[coreboot] RS690 HT init
Carl-Daniel Hailfinger
c-d.hailfinger.devel.2006 at gmx.net
Tue Dec 23 04:32:41 CET 2008
On 12.12.2008 06:35, Bao, Zheng wrote:
> It is great to remind me that.
>
> I knew this issue when I did the 690 code. The board I worked with
> seemed to support just 800Mhz HT link, which doesn't need any more
> setting when HT is set up. Then I ignore this. Then I had to move on.
>
> As a matter of fact, both 600Mhz and 1Ghz have their own specific
> setting. I thought rs690_htinit should be removed from
> rs690_early_setup() and called after optimize_link_incoherent_ht().
>
> Zheng (Joe)
>
> -----Original Message-----
> From: coreboot-bounces at coreboot.org
> [mailto:coreboot-bounces at coreboot.org] On Behalf Of Carl-Daniel
> Hailfinger
> Sent: Friday, December 12, 2008 12:25 PM
> To: Coreboot
> Subject: [coreboot] RS690 HT init
>
> Hi,
>
> it seems that rs690_htinit() does nothing (it only prints some data). Is
> that intentional?
>
> The RS690 chipset has a problem where it will not work with 1 GHz HT
> speed unless NB_CFG_Q_F1000_800 bit 0 is set. I think we could add code
> for this to rs690_htinit().
>
Handle RS690 quirks for 1 GHz noncoherent HyperTransport.
Tested, works on my Asus M2A-VM with an 1 GHz HT capable processor.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006 at gmx.net>
Index: southbridge/amd/rs690/rs690_early_setup.c
===================================================================
--- southbridge/amd/rs690/rs690_early_setup.c (Revision 3837)
+++ southbridge/amd/rs690/rs690_early_setup.c (Arbeitskopie)
@@ -2,6 +2,7 @@
* This file is part of the coreboot project.
*
* Copyright (C) 2008 Advanced Micro Devices, Inc.
+ * Copyright (C) 2008 Carl-Daniel Hailfinger
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -175,8 +176,9 @@
/*
* About HT, it has been done in enumerate_ht_chain().
*/
- device_t k8_f0;
+ device_t k8_f0, rs690_f0;
u32 reg;
+ u8 reg8;
u8 k8_ht_freq;
k8_f0 = PCI_DEV(0, 0x18, 0);
@@ -195,7 +197,22 @@
************************/
reg = pci_read_config32(k8_f0, 0x88);
k8_ht_freq = (reg & 0xf00) >> 8;
- printk_info("rs690_ht_init k8_ht_freq=%x.\n", k8_ht_freq);
+ printk_spew("rs690_htinit k8_ht_freq=%x.\n", k8_ht_freq);
+ rs690_f0 = PCI_DEV(0, 0, 0);
+ reg8 = pci_read_config8(rs690_f0, 0x9c);
+ printk_spew("rs690_htinit NB_CFG_Q_F1000_800=%x\n", reg8);
+ /* For 1000 MHz HT, NB_CFG_Q_F1000_800 bit 0 MUST be set.
+ * For any other HT frequency, NB_CFG_Q_F1000_800 bit 0 MUST NOT be set.
+ */
+ if (((k8_ht_freq == 0x6) || (k8_ht_freq == 0xf)) && (!(reg8 & 0x1))) {
+ printk_info("rs690_htinit setting bit 0 in NB_CFG_Q_F1000_800 to use 1 GHz HT\n");
+ reg8 |= 0x1;
+ pci_write_config8(rs690_f0, 0x9c, reg8);
+ } else if ((k8_ht_freq != 0x6) && (k8_ht_freq != 0xf) && (reg8 & 0x1)) {
+ printk_info("rs690_htinit clearing bit 0 in NB_CFG_Q_F1000_800 to not use 1 GHz HT\n");
+ reg8 &= ~0x1;
+ pci_write_config8(rs690_f0, 0x9c, reg8);
+ }
}
/*******************************************************
@@ -462,7 +479,6 @@
break;
}
- rs690_htinit();
k8_optimization();
rs690_por_init(nb_dev);
}
Index: mainboard/amd/dbm690t/cache_as_ram_auto.c
===================================================================
--- mainboard/amd/dbm690t/cache_as_ram_auto.c (Revision 3837)
+++ mainboard/amd/dbm690t/cache_as_ram_auto.c (Arbeitskopie)
@@ -210,6 +210,7 @@
needs_reset = optimize_link_coherent_ht();
needs_reset |= optimize_link_incoherent_ht(sysinfo);
+ rs690_htinit();
printk_debug("needs_reset=0x%x\n", needs_reset);
Index: mainboard/amd/pistachio/cache_as_ram_auto.c
===================================================================
--- mainboard/amd/pistachio/cache_as_ram_auto.c (Revision 3837)
+++ mainboard/amd/pistachio/cache_as_ram_auto.c (Arbeitskopie)
@@ -213,6 +213,7 @@
needs_reset = optimize_link_coherent_ht();
needs_reset |= optimize_link_incoherent_ht(sysinfo);
+ rs690_htinit();
printk_debug("needs_reset=0x%x\n", needs_reset);
post_code(0x06);
--
http://www.hailfinger.org/
-------------- next part --------------
A non-text attachment was scrubbed...
Name: linuxbios_rs690_ht_1ghz_onoff.diff
Type: text/x-patch
Size: 2792 bytes
Desc: not available
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20081223/811ffb63/attachment.diff>
More information about the coreboot
mailing list