[LinuxBIOS] Enabling APIC
corey.osgood at gmail.com
Fri Sep 21 23:29:07 CEST 2007
Rudolf Marek wrote:
> Thanks, I'll have a look at these tomorrow. For some reason, ACPI on my
>> system doesn't work (produces the error I had before) if the base is set
>> to 0x500, but it does work with 0x400 (the factory slot). Also, a quick
> Maybe you have something at 0x500, use the isadump -f 0x500 from
> lm-sensors package to find out.
Just realized thats where my smbus IO base is. I'll try moving things
around a bit, I don't even need smbus at the moment.
>> peak at your irq_tables.c tells me they're probably no good, the correct
>> IRQ router is 0x3227, not 0x596.
> Yep correct, I never tried those, I used MP table for the IRQ routing.
> You may try to use the MP table or the ACPI, all you need is to remove
> all PCI DEVS you dont have. I suppose you have VT8237 at 0:11.0 so you
> need to leave all lines with
Heh, I went ahead and dumped my mptable, even though this is a single
processor system. The mptable is for a supermicro P4DPE (with intel
e7500 chipset). Just one more reason factory bios's suck.
I'm having a bit of trouble with your acpi tables, they just don't seem
to work right on my board, so I'm working on patching up the factory
tables. Just out of curiosity, do you now have a device 10.5, which
linux detects as a network card? This is a USB direct device
comminucation device, but Linux seems to think it's a NIC, and I think
that trying to initialize it is what's hanging my system at the moment,
but I can't be sure.
More information about the coreboot