[coreboot] r215 - buildrom-devel/packages/mkelfimage
svn at coreboot.org
svn at coreboot.org
Wed Aug 6 23:03:48 CEST 2008
Author: ward
Date: 2008-08-06 23:03:47 +0200 (Wed, 06 Aug 2008)
New Revision: 215
Removed:
buildrom-devel/packages/mkelfimage/mkelfImage-2.7-x86_64.patch
buildrom-devel/packages/mkelfimage/mkelfimage-autoconf.patch
Modified:
buildrom-devel/packages/mkelfimage/mkelfimage.mk
Log:
The upstream for mkelfimage at lnxi has become somewhat unreliable. Reconfigure
buildrom to pull it from our svn tree, where we've had a copy for a while.
Signed-off-by: Ward Vandewege <ward at gnu.org>
Acked-by: Jordan Crouse <jordan.crouse at amd.com>
Deleted: buildrom-devel/packages/mkelfimage/mkelfImage-2.7-x86_64.patch
===================================================================
--- buildrom-devel/packages/mkelfimage/mkelfImage-2.7-x86_64.patch 2008-08-06 15:32:47 UTC (rev 214)
+++ buildrom-devel/packages/mkelfimage/mkelfImage-2.7-x86_64.patch 2008-08-06 21:03:47 UTC (rev 215)
@@ -1,563 +0,0 @@
-[PATCH] mkelfImage: Take elf64 vmlinux and produce elf32
-
-change to use e_entry instead of hardcode for vmlinux
-if e_entry is not equal to paddr of fist phdr, will use paddr instead, and not switch to 64bit in convert
-otherwise will use e_entry and switch to 64bit in convert
-
-also fix the bss_size calculation.
-
-Signed-off-By: Yinghai Lu <yinghai.lu at amd.com>
-
-diff -uNr mkelfImage-2.7/linux-i386/convert.h mkelfImage-2.7.new/linux-i386/convert.h
---- mkelfImage-2.7/linux-i386/convert.h 2006-03-17 06:08:21.000000000 -0800
-+++ mkelfImage-2.7.new/linux-i386/convert.h 2006-11-08 12:32:15.000000000 -0800
-@@ -3,6 +3,8 @@
- #define CONVERTLOC 0x10000
- #define REAL_MODE_DATA_LOC 0x20000
- #define GDTLOC 0x21000
-+#define GDT64LOC 0x22000
-+#define PGTLOC 0x23000
-
- #define DEFAULT_ROOT_DEV ((0x3<<8)| 0)
-
-@@ -18,10 +20,13 @@
- struct image_parameters {
- uint32_t convert_magic; /* a signature to verify mkelfImage was built properly */
- uint32_t gdt_size;
-+ uint32_t gdt64_size;
-+ uint32_t pgt_size;
- uint32_t bss_size;
- uint16_t ramdisk_flags;
- uint16_t root_dev;
- uint32_t entry;
-+ uint32_t switch_64;
- uint32_t initrd_start;
- uint32_t initrd_size;
- uint8_t cmdline[CMDLINE_MAX];
-diff -uNr mkelfImage-2.7/linux-i386/convert.lds mkelfImage-2.7.new/linux-i386/convert.lds
---- mkelfImage-2.7/linux-i386/convert.lds 2003-01-16 13:41:14.000000000 -0800
-+++ mkelfImage-2.7.new/linux-i386/convert.lds 2006-11-08 12:19:12.000000000 -0800
-@@ -27,7 +27,7 @@
- *(.bss)
- }
- _end = . ;
-- bss_size = _end - _bss;
-+ bss_sizex = _end - _bss;
-
- /DISCARD/ : {
- *(.comment)
-diff -uNr mkelfImage-2.7/linux-i386/head.S mkelfImage-2.7.new/linux-i386/head.S
---- mkelfImage-2.7/linux-i386/head.S 2003-01-24 14:48:03.000000000 -0800
-+++ mkelfImage-2.7.new/linux-i386/head.S 2006-11-08 12:19:32.000000000 -0800
-@@ -59,7 +59,7 @@
- movl $GDTLOC, %edi
- movl $(gdt_end - gdt), %ecx
- rep movsb
--
-+
- # Linux makes stupid assumptions about the segments
- # that are already setup, so setup a new gdt & ldt
- # and then reload the segment registers.
-@@ -95,22 +95,113 @@
- # Flag to indicate we are the bootstrap processor
- xorl %ebx, %ebx
-
-+ movl switch_64, %eax
-+ cmp $1, %eax
-+ jz switch_to_64
-+
- # Clear the unspecified registers for good measure
- xorl %eax, %eax
- xorl %ecx, %ecx
- xorl %edx, %edx
- xorl %edi, %edi
-- xorl %esp, %esp
- xorl %ebp, %ebp
-+
-+ # do not clear esp, we still need to use lret later
-+
-+ pushl $PROT_CODE_SEG
-+ movl entry, %eax
-+ pushl %eax
-+
-+ lret
-+
-+switch_to_64:
-+
-+ /* We need to switch to 64bit before use startup_64 entry go to kernel */
-+ /*
-+ * Prepare for entering 64 bit mode
-+ */
-+ # Move the gdt64 where Linux will not smash it during decompression
-+ movl %esi, %eax # save the real mode pointer
-+ movl $gdt64, %esi
-+ movl $GDT64LOC, %edi
-+ movl $(gdt64_end - gdt64), %ecx
-+ rep movsb
-+ movl %eax, %esi
-+
-+ /* Load new GDT with the 64bit segments using 32bit descriptor */
-+ lgdt gdt64
-+
-+ /* Enable PAE mode */
-+ xorl %eax, %eax
-+ btsl $5, %eax
-+ movl %eax, %cr4
-+
-+ /*
-+ * Build early 4G boot pagetable
-+ */
-+ /* Initialize Page tables to 0*/
-+ movl $PGTLOC, %edi
-+ xorl %eax, %eax
-+ movl $((4096*6)/4), %ecx
-+ rep stosl
-+
-+ /* Build Level 4 */
-+ movl $(PGTLOC + 0), %edi
-+ leal 0x1007 (%edi), %eax
-+ movl %eax, 0(%edi)
-+
-+ /* Build Level 3 */
-+ movl $(PGTLOC + 0x1000), %edi
-+ leal 0x1007(%edi), %eax
-+ movl $4, %ecx
-+1: movl %eax, 0x00(%edi)
-+ addl $0x00001000, %eax
-+ addl $8, %edi
-+ decl %ecx
-+ jnz 1b
-+
-+ /* Build Level 2 */
-+ movl $(PGTLOC + 0x2000), %edi
-+ movl $0x00000183, %eax
-+ movl $2048, %ecx
-+1: movl %eax, 0(%edi)
-+ addl $0x00200000, %eax
-+ addl $8, %edi
-+ decl %ecx
-+ jnz 1b
-+
-+ /* Enable the boot page tables */
-+ movl $PGTLOC, %eax
-+ movl %eax, %cr3
-+
-+ /* Enable Long mode in EFER (Extended Feature Enable Register) */
-+ movl $0xc0000080, %ecx
-+ rdmsr
-+ btsl $8, %eax
-+ wrmsr
-+
-+ /* Preparing for 64bit jmp */
-+ pushl $PROT_CODE_SEG
-+ movl entry, %eax
-+ pushl %eax
-+
-+ /* Enter paged protected Mode, activating Long Mode */
-+ xorl %eax, %eax
-+ btsl $31, %eax
-+ btsl $0, %eax
-+ movl %eax, %cr0
-+
-+ /*
-+ * At this point we're in long mode but in 32bit compatibility mode
-+ * with EFER.LME = 1, CS.L = 0, CS.D = 1 (and in turn
-+ * EFER.LMA = 1). Now we want to jump in 64bit mode, to do that we use
-+ * the new gdt/idt that has __KERNEL_CS with CS.L = 1.
-+ */
-
--
-- # Jump to the linux kernel
-- ljmp $ PROT_CODE_SEG , $ 0x100000
-+ lret
-
-
- /* Routines to query the BIOS... */
--
--
- /**************************************************************************
- E820_MEMSIZE - Get a listing of memory regions
- **************************************************************************/
-@@ -409,6 +500,7 @@
- .word 0x9200 # data read/write
- .word 0x00CF # granularity = 4096, 386
- # (+5th nibble of limit)
-+
- /*
- * The layout of the per-CPU GDT under Linux:
- *
-@@ -446,7 +538,14 @@
- */
- gdt_end:
-
--
-+gdt64:
-+ .word gdt64_end - gdt64
-+ .long GDT64LOC
-+ .word 0
-+ .quad 0x0000000000000000 /* NULL descriptor */
-+ .quad 0x00af9a000000ffff /* __KERNEL_CS */
-+ .quad 0x00cf92000000ffff /* __KERNEL_DS */
-+gdt64_end:
-
- .section ".trailer", "a"
- /* Constants set at build time, these are at the very end of my image */
-@@ -458,14 +557,20 @@
- .long CONVERT_MAGIC
- gdt_size:
- .long gdt_end - gdt
-+gdt64_size:
-+ .long gdt64_end - gdt64
-+pgt_size:
-+ .long 4096*6
- bss_size:
-- .long bss_size
-+ .long bss_sizex
- ramdisk_flags:
- .word 0
- root_dev:
- .word DEFAULT_ROOT_DEV
- entry:
- .long 0
-+switch_64:
-+ .long 0
- initrd_start:
- .long 0
- initrd_size:
-diff -uNr mkelfImage-2.7/linux-i386/mkelf-linux-i386.c mkelfImage-2.7.new/linux-i386/mkelf-linux-i386.c
---- mkelfImage-2.7/linux-i386/mkelf-linux-i386.c 2006-03-17 06:08:22.000000000 -0800
-+++ mkelfImage-2.7.new/linux-i386/mkelf-linux-i386.c 2006-11-08 09:54:58.000000000 -0800
-@@ -19,13 +19,16 @@
- static void (*parse_kernel_type)(struct kernel_info *info, char *kernel_buf, size_t kernel_size);
- static void parse_bzImage_kernel(struct kernel_info *info, char *kernel_buf, size_t kernel_size);
- static void parse_elf32_kernel(struct kernel_info *info, char *kernel_buf, size_t kernel_size);
-+static void parse_elf64_kernel(struct kernel_info *info, char *kernel_buf, size_t kernel_size);
-+
-+char *vmlinux_x86_64_probe(char *kernel_buf, off_t kernel_size);
-
- char *vmlinux_i386_probe(char *kernel_buf, off_t kernel_size)
- {
- Elf32_Ehdr *ehdr;
- Elf32_Phdr *phdr;
- int i;
-- int hdr1, hdr2;
-+ int phdrs;
- ehdr = (Elf32_Ehdr *)kernel_buf;
- if (
- (ehdr->e_ident[EI_MAG0] != ELFMAG0) ||
-@@ -35,7 +38,8 @@
- return "No ELF signature found on kernel\n";
- }
- if (ehdr->e_ident[EI_CLASS] != ELFCLASS32) {
-- return "Not a 32bit ELF kernel\n";
-+ return vmlinux_x86_64_probe(kernel_buf, kernel_size);
-+// return "Not a 32bit ELF kernel\n";
- }
- if (ehdr->e_ident[EI_DATA] != ELFDATA2LSB) {
- return "Not a little endian ELF kernel\n";
-@@ -54,27 +58,64 @@
- return "Kernel uses bad program header size.\n";
- }
- phdr = (Elf32_Phdr *)(kernel_buf + le32_to_cpu(ehdr->e_phoff));
-- hdr1 = hdr2 = -1;
-- for(i = 0; i < le32_to_cpu(ehdr->e_phnum); i++) {
-+ phdrs = 0;
-+ for(i = 0; i < le16_to_cpu(ehdr->e_phnum); i++) {
- if (le32_to_cpu(phdr[i].p_type) != PT_LOAD)
- continue;
-- if (((hdr1 != -1) &&
-- ((le32_to_cpu(phdr[hdr1].p_paddr) & 0xfffffff) != 0x100000)) ||
-- (hdr2 != -1)) {
-- return "Too many PT_LOAD segments to be a linux kernel\n";
-- }
-- if (hdr1 == -1) {
-- hdr1 = i;
-- } else {
-- hdr2 = i;
-- }
-+ phdrs++;
- }
-- if (hdr1 == -1) {
-+ if (phdrs == 0) {
- return "No PT_LOAD segments!\n";
- }
- parse_kernel_type = parse_elf32_kernel;
- return 0;
- }
-+char *vmlinux_x86_64_probe(char *kernel_buf, off_t kernel_size)
-+{
-+ Elf64_Ehdr *ehdr;
-+ Elf64_Phdr *phdr;
-+ int i;
-+ int phdrs = 0;
-+ ehdr = (Elf64_Ehdr *)kernel_buf;
-+ if (
-+ (ehdr->e_ident[EI_MAG0] != ELFMAG0) ||
-+ (ehdr->e_ident[EI_MAG1] != ELFMAG1) ||
-+ (ehdr->e_ident[EI_MAG2] != ELFMAG2) ||
-+ (ehdr->e_ident[EI_MAG3] != ELFMAG3)) {
-+ return "No ELF signature found on kernel\n";
-+ }
-+ if (ehdr->e_ident[EI_CLASS] != ELFCLASS64) {
-+ return "Not a 64bit ELF kernel\n";
-+ }
-+ if (ehdr->e_ident[EI_DATA] != ELFDATA2LSB) {
-+ return "Not a little endian ELF kernel\n";
-+ }
-+ if (le16_to_cpu(ehdr->e_type) != ET_EXEC) {
-+ return "Not an executable kernel\n";
-+ }
-+ if (le16_to_cpu(ehdr->e_machine) != EM_X86_64) {
-+ return "Not an x86_64 kernel\n";
-+ }
-+ if ( (ehdr->e_ident[EI_VERSION] != EV_CURRENT) ||
-+ (le32_to_cpu(ehdr->e_version) != EV_CURRENT)) {
-+ return "Kernel not using ELF version 1.\n";
-+ }
-+ if (le16_to_cpu(ehdr->e_phentsize) != sizeof(*phdr)) {
-+ return "Kernel uses bad program header size.\n";
-+ }
-+ phdr = (Elf64_Phdr *)(kernel_buf + le64_to_cpu(ehdr->e_phoff));
-+ phdrs = 0;
-+ for(i = 0; i < le16_to_cpu(ehdr->e_phnum); i++) {
-+ if (le32_to_cpu(phdr[i].p_type) != PT_LOAD)
-+ continue;
-+ phdrs++;
-+ }
-+ if (phdrs == 0) {
-+ return "No PT_LOAD segments!\n";
-+ }
-+ parse_kernel_type = parse_elf64_kernel;
-+ return 0;
-+}
-
- char *bzImage_i386_probe(char *kernel_buf, off_t kernel_size)
- {
-@@ -118,17 +159,14 @@
-
- struct kernel_info
- {
-- void *kernel;
-- size_t filesz;
-- size_t memsz;
-- size_t paddr;
-- size_t vaddr;
-- void *kernel2;
-- size_t filesz2;
-- size_t memsz2;
-- size_t paddr2;
-- size_t vaddr2;
-+ int phdrs;
-+ void *kernel[4];
-+ size_t filesz[4];
-+ size_t memsz[4];
-+ size_t paddr[4];
-+ size_t vaddr[4];
- size_t entry;
-+ size_t switch_64;
- char *version;
- };
-
-@@ -137,43 +175,68 @@
- Elf32_Ehdr *ehdr;
- Elf32_Phdr *phdr;
- int i;
-- int hdr1, hdr2;
-+ int phdrs;
- ehdr = (Elf32_Ehdr *)kernel_buf;
- phdr = (Elf32_Phdr *)(kernel_buf + ehdr->e_phoff);
-- hdr1 = hdr2 = -1;
-+ phdrs = 0;
- for(i = 0; i < le16_to_cpu(ehdr->e_phnum); i++) {
- if (le32_to_cpu(phdr[i].p_type) != PT_LOAD)
- continue;
-- if (hdr2 != -1) {
-- die("Too many PT_LOAD segments to be a linux kernel\n");
-- }
-- if (hdr1 == -1) {
-- hdr1 = i;
-- } else {
-- hdr2 = i;
-- }
-- }
-- if (hdr1 == -1) {
-- die("No PT_LOAD segments!\n");
-+ info->kernel[phdrs] = kernel_buf + le32_to_cpu(phdr[i].p_offset);
-+ info->filesz[phdrs] = le32_to_cpu(phdr[i].p_filesz);
-+ info->memsz[phdrs] = le32_to_cpu(phdr[i].p_memsz);
-+ info->paddr[phdrs] = le32_to_cpu(phdr[i].p_paddr) & 0xfffffff;
-+ info->vaddr[phdrs] = le32_to_cpu(phdr[i].p_vaddr);
-+ phdrs++;
- }
-- info->kernel = kernel_buf + le32_to_cpu(phdr[hdr1].p_offset);
-- info->filesz = le32_to_cpu(phdr[hdr1].p_filesz);
-- info->memsz = le32_to_cpu(phdr[hdr1].p_memsz);
-- info->paddr = le32_to_cpu(phdr[hdr1].p_paddr) & 0xfffffff;
-- info->vaddr = le32_to_cpu(phdr[hdr1].p_vaddr);
--
-- if (hdr2 != -1) {
-- info->kernel2 = kernel_buf + le32_to_cpu(phdr[hdr2].p_offset);
-- info->filesz2 = le32_to_cpu(phdr[hdr2].p_filesz);
-- info->memsz2 = le32_to_cpu(phdr[hdr2].p_memsz);
-- info->paddr2 = le32_to_cpu(phdr[hdr2].p_paddr) & 0xfffffff;
-- info->vaddr2 = le32_to_cpu(phdr[hdr2].p_vaddr);
-+
-+ if(!phdrs)
-+ die("We need at least one phdr\n");
-+
-+ info->phdrs = phdrs;
-+ info->entry = le32_to_cpu(ehdr->e_entry);
-+ info->switch_64 = 0; //not convert from elf64
-+ info->version = "unknown";
-+}
-+
-+static void parse_elf64_kernel(struct kernel_info *info, char *kernel_buf, size_t kernel_size)
-+{
-+ Elf64_Ehdr *ehdr;
-+ Elf64_Phdr *phdr;
-+ int i;
-+ int phdrs;
-+ ehdr = (Elf64_Ehdr *)kernel_buf;
-+ phdr = (Elf64_Phdr *)(kernel_buf + le64_to_cpu(ehdr->e_phoff));
-+
-+ phdrs = 0;
-+ for(i = 0; i < le16_to_cpu(ehdr->e_phnum); i++) {
-+ if (le32_to_cpu(phdr[i].p_type) != PT_LOAD)
-+ continue;
-+ info->kernel[phdrs] = kernel_buf + le64_to_cpu(phdr[i].p_offset);
-+ info->filesz[phdrs] = le64_to_cpu(phdr[i].p_filesz);
-+ info->memsz[phdrs] = le64_to_cpu(phdr[i].p_memsz);
-+ info->paddr[phdrs] = le64_to_cpu(phdr[i].p_paddr) & 0xffffff;
-+ info->vaddr[phdrs] = le64_to_cpu(phdr[i].p_vaddr);
-+ phdrs++;
- }
-+
-+ if(!phdrs)
-+ die("We need at least one phdr\n");
-
-- info->entry = 0x100000;
-- info->version = "unknown";
-+ info->phdrs = phdrs;
-+ info->entry = le64_to_cpu(ehdr->e_entry);
-+#if 0
-+ if (info->entry != info->paddr[0]) {
-+ info->entry = info->paddr[0]; // we still have startup_32 there
-+ info->switch_64 = 0; //not convert from elf64
-+ } else
-+#endif
-+ info->switch_64 = 1; //convert from elf64
-+
-+ info->version = "unknown";
- }
-
-+
- static void parse_bzImage_kernel(struct kernel_info *info, char *kernel_buf, size_t kernel_size)
- {
- struct x86_linux_header *hdr;
-@@ -186,12 +249,14 @@
- }
- offset = 512 + (512 *setup_sects);
-
-- info->kernel = kernel_buf + offset;
-- info->filesz = kernel_size - offset;
-- info->memsz = 0x700000;
-- info->paddr = 0x100000;
-- info->vaddr = 0x100000;
-- info->entry = info->paddr;
-+ info->kernel[0] = kernel_buf + offset;
-+ info->filesz[0] = kernel_size - offset;
-+ info->memsz[0] = 0x700000;
-+ info->paddr[0] = 0x100000;
-+ info->vaddr[0] = 0x100000;
-+ info->phdrs = 1;
-+ info->entry = info->paddr[0];
-+ info->switch_64 = 0; //not convert from elf64, even later bzImage become elf64, it still includes startup_32
- info->version = kernel_buf + 512 + le16_to_cpu(hdr->kver_addr);
- }
-
-@@ -237,6 +302,7 @@
- struct kernel_info kinfo;
- struct image_parameters *params;
- int index;
-+ int i;
-
- int opt;
- static const struct option options[] = {
-@@ -310,7 +376,7 @@
-
- /* Add a program header for the note section */
- index = 4;
-- index += kinfo.kernel2 ? 1:0;
-+ index += (kinfo.phdrs - 1);
- index += ramdisk_size ? 1:0;
- phdr = add_program_headers(ehdr, index);
-
-@@ -328,23 +394,24 @@
- phdr[2].p_paddr = REAL_MODE_DATA_LOC;
- phdr[2].p_vaddr = REAL_MODE_DATA_LOC;
- phdr[2].p_filesz = 0;
-- phdr[2].p_memsz = (GDTLOC - REAL_MODE_DATA_LOC) + params->gdt_size;
-+ if(!kinfo.switch_64)
-+ phdr[2].p_memsz = (GDTLOC - REAL_MODE_DATA_LOC) + params->gdt_size;
-+ else
-+ phdr[2].p_memsz = (PGTLOC - REAL_MODE_DATA_LOC) + params->pgt_size;
- phdr[2].p_data = 0;
-
-- phdr[3].p_paddr = kinfo.paddr;
-- phdr[3].p_vaddr = kinfo.vaddr;
-- phdr[3].p_filesz = kinfo.filesz;
-- phdr[3].p_memsz = kinfo.memsz;
-- phdr[3].p_data = kinfo.kernel;
-+ if( (phdr[1].p_paddr + phdr[1].p_memsz) > phdr[2].p_paddr) {
-+ die("Internal error: need to increase REAL_MODE_DATA_LOC !\n");
-+ }
-
-- index = 4;
-+ index = 3;
- /* Put the second kernel frament if present */
-- if (kinfo.kernel2) {
-- phdr[index].p_paddr = kinfo.paddr2;
-- phdr[index].p_vaddr = kinfo.vaddr2;
-- phdr[index].p_filesz = kinfo.filesz2;
-- phdr[index].p_memsz = kinfo.memsz2;
-- phdr[index].p_data = kinfo.kernel2;
-+ for(i=0;i<kinfo.phdrs;i++) {
-+ phdr[index].p_paddr = kinfo.paddr[i];
-+ phdr[index].p_vaddr = kinfo.vaddr[i];
-+ phdr[index].p_filesz = kinfo.filesz[i];
-+ phdr[index].p_memsz = kinfo.memsz[i];
-+ phdr[index].p_data = kinfo.kernel[i];
- index++;
- }
-
-@@ -352,6 +419,10 @@
- */
- params->initrd_start = params->initrd_size = 0;
- if (ramdisk_size) {
-+ if( (phdr[index-1].p_paddr + phdr[index-1].p_memsz) > ramdisk_base) {
-+ die("need to increase increase ramdisk_base !\n");
-+ }
-+
- phdr[index].p_paddr = ramdisk_base;
- phdr[index].p_vaddr = ramdisk_base;
- phdr[index].p_filesz = ramdisk_size;
-@@ -364,6 +435,7 @@
-
- /* Set the start location */
- params->entry = kinfo.entry;
-+ params->switch_64 = kinfo.switch_64;
- ehdr->e_entry = phdr[1].p_paddr;
-
- /* Setup the elf notes */
-diff -uNr mkelfImage-2.7/linux-ia64/mkelf-linux-ia64.c mkelfImage-2.7.new/linux-ia64/mkelf-linux-ia64.c
---- mkelfImage-2.7/linux-ia64/mkelf-linux-ia64.c 2006-03-17 10:09:16.000000000 -0800
-+++ mkelfImage-2.7.new/linux-ia64/mkelf-linux-ia64.c 2006-11-07 18:14:27.000000000 -0800
-@@ -81,7 +81,7 @@
- phdr = (Elf64_Phdr *)(kernel_buf + le64_to_cpu(ehdr->e_phoff));
- phdrs = 0;
- for(i = 0; i < le16_to_cpu(ehdr->e_phnum); i++) {
-- if (le16_to_cpu(phdr[i].p_type) != PT_LOAD)
-+ if (le32_to_cpu(phdr[i].p_type) != PT_LOAD)
- continue;
- phdrs++;
- }
Deleted: buildrom-devel/packages/mkelfimage/mkelfimage-autoconf.patch
===================================================================
--- buildrom-devel/packages/mkelfimage/mkelfimage-autoconf.patch 2008-08-06 15:32:47 UTC (rev 214)
+++ buildrom-devel/packages/mkelfimage/mkelfimage-autoconf.patch 2008-08-06 21:03:47 UTC (rev 215)
@@ -1,6640 +0,0 @@
-Index: mkelfImage-2.7/configure.ac
-===================================================================
---- mkelfImage-2.7.orig/configure.ac 2006-03-27 16:44:59.000000000 -0700
-+++ mkelfImage-2.7/configure.ac 2007-12-07 12:14:15.000000000 -0700
-@@ -173,15 +173,15 @@
- dnl ---Output variables...
