[LinuxBIOS] alix1c for v3 update
Peter Stuge
peter at stuge.se
Tue Nov 27 17:36:49 CET 2007
On Tue, Nov 27, 2007 at 08:02:02AM -0800, ron minnich wrote:
> +++ mainboard/pcengines/alix1c/stage1.c (working copy)
>
> +#define SERIAL_DEV W83627HF_SP1
> +#define SERIAL_IOBASE 0x3f8
> +++ mainboard/pcengines/alix1c/dts (working copy)
> @@ -37,5 +37,9 @@
> pcipath = "0xf,1";
> enabled;
> };
> + superio {
> + /config/("superio/winbond/w83627hf");
> + com1enable = "1";
> + };
Why is the port needed in stage1.c?
I would like it to be tied either to the superio (preferably) or in
the dts, if there is positively no other place to put it.
//Peter
More information about the coreboot
mailing list