[coreboot] UPDATE: lspci -tvnn, superiotool -dV, flashrom -V, for the MSI 6119 mainboard

Mon Jan 14 11:44:14 CET 2008

Hi all,

Most of you already received the email displayed below. Later that day I
spoke Uwe on IRC and he told me he had fogot to tell me I had to include the
irq_tables.c as generated by getpir as well. So, here it is in the
attachments. In case your mailing systems do not forward attachments, here
are the contents of that file:

/* This file was generated by getpir.c, do not modify!
 * (but if you do, please run checkpir on it to verify)
 *
 * Contains the IRQ Routing Table dumped directly from your
 * memory, which BIOS sets up.
 *
 * Documentation at: http://www.microsoft.com/whdc/archive/pciirq.mspx
 */

#ifdef GETPIR
#include "pirq_routing.h"
#else
#include <arch/pirq_routing.h>
#endif

const struct irq_routing_table intel_irq_routing_table = {
    PIRQ_SIGNATURE,  /* u32 signature */
    PIRQ_VERSION,    /* u16 version   */
    32+16*7,     /* There can be total 7 devices on the bus */
    0x00,         /* Where the interrupt router lies (bus) */
    (0x07<<3)|0x0,   /* Where the interrupt router lies (dev) */
    0x800,         /* IRQs devoted exclusively to PCI usage */
    0x8086,         /* Vendor */
    0x7000,         /* Device */
    0,         /* Crap (miniport) */
    { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */
    0x9c,         /* u8 checksum. This has to be set to some
                value that would give 0 after the sum of all
                bytes for this structure (including checksum) */
    {
        /* bus,     dev|fn,   {link, bitmap}, {link, bitmap}, {link,
bitmap}, {link, bitmap},  slot, rfu */
        {0x00,(0x0e<<3)|0x0, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62,
0xdeb8}, {0x63, 0x0deb8}}, 0x1, 0x0},
        {0x00,(0x10<<3)|0x0, {{0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63,
0xdeb8}, {0x60, 0x0deb8}}, 0x2, 0x0},
        {0x00,(0x12<<3)|0x0, {{0x62, 0xdeb8}, {0x63, 0xdeb8}, {0x60,
0xdeb8}, {0x61, 0x0deb8}}, 0x3, 0x0},
        {0x00,(0x14<<3)|0x0, {{0x63, 0xdeb8}, {0x60, 0xdeb8}, {0x61,
0xdeb8}, {0x62, 0x0deb8}}, 0x4, 0x0},
        {0x00,(0x07<<3)|0x1, {{0x00, 0xdeb8}, {0x00, 0xdeb8}, {0x00,
0xdeb8}, {0x00, 0x0deb8}}, 0x0, 0x0},
        {0x00,(0x07<<3)|0x2, {{0x00, 0xdeb8}, {0x00, 0xdeb8}, {0x00,
0xdeb8}, {0x63, 0x0deb8}}, 0x0, 0x0},
        {0x00,(0x01<<3)|0x0, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62,
0xdeb8}, {0x63, 0x0deb8}}, 0x0, 0x0},
    }
};

greetz from Holland,

Maarten "merethan"

On Jan 13, 2008 12:50 PM, Maarten van Eeuwijk <mechno at gmail.com> wrote:

> Hi all,
>
> A few day's ago I asked Uwe for a little help on my MS6119 board from MSI.
> He adviced me to post the results of lspci -tvnn, superiotool -dV
> and flashrom -V to the mailing list, for the sake of archiving.
> So, after some creative wiring I got a LiveCD going and ran the pieces of
> software mentioned above.
>
> The tests are done with minimal hardware, all the PCI slots were empty.
> The only slots filled were the CPU slot and the AGP slot.
>
> For the ones who think they recognize a Asus p2b here, you're almost dead
> on. The MS6119 has the same hardware and similair layout but the wiring is
> likely to be different.
>
> Here are the results:
>
> *lspci -tvnn:*
> -[0000:00]-+-00.0  8086:7190
>            +-01.0-[0000:01]----00.0  1002:4742
>            +-07.0  8086:7110
>            +-07.1  8086:7111
>            +-07.2  8086:7112
>            \-07.3  8086:7113
>
>
> *superiotool -dV:*
> superiotool r3011
> Probing for ALi Super I/O at 0x3f0...
>   Failed. Returned data: id=0xffff, rev=0xff
> Probing for ALi Super I/O at 0x370...
>   Failed. Returned data: id=0xffff, rev=0xff
> Probing for Fintek Super I/O at 0x2e...
>   Failed. Returned data: vid=0xffff, id=0xffff
> Probing for Fintek Super I/O at 0x4e...
>   Failed. Returned data: vid=0xffff, id=0xffff
> Probing for ITE Super I/O (init=0x87,0x01,0x55,0x55/0xaa) at 0x2e...
>   Failed. Returned data: id=0xffff, rev=0xf
> Probing for ITE Super I/O (init=0x87,0x87) at 0x2e...
>   Failed. Returned data: id=0xffff, rev=0xf
> Probing for ITE Super I/O (init=0x87,0x01,0x55,0x55/0xaa) at 0x4e...
>   Failed. Returned data: id=0xffff, rev=0xf
> Probing for ITE Super I/O (init=0x87,0x87) at 0x4e...
>   Failed. Returned data: id=0xffff, rev=0xf
> Probing for NSC Super I/O at 0x2e...
>   Failed. Returned data: port=0xff, port+1=0xff
> Probing for NSC Super I/O at 0x4e...
>   Failed. Returned data: port=0xff, port+1=0xff
> Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x2e...
>   Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x2e...
>   Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x4e...
>   Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x4e...
>   Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x162e...
>   Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x162e...
>   Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x164e...
>   Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x164e...
>   Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x3f0...
>   Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x3f0...
>   Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x370...
>   Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x370...
>   Failed. Returned data: id=0xff, rev=0xff
> Probing for Winbond Super I/O (init=0x88) at 0x2e...
>   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x89) at 0x2e...
>   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x86,0x86) at 0x2e...
>   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x87,0x87) at 0x2e...
>   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x88) at 0x4e...
>   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x89) at 0x4e...
>   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x86,0x86) at 0x4e...
>   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x87,0x87) at 0x4e...
>   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x88) at 0x3f0...
>   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x89) at 0x3f0...
>   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x86,0x86) at 0x3f0...
>   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x87,0x87) at 0x3f0...
> Found Winbond W83977TF (id=0x97, rev=0x73) at 0x3f0
> Register dump:
> idx 20 21 22 23 24 25 26 28  2a 2b 2c 2d 2e 2f
> val 97 73 ff fe 84 00 00 00  00 00 00 00 00 ff
> def 97 73 ff fe MM 00 MM 00  00 00 00 RR RR RR
> LDN 0x00 (Floppy)
> idx 30 60 61 70 74 f0 f1 f2  f4 f5
> val 01 03 f0 06 02 0e 00 ff  00 00
> def 01 03 f0 06 02 0e 00 ff  00 00
> LDN 0x01 (Parallel port)
> idx 30 60 61 70 74 f0
> val 01 03 78 07 03 00
> def 01 03 78 07 04 3f
> LDN 0x02 (COM1)
> idx 30 60 61 70 f0
> val 01 03 f8 04 00
> def 01 03 f8 04 00
> LDN 0x03 (COM2)
> idx 30 60 61 70 f0 f1
> val 01 02 f8 03 00 00
> def 01 02 f8 03 00 00
> LDN 0x05 (Keyboard / mouse)
> idx 30 60 61 62 63 70 72 f0
> val 01 00 60 00 64 01 00 42
> def 01 00 60 00 64 01 0c 83
> LDN 0x07 (GPIO 1)
> idx 30 60 61 62 63 64 65 70  72 e0 e1 e2 e3 e4 e5 e6  e7 f1
> val 00 00 00 00 00 00 00 00  00 01 01 01 01 01 01 01  01 00
> def 00 00 00 00 00 00 00 00  00 01 01 01 01 01 01 01  01 00
> LDN 0x08 (GPIO 2)
> idx 30 60 61 70 72 e8 e9 ea  eb ec ed ee f0 f1 f2 f3  f4
> val 01 00 00 00 00 10 01 01  01 01 08 01 00 ff 00 00  00
> def 00 00 00 00 00 01 01 01  01 01 01 01 00 RR 00 00  00
> LDN 0x09 (GPIO 3)
> idx 30 60 61 62 63 64 65 70  72 e0 e1 e2 e3 e4 e5 e6  e7 f1
> val 00 00 00 00 00 00 00 00  00 01 01 01 01 01 01 01  01 00
> def 00 00 00 00 00 00 00 00  00 01 01 01 01 01 01 01  01 00