-
- HOST_CC=$CC
--HOST_CFLAGS='-O2 -Wall $(HOST_CPPFLAGS)'
-+HOST_CFLAGS="$HOST_CFLAGS -O2 -Wall \$(HOST_CPPFLAGS)"
-
- dnl TODO: figure out how to set these appropriately for compilers other than gcc
--I386_CFLAGS='-Os -ffreestanding -Wall -W -Wno-format $(I386_CPPFLAGS)'
-+I386_CFLAGS="$I386_CFLAGS -Os -ffreestanding -Wall -W -Wno-format \$(I386_CPPFLAGS)"
- I386_ASFLAGS=''
- I386_LDFLAGS='-static --warn-multiple-gp --warn-common'
-
- dnl TODO: figure out how to set these appropriately for compilers other than gcc
--IA64_CFLAGS='-Os -ffreestanding -Wall -W -Wno-format -fpic -mconstant-gp -mauto-pic -fno-unwind-tables $(IA64_CPPFLAGS)'
-+IA64_CFLAGS="$IA64_CFLAGS -Os -ffreestanding -Wall -W -Wno-format -fpic -mconstant-gp -mauto-pic -fno-unwind-tables \$(IA64_CPPFLAGS)"
- IA64_ASFLAGS='-mconstant-gp -mauto-pic'
- IA64_LDFLAGS='-static --warn-multiple-gp --warn-common'
-
-Index: mkelfImage-2.7/configure
-===================================================================
---- mkelfImage-2.7.orig/configure 2007-12-07 12:14:18.000000000 -0700
-+++ mkelfImage-2.7/configure 2007-12-07 12:14:21.000000000 -0700
-@@ -1,25 +1,54 @@
- #! /bin/sh
- # Guess values for system-dependent variables and create Makefiles.
--# Generated by GNU Autoconf 2.59.
-+# Generated by GNU Autoconf 2.61.
- #
--# Copyright (C) 2003 Free Software Foundation, Inc.
-+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-+# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
- # This configure script is free software; the Free Software Foundation
- # gives unlimited permission to copy, distribute and modify it.
- ## --------------------- ##
- ## M4sh Initialization. ##
- ## --------------------- ##
-
--# Be Bourne compatible
-+# Be more Bourne compatible
-+DUALCASE=1; export DUALCASE # for MKS sh
- if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
--elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
-- set -o posix
-+ setopt NO_GLOB_SUBST
-+else
-+ case `(set -o) 2>/dev/null` in
-+ *posix*) set -o posix ;;
-+esac
-+
-+fi
-+
-+
-+
-+
-+# PATH needs CR
-+# Avoid depending upon Character Ranges.
-+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-+as_cr_digits='0123456789'
-+as_cr_alnum=$as_cr_Letters$as_cr_digits
-+
-+# The user is always right.
-+if test "${PATH_SEPARATOR+set}" != set; then
-+ echo "#! /bin/sh" >conf$$.sh
-+ echo "exit 0" >>conf$$.sh
-+ chmod +x conf$$.sh
-+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-+ PATH_SEPARATOR=';'
-+ else
-+ PATH_SEPARATOR=:
-+ fi
-+ rm -f conf$$.sh
- fi
--DUALCASE=1; export DUALCASE # for MKS sh
-
- # Support unset when possible.
- if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
-@@ -29,8 +58,43 @@
- fi
-
-
-+# IFS
-+# We need space, tab and new line, in precisely that order. Quoting is
-+# there to prevent editors from complaining about space-tab.
-+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-+# splitting by setting IFS to empty value.)
-+as_nl='
-+'
-+IFS=" "" $as_nl"
-+
-+# Find who we are. Look in the path if we contain no directory separator.
-+case $0 in
-+ *[\\/]* ) as_myself=$0 ;;
-+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-+done
-+IFS=$as_save_IFS
-+
-+ ;;
-+esac
-+# We did not find ourselves, most probably we were run as `sh COMMAND'
-+# in which case we are not to be found in the path.
-+if test "x$as_myself" = x; then
-+ as_myself=$0
-+fi
-+if test ! -f "$as_myself"; then
-+ echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
-+ { (exit 1); exit 1; }
-+fi
-+
- # Work around bugs in pre-3.0 UWIN ksh.
--$as_unset ENV MAIL MAILPATH
-+for as_var in ENV MAIL MAILPATH
-+do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-+done
- PS1='$ '
- PS2='> '
- PS4='+ '
-@@ -44,18 +108,19 @@
- if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
- eval $as_var=C; export $as_var
- else
-- $as_unset $as_var
-+ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
- fi
- done
-
- # Required to use basename.
--if expr a : '\(a\)' >/dev/null 2>&1; then
-+if expr a : '\(a\)' >/dev/null 2>&1 &&
-+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
- else
- as_expr=false
- fi
-
--if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
-+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
- as_basename=basename
- else
- as_basename=false
-@@ -63,157 +128,388 @@
-
-
- # Name of the executable.
--as_me=`$as_basename "$0" ||
-+as_me=`$as_basename -- "$0" ||
- $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
- X"$0" : 'X\(//\)$' \| \
-- X"$0" : 'X\(/\)$' \| \
-- . : '\(.\)' 2>/dev/null ||
-+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
- echo X/"$0" |
-- sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
-- /^X\/\(\/\/\)$/{ s//\1/; q; }
-- /^X\/\(\/\).*/{ s//\1/; q; }
-- s/.*/./; q'`
-+ sed '/^.*\/\([^/][^/]*\)\/*$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\/\(\/\/\)$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\/\(\/\).*/{
-+ s//\1/
-+ q
-+ }
-+ s/.*/./; q'`
-
-+# CDPATH.
-+$as_unset CDPATH
-
--# PATH needs CR, and LINENO needs CR and PATH.
--# Avoid depending upon Character Ranges.
--as_cr_letters='abcdefghijklmnopqrstuvwxyz'
--as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
--as_cr_Letters=$as_cr_letters$as_cr_LETTERS
--as_cr_digits='0123456789'
--as_cr_alnum=$as_cr_Letters$as_cr_digits
-
--# The user is always right.
--if test "${PATH_SEPARATOR+set}" != set; then
-- echo "#! /bin/sh" >conf$$.sh
-- echo "exit 0" >>conf$$.sh
-- chmod +x conf$$.sh
-- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-- PATH_SEPARATOR=';'
-- else
-- PATH_SEPARATOR=:
-- fi
-- rm -f conf$$.sh
-+if test "x$CONFIG_SHELL" = x; then
-+ if (eval ":") 2>/dev/null; then
-+ as_have_required=yes
-+else
-+ as_have_required=no
-+fi
-+
-+ if test $as_have_required = yes && (eval ":
-+(as_func_return () {
-+ (exit \$1)
-+}
-+as_func_success () {
-+ as_func_return 0
-+}
-+as_func_failure () {
-+ as_func_return 1
-+}
-+as_func_ret_success () {
-+ return 0
-+}
-+as_func_ret_failure () {
-+ return 1
-+}
-+
-+exitcode=0
-+if as_func_success; then
-+ :
-+else
-+ exitcode=1
-+ echo as_func_success failed.
- fi
-
-+if as_func_failure; then
-+ exitcode=1
-+ echo as_func_failure succeeded.
-+fi
-
-- as_lineno_1=$LINENO
-- as_lineno_2=$LINENO
-- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-- test "x$as_lineno_1" != "x$as_lineno_2" &&
-- test "x$as_lineno_3" = "x$as_lineno_2" || {
-- # Find who we are. Look in the path if we contain no path at all
-- # relative or not.
-- case $0 in
-- *[\\/]* ) as_myself=$0 ;;
-- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
--for as_dir in $PATH
--do
-- IFS=$as_save_IFS
-- test -z "$as_dir" && as_dir=.
-- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
--done
-+if as_func_ret_success; then
-+ :
-+else
-+ exitcode=1
-+ echo as_func_ret_success failed.
-+fi
-
-- ;;
-- esac
-- # We did not find ourselves, most probably we were run as `sh COMMAND'
-- # in which case we are not to be found in the path.
-- if test "x$as_myself" = x; then
-- as_myself=$0
-- fi
-- if test ! -f "$as_myself"; then
-- { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2
-- { (exit 1); exit 1; }; }
-- fi
-- case $CONFIG_SHELL in
-- '')
-+if as_func_ret_failure; then
-+ exitcode=1
-+ echo as_func_ret_failure succeeded.
-+fi
-+
-+if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
-+ :
-+else
-+ exitcode=1
-+ echo positional parameters were not saved.
-+fi
-+
-+test \$exitcode = 0) || { (exit 1); exit 1; }
-+
-+(
-+ as_lineno_1=\$LINENO
-+ as_lineno_2=\$LINENO
-+ test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" &&
-+ test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; }
-+") 2> /dev/null; then
-+ :
-+else
-+ as_candidate_shells=
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
- for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
- do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
-- for as_base in sh bash ksh sh5; do
-- case $as_dir in
-+ case $as_dir in
- /*)
-- if ("$as_dir/$as_base" -c '
-+ for as_base in sh bash ksh sh5; do
-+ as_candidate_shells="$as_candidate_shells $as_dir/$as_base"
-+ done;;
-+ esac
-+done
-+IFS=$as_save_IFS
-+
-+
-+ for as_shell in $as_candidate_shells $SHELL; do
-+ # Try only shells that exist, to save several forks.
-+ if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
-+ { ("$as_shell") 2> /dev/null <<\_ASEOF
-+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-+ emulate sh
-+ NULLCMD=:
-+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-+ # is contrary to our usage. Disable this feature.
-+ alias -g '${1+"$@"}'='"$@"'
-+ setopt NO_GLOB_SUBST
-+else
-+ case `(set -o) 2>/dev/null` in
-+ *posix*) set -o posix ;;
-+esac
-+
-+fi
-+
-+
-+:
-+_ASEOF
-+}; then
-+ CONFIG_SHELL=$as_shell
-+ as_have_required=yes
-+ if { "$as_shell" 2> /dev/null <<\_ASEOF
-+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-+ emulate sh
-+ NULLCMD=:
-+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-+ # is contrary to our usage. Disable this feature.
-+ alias -g '${1+"$@"}'='"$@"'
-+ setopt NO_GLOB_SUBST
-+else
-+ case `(set -o) 2>/dev/null` in
-+ *posix*) set -o posix ;;
-+esac
-+
-+fi
-+
-+
-+:
-+(as_func_return () {
-+ (exit $1)
-+}
-+as_func_success () {
-+ as_func_return 0
-+}
-+as_func_failure () {
-+ as_func_return 1
-+}
-+as_func_ret_success () {
-+ return 0
-+}
-+as_func_ret_failure () {
-+ return 1
-+}
-+
-+exitcode=0
-+if as_func_success; then
-+ :
-+else
-+ exitcode=1
-+ echo as_func_success failed.
-+fi
-+
-+if as_func_failure; then
-+ exitcode=1
-+ echo as_func_failure succeeded.
-+fi
-+
-+if as_func_ret_success; then
-+ :
-+else
-+ exitcode=1
-+ echo as_func_ret_success failed.
-+fi
-+
-+if as_func_ret_failure; then
-+ exitcode=1
-+ echo as_func_ret_failure succeeded.
-+fi
-+
-+if ( set x; as_func_ret_success y && test x = "$1" ); then
-+ :
-+else
-+ exitcode=1
-+ echo positional parameters were not saved.
-+fi
-+
-+test $exitcode = 0) || { (exit 1); exit 1; }
-+
-+(
- as_lineno_1=$LINENO
- as_lineno_2=$LINENO
-- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
- test "x$as_lineno_1" != "x$as_lineno_2" &&
-- test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
-- $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
-- $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
-- CONFIG_SHELL=$as_dir/$as_base
-- export CONFIG_SHELL
-- exec "$CONFIG_SHELL" "$0" ${1+"$@"}
-- fi;;
-- esac
-- done
--done
--;;
-- esac
-+ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; }
-+
-+_ASEOF
-+}; then
-+ break
-+fi
-+
-+fi
-+
-+ done
-+
-+ if test "x$CONFIG_SHELL" != x; then
-+ for as_var in BASH_ENV ENV
-+ do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-+ done
-+ export CONFIG_SHELL
-+ exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
-+fi
-+
-+
-+ if test $as_have_required = no; then
-+ echo This script requires a shell more modern than all the
-+ echo shells that I found on your system. Please install a
-+ echo modern shell, or manually run the script under such a
-+ echo shell if you do have one.
-+ { (exit 1); exit 1; }
-+fi
-+
-+
-+fi
-+
-+fi
-+
-+
-+
-+(eval "as_func_return () {
-+ (exit \$1)
-+}
-+as_func_success () {
-+ as_func_return 0
-+}
-+as_func_failure () {
-+ as_func_return 1
-+}
-+as_func_ret_success () {
-+ return 0
-+}
-+as_func_ret_failure () {
-+ return 1
-+}
-+
-+exitcode=0
-+if as_func_success; then
-+ :
-+else
-+ exitcode=1
-+ echo as_func_success failed.
-+fi
-+
-+if as_func_failure; then
-+ exitcode=1
-+ echo as_func_failure succeeded.
-+fi
-+
-+if as_func_ret_success; then
-+ :
-+else
-+ exitcode=1
-+ echo as_func_ret_success failed.
-+fi
-+
-+if as_func_ret_failure; then
-+ exitcode=1
-+ echo as_func_ret_failure succeeded.
-+fi
-+
-+if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
-+ :
-+else
-+ exitcode=1
-+ echo positional parameters were not saved.
-+fi
-+
-+test \$exitcode = 0") || {
-+ echo No shell found that supports shell functions.
-+ echo Please tell autoconf at gnu.org about your system,
-+ echo including any error possibly output before this
-+ echo message
-+}
-+
-+
-+
-+ as_lineno_1=$LINENO
-+ as_lineno_2=$LINENO
-+ test "x$as_lineno_1" != "x$as_lineno_2" &&
-+ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
-
- # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
- # uniformly replaced by the line number. The first 'sed' inserts a
-- # line-number line before each line; the second 'sed' does the real
-- # work. The second script uses 'N' to pair each line-number line
-- # with the numbered line, and appends trailing '-' during
-- # substitution so that $LINENO is not a special case at line end.
-+ # line-number line after each line using $LINENO; the second 'sed'
-+ # does the real work. The second script uses 'N' to pair each
-+ # line-number line with the line containing $LINENO, and appends
-+ # trailing '-' during substitution so that $LINENO is not a special
-+ # case at line end.
- # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
-- # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
-- sed '=' <$as_myself |
-+ # scripts with optimization help from Paolo Bonzini. Blame Lee
-+ # E. McMahon (1931-1989) for sed's syntax. :-)
-+ sed -n '
-+ p
-+ /[$]LINENO/=
-+ ' <$as_myself |
- sed '
-+ s/[$]LINENO.*/&-/
-+ t lineno
-+ b
-+ :lineno
- N
-- s,$,-,
-- : loop
-- s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
-+ :loop
-+ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
- t loop
-- s,-$,,
-- s,^['$as_cr_digits']*\n,,
-+ s/-\n.*//
- ' >$as_me.lineno &&
-- chmod +x $as_me.lineno ||
-+ chmod +x "$as_me.lineno" ||
- { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
- { (exit 1); exit 1; }; }
-
- # Don't try to exec as it changes $[0], causing all sort of problems
- # (the dirname of $[0] is not the place where we might find the
-- # original and so on. Autoconf is especially sensible to this).
-- . ./$as_me.lineno
-+ # original and so on. Autoconf is especially sensitive to this).
-+ . "./$as_me.lineno"
- # Exit status is that of the last command.
- exit
- }
-
-
--case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
-- *c*,-n*) ECHO_N= ECHO_C='
--' ECHO_T=' ' ;;
-- *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
-- *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
-+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
-+ as_dirname=dirname
-+else
-+ as_dirname=false
-+fi
-+
-+ECHO_C= ECHO_N= ECHO_T=
-+case `echo -n x` in
-+-n*)
-+ case `echo 'x\c'` in
-+ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
-+ *) ECHO_C='\c';;
-+ esac;;
-+*)
-+ ECHO_N='-n';;
- esac
-
--if expr a : '\(a\)' >/dev/null 2>&1; then
-+if expr a : '\(a\)' >/dev/null 2>&1 &&
-+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
- else
- as_expr=false
- fi
-
- rm -f conf$$ conf$$.exe conf$$.file
-+if test -d conf$$.dir; then
-+ rm -f conf$$.dir/conf$$.file
-+else
-+ rm -f conf$$.dir
-+ mkdir conf$$.dir
-+fi
- echo >conf$$.file
- if ln -s conf$$.file conf$$ 2>/dev/null; then
-- # We could just check for DJGPP; but this test a) works b) is more generic
-- # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
-- if test -f conf$$.exe; then
-- # Don't use ln at all; we don't have any links
-+ as_ln_s='ln -s'
-+ # ... but there are two gotchas:
-+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
-+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
-+ # In both cases, we have to default to `cp -p'.
-+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
- as_ln_s='cp -p'
-- else
-- as_ln_s='ln -s'
-- fi
- elif ln conf$$.file conf$$ 2>/dev/null; then
- as_ln_s=ln
- else
- as_ln_s='cp -p'
- fi
--rm -f conf$$ conf$$.exe conf$$.file
-+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-+rmdir conf$$.dir 2>/dev/null
-
- if mkdir -p . 2>/dev/null; then
- as_mkdir_p=:
-@@ -222,7 +518,28 @@
- as_mkdir_p=false
- fi
-
--as_executable_p="test -f"
-+if test -x / >/dev/null 2>&1; then
-+ as_test_x='test -x'
-+else
-+ if ls -dL / >/dev/null 2>&1; then
-+ as_ls_L_option=L
-+ else
-+ as_ls_L_option=
-+ fi
-+ as_test_x='
-+ eval sh -c '\''
-+ if test -d "$1"; then
-+ test -d "$1/.";
-+ else
-+ case $1 in
-+ -*)set "./$1";;
-+ esac;
-+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
-+ ???[sx]*):;;*)false;;esac;fi
-+ '\'' sh
-+ '
-+fi
-+as_executable_p=$as_test_x
-
- # Sed expression to map a string onto a valid CPP name.
- as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-@@ -231,39 +548,27 @@
- as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
--# IFS
--# We need space, tab and new line, in precisely that order.
--as_nl='
--'
--IFS=" $as_nl"
--
--# CDPATH.
--$as_unset CDPATH
-
-+exec 7<&0 </dev/null 6>&1
-
- # Name of the host.
- # hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
- # so uname gets run too.
- ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
-
--exec 6>&1
--
- #
- # Initializations.
- #
- ac_default_prefix=/usr/local
-+ac_clean_files=
- ac_config_libobj_dir=.
-+LIBOBJS=
- cross_compiling=no
- subdirs=
- MFLAGS=
- MAKEFLAGS=
- SHELL=${CONFIG_SHELL-/bin/sh}
-
--# Maximum number of lines to put in a shell here document.
--# This variable seems obsolete. It should probably be removed, and
--# only ac_max_sed_lines should be used.
--: ${ac_max_here_lines=38}
--
- # Identity of this package.
- PACKAGE_NAME=
- PACKAGE_TARNAME=
-@@ -275,42 +580,136 @@
- # Factoring default headers for most tests.
- ac_includes_default="\
- #include <stdio.h>
--#if HAVE_SYS_TYPES_H
-+#ifdef HAVE_SYS_TYPES_H
- # include <sys/types.h>
- #endif
--#if HAVE_SYS_STAT_H
-+#ifdef HAVE_SYS_STAT_H
- # include <sys/stat.h>
- #endif
--#if STDC_HEADERS
-+#ifdef STDC_HEADERS
- # include <stdlib.h>
- # include <stddef.h>
- #else
--# if HAVE_STDLIB_H
-+# ifdef HAVE_STDLIB_H
- # include <stdlib.h>
- # endif
- #endif
--#if HAVE_STRING_H
--# if !STDC_HEADERS && HAVE_MEMORY_H
-+#ifdef HAVE_STRING_H
-+# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
- # include <memory.h>
- # endif
- # include <string.h>
- #endif
--#if HAVE_STRINGS_H
-+#ifdef HAVE_STRINGS_H
- # include <strings.h>
- #endif
--#if HAVE_INTTYPES_H
-+#ifdef HAVE_INTTYPES_H
- # include <inttypes.h>
--#else
--# if HAVE_STDINT_H
--# include <stdint.h>
--# endif
- #endif
--#if HAVE_UNISTD_H
-+#ifdef HAVE_STDINT_H
-+# include <stdint.h>
-+#endif
-+#ifdef HAVE_UNISTD_H
- # include <unistd.h>
- #endif"
-
--ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT MKDIR RM CP LN TAR RPM SED FIND CPP EGREP LD ac_ct_LD AS ac_ct_AS OBJCOPY ac_ct_OBJCOPY I386_CC I386_CPP I386_LD I386_AS I386_OBJCOPY IA64_CC IA64_CPP IA64_LD IA64_AS IA64_OBJCOPY HOST_CC HOST_CFLAGS I386_CFLAGS I386_ASFLAGS I386_LDFLAGS IA64_CFLAGS IA64_ASFLAGS IA64_LDFLAGS LIBOBJS LTLIBOBJS'
-+ac_subst_vars='SHELL
-+PATH_SEPARATOR
-+PACKAGE_NAME
-+PACKAGE_TARNAME
-+PACKAGE_VERSION
-+PACKAGE_STRING
-+PACKAGE_BUGREPORT
-+exec_prefix
-+prefix
-+program_transform_name
-+bindir
-+sbindir
-+libexecdir
-+datarootdir
-+datadir
-+sysconfdir
-+sharedstatedir
-+localstatedir
-+includedir
-+oldincludedir
-+docdir
-+infodir
-+htmldir
-+dvidir
-+pdfdir
-+psdir
-+libdir
-+localedir
-+mandir
-+DEFS
-+ECHO_C
-+ECHO_N
-+ECHO_T
-+LIBS
-+build_alias
-+host_alias
-+target_alias
-+build
-+build_cpu
-+build_vendor
-+build_os
-+host
-+host_cpu
-+host_vendor
-+host_os
-+CC
-+CFLAGS
-+LDFLAGS
-+CPPFLAGS
-+ac_ct_CC
-+EXEEXT
-+OBJEXT
-+MKDIR
-+RM
-+CP
-+LN
-+TAR
-+RPM
-+SED
-+FIND
-+CPP
-+GREP
-+EGREP
-+LD
-+AS
-+OBJCOPY
-+I386_CC
-+I386_CPP
-+I386_LD
-+I386_AS
-+I386_OBJCOPY
-+IA64_CC
-+IA64_CPP
-+IA64_LD
-+IA64_AS
-+IA64_OBJCOPY
-+HOST_CC
-+HOST_CFLAGS
-+I386_CFLAGS
-+I386_ASFLAGS
-+I386_LDFLAGS
-+IA64_CFLAGS
-+IA64_ASFLAGS
-+IA64_LDFLAGS
-+LIBOBJS
-+LTLIBOBJS'
- ac_subst_files=''
-+ ac_precious_vars='build_alias
-+host_alias
-+target_alias
-+CC
-+CFLAGS
-+LDFLAGS
-+LIBS
-+CPPFLAGS
-+CPP'
-+
-
- # Initialize some variables set by options.
- ac_init_help=
-@@ -337,34 +736,48 @@
- # and all the variables that are supposed to be based on exec_prefix
- # by default will actually change.
- # Use braces instead of parens because sh, perl, etc. also accept them.
-+# (The list follows the same order as the GNU Coding Standards.)
- bindir='${exec_prefix}/bin'
- sbindir='${exec_prefix}/sbin'
- libexecdir='${exec_prefix}/libexec'
--datadir='${prefix}/share'
-+datarootdir='${prefix}/share'
-+datadir='${datarootdir}'
- sysconfdir='${prefix}/etc'
- sharedstatedir='${prefix}/com'
- localstatedir='${prefix}/var'
--libdir='${exec_prefix}/lib'
- includedir='${prefix}/include'
- oldincludedir='/usr/include'
--infodir='${prefix}/info'
--mandir='${prefix}/man'
-+docdir='${datarootdir}/doc/${PACKAGE}'
-+infodir='${datarootdir}/info'
-+htmldir='${docdir}'
-+dvidir='${docdir}'
-+pdfdir='${docdir}'
-+psdir='${docdir}'
-+libdir='${exec_prefix}/lib'
-+localedir='${datarootdir}/locale'
-+mandir='${datarootdir}/man'
-
- ac_prev=
-+ac_dashdash=
- for ac_option
- do
- # If the previous option needs an argument, assign it.
- if test -n "$ac_prev"; then
-- eval "$ac_prev=\$ac_option"
-+ eval $ac_prev=\$ac_option
- ac_prev=
- continue
- fi
-
-- ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'`
-+ case $ac_option in
-+ *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
-+ *) ac_optarg=yes ;;
-+ esac
-
- # Accept the important Cygnus configure options, so we can diagnose typos.
-
-- case $ac_option in
-+ case $ac_dashdash$ac_option in
-+ --)
-+ ac_dashdash=yes ;;
-
- -bindir | --bindir | --bindi | --bind | --bin | --bi)
- ac_prev=bindir ;;
-@@ -386,33 +799,45 @@
- --config-cache | -C)
- cache_file=config.cache ;;
-
-- -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-+ -datadir | --datadir | --datadi | --datad)
- ac_prev=datadir ;;
-- -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-- | --da=*)
-+ -datadir=* | --datadir=* | --datadi=* | --datad=*)
- datadir=$ac_optarg ;;
-
-+ -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
-+ | --dataroo | --dataro | --datar)
-+ ac_prev=datarootdir ;;
-+ -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
-+ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
-+ datarootdir=$ac_optarg ;;
-+
- -disable-* | --disable-*)
- ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
- # Reject names that are not valid shell variable names.
-- expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-+ expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid feature name: $ac_feature" >&2
- { (exit 1); exit 1; }; }
-- ac_feature=`echo $ac_feature | sed 's/-/_/g'`
-- eval "enable_$ac_feature=no" ;;
-+ ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
-+ eval enable_$ac_feature=no ;;
-+
-+ -docdir | --docdir | --docdi | --doc | --do)
-+ ac_prev=docdir ;;
-+ -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
-+ docdir=$ac_optarg ;;
-+
-+ -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
-+ ac_prev=dvidir ;;
-+ -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
-+ dvidir=$ac_optarg ;;
-
- -enable-* | --enable-*)
- ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
- # Reject names that are not valid shell variable names.
-- expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-+ expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid feature name: $ac_feature" >&2
- { (exit 1); exit 1; }; }
-- ac_feature=`echo $ac_feature | sed 's/-/_/g'`
-- case $ac_option in
-- *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
-- *) ac_optarg=yes ;;
-- esac
-- eval "enable_$ac_feature='$ac_optarg'" ;;
-+ ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
-+ eval enable_$ac_feature=\$ac_optarg ;;
-
- -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
- | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-@@ -439,6 +864,12 @@
- -host=* | --host=* | --hos=* | --ho=*)
- host_alias=$ac_optarg ;;
-
-+ -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
-+ ac_prev=htmldir ;;
-+ -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
-+ | --ht=*)
-+ htmldir=$ac_optarg ;;
-+
- -includedir | --includedir | --includedi | --included | --include \
- | --includ | --inclu | --incl | --inc)
- ac_prev=includedir ;;
-@@ -463,13 +894,16 @@
- | --libexe=* | --libex=* | --libe=*)
- libexecdir=$ac_optarg ;;
-
-+ -localedir | --localedir | --localedi | --localed | --locale)
-+ ac_prev=localedir ;;
-+ -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
-+ localedir=$ac_optarg ;;
-+
- -localstatedir | --localstatedir | --localstatedi | --localstated \
-- | --localstate | --localstat | --localsta | --localst \
-- | --locals | --local | --loca | --loc | --lo)
-+ | --localstate | --localstat | --localsta | --localst | --locals)
- ac_prev=localstatedir ;;
- -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-- | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-- | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-+ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
- localstatedir=$ac_optarg ;;
-
- -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-@@ -534,6 +968,16 @@
- | --progr-tra=* | --program-tr=* | --program-t=*)
- program_transform_name=$ac_optarg ;;
-
-+ -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
-+ ac_prev=pdfdir ;;
-+ -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
-+ pdfdir=$ac_optarg ;;
-+
-+ -psdir | --psdir | --psdi | --psd | --ps)
-+ ac_prev=psdir ;;
-+ -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
-+ psdir=$ac_optarg ;;
-+
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil)
- silent=yes ;;
-@@ -586,24 +1030,20 @@
- -with-* | --with-*)
- ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
- # Reject names that are not valid shell variable names.
-- expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-+ expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid package name: $ac_package" >&2
- { (exit 1); exit 1; }; }
-- ac_package=`echo $ac_package| sed 's/-/_/g'`
-- case $ac_option in
-- *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
-- *) ac_optarg=yes ;;
-- esac
-- eval "with_$ac_package='$ac_optarg'" ;;
-+ ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
-+ eval with_$ac_package=\$ac_optarg ;;
-
- -without-* | --without-*)
- ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
- # Reject names that are not valid shell variable names.
-- expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-+ expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid package name: $ac_package" >&2
- { (exit 1); exit 1; }; }
-- ac_package=`echo $ac_package | sed 's/-/_/g'`
-- eval "with_$ac_package=no" ;;
-+ ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
-+ eval with_$ac_package=no ;;
-
- --x)
- # Obsolete; use --with-x.
-@@ -634,8 +1074,7 @@
- expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
- { (exit 1); exit 1; }; }
-- ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`
-- eval "$ac_envvar='$ac_optarg'"
-+ eval $ac_envvar=\$ac_optarg
- export $ac_envvar ;;
-
- *)
-@@ -655,27 +1094,19 @@
- { (exit 1); exit 1; }; }
- fi
-
--# Be sure to have absolute paths.
--for ac_var in exec_prefix prefix
--do
-- eval ac_val=$`echo $ac_var`
-- case $ac_val in
-- [\\/$]* | ?:[\\/]* | NONE | '' ) ;;
-- *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
-- { (exit 1); exit 1; }; };;
-- esac
--done
--
--# Be sure to have absolute paths.
--for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \
-- localstatedir libdir includedir oldincludedir infodir mandir
-+# Be sure to have absolute directory names.
-+for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
-+ datadir sysconfdir sharedstatedir localstatedir includedir \
-+ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
-+ libdir localedir mandir
- do
-- eval ac_val=$`echo $ac_var`
-+ eval ac_val=\$$ac_var
- case $ac_val in
-- [\\/$]* | ?:[\\/]* ) ;;
-- *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
-- { (exit 1); exit 1; }; };;
-+ [\\/$]* | ?:[\\/]* ) continue;;
-+ NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
- esac
-+ { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
-+ { (exit 1); exit 1; }; }
- done
-
- # There might be people who depend on the old broken behavior: `$host'
-@@ -702,74 +1133,76 @@
- test "$silent" = yes && exec 6>/dev/null
-
-
-+ac_pwd=`pwd` && test -n "$ac_pwd" &&
-+ac_ls_di=`ls -di .` &&
-+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
-+ { echo "$as_me: error: Working directory cannot be determined" >&2
-+ { (exit 1); exit 1; }; }
-+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
-+ { echo "$as_me: error: pwd does not report name of working directory" >&2
-+ { (exit 1); exit 1; }; }
-+
-+
- # Find the source files, if location was not specified.
- if test -z "$srcdir"; then
- ac_srcdir_defaulted=yes
-- # Try the directory containing this script, then its parent.
-- ac_confdir=`(dirname "$0") 2>/dev/null ||
-+ # Try the directory containing this script, then the parent directory.
-+ ac_confdir=`$as_dirname -- "$0" ||
- $as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$0" : 'X\(//\)[^/]' \| \
- X"$0" : 'X\(//\)$' \| \
-- X"$0" : 'X\(/\)' \| \
-- . : '\(.\)' 2>/dev/null ||
-+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
- echo X"$0" |
-- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-- /^X\(\/\/\)$/{ s//\1/; q; }
-- /^X\(\/\).*/{ s//\1/; q; }
-- s/.*/./; q'`
-+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\/\)[^/].*/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\/\)$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\).*/{
-+ s//\1/
-+ q
-+ }
-+ s/.*/./; q'`
- srcdir=$ac_confdir
-- if test ! -r $srcdir/$ac_unique_file; then
-+ if test ! -r "$srcdir/$ac_unique_file"; then
- srcdir=..
- fi
- else
- ac_srcdir_defaulted=no
- fi
--if test ! -r $srcdir/$ac_unique_file; then
-- if test "$ac_srcdir_defaulted" = yes; then
-- { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2
-- { (exit 1); exit 1; }; }
-- else
-- { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
-- { (exit 1); exit 1; }; }
-- fi
--fi
--(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null ||
-- { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2
-- { (exit 1); exit 1; }; }
--srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'`
--ac_env_build_alias_set=${build_alias+set}
--ac_env_build_alias_value=$build_alias
--ac_cv_env_build_alias_set=${build_alias+set}
--ac_cv_env_build_alias_value=$build_alias
--ac_env_host_alias_set=${host_alias+set}
--ac_env_host_alias_value=$host_alias
--ac_cv_env_host_alias_set=${host_alias+set}
--ac_cv_env_host_alias_value=$host_alias
--ac_env_target_alias_set=${target_alias+set}
--ac_env_target_alias_value=$target_alias
--ac_cv_env_target_alias_set=${target_alias+set}
--ac_cv_env_target_alias_value=$target_alias
--ac_env_CC_set=${CC+set}
--ac_env_CC_value=$CC
--ac_cv_env_CC_set=${CC+set}
--ac_cv_env_CC_value=$CC
--ac_env_CFLAGS_set=${CFLAGS+set}
--ac_env_CFLAGS_value=$CFLAGS
--ac_cv_env_CFLAGS_set=${CFLAGS+set}
--ac_cv_env_CFLAGS_value=$CFLAGS
--ac_env_LDFLAGS_set=${LDFLAGS+set}
--ac_env_LDFLAGS_value=$LDFLAGS
--ac_cv_env_LDFLAGS_set=${LDFLAGS+set}
--ac_cv_env_LDFLAGS_value=$LDFLAGS
--ac_env_CPPFLAGS_set=${CPPFLAGS+set}
--ac_env_CPPFLAGS_value=$CPPFLAGS
--ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set}
--ac_cv_env_CPPFLAGS_value=$CPPFLAGS
--ac_env_CPP_set=${CPP+set}
--ac_env_CPP_value=$CPP
--ac_cv_env_CPP_set=${CPP+set}
--ac_cv_env_CPP_value=$CPP
-+if test ! -r "$srcdir/$ac_unique_file"; then
-+ test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
-+ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
-+ { (exit 1); exit 1; }; }
-+fi
-+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
-+ac_abs_confdir=`(
-+ cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2
-+ { (exit 1); exit 1; }; }
-+ pwd)`
-+# When building in place, set srcdir=.
-+if test "$ac_abs_confdir" = "$ac_pwd"; then
-+ srcdir=.
-+fi
-+# Remove unnecessary trailing slashes from srcdir.
-+# Double slashes in file names in object file debugging info
-+# mess up M-x gdb in Emacs.
-+case $srcdir in
-+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
-+esac
-+for ac_var in $ac_precious_vars; do
-+ eval ac_env_${ac_var}_set=\${${ac_var}+set}
-+ eval ac_env_${ac_var}_value=\$${ac_var}
-+ eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
-+ eval ac_cv_env_${ac_var}_value=\$${ac_var}
-+done
-
- #
- # Report the --help message.
-@@ -798,9 +1231,6 @@
- -n, --no-create do not create output files
- --srcdir=DIR find the sources in DIR [configure dir or \`..']
-
--_ACEOF
--
-- cat <<_ACEOF
- Installation directories:
- --prefix=PREFIX install architecture-independent files in PREFIX
- [$ac_default_prefix]
-@@ -818,15 +1248,22 @@
- --bindir=DIR user executables [EPREFIX/bin]
- --sbindir=DIR system admin executables [EPREFIX/sbin]
- --libexecdir=DIR program executables [EPREFIX/libexec]
-- --datadir=DIR read-only architecture-independent data [PREFIX/share]
- --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
- --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
- --localstatedir=DIR modifiable single-machine data [PREFIX/var]
- --libdir=DIR object code libraries [EPREFIX/lib]
- --includedir=DIR C header files [PREFIX/include]
- --oldincludedir=DIR C header files for non-gcc [/usr/include]
-- --infodir=DIR info documentation [PREFIX/info]
-- --mandir=DIR man documentation [PREFIX/man]
-+ --datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
-+ --datadir=DIR read-only architecture-independent data [DATAROOTDIR]
-+ --infodir=DIR info documentation [DATAROOTDIR/info]
-+ --localedir=DIR locale-dependent data [DATAROOTDIR/locale]
-+ --mandir=DIR man documentation [DATAROOTDIR/man]
-+ --docdir=DIR documentation root [DATAROOTDIR/doc/PACKAGE]
-+ --htmldir=DIR html documentation [DOCDIR]
-+ --dvidir=DIR dvi documentation [DOCDIR]
-+ --pdfdir=DIR pdf documentation [DOCDIR]
-+ --psdir=DIR ps documentation [DOCDIR]
- _ACEOF
-
- cat <<\_ACEOF
-@@ -852,126 +1289,95 @@
- CFLAGS C compiler flags
- LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
- nonstandard directory <lib dir>
-- CPPFLAGS C/C++ preprocessor flags, e.g. -I<include dir> if you have
-- headers in a nonstandard directory <include dir>
-+ LIBS libraries to pass to the linker, e.g. -l<library>
-+ CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I<include dir> if
-+ you have headers in a nonstandard directory <include dir>
- CPP C preprocessor
-
- Use these variables to override the choices made by `configure' or to help
- it to find libraries and programs with nonstandard names/locations.
-
- _ACEOF
-+ac_status=$?
- fi
-
- if test "$ac_init_help" = "recursive"; then
- # If there are subdirs, report their specific --help.
-- ac_popdir=`pwd`
- for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
-- test -d $ac_dir || continue
-+ test -d "$ac_dir" || continue
- ac_builddir=.
-
--if test "$ac_dir" != .; then
-+case "$ac_dir" in
-+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-+*)
- ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-- # A "../" for each directory in $ac_dir_suffix.
-- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
--else
-- ac_dir_suffix= ac_top_builddir=
--fi
-+ # A ".." for each directory in $ac_dir_suffix.
-+ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
-+ case $ac_top_builddir_sub in
-+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
-+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
-+ esac ;;
-+esac
-+ac_abs_top_builddir=$ac_pwd
-+ac_abs_builddir=$ac_pwd$ac_dir_suffix
-+# for backward compatibility:
-+ac_top_builddir=$ac_top_build_prefix
-
- case $srcdir in
-- .) # No --srcdir option. We are building in place.
-+ .) # We are building in place.
- ac_srcdir=.
-- if test -z "$ac_top_builddir"; then
-- ac_top_srcdir=.
-- else
-- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
-- fi ;;
-- [\\/]* | ?:[\\/]* ) # Absolute path.
-+ ac_top_srcdir=$ac_top_builddir_sub
-+ ac_abs_top_srcdir=$ac_pwd ;;
-+ [\\/]* | ?:[\\/]* ) # Absolute name.
- ac_srcdir=$srcdir$ac_dir_suffix;
-- ac_top_srcdir=$srcdir ;;
-- *) # Relative path.
-- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
-- ac_top_srcdir=$ac_top_builddir$srcdir ;;
--esac
--
--# Do not use `cd foo && pwd` to compute absolute paths, because
--# the directories may not exist.
--case `pwd` in
--.) ac_abs_builddir="$ac_dir";;
--*)
-- case "$ac_dir" in
-- .) ac_abs_builddir=`pwd`;;
-- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
-- *) ac_abs_builddir=`pwd`/"$ac_dir";;
-- esac;;
--esac
--case $ac_abs_builddir in
--.) ac_abs_top_builddir=${ac_top_builddir}.;;
--*)
-- case ${ac_top_builddir}. in
-- .) ac_abs_top_builddir=$ac_abs_builddir;;
-- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
-- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
-- esac;;
--esac
--case $ac_abs_builddir in
--.) ac_abs_srcdir=$ac_srcdir;;
--*)
-- case $ac_srcdir in
-- .) ac_abs_srcdir=$ac_abs_builddir;;
-- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
-- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
-- esac;;
--esac
--case $ac_abs_builddir in
--.) ac_abs_top_srcdir=$ac_top_srcdir;;
--*)
-- case $ac_top_srcdir in
-- .) ac_abs_top_srcdir=$ac_abs_builddir;;
-- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
-- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
-- esac;;
-+ ac_top_srcdir=$srcdir
-+ ac_abs_top_srcdir=$srcdir ;;
-+ *) # Relative name.
-+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
-+ ac_top_srcdir=$ac_top_build_prefix$srcdir
-+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
- esac
-+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-
-- cd $ac_dir
-- # Check for guested configure; otherwise get Cygnus style configure.
-- if test -f $ac_srcdir/configure.gnu; then
-- echo
-- $SHELL $ac_srcdir/configure.gnu --help=recursive
-- elif test -f $ac_srcdir/configure; then
-- echo
-- $SHELL $ac_srcdir/configure --help=recursive
-- elif test -f $ac_srcdir/configure.ac ||
-- test -f $ac_srcdir/configure.in; then
-- echo
-- $ac_configure --help
-+ cd "$ac_dir" || { ac_status=$?; continue; }
-+ # Check for guested configure.
-+ if test -f "$ac_srcdir/configure.gnu"; then
-+ echo &&
-+ $SHELL "$ac_srcdir/configure.gnu" --help=recursive
-+ elif test -f "$ac_srcdir/configure"; then
-+ echo &&
-+ $SHELL "$ac_srcdir/configure" --help=recursive
- else
- echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
-- fi
-- cd $ac_popdir
-+ fi || ac_status=$?
-+ cd "$ac_pwd" || { ac_status=$?; break; }
- done
- fi
-
--test -n "$ac_init_help" && exit 0
-+test -n "$ac_init_help" && exit $ac_status
- if $ac_init_version; then
- cat <<\_ACEOF
-+configure
-+generated by GNU Autoconf 2.61
-
--Copyright (C) 2003 Free Software Foundation, Inc.
-+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-+2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
- This configure script is free software; the Free Software Foundation
- gives unlimited permission to copy, distribute and modify it.
- _ACEOF
-- exit 0
-+ exit
- fi
--exec 5>config.log
--cat >&5 <<_ACEOF
-+cat >config.log <<_ACEOF
- This file contains any messages produced by compilers while
- running configure, to aid debugging if configure makes a mistake.
-
- It was created by $as_me, which was
--generated by GNU Autoconf 2.59. Invocation command line was
-+generated by GNU Autoconf 2.61. Invocation command line was
-
- $ $0 $@
-
- _ACEOF
-+exec 5>>config.log
- {
- cat <<_ASUNAME
- ## --------- ##
-@@ -990,7 +1396,7 @@
- /bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
- /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
- /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
--hostinfo = `(hostinfo) 2>/dev/null || echo unknown`
-+/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown`
- /bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
- /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
- /bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
-@@ -1004,6 +1410,7 @@
- test -z "$as_dir" && as_dir=.
- echo "PATH: $as_dir"
- done
-+IFS=$as_save_IFS
-
- } >&5
-
-@@ -1025,7 +1432,6 @@
- ac_configure_args=
- ac_configure_args0=
- ac_configure_args1=
--ac_sep=
- ac_must_keep_next=false
- for ac_pass in 1 2
- do
-@@ -1036,7 +1442,7 @@
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil)
- continue ;;
-- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
-+ *\'*)
- ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
- esac
- case $ac_pass in
-@@ -1058,9 +1464,7 @@
- -* ) ac_must_keep_next=true ;;
- esac
- fi
-- ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
-- # Get rid of the leading space.
-- ac_sep=" "
-+ ac_configure_args="$ac_configure_args '$ac_arg'"
- ;;
- esac
- done
-@@ -1071,8 +1475,8 @@
- # When interrupted or exit'd, cleanup temporary files, and complete
- # config.log. We remove comments because anyway the quotes in there
- # would cause problems or look ugly.
--# WARNING: Be sure not to use single quotes in there, as some shells,
--# such as our DU 5.0 friend, will then `close' the trap.
-+# WARNING: Use '\'' to represent an apostrophe within the trap.
-+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
- trap 'exit_status=$?
- # Save into config.log some information that might help in debugging.
- {
-@@ -1085,20 +1489,34 @@
- _ASBOX
- echo
- # The following way of writing the cache mishandles newlines in values,
--{
-+(
-+ for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
-+ eval ac_val=\$$ac_var
-+ case $ac_val in #(
-+ *${as_nl}*)
-+ case $ac_var in #(
-+ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
-+echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
-+ esac
-+ case $ac_var in #(
-+ _ | IFS | as_nl) ;; #(
-+ *) $as_unset $ac_var ;;
-+ esac ;;
-+ esac
-+ done
- (set) 2>&1 |
-- case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in
-- *ac_space=\ *)
-+ case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
-+ *${as_nl}ac_space=\ *)
- sed -n \
-- "s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
-- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
-- ;;
-+ "s/'\''/'\''\\\\'\'''\''/g;
-+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
-+ ;; #(
- *)
-- sed -n \
-- "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
-+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
- ;;
-- esac;
--}
-+ esac |
-+ sort
-+)
- echo
-
- cat <<\_ASBOX
-@@ -1109,22 +1527,28 @@
- echo
- for ac_var in $ac_subst_vars
- do
-- eval ac_val=$`echo $ac_var`
-- echo "$ac_var='"'"'$ac_val'"'"'"
-+ eval ac_val=\$$ac_var
-+ case $ac_val in
-+ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
-+ esac
-+ echo "$ac_var='\''$ac_val'\''"
- done | sort
- echo
-
- if test -n "$ac_subst_files"; then
- cat <<\_ASBOX
--## ------------- ##
--## Output files. ##
--## ------------- ##
-+## ------------------- ##
-+## File substitutions. ##
-+## ------------------- ##
- _ASBOX
- echo
- for ac_var in $ac_subst_files
- do
-- eval ac_val=$`echo $ac_var`
-- echo "$ac_var='"'"'$ac_val'"'"'"
-+ eval ac_val=\$$ac_var
-+ case $ac_val in
-+ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
-+ esac
-+ echo "$ac_var='\''$ac_val'\''"
- done | sort
- echo
- fi
-@@ -1136,26 +1560,24 @@
- ## ----------- ##
- _ASBOX
- echo
-- sed "/^$/d" confdefs.h | sort
-+ cat confdefs.h
- echo
- fi
- test "$ac_signal" != 0 &&
- echo "$as_me: caught signal $ac_signal"
- echo "$as_me: exit $exit_status"
- } >&5
-- rm -f core *.core &&
-- rm -rf conftest* confdefs* conf$$* $ac_clean_files &&
-+ rm -f core *.core core.conftest.* &&
-+ rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
- exit $exit_status
-- ' 0
-+' 0
- for ac_signal in 1 2 13 15; do
- trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
- done
- ac_signal=0
-
- # confdefs.h avoids OS command line length limits that DEFS can exceed.
--rm -rf conftest* confdefs.h
--# AIX cpp loses on an empty file, so make sure it contains at least a newline.
--echo >confdefs.h
-+rm -f -r conftest* confdefs.h
-
- # Predefined preprocessor variables.
-
-@@ -1186,14 +1608,17 @@
-
- # Let the site file select an alternate cache file if it wants to.
- # Prefer explicitly selected file to automatically selected ones.
--if test -z "$CONFIG_SITE"; then
-- if test "x$prefix" != xNONE; then
-- CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-- else
-- CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-- fi
-+if test -n "$CONFIG_SITE"; then
-+ set x "$CONFIG_SITE"
-+elif test "x$prefix" != xNONE; then
-+ set x "$prefix/share/config.site" "$prefix/etc/config.site"
-+else
-+ set x "$ac_default_prefix/share/config.site" \
-+ "$ac_default_prefix/etc/config.site"
- fi
--for ac_site_file in $CONFIG_SITE; do
-+shift
-+for ac_site_file
-+do
- if test -r "$ac_site_file"; then
- { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
- echo "$as_me: loading site script $ac_site_file" >&6;}
-@@ -1209,8 +1634,8 @@
- { echo "$as_me:$LINENO: loading cache $cache_file" >&5
- echo "$as_me: loading cache $cache_file" >&6;}
- case $cache_file in
-- [\\/]* | ?:[\\/]* ) . $cache_file;;
-- *) . ./$cache_file;;
-+ [\\/]* | ?:[\\/]* ) . "$cache_file";;
-+ *) . "./$cache_file";;
- esac
- fi
- else
-@@ -1222,12 +1647,11 @@
- # Check that the precious variables saved in the cache have kept the same
- # value.
- ac_cache_corrupted=false
--for ac_var in `(set) 2>&1 |
-- sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
-+for ac_var in $ac_precious_vars; do
- eval ac_old_set=\$ac_cv_env_${ac_var}_set
- eval ac_new_set=\$ac_env_${ac_var}_set
-- eval ac_old_val="\$ac_cv_env_${ac_var}_value"
-- eval ac_new_val="\$ac_env_${ac_var}_value"
-+ eval ac_old_val=\$ac_cv_env_${ac_var}_value
-+ eval ac_new_val=\$ac_env_${ac_var}_value
- case $ac_old_set,$ac_new_set in
- set,)
- { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
-@@ -1252,8 +1676,7 @@
- # Pass precious variables to config.status.
- if test "$ac_new_set" = set; then
- case $ac_new_val in
-- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
-- ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
-+ *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
- *) ac_arg=$ac_var=$ac_new_val ;;
- esac
- case " $ac_configure_args " in
-@@ -1270,12 +1693,6 @@
- { (exit 1); exit 1; }; }
- fi
-
--ac_ext=c
--ac_cpp='$CPP $CPPFLAGS'
--ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
--ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
--ac_compiler_gnu=$ac_cv_c_compiler_gnu
--
-
-
-
-@@ -1292,88 +1709,128 @@
-
-
-
-+ac_ext=c
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
- ac_aux_dir=
--for ac_dir in ./config $srcdir/./config; do
-- if test -f $ac_dir/install-sh; then
-+for ac_dir in ./config "$srcdir"/./config; do
-+ if test -f "$ac_dir/install-sh"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install-sh -c"
- break
-- elif test -f $ac_dir/install.sh; then
-+ elif test -f "$ac_dir/install.sh"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install.sh -c"
- break
-- elif test -f $ac_dir/shtool; then
-+ elif test -f "$ac_dir/shtool"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/shtool install -c"
- break
- fi
- done
- if test -z "$ac_aux_dir"; then
-- { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in ./config $srcdir/./config" >&5
--echo "$as_me: error: cannot find install-sh or install.sh in ./config $srcdir/./config" >&2;}
-+ { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in ./config \"$srcdir\"/./config" >&5
-+echo "$as_me: error: cannot find install-sh or install.sh in ./config \"$srcdir\"/./config" >&2;}
- { (exit 1); exit 1; }; }
- fi
--ac_config_guess="$SHELL $ac_aux_dir/config.guess"
--ac_config_sub="$SHELL $ac_aux_dir/config.sub"
--ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
-+
-+# These three variables are undocumented and unsupported,
-+# and are intended to be withdrawn in a future Autoconf release.
