[coreboot] [PATCH] v2: Enable printk in CAR for all AMD K8 boards
Carl-Daniel Hailfinger
c-d.hailfinger.devel.2006 at gmx.net
Fri Dec 12 02:40:50 CET 2008
Hi,
in the process of trying to debug some HT sync problems I added lots of
debug code to src/northbridge/amd/amdk8/incoherent_ht.c.
However, printk is not available for all boards at that stage.
I'd like to change the following boards:
agami/aruma
arima/hdama
asus/a8n_e
broadcom/blast
ibm/e325
ibm/e326
iwill/dk8s2
iwill/dk8x
msi/ms7135
newisys/khepri
sunw/ultra40
tyan/s2850
tyan/s2875
tyan/s2880
tyan/s2881
tyan/s2882
tyan/s2885
tyan/s2891
tyan/s2892
tyan/s2895
tyan/s4880
tyan/s4882
abuild works fine for all of them.
agami/aruma needs a Config-abuild.lb which doesn't have fallback and
normal due to size problems.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006 at gmx.net>
Index: LinuxBIOSv2-printk_car/src/mainboard/iwill/dk8s2/Options.lb
===================================================================
--- LinuxBIOSv2-printk_car/src/mainboard/iwill/dk8s2/Options.lb (revision 3808)
+++ LinuxBIOSv2-printk_car/src/mainboard/iwill/dk8s2/Options.lb (working copy)
@@ -53,6 +53,7 @@
uses DCACHE_RAM_BASE
uses DCACHE_RAM_SIZE
uses CONFIG_USE_INIT
+uses CONFIG_USE_PRINTK_IN_CAR
## ROM_SIZE is the size of boot ROM that this board will use.
default ROM_SIZE=524288
@@ -177,6 +178,8 @@
##
default CONFIG_GDB_STUB=0
+default CONFIG_USE_PRINTK_IN_CAR=1
+
##
## The Serial Console
##
Index: LinuxBIOSv2-printk_car/src/mainboard/iwill/dk8x/Options.lb
===================================================================
--- LinuxBIOSv2-printk_car/src/mainboard/iwill/dk8x/Options.lb (revision 3808)
+++ LinuxBIOSv2-printk_car/src/mainboard/iwill/dk8x/Options.lb (working copy)
@@ -53,6 +53,7 @@
uses DCACHE_RAM_BASE
uses DCACHE_RAM_SIZE
uses CONFIG_USE_INIT
+uses CONFIG_USE_PRINTK_IN_CAR
## ROM_SIZE is the size of boot ROM that this board will use.
default ROM_SIZE=524288
@@ -176,6 +177,8 @@
##
default CONFIG_GDB_STUB=0
+default CONFIG_USE_PRINTK_IN_CAR=1
+
##
## The Serial Console
##
Index: LinuxBIOSv2-printk_car/src/mainboard/broadcom/blast/Options.lb
===================================================================
--- LinuxBIOSv2-printk_car/src/mainboard/broadcom/blast/Options.lb (revision 3808)
+++ LinuxBIOSv2-printk_car/src/mainboard/broadcom/blast/Options.lb (working copy)
@@ -64,6 +64,7 @@
uses DCACHE_RAM_BASE
uses DCACHE_RAM_SIZE
uses CONFIG_USE_INIT
+uses CONFIG_USE_PRINTK_IN_CAR
uses SB_HT_CHAIN_UNITID_OFFSET_ONLY
@@ -214,6 +215,8 @@
##
default CONFIG_GDB_STUB=0
+default CONFIG_USE_PRINTK_IN_CAR=1
+
##
## The Serial Console
##
Index: LinuxBIOSv2-printk_car/src/mainboard/tyan/s2850/Options.lb
===================================================================
--- LinuxBIOSv2-printk_car/src/mainboard/tyan/s2850/Options.lb (revision 3808)
