[LinuxBIOS] r533 - in LinuxBIOSv3/mainboard: adl/msm800sev artecgroup/dbe61 emulation/qemu-x86

[svn at openbios.org]

Author: hailfinger
Date: 2007-11-30 23:43:42 +0100 (Fri, 30 Nov 2007)
New Revision: 533

Modified:
   LinuxBIOSv3/mainboard/adl/msm800sev/Makefile
   LinuxBIOSv3/mainboard/artecgroup/dbe61/Makefile
   LinuxBIOSv3/mainboard/emulation/qemu-x86/Makefile
Log:
Reorder the rules in mainboard/*/*/Makefile so their order is identical
across all of these makefiles. The rules are now in order of execution
during boot, that is:
STAGE0_MAINBOARD_OBJ
INITRAM_OBJ
STAGE2_MAINBOARD_OBJ
As added benefit, mainboard makefiles are now almost identical.

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006 at gmx.net>
Acked-by: Stefan Reinauer <stepan at coresystems.de>


Modified: LinuxBIOSv3/mainboard/adl/msm800sev/Makefile
===================================================================
--- LinuxBIOSv3/mainboard/adl/msm800sev/Makefile	2007-11-29 01:23:08 UTC (rev 532)
+++ LinuxBIOSv3/mainboard/adl/msm800sev/Makefile	2007-11-30 22:43:42 UTC (rev 533)
@@ -21,14 +21,14 @@
 
 STAGE0_MAINBOARD_OBJ := $(obj)/mainboard/$(MAINBOARDDIR)/stage1.o
 
+INITRAM_OBJ =   $(obj)/mainboard/$(MAINBOARDDIR)/initram.o \
+		$(obj)/northbridge/amd/geodelx/raminit.o \
+		$(obj)/southbridge/amd/cs5536/smbus_initram.o \
+		$(obj)/arch/x86/geodelx/geodelx.o
+
 STAGE2_MAINBOARD_OBJ =
 
 $(obj)/linuxbios.vpd:
 	$(Q)printf "  BUILD   DUMMY VPD\n"
 	$(Q)dd if=/dev/zero of=$(obj)/linuxbios.vpd bs=256 count=1 $(SILENT)
 
-INITRAM_OBJ =   $(obj)/mainboard/$(MAINBOARDDIR)/initram.o \
-		$(obj)/northbridge/amd/geodelx/raminit.o \
-		$(obj)/southbridge/amd/cs5536/smbus_initram.o \
-		$(obj)/arch/x86/geodelx/geodelx.o
-

Modified: LinuxBIOSv3/mainboard/artecgroup/dbe61/Makefile
===================================================================
--- LinuxBIOSv3/mainboard/artecgroup/dbe61/Makefile	2007-11-29 01:23:08 UTC (rev 532)
+++ LinuxBIOSv3/mainboard/artecgroup/dbe61/Makefile	2007-11-30 22:43:42 UTC (rev 533)
@@ -21,12 +21,12 @@
 
 STAGE0_MAINBOARD_OBJ := $(obj)/mainboard/$(MAINBOARDDIR)/stage1.o
 
+INITRAM_OBJ =   $(obj)/mainboard/$(MAINBOARDDIR)/initram.o \
+		$(obj)/arch/x86/geodelx/geodelx.o
+
 STAGE2_MAINBOARD_OBJ = 
 
 $(obj)/linuxbios.vpd:
 	$(Q)printf "  BUILD   DUMMY VPD\n"
 	$(Q)dd if=/dev/zero of=$(obj)/linuxbios.vpd bs=256 count=1 $(SILENT)
 
-INITRAM_OBJ =   $(obj)/mainboard/$(MAINBOARDDIR)/initram.o \
-		$(obj)/arch/x86/geodelx/geodelx.o
-

Modified: LinuxBIOSv3/mainboard/emulation/qemu-x86/Makefile
===================================================================
--- LinuxBIOSv3/mainboard/emulation/qemu-x86/Makefile	2007-11-29 01:23:08 UTC (rev 532)
+++ LinuxBIOSv3/mainboard/emulation/qemu-x86/Makefile	2007-11-30 22:43:42 UTC (rev 533)
@@ -21,6 +21,15 @@
 
 STAGE0_MAINBOARD_OBJ := $(obj)/mainboard/$(MAINBOARDDIR)/stage1.o
 
+#
+# This is going to be the init RAM code.
+#
+# The initram file is always uncompressed. It belongs into the mainboard
+# directory and is built from what was auto.c in v2.
+#
+
+INITRAM_OBJ = $(obj)/mainboard/$(MAINBOARDDIR)/initram.o
+
 STAGE2_MAINBOARD_OBJ = vga.o
 
 #
@@ -33,12 +42,3 @@
 	$(Q)printf "  BUILD   DUMMY VPD\n"
 	$(Q)dd if=/dev/zero of=$(obj)/linuxbios.vpd bs=256 count=1 $(SILENT)
 
-#
-# This is going to be the init RAM code.
-#
-# The initram file is always uncompressed. It belongs into the mainboard
-# directory and is built from what was auto.c in v2.
-#
-
-INITRAM_OBJ = $(obj)/mainboard/$(MAINBOARDDIR)/initram.o
-