-+# They can cause serious problems if a builder's source tree is in a directory
-+# whose full name contains unusual characters.
-+ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var.
-+ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var.
-+ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
-+
-
-
-
-
- # Make sure we can run config.sub.
--$ac_config_sub sun4 >/dev/null 2>&1 ||
-- { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5
--echo "$as_me: error: cannot run $ac_config_sub" >&2;}
-+$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
-+ { { echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5
-+echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;}
- { (exit 1); exit 1; }; }
-
--echo "$as_me:$LINENO: checking build system type" >&5
--echo $ECHO_N "checking build system type... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking build system type" >&5
-+echo $ECHO_N "checking build system type... $ECHO_C" >&6; }
- if test "${ac_cv_build+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- ac_cv_build_alias=$build_alias
--test -z "$ac_cv_build_alias" &&
-- ac_cv_build_alias=`$ac_config_guess`
--test -z "$ac_cv_build_alias" &&
-+ ac_build_alias=$build_alias
-+test "x$ac_build_alias" = x &&
-+ ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
-+test "x$ac_build_alias" = x &&
- { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
- echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
- { (exit 1); exit 1; }; }
--ac_cv_build=`$ac_config_sub $ac_cv_build_alias` ||
-- { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5
--echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;}
-+ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
-+ { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5
-+echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;}
- { (exit 1); exit 1; }; }
-
- fi
--echo "$as_me:$LINENO: result: $ac_cv_build" >&5
--echo "${ECHO_T}$ac_cv_build" >&6
-+{ echo "$as_me:$LINENO: result: $ac_cv_build" >&5
-+echo "${ECHO_T}$ac_cv_build" >&6; }
-+case $ac_cv_build in
-+*-*-*) ;;
-+*) { { echo "$as_me:$LINENO: error: invalid value of canonical build" >&5
-+echo "$as_me: error: invalid value of canonical build" >&2;}
-+ { (exit 1); exit 1; }; };;
-+esac
- build=$ac_cv_build
--build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
--build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
--build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-+ac_save_IFS=$IFS; IFS='-'
-+set x $ac_cv_build
-+shift
-+build_cpu=$1
-+build_vendor=$2
-+shift; shift
-+# Remember, the first character of IFS is used to create $*,
-+# except with old shells:
-+build_os=$*
-+IFS=$ac_save_IFS
-+case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
-
-
--echo "$as_me:$LINENO: checking host system type" >&5
--echo $ECHO_N "checking host system type... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking host system type" >&5
-+echo $ECHO_N "checking host system type... $ECHO_C" >&6; }
- if test "${ac_cv_host+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- ac_cv_host_alias=$host_alias
--test -z "$ac_cv_host_alias" &&
-- ac_cv_host_alias=$ac_cv_build_alias
--ac_cv_host=`$ac_config_sub $ac_cv_host_alias` ||
-- { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5
--echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;}
-+ if test "x$host_alias" = x; then
-+ ac_cv_host=$ac_cv_build
-+else
-+ ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
-+ { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5
-+echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;}
- { (exit 1); exit 1; }; }
-+fi
-
- fi
--echo "$as_me:$LINENO: result: $ac_cv_host" >&5
--echo "${ECHO_T}$ac_cv_host" >&6
-+{ echo "$as_me:$LINENO: result: $ac_cv_host" >&5
-+echo "${ECHO_T}$ac_cv_host" >&6; }
-+case $ac_cv_host in
-+*-*-*) ;;
-+*) { { echo "$as_me:$LINENO: error: invalid value of canonical host" >&5
-+echo "$as_me: error: invalid value of canonical host" >&2;}
-+ { (exit 1); exit 1; }; };;
-+esac
- host=$ac_cv_host
--host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
--host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
--host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-+ac_save_IFS=$IFS; IFS='-'
-+set x $ac_cv_host
-+shift
-+host_cpu=$1
-+host_vendor=$2
-+shift; shift
-+# Remember, the first character of IFS is used to create $*,
-+# except with old shells:
-+host_os=$*
-+IFS=$ac_save_IFS
-+case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
-
-
- #AC_CANONICAL_TARGET
-@@ -1391,22 +1848,22 @@
- targets=""
-
-
--# Check whether --with-i386 or --without-i386 was given.
-+# Check whether --with-i386 was given.
- if test "${with_i386+set}" = set; then
-- withval="$with_i386"
-- if test "withval" = "yes" ; then with_i386="i386"; else with_i386="$withval"; fi
-+ withval=$with_i386; if test "withval" = "yes" ; then with_i386="i386"; else with_i386="$withval"; fi
- else
- with_i386="no"
--fi;
-+fi
-
-
--# Check whether --with-ia64 or --without-ia64 was given.
-+
-+# Check whether --with-ia64 was given.
- if test "${with_ia64+set}" = set; then
-- withval="$with_ia64"
-- if test "withval" = "yes" ; then with_ia64="ia64"; else with_ia64="$withval"; fi
-+ withval=$with_ia64; if test "withval" = "yes" ; then with_ia64="ia64"; else with_ia64="$withval"; fi
- else
- with_ia64="no"
--fi;
-+fi
-+
-
- with_default="no"
- if test "$with_i386" = "no" &&
-@@ -1430,8 +1887,8 @@
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
- set dummy ${ac_tool_prefix}gcc; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
- if test "${ac_cv_prog_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -1444,32 +1901,34 @@
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_CC="${ac_tool_prefix}gcc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
- done
-+IFS=$as_save_IFS
-
- fi
- fi
- CC=$ac_cv_prog_CC
- if test -n "$CC"; then
-- echo "$as_me:$LINENO: result: $CC" >&5
--echo "${ECHO_T}$CC" >&6
-+ { echo "$as_me:$LINENO: result: $CC" >&5
-+echo "${ECHO_T}$CC" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
- fi
-
-+
- fi
- if test -z "$ac_cv_prog_CC"; then
- ac_ct_CC=$CC
- # Extract the first word of "gcc", so it can be a program name with args.
- set dummy gcc; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
- if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -1482,36 +1941,51 @@
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_CC="gcc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
- done
-+IFS=$as_save_IFS
-
- fi
- fi
- ac_ct_CC=$ac_cv_prog_ac_ct_CC
- if test -n "$ac_ct_CC"; then
-- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
--echo "${ECHO_T}$ac_ct_CC" >&6
-+ { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-+echo "${ECHO_T}$ac_ct_CC" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
- fi
-
-- CC=$ac_ct_CC
-+ if test "x$ac_ct_CC" = x; then
-+ CC=""
-+ else
-+ case $cross_compiling:$ac_tool_warned in
-+yes:)
-+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf at gnu.org." >&5
-+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf at gnu.org." >&2;}
-+ac_tool_warned=yes ;;
-+esac
-+ CC=$ac_ct_CC
-+ fi
- else
- CC="$ac_cv_prog_CC"
- fi
-
- if test -z "$CC"; then
-- if test -n "$ac_tool_prefix"; then
-- # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
-+ if test -n "$ac_tool_prefix"; then
-+ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
- set dummy ${ac_tool_prefix}cc; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
- if test "${ac_cv_prog_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -1524,74 +1998,34 @@
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_CC="${ac_tool_prefix}cc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
- done
-+IFS=$as_save_IFS
-
- fi
- fi
- CC=$ac_cv_prog_CC
- if test -n "$CC"; then
-- echo "$as_me:$LINENO: result: $CC" >&5
--echo "${ECHO_T}$CC" >&6
--else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
--fi
--
--fi
--if test -z "$ac_cv_prog_CC"; then
-- ac_ct_CC=$CC
-- # Extract the first word of "cc", so it can be a program name with args.
--set dummy cc; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
--if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
--else
-- if test -n "$ac_ct_CC"; then
-- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
--else
--as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
--for as_dir in $PATH
--do
-- IFS=$as_save_IFS
-- test -z "$as_dir" && as_dir=.
-- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-- ac_cv_prog_ac_ct_CC="cc"
-- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-- break 2
-- fi
--done
--done
--
--fi
--fi
--ac_ct_CC=$ac_cv_prog_ac_ct_CC
--if test -n "$ac_ct_CC"; then
-- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
--echo "${ECHO_T}$ac_ct_CC" >&6
-+ { echo "$as_me:$LINENO: result: $CC" >&5
-+echo "${ECHO_T}$CC" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
- fi
-
-- CC=$ac_ct_CC
--else
-- CC="$ac_cv_prog_CC"
--fi
-
-+ fi
- fi
- if test -z "$CC"; then
- # Extract the first word of "cc", so it can be a program name with args.
- set dummy cc; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
- if test "${ac_cv_prog_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -1605,7 +2039,7 @@
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
- ac_prog_rejected=yes
- continue
-@@ -1616,6 +2050,7 @@
- fi
- done
- done
-+IFS=$as_save_IFS
-
- if test $ac_prog_rejected = yes; then
- # We found a bogon in the path, so make sure we never use it.
-@@ -1633,22 +2068,23 @@
- fi
- CC=$ac_cv_prog_CC
- if test -n "$CC"; then
-- echo "$as_me:$LINENO: result: $CC" >&5
--echo "${ECHO_T}$CC" >&6
-+ { echo "$as_me:$LINENO: result: $CC" >&5
-+echo "${ECHO_T}$CC" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
- fi
-
-+
- fi
- if test -z "$CC"; then
- if test -n "$ac_tool_prefix"; then
-- for ac_prog in cl
-+ for ac_prog in cl.exe
- do
- # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
- set dummy $ac_tool_prefix$ac_prog; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
- if test "${ac_cv_prog_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -1661,36 +2097,38 @@
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
- done
-+IFS=$as_save_IFS
-
- fi
- fi
- CC=$ac_cv_prog_CC
- if test -n "$CC"; then
-- echo "$as_me:$LINENO: result: $CC" >&5
--echo "${ECHO_T}$CC" >&6
-+ { echo "$as_me:$LINENO: result: $CC" >&5
-+echo "${ECHO_T}$CC" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
- fi
-
-+
- test -n "$CC" && break
- done
- fi
- if test -z "$CC"; then
- ac_ct_CC=$CC
-- for ac_prog in cl
-+ for ac_prog in cl.exe
- do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
- set dummy $ac_prog; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
- if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -1703,29 +2141,45 @@
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_CC="$ac_prog"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
- done
-+IFS=$as_save_IFS
-
- fi
- fi
- ac_ct_CC=$ac_cv_prog_ac_ct_CC
- if test -n "$ac_ct_CC"; then
-- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
--echo "${ECHO_T}$ac_ct_CC" >&6
-+ { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-+echo "${ECHO_T}$ac_ct_CC" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
- fi
-
-+
- test -n "$ac_ct_CC" && break
- done
-
-- CC=$ac_ct_CC
-+ if test "x$ac_ct_CC" = x; then
-+ CC=""
-+ else
-+ case $cross_compiling:$ac_tool_warned in
-+yes:)
-+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf at gnu.org." >&5
-+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf at gnu.org." >&2;}
-+ac_tool_warned=yes ;;
-+esac
-+ CC=$ac_ct_CC
-+ fi
- fi
-
- fi
-@@ -1738,21 +2192,35 @@
- { (exit 1); exit 1; }; }
-
- # Provide some information about the compiler.
--echo "$as_me:$LINENO:" \
-- "checking for C compiler version" >&5
-+echo "$as_me:$LINENO: checking for C compiler version" >&5
- ac_compiler=`set X $ac_compile; echo $2`
--{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
-- (eval $ac_compiler --version </dev/null >&5) 2>&5
-+{ (ac_try="$ac_compiler --version >&5"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compiler --version >&5") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
--{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5
-- (eval $ac_compiler -v </dev/null >&5) 2>&5
-+{ (ac_try="$ac_compiler -v >&5"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compiler -v >&5") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
--{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5
-- (eval $ac_compiler -V </dev/null >&5) 2>&5
-+{ (ac_try="$ac_compiler -V >&5"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compiler -V >&5") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-@@ -1777,47 +2245,77 @@
- # Try to create an executable without -o first, disregard a.out.
- # It will help us diagnose broken compilers, and finding out an intuition
- # of exeext.
--echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
--echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
-+echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6; }
- ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
--if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5
-- (eval $ac_link_default) 2>&5
-+#
-+# List of possible output files, starting from the most likely.
-+# The algorithm is not robust to junk in `.', hence go to wildcards (a.*)
-+# only as a last resort. b.out is created by i960 compilers.
-+ac_files='a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out'
-+#
-+# The IRIX 6 linker writes into existing files which may not be
-+# executable, retaining their permissions. Remove them first so a
-+# subsequent execution test works.
-+ac_rmfiles=
-+for ac_file in $ac_files
-+do
-+ case $ac_file in
-+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;;
-+ * ) ac_rmfiles="$ac_rmfiles $ac_file";;
-+ esac
-+done
-+rm -f $ac_rmfiles
-+
-+if { (ac_try="$ac_link_default"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_link_default") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
-- # Find the output, starting from the most likely. This scheme is
--# not robust to junk in `.', hence go to wildcards (a.*) only as a last
--# resort.
--
--# Be careful to initialize this variable, since it used to be cached.
--# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile.
--ac_cv_exeext=
--# b.out is created by i960 compilers.
--for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out
-+ # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
-+# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
-+# in a Makefile. We should not override ac_cv_exeext if it was cached,
-+# so that the user can short-circuit this test for compilers unknown to
-+# Autoconf.
-+for ac_file in $ac_files ''
- do
- test -f "$ac_file" || continue
- case $ac_file in
-- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj )
-- ;;
-- conftest.$ac_ext )
-- # This is the source file.
-+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj )
- ;;
- [ab].out )
- # We found the default executable, but exeext='' is most
- # certainly right.
- break;;
- *.* )
-- ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
-- # FIXME: I believe we export ac_cv_exeext for Libtool,
-- # but it would be cool to find out if it's true. Does anybody
-- # maintain Libtool? --akim.
-- export ac_cv_exeext
-+ if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
-+ then :; else
-+ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
-+ fi
-+ # We set ac_cv_exeext here because the later test for it is not
-+ # safe: cross compilers may not add the suffix if given an `-o'
-+ # argument, so we may need to know it at that point already.
-+ # Even if this section looks crufty: it has the advantage of
-+ # actually working.
- break;;
- * )
- break;;
- esac
- done
-+test "$ac_cv_exeext" = no && ac_cv_exeext=
-+
- else
-+ ac_file=''
-+fi
-+
-+{ echo "$as_me:$LINENO: result: $ac_file" >&5
-+echo "${ECHO_T}$ac_file" >&6; }
-+if test -z "$ac_file"; then
- echo "$as_me: failed program was:" >&5
- sed 's/^/| /' conftest.$ac_ext >&5
-
-@@ -1829,19 +2327,21 @@
- fi
-
- ac_exeext=$ac_cv_exeext
--echo "$as_me:$LINENO: result: $ac_file" >&5
--echo "${ECHO_T}$ac_file" >&6
-
--# Check the compiler produces executables we can run. If not, either
-+# Check that the compiler produces executables we can run. If not, either
- # the compiler is broken, or we cross compile.
--echo "$as_me:$LINENO: checking whether the C compiler works" >&5
--echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking whether the C compiler works" >&5
-+echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6; }
- # FIXME: These cross compiler hacks should be removed for Autoconf 3.0
- # If not cross compiling, check that we can run a simple program.
- if test "$cross_compiling" != yes; then
- if { ac_try='./$ac_file'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-+ { (case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
-@@ -1860,22 +2360,27 @@
- fi
- fi
- fi
--echo "$as_me:$LINENO: result: yes" >&5
--echo "${ECHO_T}yes" >&6
-+{ echo "$as_me:$LINENO: result: yes" >&5
-+echo "${ECHO_T}yes" >&6; }
-
- rm -f a.out a.exe conftest$ac_cv_exeext b.out
- ac_clean_files=$ac_clean_files_save
--# Check the compiler produces executables we can run. If not, either
-+# Check that the compiler produces executables we can run. If not, either
- # the compiler is broken, or we cross compile.
--echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
--echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6
--echo "$as_me:$LINENO: result: $cross_compiling" >&5
--echo "${ECHO_T}$cross_compiling" >&6
--
--echo "$as_me:$LINENO: checking for suffix of executables" >&5
--echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6
--if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-- (eval $ac_link) 2>&5
-+{ echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
-+echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6; }
-+{ echo "$as_me:$LINENO: result: $cross_compiling" >&5
-+echo "${ECHO_T}$cross_compiling" >&6; }
-+
-+{ echo "$as_me:$LINENO: checking for suffix of executables" >&5
-+echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6; }
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_link") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
-@@ -1886,9 +2391,8 @@
- for ac_file in conftest.exe conftest conftest.*; do
- test -f "$ac_file" || continue
- case $ac_file in
-- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;;
-+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;;
- *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
-- export ac_cv_exeext
- break;;
- * ) break;;
- esac
-@@ -1902,14 +2406,14 @@
- fi
-
- rm -f conftest$ac_cv_exeext
--echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
--echo "${ECHO_T}$ac_cv_exeext" >&6
-+{ echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
-+echo "${ECHO_T}$ac_cv_exeext" >&6; }
-
- rm -f conftest.$ac_ext
- EXEEXT=$ac_cv_exeext
- ac_exeext=$EXEEXT
--echo "$as_me:$LINENO: checking for suffix of object files" >&5
--echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for suffix of object files" >&5
-+echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6; }
- if test "${ac_cv_objext+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -1929,14 +2433,20 @@
- }
- _ACEOF
- rm -f conftest.o conftest.obj
--if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-- (eval $ac_compile) 2>&5
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compile") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
-- for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do
-+ for ac_file in conftest.o conftest.obj conftest.*; do
-+ test -f "$ac_file" || continue;
- case $ac_file in
-- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;;
-+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf ) ;;
- *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
- break;;
- esac
-@@ -1954,12 +2464,12 @@
-
- rm -f conftest.$ac_cv_objext conftest.$ac_ext
- fi
--echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
--echo "${ECHO_T}$ac_cv_objext" >&6
-+{ echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
-+echo "${ECHO_T}$ac_cv_objext" >&6; }
- OBJEXT=$ac_cv_objext
- ac_objext=$OBJEXT
--echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
--echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
-+echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; }
- if test "${ac_cv_c_compiler_gnu+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -1982,50 +2492,49 @@
- }
- _ACEOF
- rm -f conftest.$ac_objext
--if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-- (eval $ac_compile) 2>conftest.er1
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; } &&
-- { ac_try='test -s conftest.$ac_objext'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; }; then
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest.$ac_objext; then
- ac_compiler_gnu=yes
- else
- echo "$as_me: failed program was:" >&5
- sed 's/^/| /' conftest.$ac_ext >&5
-
--ac_compiler_gnu=no
-+ ac_compiler_gnu=no
- fi
--rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- ac_cv_c_compiler_gnu=$ac_compiler_gnu
-
- fi
--echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
--echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6
-+{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
-+echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; }
- GCC=`test $ac_compiler_gnu = yes && echo yes`
- ac_test_CFLAGS=${CFLAGS+set}
- ac_save_CFLAGS=$CFLAGS
--CFLAGS="-g"
--echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
--echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
-+echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; }
- if test "${ac_cv_prog_cc_g+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- cat >conftest.$ac_ext <<_ACEOF
-+ ac_save_c_werror_flag=$ac_c_werror_flag
-+ ac_c_werror_flag=yes
-+ ac_cv_prog_cc_g=no
-+ CFLAGS="-g"
-+ cat >conftest.$ac_ext <<_ACEOF
- /* confdefs.h. */
- _ACEOF
- cat confdefs.h >>conftest.$ac_ext
-@@ -2041,38 +2550,118 @@
- }
- _ACEOF
- rm -f conftest.$ac_objext
--if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-- (eval $ac_compile) 2>conftest.er1
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest.$ac_objext; then
-+ ac_cv_prog_cc_g=yes
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ CFLAGS=""
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; } &&
-- { ac_try='test -s conftest.$ac_objext'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest.$ac_objext; then
-+ :
-+else
-+ echo "$as_me: failed program was:" >&5
-+sed 's/^/| /' conftest.$ac_ext >&5
-+
-+ ac_c_werror_flag=$ac_save_c_werror_flag
-+ CFLAGS="-g"
-+ cat >conftest.$ac_ext <<_ACEOF
-+/* confdefs.h. */
-+_ACEOF
-+cat confdefs.h >>conftest.$ac_ext
-+cat >>conftest.$ac_ext <<_ACEOF
-+/* end confdefs.h. */
-+
-+int
-+main ()
-+{
-+
-+ ;
-+ return 0;
-+}
-+_ACEOF
-+rm -f conftest.$ac_objext
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
-+ grep -v '^ *+' conftest.er1 >conftest.err
-+ rm -f conftest.er1
-+ cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; }; then
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest.$ac_objext; then
- ac_cv_prog_cc_g=yes
- else
- echo "$as_me: failed program was:" >&5
- sed 's/^/| /' conftest.$ac_ext >&5
-
--ac_cv_prog_cc_g=no
-+
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- fi
--rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+fi
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+ ac_c_werror_flag=$ac_save_c_werror_flag
- fi
--echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
--echo "${ECHO_T}$ac_cv_prog_cc_g" >&6
-+{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
-+echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; }
- if test "$ac_test_CFLAGS" = set; then
- CFLAGS=$ac_save_CFLAGS
- elif test $ac_cv_prog_cc_g = yes; then
-@@ -2088,12 +2677,12 @@
- CFLAGS=
- fi
- fi
--echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5
--echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6
--if test "${ac_cv_prog_cc_stdc+set}" = set; then
-+{ echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5
-+echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; }
-+if test "${ac_cv_prog_cc_c89+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- ac_cv_prog_cc_stdc=no
-+ ac_cv_prog_cc_c89=no
- ac_save_CC=$CC
- cat >conftest.$ac_ext <<_ACEOF
- /* confdefs.h. */
-@@ -2127,12 +2716,17 @@
- /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
- function prototypes and stuff, but not '\xHH' hex character constants.
- These don't provoke an error unfortunately, instead are silently treated
-- as 'x'. The following induces an error, until -std1 is added to get
-+ as 'x'. The following induces an error, until -std is added to get
- proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
- array size at least. It's necessary to write '\x00'==0 to get something
-- that's true only with -std1. */
-+ that's true only with -std. */
- int osf4_cc_array ['\x00' == 0 ? 1 : -1];
-
-+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
-+ inside strings and character constants. */
-+#define FOO(x) 'x'
-+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
-+
- int test (int i, double x);
- struct s1 {int (*f) (int a);};
- struct s2 {int (*f) (double a);};
-@@ -2147,205 +2741,57 @@
- return 0;
- }
- _ACEOF
--# Don't try gcc -ansi; that turns off useful extensions and
--# breaks some systems' header files.
--# AIX -qlanglvl=ansi
--# Ultrix and OSF/1 -std1
--# HP-UX 10.20 and later -Ae
--# HP-UX older versions -Aa -D_HPUX_SOURCE
--# SVR4 -Xc -D__EXTENSIONS__
--for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
-+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
-+ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
- do
- CC="$ac_save_CC $ac_arg"
- rm -f conftest.$ac_objext
--if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-- (eval $ac_compile) 2>conftest.er1
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; } &&
-- { ac_try='test -s conftest.$ac_objext'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; }; then
-- ac_cv_prog_cc_stdc=$ac_arg
--break
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest.$ac_objext; then
-+ ac_cv_prog_cc_c89=$ac_arg
- else
- echo "$as_me: failed program was:" >&5
- sed 's/^/| /' conftest.$ac_ext >&5
-
-+
- fi
--rm -f conftest.err conftest.$ac_objext
-+
-+rm -f core conftest.err conftest.$ac_objext
-+ test "x$ac_cv_prog_cc_c89" != "xno" && break
- done
--rm -f conftest.$ac_ext conftest.$ac_objext
-+rm -f conftest.$ac_ext
- CC=$ac_save_CC
-
- fi
--
--case "x$ac_cv_prog_cc_stdc" in
-- x|xno)
-- echo "$as_me:$LINENO: result: none needed" >&5
--echo "${ECHO_T}none needed" >&6 ;;
-+# AC_CACHE_VAL
-+case "x$ac_cv_prog_cc_c89" in
-+ x)
-+ { echo "$as_me:$LINENO: result: none needed" >&5
-+echo "${ECHO_T}none needed" >&6; } ;;
-+ xno)
-+ { echo "$as_me:$LINENO: result: unsupported" >&5
-+echo "${ECHO_T}unsupported" >&6; } ;;
- *)
-- echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5
--echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6
-- CC="$CC $ac_cv_prog_cc_stdc" ;;
-+ CC="$CC $ac_cv_prog_cc_c89"
-+ { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5
-+echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;;
- esac
-
--# Some people use a C++ compiler to compile C. Since we use `exit',
--# in C++ we need to declare it. In case someone uses the same compiler
--# for both compiling C and C++ we need to have the C++ compiler decide
--# the declaration of exit, since it's the most demanding environment.
--cat >conftest.$ac_ext <<_ACEOF
--#ifndef __cplusplus
-- choke me
--#endif
--_ACEOF
--rm -f conftest.$ac_objext
--if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-- (eval $ac_compile) 2>conftest.er1
-- ac_status=$?