+++ LinuxBIOSv2-printk_car/src/mainboard/tyan/s2850/Options.lb (working copy)
@@ -60,6 +60,7 @@
uses DCACHE_RAM_BASE
uses DCACHE_RAM_SIZE
uses CONFIG_USE_INIT
+uses CONFIG_USE_PRINTK_IN_CAR
###
### Build options
@@ -199,6 +200,8 @@
##
default CONFIG_GDB_STUB=0
+default CONFIG_USE_PRINTK_IN_CAR=1
+
##
## The Serial Console
##
Index: LinuxBIOSv2-printk_car/src/mainboard/tyan/s2880/Options.lb
===================================================================
--- LinuxBIOSv2-printk_car/src/mainboard/tyan/s2880/Options.lb (revision 3808)
+++ LinuxBIOSv2-printk_car/src/mainboard/tyan/s2880/Options.lb (working copy)
@@ -60,6 +60,7 @@
uses DCACHE_RAM_BASE
uses DCACHE_RAM_SIZE
uses CONFIG_USE_INIT
+uses CONFIG_USE_PRINTK_IN_CAR
###
### Build options
@@ -199,6 +200,8 @@
##
default CONFIG_GDB_STUB=0
+default CONFIG_USE_PRINTK_IN_CAR=1
+
##
## The Serial Console
##
Index: LinuxBIOSv2-printk_car/src/mainboard/tyan/s2881/Options.lb
===================================================================
--- LinuxBIOSv2-printk_car/src/mainboard/tyan/s2881/Options.lb (revision 3808)
+++ LinuxBIOSv2-printk_car/src/mainboard/tyan/s2881/Options.lb (working copy)
@@ -65,6 +65,7 @@
uses DCACHE_RAM_BASE
uses DCACHE_RAM_SIZE
uses CONFIG_USE_INIT
+uses CONFIG_USE_PRINTK_IN_CAR
###
### Build options
@@ -216,6 +217,8 @@
##
default CONFIG_GDB_STUB=0
+default CONFIG_USE_PRINTK_IN_CAR=1
+
##
## The Serial Console
##
Index: LinuxBIOSv2-printk_car/src/mainboard/tyan/s4880/Options.lb
===================================================================
--- LinuxBIOSv2-printk_car/src/mainboard/tyan/s4880/Options.lb (revision 3808)
+++ LinuxBIOSv2-printk_car/src/mainboard/tyan/s4880/Options.lb (working copy)
@@ -60,6 +60,7 @@
uses DCACHE_RAM_BASE
uses DCACHE_RAM_SIZE
uses CONFIG_USE_INIT
+uses CONFIG_USE_PRINTK_IN_CAR
uses ENABLE_APIC_EXT_ID
uses APIC_ID_OFFSET
@@ -208,6 +209,8 @@
##
default CONFIG_GDB_STUB=0
+default CONFIG_USE_PRINTK_IN_CAR=1
+
##
## The Serial Console
##
Index: LinuxBIOSv2-printk_car/src/mainboard/tyan/s2891/Options.lb
===================================================================
--- LinuxBIOSv2-printk_car/src/mainboard/tyan/s2891/Options.lb (revision 3808)
+++ LinuxBIOSv2-printk_car/src/mainboard/tyan/s2891/Options.lb (working copy)
@@ -61,6 +61,7 @@
uses DCACHE_RAM_BASE
uses DCACHE_RAM_SIZE
uses CONFIG_USE_INIT
+uses CONFIG_USE_PRINTK_IN_CAR
uses ENABLE_APIC_EXT_ID
uses APIC_ID_OFFSET
@@ -233,6 +234,8 @@
##
default CONFIG_GDB_STUB=0
+default CONFIG_USE_PRINTK_IN_CAR=1
+
##
## The Serial Console
##
Index: LinuxBIOSv2-printk_car/src/mainboard/tyan/s2882/Options.lb
===================================================================
--- LinuxBIOSv2-printk_car/src/mainboard/tyan/s2882/Options.lb (revision 3808)
+++ LinuxBIOSv2-printk_car/src/mainboard/tyan/s2882/Options.lb (working copy)
@@ -60,6 +60,7 @@
uses DCACHE_RAM_BASE
