[LinuxBIOS] [PATCH] v3: factor out one makefile rule

[Carl-Daniel Hailfinger]

Factor out one identical makefile rule from all mainboard makefiles to
the x86 arch makefile. This makes porting to a new mainboard less confusing.

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006 at gmx.net>

Index: LinuxBIOSv3/mainboard/adl/msm800sev/Makefile
===================================================================
--- LinuxBIOSv3/mainboard/adl/msm800sev/Makefile	(Revision 527)
+++ LinuxBIOSv3/mainboard/adl/msm800sev/Makefile	(Arbeitskopie)
@@ -32,11 +32,3 @@
 		$(obj)/southbridge/amd/cs5536/smbus_initram.o \
 		$(obj)/arch/x86/geodelx/geodelx.o
 
-$(obj)/linuxbios.initram.o $(obj)/linuxbios.initram.map: $(obj)/stage0.init $(obj)/stage0-prefixed.o $(patsubst %.o,%_xip.o,$(INITRAM_OBJ))
-	$(Q)# initram links against stage0
-	$(Q)printf "  LD      $(subst $(shell pwd)/,,$(@))\n"
-	$(Q)$(LD) -Ttext 0 --entry main -N -R $(obj)/stage0-prefixed.o \
-		$(patsubst %.o,%_xip.o,$(INITRAM_OBJ)) -o $(obj)/linuxbios.initram.o
-	$(Q)printf "  NM      $(subst $(shell pwd)/,,$(@))\n"
-	$(Q)$(NM) $(obj)/linuxbios.initram.o | sort -u > $(obj)/linuxbios.initram.map
-
Index: LinuxBIOSv3/mainboard/amd/norwich/Makefile
===================================================================
--- LinuxBIOSv3/mainboard/amd/norwich/Makefile	(Revision 527)
+++ LinuxBIOSv3/mainboard/amd/norwich/Makefile	(Arbeitskopie)
@@ -32,11 +32,3 @@
 	$(Q)printf "  BUILD   DUMMY VPD\n"
 	$(Q)dd if=/dev/zero of=$(obj)/linuxbios.vpd bs=256 count=1 $(SILENT)
 
-$(obj)/linuxbios.initram.o $(obj)/linuxbios.initram.map: $(obj)/stage0.init $(obj)/stage0-prefixed.o $(patsubst %.o,%_xip.o,$(INITRAM_OBJ))
-	$(Q)# initram links against stage0
-	$(Q)printf "  LD      $(subst $(shell pwd)/,,$(@))\n"
-	$(Q)$(LD) -Ttext 0 --entry main -N -R $(obj)/stage0-prefixed.o \
-		$(patsubst %.o,%_xip.o,$(INITRAM_OBJ)) -o $(obj)/linuxbios.initram.o
-	$(Q)printf "  NM      $(subst $(shell pwd)/,,$(@))\n"
-	$(Q)$(NM) $(obj)/linuxbios.initram.o | sort -u > $(obj)/linuxbios.initram.map
-
Index: LinuxBIOSv3/mainboard/artecgroup/dbe61/Makefile
===================================================================
--- LinuxBIOSv3/mainboard/artecgroup/dbe61/Makefile	(Revision 527)
+++ LinuxBIOSv3/mainboard/artecgroup/dbe61/Makefile	(Arbeitskopie)
@@ -30,11 +30,3 @@
 INITRAM_OBJ =   $(obj)/mainboard/$(MAINBOARDDIR)/initram.o \
 		$(obj)/arch/x86/geodelx/geodelx.o
 