-- grep -v '^ *+' conftest.er1 >conftest.err
-- rm -f conftest.er1
-- cat conftest.err >&5
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; } &&
-- { ac_try='test -s conftest.$ac_objext'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; }; then
-- for ac_declaration in \
-- '' \
-- 'extern "C" void std::exit (int) throw (); using std::exit;' \
-- 'extern "C" void std::exit (int); using std::exit;' \
-- 'extern "C" void exit (int) throw ();' \
-- 'extern "C" void exit (int);' \
-- 'void exit (int);'
--do
-- cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h. */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
--/* end confdefs.h. */
--$ac_declaration
--#include <stdlib.h>
--int
--main ()
--{
--exit (42);
-- ;
-- return 0;
--}
--_ACEOF
--rm -f conftest.$ac_objext
--if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-- (eval $ac_compile) 2>conftest.er1
-- ac_status=$?
-- grep -v '^ *+' conftest.er1 >conftest.err
-- rm -f conftest.er1
-- cat conftest.err >&5
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; } &&
-- { ac_try='test -s conftest.$ac_objext'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; }; then
-- :
--else
-- echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
-
--continue
--fi
--rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-- cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h. */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
--/* end confdefs.h. */
--$ac_declaration
--int
--main ()
--{
--exit (42);
-- ;
-- return 0;
--}
--_ACEOF
--rm -f conftest.$ac_objext
--if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-- (eval $ac_compile) 2>conftest.er1
-- ac_status=$?
-- grep -v '^ *+' conftest.er1 >conftest.err
-- rm -f conftest.er1
-- cat conftest.err >&5
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; } &&
-- { ac_try='test -s conftest.$ac_objext'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; }; then
-- break
--else
-- echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
--
--fi
--rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
--done
--rm -f conftest*
--if test -n "$ac_declaration"; then
-- echo '#ifdef __cplusplus' >>confdefs.h
-- echo $ac_declaration >>confdefs.h
-- echo '#endif' >>confdefs.h
--fi
--
--else
-- echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
--
--fi
--rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
- ac_ext=c
- ac_cpp='$CPP $CPPFLAGS'
- ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-@@ -2356,8 +2802,8 @@
-
- # Extract the first word of "mkdir", so it can be a program name with args.
- set dummy mkdir; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
- if test "${ac_cv_prog_MKDIR+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -2370,29 +2816,31 @@
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_MKDIR="mkdir"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
- done
-+IFS=$as_save_IFS
-
- fi
- fi
- MKDIR=$ac_cv_prog_MKDIR
- if test -n "$MKDIR"; then
-- echo "$as_me:$LINENO: result: $MKDIR" >&5
--echo "${ECHO_T}$MKDIR" >&6
-+ { echo "$as_me:$LINENO: result: $MKDIR" >&5
-+echo "${ECHO_T}$MKDIR" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
- fi
-
-+
- # Extract the first word of "rm", so it can be a program name with args.
- set dummy rm; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
- if test "${ac_cv_prog_RM+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -2405,29 +2853,31 @@
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_RM="rm"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
- done
-+IFS=$as_save_IFS
-
- fi
- fi
- RM=$ac_cv_prog_RM
- if test -n "$RM"; then
-- echo "$as_me:$LINENO: result: $RM" >&5
--echo "${ECHO_T}$RM" >&6
-+ { echo "$as_me:$LINENO: result: $RM" >&5
-+echo "${ECHO_T}$RM" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
- fi
-
-+
- # Extract the first word of "cp", so it can be a program name with args.
- set dummy cp; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
- if test "${ac_cv_prog_CP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -2440,29 +2890,31 @@
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_CP="cp"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
- done
-+IFS=$as_save_IFS
-
- fi
- fi
- CP=$ac_cv_prog_CP
- if test -n "$CP"; then
-- echo "$as_me:$LINENO: result: $CP" >&5
--echo "${ECHO_T}$CP" >&6
-+ { echo "$as_me:$LINENO: result: $CP" >&5
-+echo "${ECHO_T}$CP" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
- fi
-
-+
- # Extract the first word of "ln", so it can be a program name with args.
- set dummy ln; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
- if test "${ac_cv_prog_LN+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -2475,29 +2927,31 @@
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_LN="ln"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
- done
-+IFS=$as_save_IFS
-
- fi
- fi
- LN=$ac_cv_prog_LN
- if test -n "$LN"; then
-- echo "$as_me:$LINENO: result: $LN" >&5
--echo "${ECHO_T}$LN" >&6
-+ { echo "$as_me:$LINENO: result: $LN" >&5
-+echo "${ECHO_T}$LN" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
- fi
-
-+
- # Extract the first word of "tar", so it can be a program name with args.
- set dummy tar; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
- if test "${ac_cv_prog_TAR+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -2510,29 +2964,31 @@
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_TAR="tar"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
- done
-+IFS=$as_save_IFS
-
- fi
- fi
- TAR=$ac_cv_prog_TAR
- if test -n "$TAR"; then
-- echo "$as_me:$LINENO: result: $TAR" >&5
--echo "${ECHO_T}$TAR" >&6
-+ { echo "$as_me:$LINENO: result: $TAR" >&5
-+echo "${ECHO_T}$TAR" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
- fi
-
-+
- # Extract the first word of "rpm", so it can be a program name with args.
- set dummy rpm; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
- if test "${ac_cv_prog_RPM+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -2545,29 +3001,31 @@
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_RPM="rpm"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
- done
-+IFS=$as_save_IFS
-
- fi
- fi
- RPM=$ac_cv_prog_RPM
- if test -n "$RPM"; then
-- echo "$as_me:$LINENO: result: $RPM" >&5
--echo "${ECHO_T}$RPM" >&6
-+ { echo "$as_me:$LINENO: result: $RPM" >&5
-+echo "${ECHO_T}$RPM" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
- fi
-
-+
- # Extract the first word of "sed", so it can be a program name with args.
- set dummy sed; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
- if test "${ac_cv_prog_SED+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -2580,29 +3038,31 @@
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_SED="sed"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
- done
-+IFS=$as_save_IFS
-
- fi
- fi
- SED=$ac_cv_prog_SED
- if test -n "$SED"; then
-- echo "$as_me:$LINENO: result: $SED" >&5
--echo "${ECHO_T}$SED" >&6
-+ { echo "$as_me:$LINENO: result: $SED" >&5
-+echo "${ECHO_T}$SED" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
- fi
-
-+
- # Extract the first word of "find", so it can be a program name with args.
- set dummy find; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
- if test "${ac_cv_prog_FIND+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -2615,33 +3075,35 @@
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_FIND="find"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
- done
-+IFS=$as_save_IFS
-
- fi
- fi
- FIND=$ac_cv_prog_FIND
- if test -n "$FIND"; then
-- echo "$as_me:$LINENO: result: $FIND" >&5
--echo "${ECHO_T}$FIND" >&6
-+ { echo "$as_me:$LINENO: result: $FIND" >&5
-+echo "${ECHO_T}$FIND" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
- fi
-
-
-+
- ac_ext=c
- ac_cpp='$CPP $CPPFLAGS'
- ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
- ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
- ac_compiler_gnu=$ac_cv_c_compiler_gnu
--echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
--echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
-+echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6; }
- # On Suns, sometimes $CPP names a directory.
- if test -n "$CPP" && test -d "$CPP"; then
- CPP=
-@@ -2675,24 +3137,22 @@
- #endif
- Syntax error
- _ACEOF
--if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+if { (ac_try="$ac_cpp conftest.$ac_ext"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } >/dev/null; then
-- if test -s conftest.err; then
-- ac_cpp_err=$ac_c_preproc_warn_flag
-- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-- else
-- ac_cpp_err=
-- fi
--else
-- ac_cpp_err=yes
--fi
--if test -z "$ac_cpp_err"; then
-+ (exit $ac_status); } >/dev/null && {
-+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ }; then
- :
- else
- echo "$as_me: failed program was:" >&5
-@@ -2701,9 +3161,10 @@
- # Broken: fails on valid input.
- continue
- fi
-+
- rm -f conftest.err conftest.$ac_ext
-
-- # OK, works on sane cases. Now check whether non-existent headers
-+ # OK, works on sane cases. Now check whether nonexistent headers
- # can be detected and how.
- cat >conftest.$ac_ext <<_ACEOF
- /* confdefs.h. */
-@@ -2713,24 +3174,22 @@
- /* end confdefs.h. */
- #include <ac_nonexistent.h>
- _ACEOF
--if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+if { (ac_try="$ac_cpp conftest.$ac_ext"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } >/dev/null; then
-- if test -s conftest.err; then
-- ac_cpp_err=$ac_c_preproc_warn_flag
-- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-- else
-- ac_cpp_err=
-- fi
--else
-- ac_cpp_err=yes
--fi
--if test -z "$ac_cpp_err"; then
-+ (exit $ac_status); } >/dev/null && {
-+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ }; then
- # Broken: success on invalid input.
- continue
- else
-@@ -2741,6 +3200,7 @@
- ac_preproc_ok=:
- break
- fi
-+
- rm -f conftest.err conftest.$ac_ext
-
- done
-@@ -2758,8 +3218,8 @@
- else
- ac_cv_prog_CPP=$CPP
- fi
--echo "$as_me:$LINENO: result: $CPP" >&5
--echo "${ECHO_T}$CPP" >&6
-+{ echo "$as_me:$LINENO: result: $CPP" >&5
-+echo "${ECHO_T}$CPP" >&6; }
- ac_preproc_ok=false
- for ac_c_preproc_warn_flag in '' yes
- do
-@@ -2782,24 +3242,22 @@
- #endif
- Syntax error
- _ACEOF
--if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+if { (ac_try="$ac_cpp conftest.$ac_ext"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } >/dev/null; then
-- if test -s conftest.err; then
-- ac_cpp_err=$ac_c_preproc_warn_flag
-- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-- else
-- ac_cpp_err=
-- fi
--else
-- ac_cpp_err=yes
--fi
--if test -z "$ac_cpp_err"; then
-+ (exit $ac_status); } >/dev/null && {
-+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ }; then
- :
- else
- echo "$as_me: failed program was:" >&5
-@@ -2808,9 +3266,10 @@
- # Broken: fails on valid input.
- continue
- fi
-+
- rm -f conftest.err conftest.$ac_ext
-
-- # OK, works on sane cases. Now check whether non-existent headers
-+ # OK, works on sane cases. Now check whether nonexistent headers
- # can be detected and how.
- cat >conftest.$ac_ext <<_ACEOF
- /* confdefs.h. */
-@@ -2820,24 +3279,22 @@
- /* end confdefs.h. */
- #include <ac_nonexistent.h>
- _ACEOF
--if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+if { (ac_try="$ac_cpp conftest.$ac_ext"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } >/dev/null; then
-- if test -s conftest.err; then
-- ac_cpp_err=$ac_c_preproc_warn_flag
-- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-- else
-- ac_cpp_err=
-- fi
--else
-- ac_cpp_err=yes
--fi
--if test -z "$ac_cpp_err"; then
-+ (exit $ac_status); } >/dev/null && {
-+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ }; then
- # Broken: success on invalid input.
- continue
- else
-@@ -2848,6 +3305,7 @@
- ac_preproc_ok=:
- break
- fi
-+
- rm -f conftest.err conftest.$ac_ext
-
- done
-@@ -2870,23 +3328,170 @@
- ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
--echo "$as_me:$LINENO: checking for egrep" >&5
--echo $ECHO_N "checking for egrep... $ECHO_C" >&6
--if test "${ac_cv_prog_egrep+set}" = set; then
-+{ echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5
-+echo $ECHO_N "checking for grep that handles long lines and -e... $ECHO_C" >&6; }
-+if test "${ac_cv_path_GREP+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ # Extract the first word of "grep ggrep" to use in msg output
-+if test -z "$GREP"; then
-+set dummy grep ggrep; ac_prog_name=$2
-+if test "${ac_cv_path_GREP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-- if echo a | (grep -E '(a|b)') >/dev/null 2>&1
-- then ac_cv_prog_egrep='grep -E'
-- else ac_cv_prog_egrep='egrep'
-+ ac_path_GREP_found=false
-+# Loop through the user's path and test for each of PROGNAME-LIST
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_prog in grep ggrep; do
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
-+ { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
-+ # Check for GNU ac_path_GREP and select it if it is found.
-+ # Check for GNU $ac_path_GREP
-+case `"$ac_path_GREP" --version 2>&1` in
-+*GNU*)
-+ ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
-+*)
-+ ac_count=0
-+ echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
-+ while :
-+ do
-+ cat "conftest.in" "conftest.in" >"conftest.tmp"
-+ mv "conftest.tmp" "conftest.in"
-+ cp "conftest.in" "conftest.nl"
-+ echo 'GREP' >> "conftest.nl"
-+ "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
-+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
-+ ac_count=`expr $ac_count + 1`
-+ if test $ac_count -gt ${ac_path_GREP_max-0}; then
-+ # Best one so far, save it but keep looking for a better one
-+ ac_cv_path_GREP="$ac_path_GREP"
-+ ac_path_GREP_max=$ac_count
- fi
-+ # 10*(2^10) chars as input seems more than enough
-+ test $ac_count -gt 10 && break
-+ done
-+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-+esac
-+
-+
-+ $ac_path_GREP_found && break 3
-+ done
-+done
-+
-+done
-+IFS=$as_save_IFS
-+
-+
- fi
--echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5
--echo "${ECHO_T}$ac_cv_prog_egrep" >&6
-- EGREP=$ac_cv_prog_egrep
-
-+GREP="$ac_cv_path_GREP"
-+if test -z "$GREP"; then
-+ { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
-+echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
-+ { (exit 1); exit 1; }; }
-+fi
-+
-+else
-+ ac_cv_path_GREP=$GREP
-+fi
-+
-+
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5
-+echo "${ECHO_T}$ac_cv_path_GREP" >&6; }
-+ GREP="$ac_cv_path_GREP"
-+
-+
-+{ echo "$as_me:$LINENO: checking for egrep" >&5
-+echo $ECHO_N "checking for egrep... $ECHO_C" >&6; }
-+if test "${ac_cv_path_EGREP+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
-+ then ac_cv_path_EGREP="$GREP -E"
-+ else
-+ # Extract the first word of "egrep" to use in msg output
-+if test -z "$EGREP"; then
-+set dummy egrep; ac_prog_name=$2
-+if test "${ac_cv_path_EGREP+set}" = set; then
-+ echo $ECHO_N "(cached) $ECHO_C" >&6
-+else
-+ ac_path_EGREP_found=false
-+# Loop through the user's path and test for each of PROGNAME-LIST
-+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_prog in egrep; do
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
-+ { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
-+ # Check for GNU ac_path_EGREP and select it if it is found.
-+ # Check for GNU $ac_path_EGREP
-+case `"$ac_path_EGREP" --version 2>&1` in
-+*GNU*)
-+ ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
-+*)
-+ ac_count=0
-+ echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
-+ while :
-+ do
-+ cat "conftest.in" "conftest.in" >"conftest.tmp"
-+ mv "conftest.tmp" "conftest.in"
-+ cp "conftest.in" "conftest.nl"
-+ echo 'EGREP' >> "conftest.nl"
-+ "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
-+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
-+ ac_count=`expr $ac_count + 1`
-+ if test $ac_count -gt ${ac_path_EGREP_max-0}; then
-+ # Best one so far, save it but keep looking for a better one
-+ ac_cv_path_EGREP="$ac_path_EGREP"
-+ ac_path_EGREP_max=$ac_count
-+ fi
-+ # 10*(2^10) chars as input seems more than enough
-+ test $ac_count -gt 10 && break
-+ done
-+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-+esac
-+
-+
-+ $ac_path_EGREP_found && break 3
-+ done
-+done
-+
-+done
-+IFS=$as_save_IFS
-+
-+
-+fi
-+
-+EGREP="$ac_cv_path_EGREP"
-+if test -z "$EGREP"; then
-+ { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
-+echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
-+ { (exit 1); exit 1; }; }
-+fi
-+
-+else
-+ ac_cv_path_EGREP=$EGREP
-+fi
-
--echo "$as_me:$LINENO: checking for ANSI C header files" >&5
--echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6
-+
-+ fi
-+fi
-+{ echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5
-+echo "${ECHO_T}$ac_cv_path_EGREP" >&6; }
-+ EGREP="$ac_cv_path_EGREP"
-+
-+
-+{ echo "$as_me:$LINENO: checking for ANSI C header files" >&5
-+echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6; }
- if test "${ac_cv_header_stdc+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -2910,35 +3515,31 @@
- }
- _ACEOF
- rm -f conftest.$ac_objext
--if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-- (eval $ac_compile) 2>conftest.er1
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; } &&
-- { ac_try='test -s conftest.$ac_objext'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; }; then
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest.$ac_objext; then
- ac_cv_header_stdc=yes
- else
- echo "$as_me: failed program was:" >&5
- sed 's/^/| /' conftest.$ac_ext >&5
-
--ac_cv_header_stdc=no
-+ ac_cv_header_stdc=no
- fi
--rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
- if test $ac_cv_header_stdc = yes; then
- # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
-@@ -2994,6 +3595,7 @@
- cat >>conftest.$ac_ext <<_ACEOF
- /* end confdefs.h. */
- #include <ctype.h>
-+#include <stdlib.h>
- #if ((' ' & 0x0FF) == 0x020)
- # define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
- # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
-@@ -3013,18 +3615,27 @@
- for (i = 0; i < 256; i++)
- if (XOR (islower (i), ISLOWER (i))
- || toupper (i) != TOUPPER (i))
-- exit(2);
-- exit (0);
-+ return 2;
-+ return 0;
- }
- _ACEOF
- rm -f conftest$ac_exeext
--if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-- (eval $ac_link) 2>&5
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_link") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-+ { (case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_try") 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
-@@ -3037,12 +3648,14 @@
- ( exit $ac_status )
- ac_cv_header_stdc=no
- fi
--rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
- fi
-+
-+
- fi
- fi
--echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
--echo "${ECHO_T}$ac_cv_header_stdc" >&6
-+{ echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
-+echo "${ECHO_T}$ac_cv_header_stdc" >&6; }
- if test $ac_cv_header_stdc = yes; then
-
- cat >>confdefs.h <<\_ACEOF
-@@ -3065,9 +3678,9 @@
- inttypes.h stdint.h unistd.h
- do
- as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
--echo "$as_me:$LINENO: checking for $ac_header" >&5
--echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
--if eval "test \"\${$as_ac_Header+set}\" = set"; then
-+{ echo "$as_me:$LINENO: checking for $ac_header" >&5
-+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
-+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
- cat >conftest.$ac_ext <<_ACEOF
-@@ -3081,38 +3694,35 @@
- #include <$ac_header>
- _ACEOF
- rm -f conftest.$ac_objext
--if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-- (eval $ac_compile) 2>conftest.er1
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; } &&
-- { ac_try='test -s conftest.$ac_objext'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; }; then
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest.$ac_objext; then
- eval "$as_ac_Header=yes"
- else
- echo "$as_me: failed program was:" >&5
- sed 's/^/| /' conftest.$ac_ext >&5
-
--eval "$as_ac_Header=no"
-+ eval "$as_ac_Header=no"
- fi
--rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- fi
--echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
--echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-+ac_res=`eval echo '${'$as_ac_Header'}'`
-+ { echo "$as_me:$LINENO: result: $ac_res" >&5
-+echo "${ECHO_T}$ac_res" >&6; }
- if test `eval echo '${'$as_ac_Header'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
- #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-@@ -3124,17 +3734,17 @@
-
-
- if test "${ac_cv_header_zlib_h+set}" = set; then
-- echo "$as_me:$LINENO: checking for zlib.h" >&5
--echo $ECHO_N "checking for zlib.h... $ECHO_C" >&6
-+ { echo "$as_me:$LINENO: checking for zlib.h" >&5
-+echo $ECHO_N "checking for zlib.h... $ECHO_C" >&6; }
- if test "${ac_cv_header_zlib_h+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- fi
--echo "$as_me:$LINENO: result: $ac_cv_header_zlib_h" >&5
--echo "${ECHO_T}$ac_cv_header_zlib_h" >&6
-+{ echo "$as_me:$LINENO: result: $ac_cv_header_zlib_h" >&5
-+echo "${ECHO_T}$ac_cv_header_zlib_h" >&6; }
- else
- # Is the header compilable?
--echo "$as_me:$LINENO: checking zlib.h usability" >&5
--echo $ECHO_N "checking zlib.h usability... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking zlib.h usability" >&5
-+echo $ECHO_N "checking zlib.h usability... $ECHO_C" >&6; }
- cat >conftest.$ac_ext <<_ACEOF
- /* confdefs.h. */
- _ACEOF
-@@ -3145,41 +3755,37 @@
- #include <zlib.h>
- _ACEOF
- rm -f conftest.$ac_objext
--if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-- (eval $ac_compile) 2>conftest.er1
-+if { (ac_try="$ac_compile"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; } &&
-- { ac_try='test -s conftest.$ac_objext'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; }; then
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest.$ac_objext; then
- ac_header_compiler=yes
- else
- echo "$as_me: failed program was:" >&5
- sed 's/^/| /' conftest.$ac_ext >&5
-
--ac_header_compiler=no
-+ ac_header_compiler=no
- fi
--rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
--echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
--echo "${ECHO_T}$ac_header_compiler" >&6
-+
-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-+{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-+echo "${ECHO_T}$ac_header_compiler" >&6; }
-
- # Is the header present?
--echo "$as_me:$LINENO: checking zlib.h presence" >&5
--echo $ECHO_N "checking zlib.h presence... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking zlib.h presence" >&5
-+echo $ECHO_N "checking zlib.h presence... $ECHO_C" >&6; }
- cat >conftest.$ac_ext <<_ACEOF
- /* confdefs.h. */
- _ACEOF
-@@ -3188,24 +3794,22 @@
- /* end confdefs.h. */
- #include <zlib.h>
- _ACEOF
--if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+if { (ac_try="$ac_cpp conftest.$ac_ext"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } >/dev/null; then
-- if test -s conftest.err; then
-- ac_cpp_err=$ac_c_preproc_warn_flag
-- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-- else
-- ac_cpp_err=
-- fi
--else
-- ac_cpp_err=yes
--fi
--if test -z "$ac_cpp_err"; then
-+ (exit $ac_status); } >/dev/null && {
-+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ }; then
- ac_header_preproc=yes
- else
- echo "$as_me: failed program was:" >&5
-@@ -3213,9 +3817,10 @@
-
- ac_header_preproc=no
- fi
-+
- rm -f conftest.err conftest.$ac_ext
--echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
--echo "${ECHO_T}$ac_header_preproc" >&6
-+{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-+echo "${ECHO_T}$ac_header_preproc" >&6; }
-
- # So? What about this header?
- case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-@@ -3239,30 +3844,23 @@
- echo "$as_me: WARNING: zlib.h: proceeding with the preprocessor's result" >&2;}
- { echo "$as_me:$LINENO: WARNING: zlib.h: in the future, the compiler will take precedence" >&5
- echo "$as_me: WARNING: zlib.h: in the future, the compiler will take precedence" >&2;}
-- (
-- cat <<\_ASBOX
--## ------------------------------------------ ##
--## Report this to the AC_PACKAGE_NAME lists. ##
--## ------------------------------------------ ##
--_ASBOX
-- ) |
-- sed "s/^/$as_me: WARNING: /" >&2
-+
- ;;
- esac
--echo "$as_me:$LINENO: checking for zlib.h" >&5
--echo $ECHO_N "checking for zlib.h... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for zlib.h" >&5
-+echo $ECHO_N "checking for zlib.h... $ECHO_C" >&6; }
- if test "${ac_cv_header_zlib_h+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
- ac_cv_header_zlib_h=$ac_header_preproc
- fi
--echo "$as_me:$LINENO: result: $ac_cv_header_zlib_h" >&5
--echo "${ECHO_T}$ac_cv_header_zlib_h" >&6
-+{ echo "$as_me:$LINENO: result: $ac_cv_header_zlib_h" >&5
-+echo "${ECHO_T}$ac_cv_header_zlib_h" >&6; }
-
- fi
- if test $ac_cv_header_zlib_h = yes; then
-- echo "$as_me:$LINENO: checking for inflateInit_ in -lz" >&5
--echo $ECHO_N "checking for inflateInit_ in -lz... $ECHO_C" >&6
-+ { echo "$as_me:$LINENO: checking for inflateInit_ in -lz" >&5
-+echo $ECHO_N "checking for inflateInit_ in -lz... $ECHO_C" >&6; }
- if test "${ac_cv_lib_z_inflateInit_+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -3276,56 +3874,53 @@
- cat >>conftest.$ac_ext <<_ACEOF
- /* end confdefs.h. */
-
--/* Override any gcc2 internal prototype to avoid an error. */
-+/* Override any GCC internal prototype to avoid an error.