uses DCACHE_RAM_SIZE
uses CONFIG_USE_INIT
+uses CONFIG_USE_PRINTK_IN_CAR
###
### Build options
@@ -199,6 +200,8 @@
##
default CONFIG_GDB_STUB=0
+default CONFIG_USE_PRINTK_IN_CAR=1
+
##
## The Serial Console
##
Index: LinuxBIOSv2-printk_car/src/mainboard/tyan/s2892/Options.lb
===================================================================
--- LinuxBIOSv2-printk_car/src/mainboard/tyan/s2892/Options.lb (revision 3808)
+++ LinuxBIOSv2-printk_car/src/mainboard/tyan/s2892/Options.lb (working copy)
@@ -61,6 +61,7 @@
uses DCACHE_RAM_BASE
uses DCACHE_RAM_SIZE
uses CONFIG_USE_INIT
+uses CONFIG_USE_PRINTK_IN_CAR
uses HT_CHAIN_UNITID_BASE
uses HT_CHAIN_END_UNITID_BASE
@@ -221,6 +222,8 @@
##
default CONFIG_GDB_STUB=0
+default CONFIG_USE_PRINTK_IN_CAR=1
+
##
## The Serial Console
##
Index: LinuxBIOSv2-printk_car/src/mainboard/tyan/s4882/Options.lb
===================================================================
--- LinuxBIOSv2-printk_car/src/mainboard/tyan/s4882/Options.lb (revision 3808)
+++ LinuxBIOSv2-printk_car/src/mainboard/tyan/s4882/Options.lb (working copy)
@@ -60,6 +60,7 @@
uses DCACHE_RAM_BASE
uses DCACHE_RAM_SIZE
uses CONFIG_USE_INIT
+uses CONFIG_USE_PRINTK_IN_CAR
uses ENABLE_APIC_EXT_ID
uses APIC_ID_OFFSET
@@ -207,6 +208,8 @@
##
default CONFIG_GDB_STUB=0
+default CONFIG_USE_PRINTK_IN_CAR=1
+
##
## The Serial Console
##
Index: LinuxBIOSv2-printk_car/src/mainboard/tyan/s2875/Options.lb
===================================================================
--- LinuxBIOSv2-printk_car/src/mainboard/tyan/s2875/Options.lb (revision 3808)
+++ LinuxBIOSv2-printk_car/src/mainboard/tyan/s2875/Options.lb (working copy)
@@ -60,6 +60,7 @@
uses DCACHE_RAM_BASE
uses DCACHE_RAM_SIZE
uses CONFIG_USE_INIT
+uses CONFIG_USE_PRINTK_IN_CAR
###
### Build options
@@ -200,6 +201,8 @@
##
default CONFIG_GDB_STUB=0
+default CONFIG_USE_PRINTK_IN_CAR=1
+
##
## The Serial Console
##
Index: LinuxBIOSv2-printk_car/src/mainboard/tyan/s2885/Options.lb
===================================================================
--- LinuxBIOSv2-printk_car/src/mainboard/tyan/s2885/Options.lb (revision 3808)
+++ LinuxBIOSv2-printk_car/src/mainboard/tyan/s2885/Options.lb (working copy)
@@ -60,6 +60,7 @@
uses DCACHE_RAM_BASE
uses DCACHE_RAM_SIZE
uses CONFIG_USE_INIT
+uses CONFIG_USE_PRINTK_IN_CAR
uses ENABLE_APIC_EXT_ID
uses APIC_ID_OFFSET
@@ -226,6 +227,8 @@
##
default CONFIG_GDB_STUB=0
+default CONFIG_USE_PRINTK_IN_CAR=1
+
##
## The Serial Console
##
Index: LinuxBIOSv2-printk_car/src/mainboard/tyan/s2895/Options.lb
===================================================================
--- LinuxBIOSv2-printk_car/src/mainboard/tyan/s2895/Options.lb (revision 3808)
+++ LinuxBIOSv2-printk_car/src/mainboard/tyan/s2895/Options.lb (working copy)
@@ -64,6 +64,7 @@
uses DCACHE_RAM_BASE
uses DCACHE_RAM_SIZE
uses CONFIG_USE_INIT
+uses CONFIG_USE_PRINTK_IN_CAR