-$(obj)/linuxbios.initram.o $(obj)/linuxbios.initram.map: $(obj)/stage0.init $(obj)/stage0-prefixed.o $(patsubst %.o,%_xip.o,$(INITRAM_OBJ))
-	$(Q)# initram links against stage0
-	$(Q)printf "  LD      $(subst $(shell pwd)/,,$(@))\n"
-	$(Q)$(LD) -Ttext 0 --entry main -N -R $(obj)/stage0-prefixed.o \
-		$(patsubst %.o,%_xip.o,$(INITRAM_OBJ)) -o $(obj)/linuxbios.initram.o
-	$(Q)printf "  NM      $(subst $(shell pwd)/,,$(@))\n"
-	$(Q)$(NM) $(obj)/linuxbios.initram.o | sort -u > $(obj)/linuxbios.initram.map
-
Index: LinuxBIOSv3/mainboard/pcengines/alix1c/Makefile
===================================================================
--- LinuxBIOSv3/mainboard/pcengines/alix1c/Makefile	(Revision 527)
+++ LinuxBIOSv3/mainboard/pcengines/alix1c/Makefile	(Arbeitskopie)
@@ -31,11 +31,3 @@
 	$(Q)printf "  BUILD   DUMMY VPD\n"
 	$(Q)dd if=/dev/zero of=$(obj)/linuxbios.vpd bs=256 count=1 $(SILENT)
 
-$(obj)/linuxbios.initram.o $(obj)/linuxbios.initram.map: $(obj)/stage0.init $(obj)/stage0-prefixed.o $(patsubst %.o,%_xip.o,$(INITRAM_OBJ))
-	$(Q)# initram links against stage0
-	$(Q)printf "  LD      $(subst $(shell pwd)/,,$(@))\n"
-	$(Q)$(LD) -Ttext 0 --entry main -N -R $(obj)/stage0-prefixed.o \
-		$(patsubst %.o,%_xip.o,$(INITRAM_OBJ)) -o $(obj)/linuxbios.initram.o
-	$(Q)printf "  NM      $(subst $(shell pwd)/,,$(@))\n"
-	$(Q)$(NM) $(obj)/linuxbios.initram.o | sort -u > $(obj)/linuxbios.initram.map
-
Index: LinuxBIOSv3/mainboard/emulation/qemu-x86/Makefile
===================================================================
--- LinuxBIOSv3/mainboard/emulation/qemu-x86/Makefile	(Revision 527)
+++ LinuxBIOSv3/mainboard/emulation/qemu-x86/Makefile	(Arbeitskopie)
@@ -42,11 +42,3 @@
 
 INITRAM_OBJ = $(obj)/mainboard/$(MAINBOARDDIR)/initram.o
 
-$(obj)/linuxbios.initram.o $(obj)/linuxbios.initram.map: $(obj)/stage0.init $(obj)/stage0-prefixed.o $(patsubst %.o,%_xip.o,$(INITRAM_OBJ))
-	$(Q)# initram links against stage0
-	$(Q)printf "  LD      $(subst $(shell pwd)/,,$(@))\n"
-	$(Q)$(LD) -Ttext 0 --entry main -N -R $(obj)/stage0-prefixed.o \
-		$(patsubst %.o,%_xip.o,$(INITRAM_OBJ)) -o $(obj)/linuxbios.initram.o
-	$(Q)printf "  NM      $(subst $(shell pwd)/,,$(@))\n"
-	$(Q)$(NM) $(obj)/linuxbios.initram.o | sort -u > $(obj)/linuxbios.initram.map
-
Index: LinuxBIOSv3/arch/x86/Makefile
===================================================================
--- LinuxBIOSv3/arch/x86/Makefile	(Revision 527)
+++ LinuxBIOSv3/arch/x86/Makefile	(Arbeitskopie)
@@ -232,4 +232,12 @@
 	$(Q)printf "  AS      $(subst $(shell pwd)/,,$(@))\n"
 	$(Q)$(AS) $(obj)/arch/x86/stage0_asm.s -o $@
 
+$(obj)/linuxbios.initram.o $(obj)/linuxbios.initram.map: $(obj)/stage0.init $(obj)/stage0-prefixed.o $(patsubst %.o,%_xip.o,$(INITRAM_OBJ))
+	$(Q)# initram links against stage0
+	$(Q)printf "  LD      $(subst $(shell pwd)/,,$(@))\n"
+	$(Q)$(LD) -Ttext 0 --entry main -N -R $(obj)/stage0-prefixed.o \
+		$(patsubst %.o,%_xip.o,$(INITRAM_OBJ)) -o $(obj)/linuxbios.initram.o
+	$(Q)printf "  NM      $(subst $(shell pwd)/,,$(@))\n"
+	$(Q)$(NM) $(obj)/linuxbios.initram.o | sort -u > $(obj)/linuxbios.initram.map
+
 endif