-+ Use char because int might match the return type of a GCC
-+ builtin and then its argument prototype would still apply. */
- #ifdef __cplusplus
- extern "C"
- #endif
--/* We use char because int might match the return type of a gcc2
-- builtin and then its argument prototype would still apply. */
- char inflateInit_ ();
- int
- main ()
- {
--inflateInit_ ();
-+return inflateInit_ ();
- ;
- return 0;
- }
- _ACEOF
- rm -f conftest.$ac_objext conftest$ac_exeext
--if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-- (eval $ac_link) 2>conftest.er1
-+if { (ac_try="$ac_link"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; } &&
-- { ac_try='test -s conftest$ac_exeext'
-- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-- (eval $ac_try) 2>&5
-- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); }; }; then
-+ (exit $ac_status); } && {
-+ test -z "$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ } && test -s conftest$ac_exeext &&
-+ $as_test_x conftest$ac_exeext; then
- ac_cv_lib_z_inflateInit_=yes
- else
- echo "$as_me: failed program was:" >&5
- sed 's/^/| /' conftest.$ac_ext >&5
-
--ac_cv_lib_z_inflateInit_=no
-+ ac_cv_lib_z_inflateInit_=no
- fi
--rm -f conftest.err conftest.$ac_objext \
-+
-+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
- LIBS=$ac_check_lib_save_LIBS
- fi
--echo "$as_me:$LINENO: result: $ac_cv_lib_z_inflateInit_" >&5
--echo "${ECHO_T}$ac_cv_lib_z_inflateInit_" >&6
-+{ echo "$as_me:$LINENO: result: $ac_cv_lib_z_inflateInit_" >&5
-+echo "${ECHO_T}$ac_cv_lib_z_inflateInit_" >&6; }
- if test $ac_cv_lib_z_inflateInit_ = yes; then
- cat >>confdefs.h <<\_ACEOF
- #define HAVE_ZLIB_H 1
-@@ -3349,8 +3944,8 @@
- ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
- ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
- ac_compiler_gnu=$ac_cv_c_compiler_gnu
--echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
--echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
-+echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6; }
- # On Suns, sometimes $CPP names a directory.
- if test -n "$CPP" && test -d "$CPP"; then
- CPP=
-@@ -3384,24 +3979,22 @@
- #endif
- Syntax error
- _ACEOF
--if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+if { (ac_try="$ac_cpp conftest.$ac_ext"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } >/dev/null; then
-- if test -s conftest.err; then
-- ac_cpp_err=$ac_c_preproc_warn_flag
-- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-- else
-- ac_cpp_err=
-- fi
--else
-- ac_cpp_err=yes
--fi
--if test -z "$ac_cpp_err"; then
-+ (exit $ac_status); } >/dev/null && {
-+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ }; then
- :
- else
- echo "$as_me: failed program was:" >&5
-@@ -3410,9 +4003,10 @@
- # Broken: fails on valid input.
- continue
- fi
-+
- rm -f conftest.err conftest.$ac_ext
-
-- # OK, works on sane cases. Now check whether non-existent headers
-+ # OK, works on sane cases. Now check whether nonexistent headers
- # can be detected and how.
- cat >conftest.$ac_ext <<_ACEOF
- /* confdefs.h. */
-@@ -3422,24 +4016,22 @@
- /* end confdefs.h. */
- #include <ac_nonexistent.h>
- _ACEOF
--if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+if { (ac_try="$ac_cpp conftest.$ac_ext"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } >/dev/null; then
-- if test -s conftest.err; then
-- ac_cpp_err=$ac_c_preproc_warn_flag
-- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-- else
-- ac_cpp_err=
-- fi
--else
-- ac_cpp_err=yes
--fi
--if test -z "$ac_cpp_err"; then
-+ (exit $ac_status); } >/dev/null && {
-+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ }; then
- # Broken: success on invalid input.
- continue
- else
-@@ -3450,6 +4042,7 @@
- ac_preproc_ok=:
- break
- fi
-+
- rm -f conftest.err conftest.$ac_ext
-
- done
-@@ -3467,8 +4060,8 @@
- else
- ac_cv_prog_CPP=$CPP
- fi
--echo "$as_me:$LINENO: result: $CPP" >&5
--echo "${ECHO_T}$CPP" >&6
-+{ echo "$as_me:$LINENO: result: $CPP" >&5
-+echo "${ECHO_T}$CPP" >&6; }
- ac_preproc_ok=false
- for ac_c_preproc_warn_flag in '' yes
- do
-@@ -3491,24 +4084,22 @@
- #endif
- Syntax error
- _ACEOF
--if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+if { (ac_try="$ac_cpp conftest.$ac_ext"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } >/dev/null; then
-- if test -s conftest.err; then
-- ac_cpp_err=$ac_c_preproc_warn_flag
-- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-- else
-- ac_cpp_err=
-- fi
--else
-- ac_cpp_err=yes
--fi
--if test -z "$ac_cpp_err"; then
-+ (exit $ac_status); } >/dev/null && {
-+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ }; then
- :
- else
- echo "$as_me: failed program was:" >&5
-@@ -3517,9 +4108,10 @@
- # Broken: fails on valid input.
- continue
- fi
-+
- rm -f conftest.err conftest.$ac_ext
-
-- # OK, works on sane cases. Now check whether non-existent headers
-+ # OK, works on sane cases. Now check whether nonexistent headers
- # can be detected and how.
- cat >conftest.$ac_ext <<_ACEOF
- /* confdefs.h. */
-@@ -3529,24 +4121,22 @@
- /* end confdefs.h. */
- #include <ac_nonexistent.h>
- _ACEOF
--if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-+if { (ac_try="$ac_cpp conftest.$ac_ext"
-+case "(($ac_try" in
-+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-+ *) ac_try_echo=$ac_try;;
-+esac
-+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } >/dev/null; then
-- if test -s conftest.err; then
-- ac_cpp_err=$ac_c_preproc_warn_flag
-- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-- else
-- ac_cpp_err=
-- fi
--else
-- ac_cpp_err=yes
--fi
--if test -z "$ac_cpp_err"; then
-+ (exit $ac_status); } >/dev/null && {
-+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-+ test ! -s conftest.err
-+ }; then
- # Broken: success on invalid input.
- continue
- else
-@@ -3557,6 +4147,7 @@
- ac_preproc_ok=:
- break
- fi
-+
- rm -f conftest.err conftest.$ac_ext
-
- done
-@@ -3587,8 +4178,8 @@
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}ld", so it can be a program name with args.
- set dummy ${ac_tool_prefix}ld; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
- if test "${ac_cv_prog_LD+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -3601,32 +4192,34 @@
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_LD="${ac_tool_prefix}ld"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
- done
-+IFS=$as_save_IFS
-
- fi
- fi
- LD=$ac_cv_prog_LD
- if test -n "$LD"; then
-- echo "$as_me:$LINENO: result: $LD" >&5
--echo "${ECHO_T}$LD" >&6
-+ { echo "$as_me:$LINENO: result: $LD" >&5
-+echo "${ECHO_T}$LD" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
- fi
-
-+
- fi
- if test -z "$ac_cv_prog_LD"; then
- ac_ct_LD=$LD
- # Extract the first word of "ld", so it can be a program name with args.
- set dummy ld; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
- if test "${ac_cv_prog_ac_ct_LD+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -3639,27 +4232,41 @@
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_LD="ld"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
- done
-+IFS=$as_save_IFS
-
-- test -z "$ac_cv_prog_ac_ct_LD" && ac_cv_prog_ac_ct_LD="no"
- fi
- fi
- ac_ct_LD=$ac_cv_prog_ac_ct_LD
- if test -n "$ac_ct_LD"; then
-- echo "$as_me:$LINENO: result: $ac_ct_LD" >&5
--echo "${ECHO_T}$ac_ct_LD" >&6
-+ { echo "$as_me:$LINENO: result: $ac_ct_LD" >&5
-+echo "${ECHO_T}$ac_ct_LD" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
- fi
-
-- LD=$ac_ct_LD
-+ if test "x$ac_ct_LD" = x; then
-+ LD="no"
-+ else
-+ case $cross_compiling:$ac_tool_warned in
-+yes:)
-+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf at gnu.org." >&5
-+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf at gnu.org." >&2;}
-+ac_tool_warned=yes ;;
-+esac
-+ LD=$ac_ct_LD
-+ fi
- else
- LD="$ac_cv_prog_LD"
- fi
-@@ -3673,8 +4280,8 @@
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
- set dummy ${ac_tool_prefix}as; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
- if test "${ac_cv_prog_AS+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -3687,32 +4294,34 @@
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_AS="${ac_tool_prefix}as"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
- done
-+IFS=$as_save_IFS
-
- fi
- fi
- AS=$ac_cv_prog_AS
- if test -n "$AS"; then
-- echo "$as_me:$LINENO: result: $AS" >&5
--echo "${ECHO_T}$AS" >&6
-+ { echo "$as_me:$LINENO: result: $AS" >&5
-+echo "${ECHO_T}$AS" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
- fi
-
-+
- fi
- if test -z "$ac_cv_prog_AS"; then
- ac_ct_AS=$AS
- # Extract the first word of "as", so it can be a program name with args.
- set dummy as; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
- if test "${ac_cv_prog_ac_ct_AS+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -3725,27 +4334,41 @@
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_AS="as"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
- done
-+IFS=$as_save_IFS
-
-- test -z "$ac_cv_prog_ac_ct_AS" && ac_cv_prog_ac_ct_AS="no"
- fi
- fi
- ac_ct_AS=$ac_cv_prog_ac_ct_AS
- if test -n "$ac_ct_AS"; then
-- echo "$as_me:$LINENO: result: $ac_ct_AS" >&5
--echo "${ECHO_T}$ac_ct_AS" >&6
-+ { echo "$as_me:$LINENO: result: $ac_ct_AS" >&5
-+echo "${ECHO_T}$ac_ct_AS" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
- fi
-
-- AS=$ac_ct_AS
-+ if test "x$ac_ct_AS" = x; then
-+ AS="no"
-+ else
-+ case $cross_compiling:$ac_tool_warned in
-+yes:)
-+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf at gnu.org." >&5
-+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf at gnu.org." >&2;}
-+ac_tool_warned=yes ;;
-+esac
-+ AS=$ac_ct_AS
-+ fi
- else
- AS="$ac_cv_prog_AS"
- fi
-@@ -3759,8 +4382,8 @@
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}objcopy", so it can be a program name with args.
- set dummy ${ac_tool_prefix}objcopy; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
- if test "${ac_cv_prog_OBJCOPY+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -3773,32 +4396,34 @@
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_OBJCOPY="${ac_tool_prefix}objcopy"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
- done
-+IFS=$as_save_IFS
-
- fi
- fi
- OBJCOPY=$ac_cv_prog_OBJCOPY
- if test -n "$OBJCOPY"; then
-- echo "$as_me:$LINENO: result: $OBJCOPY" >&5
--echo "${ECHO_T}$OBJCOPY" >&6
-+ { echo "$as_me:$LINENO: result: $OBJCOPY" >&5
-+echo "${ECHO_T}$OBJCOPY" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
- fi
-
-+
- fi
- if test -z "$ac_cv_prog_OBJCOPY"; then
- ac_ct_OBJCOPY=$OBJCOPY
- # Extract the first word of "objcopy", so it can be a program name with args.
- set dummy objcopy; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
- if test "${ac_cv_prog_ac_ct_OBJCOPY+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -3811,27 +4436,41 @@
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_OBJCOPY="objcopy"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
- done
-+IFS=$as_save_IFS
-
-- test -z "$ac_cv_prog_ac_ct_OBJCOPY" && ac_cv_prog_ac_ct_OBJCOPY="no"
- fi
- fi
- ac_ct_OBJCOPY=$ac_cv_prog_ac_ct_OBJCOPY
- if test -n "$ac_ct_OBJCOPY"; then
-- echo "$as_me:$LINENO: result: $ac_ct_OBJCOPY" >&5
--echo "${ECHO_T}$ac_ct_OBJCOPY" >&6
-+ { echo "$as_me:$LINENO: result: $ac_ct_OBJCOPY" >&5
-+echo "${ECHO_T}$ac_ct_OBJCOPY" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
- fi
-
-- OBJCOPY=$ac_ct_OBJCOPY
-+ if test "x$ac_ct_OBJCOPY" = x; then
-+ OBJCOPY="no"
-+ else
-+ case $cross_compiling:$ac_tool_warned in
-+yes:)
-+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf at gnu.org." >&5
-+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-+whose name does not start with the host triplet. If you think this
-+configuration is useful to you, please write to autoconf at gnu.org." >&2;}
-+ac_tool_warned=yes ;;
-+esac
-+ OBJCOPY=$ac_ct_OBJCOPY
-+ fi
- else
- OBJCOPY="$ac_cv_prog_OBJCOPY"
- fi
-@@ -3862,8 +4501,8 @@
- fi
- # Extract the first word of "$cc", so it can be a program name with args.
- set dummy $cc; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
- if test "${ac_cv_prog_I386_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -3876,26 +4515,28 @@
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_I386_CC="$cc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
- done
-+IFS=$as_save_IFS
-
- test -z "$ac_cv_prog_I386_CC" && ac_cv_prog_I386_CC=""""
- fi
- fi
- I386_CC=$ac_cv_prog_I386_CC
- if test -n "$I386_CC"; then
-- echo "$as_me:$LINENO: result: $I386_CC" >&5
--echo "${ECHO_T}$I386_CC" >&6
-+ { echo "$as_me:$LINENO: result: $I386_CC" >&5
-+echo "${ECHO_T}$I386_CC" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
- fi
-
-+
- if test "$I386_CC" = no; then
-
- { { echo "$as_me:$LINENO: error: $cc not found" >&5
-@@ -3904,8 +4545,8 @@
- fi
- # Extract the first word of "$cpp", so it can be a program name with args.
- set dummy $cpp; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
- if test "${ac_cv_prog_I386_CPP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -3918,26 +4559,28 @@
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_I386_CPP="$cpp"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
- done
-+IFS=$as_save_IFS
-
- test -z "$ac_cv_prog_I386_CPP" && ac_cv_prog_I386_CPP=""""
- fi
- fi
- I386_CPP=$ac_cv_prog_I386_CPP
- if test -n "$I386_CPP"; then
-- echo "$as_me:$LINENO: result: $I386_CPP" >&5
--echo "${ECHO_T}$I386_CPP" >&6
-+ { echo "$as_me:$LINENO: result: $I386_CPP" >&5
-+echo "${ECHO_T}$I386_CPP" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
- fi
-
-+
- if test "$I386_CPP" = no; then
- { { echo "$as_me:$LINENO: error: $cpp not found" >&5
- echo "$as_me: error: $cpp not found" >&2;}
-@@ -3945,8 +4588,8 @@
- fi
- # Extract the first word of "$ld", so it can be a program name with args.
- set dummy $ld; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
- if test "${ac_cv_prog_I386_LD+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -3959,26 +4602,28 @@
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_I386_LD="$ld"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
- done
-+IFS=$as_save_IFS
-
- test -z "$ac_cv_prog_I386_LD" && ac_cv_prog_I386_LD=""""
- fi
- fi
- I386_LD=$ac_cv_prog_I386_LD
- if test -n "$I386_LD"; then
-- echo "$as_me:$LINENO: result: $I386_LD" >&5
--echo "${ECHO_T}$I386_LD" >&6
-+ { echo "$as_me:$LINENO: result: $I386_LD" >&5
-+echo "${ECHO_T}$I386_LD" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
- fi
-
-+
- if test "$I386_AS" = no; then
- { { echo "$as_me:$LINENO: error: $ld not found" >&5
- echo "$as_me: error: $ld not found" >&2;}
-@@ -3986,8 +4631,8 @@
- fi
- # Extract the first word of "$as", so it can be a program name with args.
- set dummy $as; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
- if test "${ac_cv_prog_I386_AS+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -4000,26 +4645,28 @@
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_I386_AS="$as"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
- done
-+IFS=$as_save_IFS
-
- test -z "$ac_cv_prog_I386_AS" && ac_cv_prog_I386_AS=""""
- fi
- fi
- I386_AS=$ac_cv_prog_I386_AS
- if test -n "$I386_AS"; then
-- echo "$as_me:$LINENO: result: $I386_AS" >&5
--echo "${ECHO_T}$I386_AS" >&6
-+ { echo "$as_me:$LINENO: result: $I386_AS" >&5
-+echo "${ECHO_T}$I386_AS" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
- fi
-
-+
- if test "$I386_AS" = no; then
- { { echo "$as_me:$LINENO: error: $as not found" >&5
- echo "$as_me: error: $as not found" >&2;}
-@@ -4027,8 +4674,8 @@
- fi
- # Extract the first word of "$objcopy", so it can be a program name with args.
- set dummy $objcopy; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
- if test "${ac_cv_prog_I386_OBJCOPY+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -4041,26 +4688,28 @@
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_I386_OBJCOPY="$objcopy"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
- done
-+IFS=$as_save_IFS
-
- test -z "$ac_cv_prog_I386_OBJCOPY" && ac_cv_prog_I386_OBJCOPY=""""
- fi
- fi
- I386_OBJCOPY=$ac_cv_prog_I386_OBJCOPY
- if test -n "$I386_OBJCOPY"; then
-- echo "$as_me:$LINENO: result: $I386_OBJCOPY" >&5
--echo "${ECHO_T}$I386_OBJCOPY" >&6
-+ { echo "$as_me:$LINENO: result: $I386_OBJCOPY" >&5
-+echo "${ECHO_T}$I386_OBJCOPY" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
- fi
-
-+
- if test "$I386_OBJCOPY" = no; then
- { { echo "$as_me:$LINENO: error: $objcopy not found" >&5
- echo "$as_me: error: $objcopy not found" >&2;}
-@@ -4083,8 +4732,8 @@
- fi
- # Extract the first word of "$cc", so it can be a program name with args.
- set dummy $cc; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
- if test "${ac_cv_prog_IA64_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -4097,26 +4746,28 @@
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_IA64_CC="$cc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
- done
-+IFS=$as_save_IFS
-
- test -z "$ac_cv_prog_IA64_CC" && ac_cv_prog_IA64_CC=""""
- fi
- fi
- IA64_CC=$ac_cv_prog_IA64_CC
- if test -n "$IA64_CC"; then
-- echo "$as_me:$LINENO: result: $IA64_CC" >&5
--echo "${ECHO_T}$IA64_CC" >&6
-+ { echo "$as_me:$LINENO: result: $IA64_CC" >&5
-+echo "${ECHO_T}$IA64_CC" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
- fi
-
-+
- if test "$IA64_CC" = no; then
-
- { { echo "$as_me:$LINENO: error: $cc not found" >&5
-@@ -4125,8 +4776,8 @@
- fi
- # Extract the first word of "$cpp", so it can be a program name with args.
- set dummy $cpp; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
- if test "${ac_cv_prog_IA64_CPP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -4139,26 +4790,28 @@
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_IA64_CPP="$cpp"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
- done
-+IFS=$as_save_IFS
-
- test -z "$ac_cv_prog_IA64_CPP" && ac_cv_prog_IA64_CPP=""""
- fi
- fi
- IA64_CPP=$ac_cv_prog_IA64_CPP
- if test -n "$IA64_CPP"; then
-- echo "$as_me:$LINENO: result: $IA64_CPP" >&5
--echo "${ECHO_T}$IA64_CPP" >&6
-+ { echo "$as_me:$LINENO: result: $IA64_CPP" >&5
-+echo "${ECHO_T}$IA64_CPP" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
- fi
-
-+
- if test "$IA64_CPP" = no; then
- { { echo "$as_me:$LINENO: error: $cpp not found" >&5
- echo "$as_me: error: $cpp not found" >&2;}
-@@ -4166,8 +4819,8 @@
- fi
- # Extract the first word of "$ld", so it can be a program name with args.
- set dummy $ld; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
- if test "${ac_cv_prog_IA64_LD+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -4180,26 +4833,28 @@
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_IA64_LD="$ld"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
- done
-+IFS=$as_save_IFS
-
- test -z "$ac_cv_prog_IA64_LD" && ac_cv_prog_IA64_LD=""""
- fi
- fi
- IA64_LD=$ac_cv_prog_IA64_LD
- if test -n "$IA64_LD"; then
-- echo "$as_me:$LINENO: result: $IA64_LD" >&5
--echo "${ECHO_T}$IA64_LD" >&6
-+ { echo "$as_me:$LINENO: result: $IA64_LD" >&5
-+echo "${ECHO_T}$IA64_LD" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
- fi
-
-+
- if test "$IA64_AS" = no; then
- { { echo "$as_me:$LINENO: error: $ld not found" >&5
- echo "$as_me: error: $ld not found" >&2;}
-@@ -4207,8 +4862,8 @@
- fi
- # Extract the first word of "$as", so it can be a program name with args.
- set dummy $as; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
- if test "${ac_cv_prog_IA64_AS+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -4221,26 +4876,28 @@
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_IA64_AS="$as"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
- done
-+IFS=$as_save_IFS
-
- test -z "$ac_cv_prog_IA64_AS" && ac_cv_prog_IA64_AS=""""
- fi
- fi
- IA64_AS=$ac_cv_prog_IA64_AS
- if test -n "$IA64_AS"; then
-- echo "$as_me:$LINENO: result: $IA64_AS" >&5
--echo "${ECHO_T}$IA64_AS" >&6
-+ { echo "$as_me:$LINENO: result: $IA64_AS" >&5
-+echo "${ECHO_T}$IA64_AS" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
- fi
-
-+
- if test "$IA64_AS" = no; then
- { { echo "$as_me:$LINENO: error: $as not found" >&5
- echo "$as_me: error: $as not found" >&2;}
-@@ -4248,8 +4905,8 @@
- fi
- # Extract the first word of "$objcopy", so it can be a program name with args.
- set dummy $objcopy; ac_word=$2
--echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
- if test "${ac_cv_prog_IA64_OBJCOPY+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-@@ -4262,26 +4919,28 @@
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
-- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_IA64_OBJCOPY="$objcopy"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
- done
-+IFS=$as_save_IFS
-
- test -z "$ac_cv_prog_IA64_OBJCOPY" && ac_cv_prog_IA64_OBJCOPY=""""
- fi
- fi
- IA64_OBJCOPY=$ac_cv_prog_IA64_OBJCOPY
- if test -n "$IA64_OBJCOPY"; then
-- echo "$as_me:$LINENO: result: $IA64_OBJCOPY" >&5
--echo "${ECHO_T}$IA64_OBJCOPY" >&6
-+ { echo "$as_me:$LINENO: result: $IA64_OBJCOPY" >&5
-+echo "${ECHO_T}$IA64_OBJCOPY" >&6; }
- else
-- echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6
-+ { echo "$as_me:$LINENO: result: no" >&5
-+echo "${ECHO_T}no" >&6; }
- fi
-
-+
- if test "$IA64_OBJCOPY" = no; then
- { { echo "$as_me:$LINENO: error: $objcopy not found" >&5
- echo "$as_me: error: $objcopy not found" >&2;}
-@@ -4292,13 +4951,13 @@
-
-
- HOST_CC=$CC
--HOST_CFLAGS='-O2 -Wall $(HOST_CPPFLAGS)'
-+HOST_CFLAGS="$HOST_CFLAGS -O2 -Wall \$(HOST_CPPFLAGS)"
-
--I386_CFLAGS='-Os -ffreestanding -Wall -W -Wno-format $(I386_CPPFLAGS)'
-+I386_CFLAGS="$I386_CFLAGS -Os -ffreestanding -Wall -W -Wno-format \$(I386_CPPFLAGS)"
- I386_ASFLAGS=''
- I386_LDFLAGS='-static --warn-multiple-gp --warn-common'
-
--IA64_CFLAGS='-Os -ffreestanding -Wall -W -Wno-format -fpic -mconstant-gp -mauto-pic -fno-unwind-tables $(IA64_CPPFLAGS)'
-+IA64_CFLAGS="$IA64_CFLAGS -Os -ffreestanding -Wall -W -Wno-format -fpic -mconstant-gp -mauto-pic -fno-unwind-tables \$(IA64_CPPFLAGS)"
- IA64_ASFLAGS='-mconstant-gp -mauto-pic'
- IA64_LDFLAGS='-static --warn-multiple-gp --warn-common'
-
-@@ -4323,7 +4982,8 @@
-
-
-
-- ac_config_files="$ac_config_files Makefile.conf"
-+ac_config_files="$ac_config_files Makefile.conf"
-+
- cat >confcache <<\_ACEOF
- # This file is a shell script that caches the results of configure
- # tests run on this system so they can be shared between configure
-@@ -4342,39 +5002,58 @@
-
- # The following way of writing the cache mishandles newlines in values,
- # but we know of no workaround that is simple, portable, and efficient.
--# So, don't put newlines in cache variables' values.
-+# So, we kill variables containing newlines.
- # Ultrix sh set writes to stderr and can't be redirected directly,
- # and sets the high bit in the cache file unless we assign to the vars.
--{
-+(
-+ for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
-+ eval ac_val=\$$ac_var
-+ case $ac_val in #(
-+ *${as_nl}*)
-+ case $ac_var in #(
-+ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
-+echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
-+ esac
-+ case $ac_var in #(
-+ _ | IFS | as_nl) ;; #(
-+ *) $as_unset $ac_var ;;
-+ esac ;;
-+ esac
-+ done
-+
- (set) 2>&1 |
-- case `(ac_space=' '; set | grep ac_space) 2>&1` in
-- *ac_space=\ *)
-+ case $as_nl`(ac_space=' '; set) 2>&1` in #(
-+ *${as_nl}ac_space=\ *)
- # `set' does not quote correctly, so add quotes (double-quote
- # substitution turns \\\\ into \\, and sed turns \\ into \).
- sed -n \
- "s/'/'\\\\''/g;
- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
-- ;;
-+ ;; #(
- *)
- # `set' quotes correctly as required by POSIX, so do not add quotes.
-- sed -n \
-- "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
-+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
- ;;
-- esac;
--} |
-+ esac |
-+ sort
-+) |
- sed '
-+ /^ac_cv_env_/b end
- t clear
-- : clear
-+ :clear
- s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
- t end
-- /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
-- : end' >>confcache
--if diff $cache_file confcache >/dev/null 2>&1; then :; else
-- if test -w $cache_file; then
-- test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
-+ s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
-+ :end' >>confcache
-+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
-+ if test -w "$cache_file"; then
-+ test "x$cache_file" != "x/dev/null" &&
-+ { echo "$as_me:$LINENO: updating cache $cache_file" >&5
-+echo "$as_me: updating cache $cache_file" >&6;}
- cat confcache >$cache_file
- else
-- echo "not updating unwritable cache $cache_file"
-+ { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
-+echo "$as_me: not updating unwritable cache $cache_file" >&6;}
- fi
- fi
- rm -f confcache
-@@ -4383,63 +5062,48 @@
- # Let make expand exec_prefix.