uses SERIAL_CPU_INIT
@@ -243,6 +244,8 @@
##
default CONFIG_GDB_STUB=0
+default CONFIG_USE_PRINTK_IN_CAR=1
+
##
## The Serial Console
##
Index: LinuxBIOSv2-printk_car/src/mainboard/msi/ms7135/Options.lb
===================================================================
--- LinuxBIOSv2-printk_car/src/mainboard/msi/ms7135/Options.lb (revision 3808)
+++ LinuxBIOSv2-printk_car/src/mainboard/msi/ms7135/Options.lb (working copy)
@@ -87,6 +87,7 @@
uses CONFIG_USE_INIT
uses DCACHE_RAM_GLOBAL_VAR_SIZE
uses CONFIG_AP_CODE_IN_CAR
+uses CONFIG_USE_PRINTK_IN_CAR
uses MEM_TRAIN_SEQ
uses WAIT_BEFORE_CPUS_INIT
@@ -271,6 +272,8 @@
##
default CONFIG_GDB_STUB=0
+default CONFIG_USE_PRINTK_IN_CAR=1
+
##
## The Serial Console
##
Index: LinuxBIOSv2-printk_car/src/mainboard/arima/hdama/Options.lb
===================================================================
--- LinuxBIOSv2-printk_car/src/mainboard/arima/hdama/Options.lb (revision 3808)
+++ LinuxBIOSv2-printk_car/src/mainboard/arima/hdama/Options.lb (working copy)
@@ -56,6 +56,7 @@
uses DCACHE_RAM_BASE
uses DCACHE_RAM_SIZE
uses CONFIG_USE_INIT
+uses CONFIG_USE_PRINTK_IN_CAR
###
### Build options
@@ -191,6 +192,8 @@
##
default CONFIG_GDB_STUB=0
+default CONFIG_USE_PRINTK_IN_CAR=1
+
##
## The Serial Console
##
Index: LinuxBIOSv2-printk_car/src/mainboard/sunw/ultra40/Options.lb
===================================================================
--- LinuxBIOSv2-printk_car/src/mainboard/sunw/ultra40/Options.lb (revision 3808)
+++ LinuxBIOSv2-printk_car/src/mainboard/sunw/ultra40/Options.lb (working copy)
@@ -61,6 +61,7 @@
uses DCACHE_RAM_BASE
uses DCACHE_RAM_SIZE
uses CONFIG_USE_INIT
+uses CONFIG_USE_PRINTK_IN_CAR
uses ENABLE_APIC_EXT_ID
uses APIC_ID_OFFSET
@@ -231,6 +232,8 @@
##
default CONFIG_GDB_STUB=0
+default CONFIG_USE_PRINTK_IN_CAR=1
+
##
## The Serial Console
##
Index: LinuxBIOSv2-printk_car/src/mainboard/newisys/khepri/Options.lb
===================================================================
--- LinuxBIOSv2-printk_car/src/mainboard/newisys/khepri/Options.lb (revision 3808)
+++ LinuxBIOSv2-printk_car/src/mainboard/newisys/khepri/Options.lb (working copy)
@@ -59,6 +59,7 @@
uses DCACHE_RAM_BASE
uses DCACHE_RAM_SIZE
uses CONFIG_USE_INIT
+uses CONFIG_USE_PRINTK_IN_CAR
###
### Build options
@@ -198,6 +199,8 @@
##
default CONFIG_GDB_STUB=0
+default CONFIG_USE_PRINTK_IN_CAR=1
+
##
## The Serial Console
##
Index: LinuxBIOSv2-printk_car/src/mainboard/ibm/e326/Options.lb
===================================================================
--- LinuxBIOSv2-printk_car/src/mainboard/ibm/e326/Options.lb (revision 3808)
+++ LinuxBIOSv2-printk_car/src/mainboard/ibm/e326/Options.lb (working copy)
@@ -51,6 +51,7 @@
uses DCACHE_RAM_BASE
uses DCACHE_RAM_SIZE
uses CONFIG_USE_INIT
+uses CONFIG_USE_PRINTK_IN_CAR
###
@@ -176,6 +177,8 @@
default CC="$(CROSS_COMPILE)gcc -m32"
default HOSTCC="gcc"
