[LinuxBIOS] badly initialized (?) pci bridge on the M57SLI (with irq table and mptable)

yhlu yinghailu at gmail.com
Fri Sep 21 18:33:01 CEST 2007


On 9/21/07, Uwe Hermann <uwe at hermann-uwe.de> wrote:
> On Wed, Sep 19, 2007 at 04:30:25PM -0700, yhlu wrote:
> > On 9/17/07, Uwe Hermann <uwe at hermann-uwe.de> wrote:
> > > On Mon, Sep 17, 2007 at 03:49:46PM -0700, yhlu wrote:
> > > > On 9/17/07, Ward Vandewege <ward at gnu.org> wrote:
> > > > > I've attached that boot log to this message.
> > > >
> > > > the one without any vga card installed?
> > > >
> > > > Can you post one with pcie display card installed and the one with pci
> > > > display card installed?
> > >
> > > This is for a different K8+MCP55 system, the MSI MS-7260 (K9N Neo), but
> > > maybe it's useful, too. I'm seeing similar issues with this board.
> > > Attached are various boot logs.
> >
> > with pci display in the slot, it hang in the emulator when executing
> > VGA option rom?
>
> Yes, but the question is whether this is a general problem of the
> emulator or whether this is caused by the PCI brokenness.
>
> I'll try to find a PCI VGA card which definately works in the
> emulator (I'll test on another LinuxBIOS-based board) and retry with
> that VGA card.

you may enable debug in emulator to check it try to install extra INT
handler....

YH




More information about the coreboot mailing list