- test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
--# VPATH may cause trouble with some makes, so we remove $(srcdir),
--# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
--# trailing colons and then remove the whole line if VPATH becomes empty
--# (actually we leave an empty line to preserve line numbers).
--if test "x$srcdir" = x.; then
-- ac_vpsub='/^[ ]*VPATH[ ]*=/{
--s/:*\$(srcdir):*/:/;
--s/:*\${srcdir}:*/:/;
--s/:*@srcdir@:*/:/;
--s/^\([^=]*=[ ]*\):*/\1/;
--s/:*$//;
--s/^[^=]*=[ ]*$//;
--}'
--fi
--
- # Transform confdefs.h into DEFS.
- # Protect against shell expansion while executing Makefile rules.
- # Protect against Makefile macro expansion.
- #
- # If the first sed substitution is executed (which looks for macros that
--# take arguments), then we branch to the quote section. Otherwise,
-+# take arguments), then branch to the quote section. Otherwise,
- # look for a macro that doesn't take arguments.
--cat >confdef2opt.sed <<\_ACEOF
-+ac_script='
- t clear
--: clear
--s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\),-D\1=\2,g
-+:clear
-+s/^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\)/-D\1=\2/g
- t quote
--s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\),-D\1=\2,g
-+s/^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)/-D\1=\2/g
- t quote
--d
--: quote
--s,[ `~#$^&*(){}\\|;'"<>?],\\&,g
--s,\[,\\&,g
--s,\],\\&,g
--s,\$,$$,g
--p
--_ACEOF
--# We use echo to avoid assuming a particular line-breaking character.
--# The extra dot is to prevent the shell from consuming trailing
--# line-breaks from the sub-command output. A line-break within
--# single-quotes doesn't work because, if this script is created in a
--# platform that uses two characters for line-breaks (e.g., DOS), tr
--# would break.
--ac_LF_and_DOT=`echo; echo .`
--DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'`
--rm -f confdef2opt.sed
-+b any
-+:quote
-+s/[ `~#$^&*(){}\\|;'\''"<>?]/\\&/g
-+s/\[/\\&/g
-+s/\]/\\&/g
-+s/\$/$$/g
-+H
-+:any
-+${
-+ g
-+ s/^\n//
-+ s/\n/ /g
-+ p
-+}
-+'
-+DEFS=`sed -n "$ac_script" confdefs.h`
-
-
- ac_libobjs=
- ac_ltlibobjs=
- for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
- # 1. Remove the extension, and $U if already installed.
-- ac_i=`echo "$ac_i" |
-- sed 's/\$U\././;s/\.o$//;s/\.obj$//'`
-- # 2. Add them.
-- ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext"
-- ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo'
-+ ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
-+ ac_i=`echo "$ac_i" | sed "$ac_script"`
-+ # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
-+ # will be set to the directory where LIBOBJS objects are built.
-+ ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext"
-+ ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo'
- done
- LIBOBJS=$ac_libobjs
-
-@@ -4470,17 +5134,45 @@
- ## M4sh Initialization. ##
- ## --------------------- ##
-
--# Be Bourne compatible
-+# Be more Bourne compatible
-+DUALCASE=1; export DUALCASE # for MKS sh
- if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
--elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
-- set -o posix
-+ setopt NO_GLOB_SUBST
-+else
-+ case `(set -o) 2>/dev/null` in
-+ *posix*) set -o posix ;;
-+esac
-+
-+fi
-+
-+
-+
-+
-+# PATH needs CR
-+# Avoid depending upon Character Ranges.
-+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-+as_cr_digits='0123456789'
-+as_cr_alnum=$as_cr_Letters$as_cr_digits
-+
-+# The user is always right.
-+if test "${PATH_SEPARATOR+set}" != set; then
-+ echo "#! /bin/sh" >conf$$.sh
-+ echo "exit 0" >>conf$$.sh
-+ chmod +x conf$$.sh
-+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-+ PATH_SEPARATOR=';'
-+ else
-+ PATH_SEPARATOR=:
-+ fi
-+ rm -f conf$$.sh
- fi
--DUALCASE=1; export DUALCASE # for MKS sh
-
- # Support unset when possible.
- if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
-@@ -4490,8 +5182,43 @@
- fi
-
-
-+# IFS
-+# We need space, tab and new line, in precisely that order. Quoting is
-+# there to prevent editors from complaining about space-tab.
-+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-+# splitting by setting IFS to empty value.)
-+as_nl='
-+'
-+IFS=" "" $as_nl"
-+
-+# Find who we are. Look in the path if we contain no directory separator.
-+case $0 in
-+ *[\\/]* ) as_myself=$0 ;;
-+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-+done
-+IFS=$as_save_IFS
-+
-+ ;;
-+esac
-+# We did not find ourselves, most probably we were run as `sh COMMAND'
-+# in which case we are not to be found in the path.
-+if test "x$as_myself" = x; then
-+ as_myself=$0
-+fi
-+if test ! -f "$as_myself"; then
-+ echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
-+ { (exit 1); exit 1; }
-+fi
-+
- # Work around bugs in pre-3.0 UWIN ksh.
--$as_unset ENV MAIL MAILPATH
-+for as_var in ENV MAIL MAILPATH
-+do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-+done
- PS1='$ '
- PS2='> '
- PS4='+ '
-@@ -4505,18 +5232,19 @@
- if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
- eval $as_var=C; export $as_var
- else
-- $as_unset $as_var
-+ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
- fi
- done
-
- # Required to use basename.
--if expr a : '\(a\)' >/dev/null 2>&1; then
-+if expr a : '\(a\)' >/dev/null 2>&1 &&
-+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
- else
- as_expr=false
- fi
-
--if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
-+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
- as_basename=basename
- else
- as_basename=false
-@@ -4524,159 +5252,120 @@
-
-
- # Name of the executable.
--as_me=`$as_basename "$0" ||
-+as_me=`$as_basename -- "$0" ||
- $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
- X"$0" : 'X\(//\)$' \| \
-- X"$0" : 'X\(/\)$' \| \
-- . : '\(.\)' 2>/dev/null ||
-+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
- echo X/"$0" |
-- sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
-- /^X\/\(\/\/\)$/{ s//\1/; q; }
-- /^X\/\(\/\).*/{ s//\1/; q; }
-- s/.*/./; q'`
--
--
--# PATH needs CR, and LINENO needs CR and PATH.
--# Avoid depending upon Character Ranges.
--as_cr_letters='abcdefghijklmnopqrstuvwxyz'
--as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
--as_cr_Letters=$as_cr_letters$as_cr_LETTERS
--as_cr_digits='0123456789'
--as_cr_alnum=$as_cr_Letters$as_cr_digits
-+ sed '/^.*\/\([^/][^/]*\)\/*$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\/\(\/\/\)$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\/\(\/\).*/{
-+ s//\1/
-+ q
-+ }
-+ s/.*/./; q'`
-
--# The user is always right.
--if test "${PATH_SEPARATOR+set}" != set; then
-- echo "#! /bin/sh" >conf$$.sh
-- echo "exit 0" >>conf$$.sh
-- chmod +x conf$$.sh
-- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-- PATH_SEPARATOR=';'
-- else
-- PATH_SEPARATOR=:
-- fi
-- rm -f conf$$.sh
--fi
-+# CDPATH.
-+$as_unset CDPATH
-
-
-- as_lineno_1=$LINENO
-- as_lineno_2=$LINENO
-- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-- test "x$as_lineno_1" != "x$as_lineno_2" &&
-- test "x$as_lineno_3" = "x$as_lineno_2" || {
-- # Find who we are. Look in the path if we contain no path at all
-- # relative or not.
-- case $0 in
-- *[\\/]* ) as_myself=$0 ;;
-- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
--for as_dir in $PATH
--do
-- IFS=$as_save_IFS
-- test -z "$as_dir" && as_dir=.
-- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
--done
-
-- ;;
-- esac
-- # We did not find ourselves, most probably we were run as `sh COMMAND'
-- # in which case we are not to be found in the path.
-- if test "x$as_myself" = x; then
-- as_myself=$0
-- fi
-- if test ! -f "$as_myself"; then
-- { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5
--echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;}
-- { (exit 1); exit 1; }; }
-- fi
-- case $CONFIG_SHELL in
-- '')
-- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
--for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
--do
-- IFS=$as_save_IFS
-- test -z "$as_dir" && as_dir=.
-- for as_base in sh bash ksh sh5; do
-- case $as_dir in
-- /*)
-- if ("$as_dir/$as_base" -c '
- as_lineno_1=$LINENO
- as_lineno_2=$LINENO
-- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
- test "x$as_lineno_1" != "x$as_lineno_2" &&
-- test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
-- $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
-- $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
-- CONFIG_SHELL=$as_dir/$as_base
-- export CONFIG_SHELL
-- exec "$CONFIG_SHELL" "$0" ${1+"$@"}
-- fi;;
-- esac
-- done
--done
--;;
-- esac
-+ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
-
- # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
- # uniformly replaced by the line number. The first 'sed' inserts a
-- # line-number line before each line; the second 'sed' does the real
-- # work. The second script uses 'N' to pair each line-number line
-- # with the numbered line, and appends trailing '-' during
-- # substitution so that $LINENO is not a special case at line end.
-+ # line-number line after each line using $LINENO; the second 'sed'
-+ # does the real work. The second script uses 'N' to pair each
-+ # line-number line with the line containing $LINENO, and appends
-+ # trailing '-' during substitution so that $LINENO is not a special
-+ # case at line end.
- # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
-- # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
-- sed '=' <$as_myself |
-+ # scripts with optimization help from Paolo Bonzini. Blame Lee
-+ # E. McMahon (1931-1989) for sed's syntax. :-)
-+ sed -n '
-+ p
-+ /[$]LINENO/=
-+ ' <$as_myself |
- sed '
-+ s/[$]LINENO.*/&-/
-+ t lineno
-+ b
-+ :lineno
- N
-- s,$,-,
-- : loop
-- s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
-+ :loop
-+ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
- t loop
-- s,-$,,
-- s,^['$as_cr_digits']*\n,,
-+ s/-\n.*//
- ' >$as_me.lineno &&
-- chmod +x $as_me.lineno ||
-- { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5
--echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;}
-+ chmod +x "$as_me.lineno" ||
-+ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
- { (exit 1); exit 1; }; }
-
- # Don't try to exec as it changes $[0], causing all sort of problems
- # (the dirname of $[0] is not the place where we might find the
-- # original and so on. Autoconf is especially sensible to this).
-- . ./$as_me.lineno
-+ # original and so on. Autoconf is especially sensitive to this).
-+ . "./$as_me.lineno"
- # Exit status is that of the last command.
- exit
- }
-
-
--case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
-- *c*,-n*) ECHO_N= ECHO_C='
--' ECHO_T=' ' ;;
-- *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
-- *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
-+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
-+ as_dirname=dirname
-+else
-+ as_dirname=false
-+fi
-+
-+ECHO_C= ECHO_N= ECHO_T=
-+case `echo -n x` in
-+-n*)
-+ case `echo 'x\c'` in
-+ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
-+ *) ECHO_C='\c';;
-+ esac;;
-+*)
-+ ECHO_N='-n';;
- esac
-
--if expr a : '\(a\)' >/dev/null 2>&1; then
-+if expr a : '\(a\)' >/dev/null 2>&1 &&
-+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
- else
- as_expr=false
- fi
-
- rm -f conf$$ conf$$.exe conf$$.file
-+if test -d conf$$.dir; then
-+ rm -f conf$$.dir/conf$$.file
-+else
-+ rm -f conf$$.dir
-+ mkdir conf$$.dir
-+fi
- echo >conf$$.file
- if ln -s conf$$.file conf$$ 2>/dev/null; then
-- # We could just check for DJGPP; but this test a) works b) is more generic
-- # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
-- if test -f conf$$.exe; then
-- # Don't use ln at all; we don't have any links
-+ as_ln_s='ln -s'
-+ # ... but there are two gotchas:
-+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
-+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
-+ # In both cases, we have to default to `cp -p'.
-+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
- as_ln_s='cp -p'
-- else
-- as_ln_s='ln -s'
-- fi
- elif ln conf$$.file conf$$ 2>/dev/null; then
- as_ln_s=ln
- else
- as_ln_s='cp -p'
- fi
--rm -f conf$$ conf$$.exe conf$$.file
-+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-+rmdir conf$$.dir 2>/dev/null
-
- if mkdir -p . 2>/dev/null; then
- as_mkdir_p=:
-@@ -4685,7 +5374,28 @@
- as_mkdir_p=false
- fi
-
--as_executable_p="test -f"
-+if test -x / >/dev/null 2>&1; then
-+ as_test_x='test -x'
-+else
-+ if ls -dL / >/dev/null 2>&1; then
-+ as_ls_L_option=L
-+ else
-+ as_ls_L_option=
-+ fi
-+ as_test_x='
-+ eval sh -c '\''
-+ if test -d "$1"; then
-+ test -d "$1/.";
-+ else
-+ case $1 in
-+ -*)set "./$1";;
-+ esac;
-+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
-+ ???[sx]*):;;*)false;;esac;fi
-+ '\'' sh
-+ '
-+fi
-+as_executable_p=$as_test_x
-
- # Sed expression to map a string onto a valid CPP name.
- as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-@@ -4694,31 +5404,14 @@
- as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
--# IFS
--# We need space, tab and new line, in precisely that order.
--as_nl='
--'
--IFS=" $as_nl"
--
--# CDPATH.
--$as_unset CDPATH
--
- exec 6>&1
-
--# Open the log real soon, to keep \$[0] and so on meaningful, and to
-+# Save the log message, to keep $[0] and so on meaningful, and to
- # report actual input values of CONFIG_FILES etc. instead of their
--# values after options handling. Logging --version etc. is OK.
--exec 5>>config.log
--{
-- echo
-- sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
--## Running $as_me. ##
--_ASBOX
--} >&5
--cat >&5 <<_CSEOF
--
-+# values after options handling.
-+ac_log="
- This file was extended by $as_me, which was
--generated by GNU Autoconf 2.59. Invocation command line was
-+generated by GNU Autoconf 2.61. Invocation command line was
-
- CONFIG_FILES = $CONFIG_FILES
- CONFIG_HEADERS = $CONFIG_HEADERS
-@@ -4726,30 +5419,18 @@
- CONFIG_COMMANDS = $CONFIG_COMMANDS
- $ $0 $@
-
--_CSEOF
--echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5
--echo >&5
-+on `(hostname || uname -n) 2>/dev/null | sed 1q`
-+"
-+
- _ACEOF
-
-+cat >>$CONFIG_STATUS <<_ACEOF
- # Files that config.status was made for.
--if test -n "$ac_config_files"; then
-- echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS
--fi
--
--if test -n "$ac_config_headers"; then
-- echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS
--fi
-+config_files="$ac_config_files"
-
--if test -n "$ac_config_links"; then
-- echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS
--fi
--
--if test -n "$ac_config_commands"; then
-- echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS
--fi
-+_ACEOF
-
- cat >>$CONFIG_STATUS <<\_ACEOF
--
- ac_cs_usage="\
- \`$as_me' instantiates files from templates according to the
- current configuration.
-@@ -4757,7 +5438,7 @@
- Usage: $0 [OPTIONS] [FILE]...
-
- -h, --help print this help, then exit
-- -V, --version print version number, then exit
-+ -V, --version print version number and configuration settings, then exit
- -q, --quiet do not print progress messages
- -d, --debug don't remove temporary files
- --recheck update $as_me by reconfiguring in the same conditions
-@@ -4768,18 +5449,20 @@
- $config_files
-
- Report bugs to <bug-autoconf at gnu.org>."
--_ACEOF
-
-+_ACEOF
- cat >>$CONFIG_STATUS <<_ACEOF
- ac_cs_version="\\
- config.status
--configured by $0, generated by GNU Autoconf 2.59,
-- with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
-+configured by $0, generated by GNU Autoconf 2.61,
-+ with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
-
--Copyright (C) 2003 Free Software Foundation, Inc.
-+Copyright (C) 2006 Free Software Foundation, Inc.
- This config.status script is free software; the Free Software Foundation
- gives unlimited permission to copy, distribute and modify it."
--srcdir=$srcdir
-+
-+ac_pwd='$ac_pwd'
-+srcdir='$srcdir'
- _ACEOF
-
- cat >>$CONFIG_STATUS <<\_ACEOF
-@@ -4790,60 +5473,42 @@
- do
- case $1 in
- --*=*)
-- ac_option=`expr "x$1" : 'x\([^=]*\)='`
-- ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
-+ ac_option=`expr "X$1" : 'X\([^=]*\)='`
-+ ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
- ac_shift=:
- ;;
-- -*)
-+ *)
- ac_option=$1
- ac_optarg=$2
- ac_shift=shift
- ;;
-- *) # This is not an option, so the user has probably given explicit
-- # arguments.
-- ac_option=$1
-- ac_need_defaults=false;;
- esac
-
- case $ac_option in
- # Handling of the options.
--_ACEOF
--cat >>$CONFIG_STATUS <<\_ACEOF
- -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
- ac_cs_recheck=: ;;
-- --version | --vers* | -V )
-- echo "$ac_cs_version"; exit 0 ;;
-- --he | --h)
-- # Conflict between --help and --header
-- { { echo "$as_me:$LINENO: error: ambiguous option: $1
--Try \`$0 --help' for more information." >&5
--echo "$as_me: error: ambiguous option: $1
--Try \`$0 --help' for more information." >&2;}
-- { (exit 1); exit 1; }; };;
-- --help | --hel | -h )
-- echo "$ac_cs_usage"; exit 0 ;;
-- --debug | --d* | -d )
-+ --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
-+ echo "$ac_cs_version"; exit ;;
-+ --debug | --debu | --deb | --de | --d | -d )
- debug=: ;;
- --file | --fil | --fi | --f )
- $ac_shift
- CONFIG_FILES="$CONFIG_FILES $ac_optarg"
- ac_need_defaults=false;;
-- --header | --heade | --head | --hea )
-- $ac_shift
-- CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
-- ac_need_defaults=false;;
-+ --he | --h | --help | --hel | -h )
-+ echo "$ac_cs_usage"; exit ;;
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil | --si | --s)
- ac_cs_silent=: ;;
-
- # This is an error.
-- -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
--Try \`$0 --help' for more information." >&5
--echo "$as_me: error: unrecognized option: $1
--Try \`$0 --help' for more information." >&2;}
-+ -*) { echo "$as_me: error: unrecognized option: $1
-+Try \`$0 --help' for more information." >&2
- { (exit 1); exit 1; }; } ;;
-
-- *) ac_config_targets="$ac_config_targets $1" ;;
-+ *) ac_config_targets="$ac_config_targets $1"
-+ ac_need_defaults=false ;;
-
- esac
- shift
-@@ -4859,28 +5524,42 @@
- _ACEOF
- cat >>$CONFIG_STATUS <<_ACEOF
- if \$ac_cs_recheck; then
-- echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
-- exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
-+ echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
-+ CONFIG_SHELL=$SHELL
-+ export CONFIG_SHELL
-+ exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
- fi
-
- _ACEOF
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+exec 5>>config.log
-+{
-+ echo
-+ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
-+## Running $as_me. ##
-+_ASBOX
-+ echo "$ac_log"
-+} >&5
-
--
--
--
-+_ACEOF
-+cat >>$CONFIG_STATUS <<_ACEOF
-+_ACEOF
-
- cat >>$CONFIG_STATUS <<\_ACEOF
-+
-+# Handling of arguments.
- for ac_config_target in $ac_config_targets
- do
-- case "$ac_config_target" in
-- # Handling of arguments.
-- "Makefile.conf" ) CONFIG_FILES="$CONFIG_FILES Makefile.conf" ;;
-+ case $ac_config_target in
-+ "Makefile.conf") CONFIG_FILES="$CONFIG_FILES Makefile.conf" ;;
-+
- *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
- echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
- { (exit 1); exit 1; }; };;
- esac
- done
-
-+
- # If the user did not use the arguments to specify the items to instantiate,
- # then the envvar interface is used. Set only those that are not.
- # We use the long form for the default assignment because of an extremely
-@@ -4890,360 +5569,436 @@
- fi
-
- # Have a temporary directory for convenience. Make it in the build tree
--# simply because there is no reason to put it here, and in addition,
-+# simply because there is no reason against having it here, and in addition,
- # creating and moving files from /tmp can sometimes cause problems.
--# Create a temporary directory, and hook for its removal unless debugging.
-+# Hook for its removal unless debugging.
-+# Note that there is a small window in which the directory will not be cleaned:
-+# after its creation but before its name has been assigned to `$tmp'.
- $debug ||
- {
-- trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
-+ tmp=
-+ trap 'exit_status=$?
-+ { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
-+' 0
- trap '{ (exit 1); exit 1; }' 1 2 13 15
- }
--
- # Create a (secure) tmp directory for tmp files.
-
- {
-- tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` &&
-+ tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
- test -n "$tmp" && test -d "$tmp"
- } ||
- {
-- tmp=./confstat$$-$RANDOM
-- (umask 077 && mkdir $tmp)
-+ tmp=./conf$$-$RANDOM
-+ (umask 077 && mkdir "$tmp")
- } ||
- {
- echo "$me: cannot create a temporary directory in ." >&2
- { (exit 1); exit 1; }
- }
-
--_ACEOF
--
--cat >>$CONFIG_STATUS <<_ACEOF
--
- #
--# CONFIG_FILES section.
-+# Set up the sed scripts for CONFIG_FILES section.
- #
-
- # No need to generate the scripts if there are no CONFIG_FILES.
- # This happens for instance when ./config.status config.h
--if test -n "\$CONFIG_FILES"; then
-- # Protect against being on the right side of a sed subst in config.status.
-- sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g;
-- s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF
--s, at SHELL@,$SHELL,;t t
--s, at PATH_SEPARATOR@,$PATH_SEPARATOR,;t t
--s, at PACKAGE_NAME@,$PACKAGE_NAME,;t t
--s, at PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t
--s, at PACKAGE_VERSION@,$PACKAGE_VERSION,;t t
--s, at PACKAGE_STRING@,$PACKAGE_STRING,;t t
--s, at PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t
--s, at exec_prefix@,$exec_prefix,;t t
--s, at prefix@,$prefix,;t t
--s, at program_transform_name@,$program_transform_name,;t t
--s, at bindir@,$bindir,;t t
--s, at sbindir@,$sbindir,;t t
--s, at libexecdir@,$libexecdir,;t t
--s, at datadir@,$datadir,;t t
--s, at sysconfdir@,$sysconfdir,;t t
--s, at sharedstatedir@,$sharedstatedir,;t t
--s, at localstatedir@,$localstatedir,;t t
--s, at libdir@,$libdir,;t t
--s, at includedir@,$includedir,;t t
--s, at oldincludedir@,$oldincludedir,;t t
--s, at infodir@,$infodir,;t t
--s, at mandir@,$mandir,;t t
--s, at build_alias@,$build_alias,;t t
--s, at host_alias@,$host_alias,;t t
--s, at target_alias@,$target_alias,;t t
--s, at DEFS@,$DEFS,;t t
--s, at ECHO_C@,$ECHO_C,;t t
--s, at ECHO_N@,$ECHO_N,;t t
--s, at ECHO_T@,$ECHO_T,;t t
--s, at LIBS@,$LIBS,;t t
--s, at build@,$build,;t t
--s, at build_cpu@,$build_cpu,;t t
--s, at build_vendor@,$build_vendor,;t t
--s, at build_os@,$build_os,;t t
--s, at host@,$host,;t t
--s, at host_cpu@,$host_cpu,;t t
--s, at host_vendor@,$host_vendor,;t t
--s, at host_os@,$host_os,;t t
--s, at CC@,$CC,;t t
--s, at CFLAGS@,$CFLAGS,;t t
--s, at LDFLAGS@,$LDFLAGS,;t t
--s, at CPPFLAGS@,$CPPFLAGS,;t t
--s, at ac_ct_CC@,$ac_ct_CC,;t t
--s, at EXEEXT@,$EXEEXT,;t t
--s, at OBJEXT@,$OBJEXT,;t t
--s, at MKDIR@,$MKDIR,;t t
--s, at RM@,$RM,;t t
--s, at CP@,$CP,;t t
--s, at LN@,$LN,;t t
--s, at TAR@,$TAR,;t t
--s, at RPM@,$RPM,;t t
--s, at SED@,$SED,;t t
--s, at FIND@,$FIND,;t t
--s, at CPP@,$CPP,;t t
--s, at EGREP@,$EGREP,;t t
--s, at LD@,$LD,;t t
--s, at ac_ct_LD@,$ac_ct_LD,;t t
--s, at AS@,$AS,;t t
--s, at ac_ct_AS@,$ac_ct_AS,;t t
--s, at OBJCOPY@,$OBJCOPY,;t t
--s, at ac_ct_OBJCOPY@,$ac_ct_OBJCOPY,;t t
--s, at I386_CC@,$I386_CC,;t t
--s, at I386_CPP@,$I386_CPP,;t t
--s, at I386_LD@,$I386_LD,;t t
--s, at I386_AS@,$I386_AS,;t t
--s, at I386_OBJCOPY@,$I386_OBJCOPY,;t t
--s, at IA64_CC@,$IA64_CC,;t t
--s, at IA64_CPP@,$IA64_CPP,;t t
--s, at IA64_LD@,$IA64_LD,;t t
--s, at IA64_AS@,$IA64_AS,;t t
--s, at IA64_OBJCOPY@,$IA64_OBJCOPY,;t t
--s, at HOST_CC@,$HOST_CC,;t t
--s, at HOST_CFLAGS@,$HOST_CFLAGS,;t t
--s, at I386_CFLAGS@,$I386_CFLAGS,;t t
--s, at I386_ASFLAGS@,$I386_ASFLAGS,;t t
--s, at I386_LDFLAGS@,$I386_LDFLAGS,;t t
--s, at IA64_CFLAGS@,$IA64_CFLAGS,;t t
--s, at IA64_ASFLAGS@,$IA64_ASFLAGS,;t t
--s, at IA64_LDFLAGS@,$IA64_LDFLAGS,;t t
--s, at LIBOBJS@,$LIBOBJS,;t t
--s, at LTLIBOBJS@,$LTLIBOBJS,;t t
--CEOF
--
--_ACEOF
--
-- cat >>$CONFIG_STATUS <<\_ACEOF
-- # Split the substitutions into bite-sized pieces for seds with
-- # small command number limits, like on Digital OSF/1 and HP-UX.
