[LinuxBIOS] [PATCH] Remove Bitworks IMS

[Gregg C Levine]

Hello!
Richard, would you be interested in a second opinion concerning a Bitworks
IMS board? And would you mind letting me know off-list of course? Also can
you advise me, in the same venue, what the motivation behind the boards was.

Let's just say I am curious about them.

--
Gregg C Levine hansolofalcon at worldnet.att.net
"The Force will be with you always." Obi-Wan Kenobi
  


> -----Original Message-----
> From: linuxbios-bounces at linuxbios.org
[mailto:linuxbios-bounces at linuxbios.org] On
> Behalf Of Richard Smith
> Sent: Wednesday, November 28, 2007 8:05 AM
> To: Al Boldi
> Cc: LinuxBIOS Mailing List
> Subject: Re: [LinuxBIOS] [PATCH] Remove Bitworks IMS
> 
> Al Boldi wrote:
> 
> > I may be able to help out here.  I have a GigaByte i440bx board with a
> > dual-bios. There are two physical non-socketed chips, but the fallback
logic
> > is software conntrolled.
> 
> Oh. I don't care about bricking. My boards have sockets and unbricking
> things is my specialty.  I got programmers, rework equipment, bla bla.
> 
> I just don't want to spend my time adding memory autodetection code if
> somebody already has it 90% there.
> 
> > Also, is there a tarball link to the sources?
> 
> http://snapshots.linuxbios.org/
> 
> --
> Richard A. Smith
> smithbone at gmail.com
> 
> 
> --
> linuxbios mailing list
> linuxbios at linuxbios.org
> http://www.linuxbios.org/mailman/listinfo/linuxbios