> LDN 0x0a (ACPI)
> idx 30 60 61 62 63 64 65 70  e0 e1 02 e3 e4 f0 f1 f2  f3 f4 f5 f6 f7 fe ff
>
> val 00 00 00 00 00 00 00 00  00 00 ff 07 00 00 00 0f  07 00 00 00 00 00 00
> def 00 00 00 00 00 00 00 00  00 00 NA MM RR 00 00 00  00 00 00 00 00 RR RR
> Probing for Winbond Super I/O (init=0x88) at 0x370...
>   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x89) at 0x370...
>   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x86,0x86) at 0x370...
>   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x87,0x87) at 0x370...
>   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x88) at 0x250...
>   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x89) at 0x250...
>   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x86,0x86) at 0x250...
>   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x87,0x87) at 0x250...
>   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
>
>
> *flashrom -V:*
> Calibrating delay loop... 100M loops per second. OK.
> No LinuxBIOS table found.
> Found chipset "PIIX4/PIIX4E/PIIX4M", enabling flash write... OK.
> Probing for Am29F040B, 512 KB
> probe_29f040b: id1 0x7f, id2 0x3f
> Probing for Am29LV040B, 512 KB
> probe_29f040b: id1 0x7f, id2 0x3f
> Probing for Am29F016D, 2048 KB
> probe_29f040b: id1 0xff, id2 0xff
> Probing for AE49F2008, 256 KB
> probe_jedec: id1 0xda, id2 0x45
> Probing for At29C040A, 512 KB
> probe_jedec: id1 0xda, id2 0x45
> Probing for At29C020, 256 KB
> probe_jedec: id1 0xda, id2 0x45
> Probing for At49F002(N), 256 KB
> probe_jedec: id1 0xda, id2 0x45
> Probing for At49F002(N)T, 256 KB
> probe_jedec: id1 0xda, id2 0x45
> Probing for EN29F002(A)(N)T, 256 KB
> probe_jedec: id1 0xda, id2 0x45
> Probing for EN29F002(A)(N)B, 256 KB
> probe_jedec: id1 0xda, id2 0x45
> Probing for MBM29F400TC, 512 KB
> probe_m29f400bt: id1 0x7f, id2 0x3f
> Probing for MX29F002, 256 KB
> probe_29f002: id1 0xda, id2 0x45
> Probing for MX25L4005, 512 KB
> generic_spi_command called, but no SPI chipset detected
> Probing for MX25L8005, 1024 KB
> generic_spi_command called, but no SPI chipset detected
> Probing for SST25VF040B, 512 KB
> generic_spi_command called, but no SPI chipset detected
> Probing for SST25VF016B, 2048 KB
> generic_spi_command called, but no SPI chipset detected
> Probing for SST29EE020A, 256 KB
> probe_jedec: id1 0xda, id2 0x45
> Probing for SST28SF040A, 512 KB
> probe_28sf040: id1 0x7f, id2 0x3f
> Probing for SST39SF010A, 128 KB
> probe_jedec: id1 0xda, id2 0x45
> Probing for SST39SF020A, 256 KB
> probe_jedec: id1 0xda, id2 0x45
> Probing for SST39SF040, 512 KB
> probe_jedec: id1 0xda, id2 0x45
> Probing for SST39VF020, 256 KB
> probe_jedec: id1 0xda, id2 0x45
> Probing for SST49LF040B, 512 KB
> probe_jedec: id1 0xda, id2 0x45
> Probing for SST49LF040, 512 KB
> probe_jedec: id1 0xda, id2 0x45
> Probing for SST49LF020A, 256 KB
> probe_jedec: id1 0xda, id2 0x45
> Probing for SST49LF080A, 1024 KB
> probe_jedec: id1 0xda, id2 0x45
> Probing for SST49LF002A/B, 256 KB
> probe_jedec: id1 0xda, id2 0x45
> Probing for SST49LF003A/B, 384 KB
> probe_jedec: id1 0xda, id2 0x45
> Probing for SST49LF004A/B, 512 KB
> probe_jedec: id1 0xda, id2 0x45
> Probing for SST49LF008A, 1024 KB
> probe_jedec: id1 0xda, id2 0x45
> Probing for SST49LF004C, 512 KB
> probe_49lfxxxc: id1 0x7f, id2 0x3f
> Probing for SST49LF008C, 1024 KB
> probe_49lfxxxc: id1 0x7f, id2 0x3f
> Probing for SST49LF016C, 2048 KB
> probe_49lfxxxc: id1 0xff, id2 0xff
> Probing for SST49LF160C, 2048 KB
> probe_49lfxxxc: id1 0xff, id2 0xff
> Probing for Pm49FL002, 256 KB
> probe_jedec: id1 0xda, id2 0x45
> Probing for Pm49FL004, 512 KB
> probe_jedec: id1 0xda, id2 0x45
> Probing for W29C011, 128 KB
> probe_jedec: id1 0xda, id2 0x45
> Probing for W29C040P, 512 KB
> probe_jedec: id1 0xda, id2 0x45
> Probing for W29C020C, 256 KB
> probe_jedec: id1 0xda, id2 0x45
> W29C020C found at physical address 0xfffc0000.
> Flash part is W29C020C (256 KB).
> No operations were specified.
>
> That's it.
>
> Uwe told me he could help me with hacking up a MS6119 target file with
> this info.
> Once the bios works, I 'll use it to make a router of that board utilizing
> coreboot, m0n0wall, a few ethernet NIC's and a Compact flash card.
> Once that works I will demonstrate it at school. Perhaps I 'll put it
> against a Cisco router in a VS showdown on troughput.
> Might be cool to beat a 800+ bucks Cisco machine with an old piece of
> hardware I found in a trashbox.
>
>
> tnx for your time,
>
> Maarten "merethan"
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20080114/6b8e9e0e/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: irq_tables.c
Type: text/x-csrc
Size: 1839 bytes
Desc: not available
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20080114/6b8e9e0e/attachment.c>

[coreboot] *UPDATE*: lspci -tvnn, superiotool -dV, flashrom -V, for the MSI 6119 mainboard

[coreboot] UPDATE: lspci -tvnn, superiotool -dV, flashrom -V, for the MSI 6119 mainboard