-- ac_max_sed_lines=48
-- ac_sed_frag=1 # Number of current file.
-- ac_beg=1 # First line for current file.
-- ac_end=$ac_max_sed_lines # Line after last line for current file.
-- ac_more_lines=:
-- ac_sed_cmds=
-- while $ac_more_lines; do
-- if test $ac_beg -gt 1; then
-- sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
-- else
-- sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
-- fi
-- if test ! -s $tmp/subs.frag; then
-- ac_more_lines=false
-- else
-- # The purpose of the label and of the branching condition is to
-- # speed up the sed processing (if there are no `@' at all, there
-- # is no need to browse any of the substitutions).
-- # These are the two extra sed commands mentioned above.
-- (echo ':t
-- /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
-- if test -z "$ac_sed_cmds"; then
-- ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
-- else
-- ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
-- fi
-- ac_sed_frag=`expr $ac_sed_frag + 1`
-- ac_beg=$ac_end
-- ac_end=`expr $ac_end + $ac_max_sed_lines`
-- fi
-- done
-- if test -z "$ac_sed_cmds"; then
-- ac_sed_cmds=cat
-+if test -n "$CONFIG_FILES"; then
-+
-+_ACEOF
-+
-+
-+
-+ac_delim='%!_!# '
-+for ac_last_try in false false false false false :; do
-+ cat >conf$$subs.sed <<_ACEOF
-+SHELL!$SHELL$ac_delim
-+PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim
-+PACKAGE_NAME!$PACKAGE_NAME$ac_delim
-+PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim
-+PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim
-+PACKAGE_STRING!$PACKAGE_STRING$ac_delim
-+PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim
-+exec_prefix!$exec_prefix$ac_delim
-+prefix!$prefix$ac_delim
-+program_transform_name!$program_transform_name$ac_delim
-+bindir!$bindir$ac_delim
-+sbindir!$sbindir$ac_delim
-+libexecdir!$libexecdir$ac_delim
-+datarootdir!$datarootdir$ac_delim
-+datadir!$datadir$ac_delim
-+sysconfdir!$sysconfdir$ac_delim
-+sharedstatedir!$sharedstatedir$ac_delim
-+localstatedir!$localstatedir$ac_delim
-+includedir!$includedir$ac_delim
-+oldincludedir!$oldincludedir$ac_delim
-+docdir!$docdir$ac_delim
-+infodir!$infodir$ac_delim
-+htmldir!$htmldir$ac_delim
-+dvidir!$dvidir$ac_delim
-+pdfdir!$pdfdir$ac_delim
-+psdir!$psdir$ac_delim
-+libdir!$libdir$ac_delim
-+localedir!$localedir$ac_delim
-+mandir!$mandir$ac_delim
-+DEFS!$DEFS$ac_delim
-+ECHO_C!$ECHO_C$ac_delim
-+ECHO_N!$ECHO_N$ac_delim
-+ECHO_T!$ECHO_T$ac_delim
-+LIBS!$LIBS$ac_delim
-+build_alias!$build_alias$ac_delim
-+host_alias!$host_alias$ac_delim
-+target_alias!$target_alias$ac_delim
-+build!$build$ac_delim
-+build_cpu!$build_cpu$ac_delim
-+build_vendor!$build_vendor$ac_delim
-+build_os!$build_os$ac_delim
-+host!$host$ac_delim
-+host_cpu!$host_cpu$ac_delim
-+host_vendor!$host_vendor$ac_delim
-+host_os!$host_os$ac_delim
-+CC!$CC$ac_delim
-+CFLAGS!$CFLAGS$ac_delim
-+LDFLAGS!$LDFLAGS$ac_delim
-+CPPFLAGS!$CPPFLAGS$ac_delim
-+ac_ct_CC!$ac_ct_CC$ac_delim
-+EXEEXT!$EXEEXT$ac_delim
-+OBJEXT!$OBJEXT$ac_delim
-+MKDIR!$MKDIR$ac_delim
-+RM!$RM$ac_delim
-+CP!$CP$ac_delim
-+LN!$LN$ac_delim
-+TAR!$TAR$ac_delim
-+RPM!$RPM$ac_delim
-+SED!$SED$ac_delim
-+FIND!$FIND$ac_delim
-+CPP!$CPP$ac_delim
-+GREP!$GREP$ac_delim
-+EGREP!$EGREP$ac_delim
-+LD!$LD$ac_delim
-+AS!$AS$ac_delim
-+OBJCOPY!$OBJCOPY$ac_delim
-+I386_CC!$I386_CC$ac_delim
-+I386_CPP!$I386_CPP$ac_delim
-+I386_LD!$I386_LD$ac_delim
-+I386_AS!$I386_AS$ac_delim
-+I386_OBJCOPY!$I386_OBJCOPY$ac_delim
-+IA64_CC!$IA64_CC$ac_delim
-+IA64_CPP!$IA64_CPP$ac_delim
-+IA64_LD!$IA64_LD$ac_delim
-+IA64_AS!$IA64_AS$ac_delim
-+IA64_OBJCOPY!$IA64_OBJCOPY$ac_delim
-+HOST_CC!$HOST_CC$ac_delim
-+HOST_CFLAGS!$HOST_CFLAGS$ac_delim
-+I386_CFLAGS!$I386_CFLAGS$ac_delim
-+I386_ASFLAGS!$I386_ASFLAGS$ac_delim
-+I386_LDFLAGS!$I386_LDFLAGS$ac_delim
-+IA64_CFLAGS!$IA64_CFLAGS$ac_delim
-+IA64_ASFLAGS!$IA64_ASFLAGS$ac_delim
-+IA64_LDFLAGS!$IA64_LDFLAGS$ac_delim
-+LIBOBJS!$LIBOBJS$ac_delim
-+LTLIBOBJS!$LTLIBOBJS$ac_delim
-+_ACEOF
-+
-+ if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 86; then
-+ break
-+ elif $ac_last_try; then
-+ { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
-+echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
-+ { (exit 1); exit 1; }; }
-+ else
-+ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
- fi
--fi # test -n "$CONFIG_FILES"
-+done
-+
-+ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
-+if test -n "$ac_eof"; then
-+ ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
-+ ac_eof=`expr $ac_eof + 1`
-+fi
-
-+cat >>$CONFIG_STATUS <<_ACEOF
-+cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof
-+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end
- _ACEOF
-+sed '
-+s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
-+s/^/s,@/; s/!/@,|#_!!_#|/
-+:n
-+t n
-+s/'"$ac_delim"'$/,g/; t
-+s/$/\\/; p
-+N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
-+' >>$CONFIG_STATUS <conf$$subs.sed
-+rm -f conf$$subs.sed
-+cat >>$CONFIG_STATUS <<_ACEOF
-+:end
-+s/|#_!!_#|//g
-+CEOF$ac_eof
-+_ACEOF
-+
-+
-+# VPATH may cause trouble with some makes, so we remove $(srcdir),
-+# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
-+# trailing colons and then remove the whole line if VPATH becomes empty
-+# (actually we leave an empty line to preserve line numbers).
-+if test "x$srcdir" = x.; then
-+ ac_vpsub='/^[ ]*VPATH[ ]*=/{
-+s/:*\$(srcdir):*/:/
-+s/:*\${srcdir}:*/:/
-+s/:*@srcdir@:*/:/
-+s/^\([^=]*=[ ]*\):*/\1/
-+s/:*$//
-+s/^[^=]*=[ ]*$//
-+}'
-+fi
-+
- cat >>$CONFIG_STATUS <<\_ACEOF
--for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
-- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-- case $ac_file in
-- - | *:- | *:-:* ) # input from stdin
-- cat >$tmp/stdin
-- ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-- *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-- * ) ac_file_in=$ac_file.in ;;
-+fi # test -n "$CONFIG_FILES"
-+
-+
-+for ac_tag in :F $CONFIG_FILES
-+do
-+ case $ac_tag in
-+ :[FHLC]) ac_mode=$ac_tag; continue;;
- esac
-+ case $ac_mode$ac_tag in
-+ :[FHL]*:*);;
-+ :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5
-+echo "$as_me: error: Invalid tag $ac_tag." >&2;}
-+ { (exit 1); exit 1; }; };;
-+ :[FH]-) ac_tag=-:-;;
-+ :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
-+ esac
-+ ac_save_IFS=$IFS
-+ IFS=:
-+ set x $ac_tag
-+ IFS=$ac_save_IFS
-+ shift
-+ ac_file=$1
-+ shift
-+
-+ case $ac_mode in
-+ :L) ac_source=$1;;
-+ :[FH])
-+ ac_file_inputs=
-+ for ac_f
-+ do
-+ case $ac_f in
-+ -) ac_f="$tmp/stdin";;
-+ *) # Look for the file first in the build tree, then in the source tree
-+ # (if the path is not absolute). The absolute path cannot be DOS-style,
-+ # because $ac_f cannot contain `:'.
-+ test -f "$ac_f" ||
-+ case $ac_f in
-+ [\\/$]*) false;;
-+ *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
-+ esac ||
-+ { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5
-+echo "$as_me: error: cannot find input file: $ac_f" >&2;}
-+ { (exit 1); exit 1; }; };;
-+ esac
-+ ac_file_inputs="$ac_file_inputs $ac_f"
-+ done
-
-- # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
-- ac_dir=`(dirname "$ac_file") 2>/dev/null ||
-+ # Let's still pretend it is `configure' which instantiates (i.e., don't
-+ # use $as_me), people would be surprised to read:
-+ # /* config.h. Generated by config.status. */
-+ configure_input="Generated from "`IFS=:
-+ echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure."
-+ if test x"$ac_file" != x-; then
-+ configure_input="$ac_file. $configure_input"
-+ { echo "$as_me:$LINENO: creating $ac_file" >&5
-+echo "$as_me: creating $ac_file" >&6;}
-+ fi
-+
-+ case $ac_tag in
-+ *:-:* | *:-) cat >"$tmp/stdin";;
-+ esac
-+ ;;
-+ esac
-+
-+ ac_dir=`$as_dirname -- "$ac_file" ||
- $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$ac_file" : 'X\(//\)[^/]' \| \
- X"$ac_file" : 'X\(//\)$' \| \
-- X"$ac_file" : 'X\(/\)' \| \
-- . : '\(.\)' 2>/dev/null ||
-+ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
- echo X"$ac_file" |
-- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-- /^X\(\/\/\)$/{ s//\1/; q; }
-- /^X\(\/\).*/{ s//\1/; q; }
-- s/.*/./; q'`
-- { if $as_mkdir_p; then
-- mkdir -p "$ac_dir"
-- else
-- as_dir="$ac_dir"
-+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\/\)[^/].*/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\/\)$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\).*/{
-+ s//\1/
-+ q
-+ }
-+ s/.*/./; q'`
-+ { as_dir="$ac_dir"
-+ case $as_dir in #(
-+ -*) as_dir=./$as_dir;;
-+ esac
-+ test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
- as_dirs=
-- while test ! -d "$as_dir"; do
-- as_dirs="$as_dir $as_dirs"
-- as_dir=`(dirname "$as_dir") 2>/dev/null ||
-+ while :; do
-+ case $as_dir in #(
-+ *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
-+ *) as_qdir=$as_dir;;
-+ esac
-+ as_dirs="'$as_qdir' $as_dirs"
-+ as_dir=`$as_dirname -- "$as_dir" ||
- $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
-- X"$as_dir" : 'X\(/\)' \| \
-- . : '\(.\)' 2>/dev/null ||
-+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
- echo X"$as_dir" |
-- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-- /^X\(\/\/\)$/{ s//\1/; q; }
-- /^X\(\/\).*/{ s//\1/; q; }
-- s/.*/./; q'`
-+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\/\)[^/].*/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\/\)$/{
-+ s//\1/
-+ q
-+ }
-+ /^X\(\/\).*/{
-+ s//\1/
-+ q
-+ }
-+ s/.*/./; q'`
-+ test -d "$as_dir" && break
- done
-- test ! -n "$as_dirs" || mkdir $as_dirs
-- fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
--echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
-+ test -z "$as_dirs" || eval "mkdir $as_dirs"
-+ } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
-+echo "$as_me: error: cannot create directory $as_dir" >&2;}
- { (exit 1); exit 1; }; }; }
--
- ac_builddir=.
-
--if test "$ac_dir" != .; then
-+case "$ac_dir" in
-+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-+*)
- ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-- # A "../" for each directory in $ac_dir_suffix.
-- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
--else
-- ac_dir_suffix= ac_top_builddir=
--fi
-+ # A ".." for each directory in $ac_dir_suffix.
-+ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
-+ case $ac_top_builddir_sub in
-+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
-+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
-+ esac ;;
-+esac
-+ac_abs_top_builddir=$ac_pwd
-+ac_abs_builddir=$ac_pwd$ac_dir_suffix
-+# for backward compatibility:
-+ac_top_builddir=$ac_top_build_prefix
-
- case $srcdir in
-- .) # No --srcdir option. We are building in place.
-+ .) # We are building in place.
- ac_srcdir=.
-- if test -z "$ac_top_builddir"; then
-- ac_top_srcdir=.
-- else
-- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
-- fi ;;
-- [\\/]* | ?:[\\/]* ) # Absolute path.
-+ ac_top_srcdir=$ac_top_builddir_sub
-+ ac_abs_top_srcdir=$ac_pwd ;;
-+ [\\/]* | ?:[\\/]* ) # Absolute name.
- ac_srcdir=$srcdir$ac_dir_suffix;
-- ac_top_srcdir=$srcdir ;;
-- *) # Relative path.
-- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
-- ac_top_srcdir=$ac_top_builddir$srcdir ;;
--esac
--
--# Do not use `cd foo && pwd` to compute absolute paths, because
--# the directories may not exist.
--case `pwd` in
--.) ac_abs_builddir="$ac_dir";;
--*)
-- case "$ac_dir" in
-- .) ac_abs_builddir=`pwd`;;
-- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
-- *) ac_abs_builddir=`pwd`/"$ac_dir";;
-- esac;;
--esac
--case $ac_abs_builddir in
--.) ac_abs_top_builddir=${ac_top_builddir}.;;
--*)
-- case ${ac_top_builddir}. in
-- .) ac_abs_top_builddir=$ac_abs_builddir;;
-- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
-- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
-- esac;;
--esac
--case $ac_abs_builddir in
--.) ac_abs_srcdir=$ac_srcdir;;
--*)
-- case $ac_srcdir in
-- .) ac_abs_srcdir=$ac_abs_builddir;;
-- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
-- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
-- esac;;
--esac
--case $ac_abs_builddir in
--.) ac_abs_top_srcdir=$ac_top_srcdir;;
--*)
-- case $ac_top_srcdir in
-- .) ac_abs_top_srcdir=$ac_abs_builddir;;
-- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
-- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
-- esac;;
-+ ac_top_srcdir=$srcdir
-+ ac_abs_top_srcdir=$srcdir ;;
-+ *) # Relative name.
-+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
-+ ac_top_srcdir=$ac_top_build_prefix$srcdir
-+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
- esac
-+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-
-
-+ case $ac_mode in
-+ :F)
-+ #
-+ # CONFIG_FILE
-+ #
-
-- if test x"$ac_file" != x-; then
-- { echo "$as_me:$LINENO: creating $ac_file" >&5
--echo "$as_me: creating $ac_file" >&6;}
-- rm -f "$ac_file"
-- fi
-- # Let's still pretend it is `configure' which instantiates (i.e., don't
-- # use $as_me), people would be surprised to read:
-- # /* config.h. Generated by config.status. */
-- if test x"$ac_file" = x-; then
-- configure_input=
-- else
-- configure_input="$ac_file. "
-- fi
-- configure_input=$configure_input"Generated from `echo $ac_file_in |
-- sed 's,.*/,,'` by configure."
-+_ACEOF
-
-- # First look for the input files in the build tree, otherwise in the
-- # src tree.
-- ac_file_inputs=`IFS=:
-- for f in $ac_file_in; do
-- case $f in
-- -) echo $tmp/stdin ;;
-- [\\/$]*)
-- # Absolute (can't be DOS-style, as IFS=:)
-- test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
--echo "$as_me: error: cannot find input file: $f" >&2;}
-- { (exit 1); exit 1; }; }
-- echo "$f";;
-- *) # Relative
-- if test -f "$f"; then
-- # Build tree
-- echo "$f"
-- elif test -f "$srcdir/$f"; then
-- # Source tree
-- echo "$srcdir/$f"
-- else
-- # /dev/null tree
-- { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
--echo "$as_me: error: cannot find input file: $f" >&2;}
-- { (exit 1); exit 1; }; }
-- fi;;
-- esac
-- done` || { (exit 1); exit 1; }
-+cat >>$CONFIG_STATUS <<\_ACEOF
-+# If the template does not know about datarootdir, expand it.
-+# FIXME: This hack should be removed a few years after 2.60.
-+ac_datarootdir_hack=; ac_datarootdir_seen=
-+
-+case `sed -n '/datarootdir/ {
-+ p
-+ q
-+}
-+/@datadir@/p
-+/@docdir@/p
-+/@infodir@/p
-+/@localedir@/p
-+/@mandir@/p
-+' $ac_file_inputs` in
-+*datarootdir*) ac_datarootdir_seen=yes;;
-+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
-+ { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
-+echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
- _ACEOF
- cat >>$CONFIG_STATUS <<_ACEOF
-+ ac_datarootdir_hack='
-+ s&@datadir@&$datadir&g
-+ s&@docdir@&$docdir&g
-+ s&@infodir@&$infodir&g
-+ s&@localedir@&$localedir&g
-+ s&@mandir@&$mandir&g
-+ s&\\\${datarootdir}&$datarootdir&g' ;;
-+esac
-+_ACEOF
-+
-+# Neutralize VPATH when `$srcdir' = `.'.
-+# Shell code in configure.ac might set extrasub.
-+# FIXME: do we really want to maintain this feature?
-+cat >>$CONFIG_STATUS <<_ACEOF
- sed "$ac_vpsub
- $extrasub
- _ACEOF
- cat >>$CONFIG_STATUS <<\_ACEOF
- :t
- /@[a-zA-Z_][a-zA-Z_0-9]*@/!b
--s, at configure_input@,$configure_input,;t t
--s, at srcdir@,$ac_srcdir,;t t
--s, at abs_srcdir@,$ac_abs_srcdir,;t t
--s, at top_srcdir@,$ac_top_srcdir,;t t
--s, at abs_top_srcdir@,$ac_abs_top_srcdir,;t t
--s, at builddir@,$ac_builddir,;t t
--s, at abs_builddir@,$ac_abs_builddir,;t t
--s, at top_builddir@,$ac_top_builddir,;t t
--s, at abs_top_builddir@,$ac_abs_top_builddir,;t t
--" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
-- rm -f $tmp/stdin
-- if test x"$ac_file" != x-; then
-- mv $tmp/out $ac_file
-- else
-- cat $tmp/out
-- rm -f $tmp/out
-- fi
-+s&@configure_input@&$configure_input&;t t
-+s&@top_builddir@&$ac_top_builddir_sub&;t t
-+s&@srcdir@&$ac_srcdir&;t t
-+s&@abs_srcdir@&$ac_abs_srcdir&;t t
-+s&@top_srcdir@&$ac_top_srcdir&;t t
-+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
-+s&@builddir@&$ac_builddir&;t t
-+s&@abs_builddir@&$ac_abs_builddir&;t t
-+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
-+$ac_datarootdir_hack
-+" $ac_file_inputs | sed -f "$tmp/subs-1.sed" >$tmp/out
-+
-+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
-+ { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
-+ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
-+ { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-+which seems to be undefined. Please make sure it is defined." >&5
-+echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-+which seems to be undefined. Please make sure it is defined." >&2;}
-
--done
--_ACEOF
-+ rm -f "$tmp/stdin"
-+ case $ac_file in
-+ -) cat "$tmp/out"; rm -f "$tmp/out";;
-+ *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;;
-+ esac
-+ ;;
-+
-+
-+
-+ esac
-+
-+done # for ac_tag
-
--cat >>$CONFIG_STATUS <<\_ACEOF
-
- { (exit 0); exit 0; }
- _ACEOF
Modified: buildrom-devel/packages/mkelfimage/mkelfimage.mk
===================================================================
--- buildrom-devel/packages/mkelfimage/mkelfimage.mk 2008-08-06 15:32:47 UTC (rev 214)
+++ buildrom-devel/packages/mkelfimage/mkelfimage.mk 2008-08-06 21:03:47 UTC (rev 215)
@@ -1,16 +1,19 @@
-MKELFIMAGE_URL=ftp://ftp.lnxi.com/pub/mkelfImage/
-MKELFIMAGE_SOURCE=mkelfImage-2.7.tar.gz
MKELFIMAGE_DIR=$(BUILD_DIR)/mkelfimage
-MKELFIMAGE_SRC_DIR=$(MKELFIMAGE_DIR)/mkelfImage-2.7
+MKELFIMAGE_SRC_DIR=$(MKELFIMAGE_DIR)/svn
MKELFIMAGE_STAMP_DIR=$(MKELFIMAGE_DIR)/stamps
MKELFIMAGE_LOG_DIR=$(MKELFIMAGE_DIR)/logs
-MKELFIMAGE_PATCHES=$(PACKAGE_DIR)/mkelfimage/mkelfImage-2.7-x86_64.patch
-MKELFIMAGE_PATCHES+=$(PACKAGE_DIR)/mkelfimage/mkelfimage-autoconf.patch
+MKELFIMAGE_PATCHES=
+MKELFIMAGE_TAG=3473
+MKELFIMAGE_TARBALL=mkelfimage-svn-$(MKELFIMAGE_TAG).tar.gz
+MKELFIMAGE_URL=svn://coreboot.org/repos/trunk/util/mkelfImage
+
ifeq ($(CONFIG_VERBOSE),y)
+MKELFIMAGE_FETCH_LOG=/dev/stdout
MKELFIMAGE_BUILD_LOG=/dev/stdout
MKELFIMAGE_CONFIG_LOG=/dev/stdout
else
+MKELFIMAGE_FETCH_LOG=$(MKELFIMAGE_LOG_DIR)/fetch.log
MKELFIMAGE_BUILD_LOG=$(MKELFIMAGE_LOG_DIR)/build.log
MKELFIMAGE_CONFIG_LOG=$(MKELFIMAGE_LOG_DIR)/config.log
endif
@@ -18,13 +21,15 @@
$(MKELFIMAGE_STAMP_DIR) $(MKELFIMAGE_LOG_DIR):
@ mkdir -p $@
-$(SOURCE_DIR)/$(MKELFIMAGE_SOURCE):
+$(SOURCE_DIR)/$(MKELFIMAGE_TARBALL): | $(MKELFIMAGE_LOG_DIR)
+ @ echo "Fetching the mkelfimage rev $(MKELFIMAGE_TAG) code..."
@ mkdir -p $(SOURCE_DIR)
- @ wget $(WGET_Q) -P $(SOURCE_DIR) $(MKELFIMAGE_URL)/$(MKELFIMAGE_SOURCE)
+ @ $(BIN_DIR)/fetchsvn.sh $(MKELFIMAGE_URL) $(SOURCE_DIR)/mkelfimage \
+ $(MKELFIMAGE_TAG) $@ > $(MKELFIMAGE_FETCH_LOG) 2>&1
-$(MKELFIMAGE_STAMP_DIR)/.unpacked: $(SOURCE_DIR)/$(MKELFIMAGE_SOURCE) | $(MKELFIMAGE_STAMP_DIR) $(MKELFIMAGE_LOG_DIR)
+$(MKELFIMAGE_STAMP_DIR)/.unpacked: $(SOURCE_DIR)/$(MKELFIMAGE_TARBALL) | $(MKELFIMAGE_STAMP_DIR) $(MKELFIMAGE_LOG_DIR)
@ echo "Unpacking mkelfimage..."
- @ tar -C $(MKELFIMAGE_DIR) -zxf $(SOURCE_DIR)/$(MKELFIMAGE_SOURCE)
+ @ tar -C $(MKELFIMAGE_DIR) -zxf $(SOURCE_DIR)/$(MKELFIMAGE_TARBALL)
@ touch $@
$(MKELFIMAGE_STAMP_DIR)/.patched: $(MKELFIMAGE_STAMP_DIR)/.unpacked
@@ -61,7 +66,7 @@
mkelfimage-bom:
echo "Package: mkelfimage"
- echo "Source: $(MKELFIMAGE_URL)/$(MKELFIMAGE_SOURCE)"
+ echo "Source: $(MKELFIMAGE_URL) rev $(MKELFIMAGE_TAG)"
echo ""
mkelfimage-extract: $(MKELFIMAGE_STAMP_DIR)/.patched
More information about the coreboot
mailing list