection failed
devopen: failed to open ide
devopen: already open
Mounted ext2fs
devopen: already open
Found Linux version 2.6.21 (root at flashgordon) #4 SMP Sun Jun 24 21:35:21 CEST 2007 bzImage.
Loading kernel... ok
Jumping to entry point...
More information about the coreboot
mailing list