[LinuxBIOS] PCI-Bridge Problem - AMD Geode LX - PLX PCI6150
Uwe Hermann
uwe at hermann-uwe.de
Thu Sep 20 15:24:35 CEST 2007
On Thu, Sep 20, 2007 at 02:43:30PM +0200, Steffen D. wrote:
> Long mail below :)....
> >> Lspci -vvv also says "Interrupt: pin A routed to IRQ 0" (for the wifi
> >> card). Seems that it is the problem but what can i do now?
> >>
> >> More output from lspci -vvv (PCI2PCI-Bridge)
> >> -----------------------
> >> 00:0e.0 PCI bridge: Hint Corp HiNT HB4 PCI-PCI Bridge (PCI6150) (rev 04)
> >> (prog-if 00 [Normal decode])
> >>
> >
> > Could you send the corresponding lspci output from when booting the
> > factory BIOS?
> >
> Full "lspci -vvv" output:
> Orig. Bios: http://nopaste.php-quake.net/5046
> Linux-Bios: http://nopaste.php-quake.net/5047
No need for pastebins, just attach the full logs to your mails, it's
easier to review/inspect them that way.
Also, are you using the plain db800 target from v2 (latest svn
revision)? Did you make any modifications to the code? If so, please
send a patch with your modifications.
Thanks, Uwe.
--
http://www.hermann-uwe.de | http://www.holsham-traders.de
http://www.crazy-hacks.org | http://www.unmaintained-free-software.org
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 189 bytes
Desc: Digital signature
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20070920/a11865cd/attachment.sig>
More information about the coreboot
mailing list