+default CONFIG_USE_PRINTK_IN_CAR=1
+
##
## The Serial Console
##
Index: LinuxBIOSv2-printk_car/src/mainboard/ibm/e325/Options.lb
===================================================================
--- LinuxBIOSv2-printk_car/src/mainboard/ibm/e325/Options.lb (revision 3808)
+++ LinuxBIOSv2-printk_car/src/mainboard/ibm/e325/Options.lb (working copy)
@@ -49,6 +49,7 @@
uses DCACHE_RAM_BASE
uses DCACHE_RAM_SIZE
uses CONFIG_USE_INIT
+uses CONFIG_USE_PRINTK_IN_CAR
###
@@ -170,6 +171,8 @@
default CC="$(CROSS_COMPILE)gcc -m32"
default HOSTCC="gcc"
+default CONFIG_USE_PRINTK_IN_CAR=1
+
##
## The Serial Console
##
Index: LinuxBIOSv2-printk_car/src/mainboard/asus/a8n_e/Options.lb
===================================================================
--- LinuxBIOSv2-printk_car/src/mainboard/asus/a8n_e/Options.lb (revision 3808)
+++ LinuxBIOSv2-printk_car/src/mainboard/asus/a8n_e/Options.lb (working copy)
@@ -97,6 +97,7 @@
uses SB_HT_CHAIN_ON_BUS0
uses SB_HT_CHAIN_UNITID_OFFSET_ONLY
uses CONFIG_LB_MEM_TOPK
+uses CONFIG_USE_PRINTK_IN_CAR
default ROM_SIZE = 512 * 1024
default ROM_IMAGE_SIZE = 64 * 1024
@@ -157,6 +158,7 @@
default CC = "$(CROSS_COMPILE)gcc -m32"
default HOSTCC = "gcc"
default CONFIG_GDB_STUB = 0
+default CONFIG_USE_PRINTK_IN_CAR=1
default CONFIG_CONSOLE_SERIAL8250 = 1
default TTYS0_BAUD = 115200
default TTYS0_BASE = 0x3f8
Index: LinuxBIOSv2-printk_car/src/mainboard/agami/aruma/Options.lb
===================================================================
--- LinuxBIOSv2-printk_car/src/mainboard/agami/aruma/Options.lb (revision 3808)
+++ LinuxBIOSv2-printk_car/src/mainboard/agami/aruma/Options.lb (working copy)
@@ -179,7 +179,7 @@
default DCACHE_RAM_SIZE=0x4000
default CONFIG_USE_INIT=0
#default CONFIG_USE_INIT=1
-#default CONFIG_USE_PRINTK_IN_CAR=1
+default CONFIG_USE_PRINTK_IN_CAR=1
##
## Build code to setup a generic IOAPIC
Index: LinuxBIOSv2-printk_car/targets/agami/aruma/Config-abuild.lb
===================================================================
--- LinuxBIOSv2-printk_car/targets/agami/aruma/Config-abuild.lb (revision 0)
+++ LinuxBIOSv2-printk_car/targets/agami/aruma/Config-abuild.lb (revision 0)
@@ -0,0 +1,26 @@
+# This will make a target directory of ./VENDOR_MAINBOARD
+
+target VENDOR_MAINBOARD
+mainboard VENDOR/MAINBOARD
+
+option CC="CROSSCC"
+option CROSS_COMPILE="CROSS_PREFIX"
+option HOSTCC="CROSS_HOSTCC"
+
+__COMPRESSION__
+
+option DEFAULT_CONSOLE_LOGLEVEL=7
+option MAXIMUM_CONSOLE_LOGLEVEL=7
+
+option ROM_SIZE = (1024*1024)
+option FALLBACK_SIZE = (1024*1024)
+
+romimage "fallback"
+ option USE_FALLBACK_IMAGE=1
+ option ROM_IMAGE_SIZE=0x16000
+ option XIP_ROM_SIZE=0x20000
+ option COREBOOT_EXTRA_VERSION=".0-fallback"
+ payload __PAYLOAD__
+end
+
+buildrom ./coreboot.rom ROM_SIZE "fallback"
--
http://www.hailfinger.org/
More information about the coreboot
mailing list