[coreboot] r96 - in buildrom-devel: . config/platforms packages/linuxbios packages/linuxbiosv3 scripts
svn at openbios.org
svn at openbios.org
Fri Jan 18 17:57:20 CET 2008
Author: jcrouse
Date: 2008-01-18 17:57:20 +0100 (Fri, 18 Jan 2008)
New Revision: 96
Modified:
buildrom-devel/Config.in
buildrom-devel/Makefile
buildrom-devel/README
buildrom-devel/config/platforms/Config.in
buildrom-devel/config/platforms/alix1c.conf
buildrom-devel/config/platforms/db800.conf
buildrom-devel/config/platforms/dbe61.conf
buildrom-devel/config/platforms/ga-2761gxdk.conf
buildrom-devel/config/platforms/m57sli.conf
buildrom-devel/config/platforms/msm800sev.conf
buildrom-devel/config/platforms/norwich.conf
buildrom-devel/config/platforms/platforms.conf
buildrom-devel/config/platforms/qemu.conf
buildrom-devel/config/platforms/serengeti_cheetah.conf
buildrom-devel/config/platforms/supermicro-h8dmr.conf
buildrom-devel/config/platforms/tyan-s2882.conf
buildrom-devel/config/platforms/tyan-s2891.conf
buildrom-devel/packages/linuxbios/alix1c-linuxbios.mk
buildrom-devel/packages/linuxbios/ga-2761gxdk-linuxbios.mk
buildrom-devel/packages/linuxbios/generic-linuxbios.mk
buildrom-devel/packages/linuxbios/linuxbios.inc
buildrom-devel/packages/linuxbios/m57sli-linuxbios.mk
buildrom-devel/packages/linuxbios/msm800sev-linuxbios.mk
buildrom-devel/packages/linuxbios/norwich-linuxbios.mk
buildrom-devel/packages/linuxbios/optionroms.inc
buildrom-devel/packages/linuxbios/qemu.mk
buildrom-devel/packages/linuxbios/serengeti_cheetah.mk
buildrom-devel/packages/linuxbios/supermicro-h8dmr-linuxbios.mk
buildrom-devel/packages/linuxbios/tyan-s2882-linuxbios.mk
buildrom-devel/packages/linuxbios/tyan-s2891-linuxbios.mk
buildrom-devel/packages/linuxbiosv3/linuxbiosv3.mk
buildrom-devel/scripts/defconfig
Log:
[BUILDROM] rename LinuxBIOS to coreboot
Rename linuxBIOS to coreboot and fix it so the naming is consistant between
v2 and v3.
Signed-off-by: Jordan Crouse <jordan.crouse at amd.com>
Acked-by: Stefan Reinauer <stepan at coresystems.de>
Acked-by: Uwe Hermann <uwe at hermann-uwe.de>
Modified: buildrom-devel/Config.in
===================================================================
--- buildrom-devel/Config.in 2008-01-11 22:53:36 UTC (rev 95)
+++ buildrom-devel/Config.in 2008-01-18 16:57:20 UTC (rev 96)
@@ -45,24 +45,24 @@
endmenu
-menu "LinuxBIOS configuration"
+menu "coreboot configuration"
choice
- prompt "LinuxBIOS Version"
- default LINUXBIOS_V2
+ prompt "coreboot version"
+ default COREBOOT_V2
-config LINUXBIOS_V2
- bool "LinuxBIOS v2"
+config COREBOOT_V2
+ bool "coreboot v2"
help
- Select this option to build a .rom based on the LinuxBIOS
+ Select this option to build a .rom based on the coreboot
v2 code. The v2 code is far more stable, and supports many
different platforms.
-config LINUXBIOS_V3
- bool "LinuxBIOS v3"
+config COREBOOT_V3
+ bool "coreboot v3"
depends EXPERIMENTAL
help
- Select this option to build a LinuxBIOS v3 based ROM. This
+ Select this option to build a coreboot v3 based ROM. This
is experimental, and only supports a few platforms.
endchoice
@@ -76,30 +76,30 @@
Precompress the payload with LZMA. This doesn't work
for FILO, OFW, or ETHERBOOT.
-config LB_USE_BUILD
- bool "Specify a LinuxBIOS build dir"
+config CB_USE_BUILD
+ bool "Specify a coreboot build dir"
depends ADVANCED
default n
help
Say 'y' here to specify an existing directory to build
- LinuxBIOS from - this is useful if you have local development
+ coreboot from - this is useful if you have local development
tree you wish to work from
-config LB_BUILDDIR
- string "LinuxBIOS build directory"
- depends LB_USE_BUILD
+config CB_BUILDDIR
+ string "coreboot build directory"
+ depends CB_USE_BUILD
-config LB_CUSTOM_REV
- bool "Override the platform LinuxBIOS revision"
- depends ADVANCED && !LB_USE_BUILD
+config CB_CUSTOM_REV
+ bool "Override the platform coreboot revision"
+ depends ADVANCED && !CB_USE_BUILD
default n
help
- Say 'y' here to overide the default LinuxBIOS SVN revsion
+ Say 'y' here to overide the default coreboot SVN revsion
from the platform configuration
-config LB_REVISION
- string "LinuxBIOS revision"
- depends LB_CUSTOM_REV
+config CB_REVISION
+ string "coreboot revision"
+ depends CB_CUSTOM_REV
endmenu
Modified: buildrom-devel/Makefile
===================================================================
--- buildrom-devel/Makefile 2008-01-11 22:53:36 UTC (rev 95)
+++ buildrom-devel/Makefile 2008-01-18 16:57:20 UTC (rev 96)
@@ -46,15 +46,15 @@
TARGET_ROM ?= linuxbios.rom
TARGET_ROM_FILE=$(OUTPUT_DIR)/$(TARGET_ROM)
-# Choose the version of LinuxBIOS to build - this might be better
+# Choose the version of coreboot to build - this might be better
# elsewhere, but what the heck - its easy.
-LINUXBIOS-$(CONFIG_LINUXBIOS_V2) = linuxbios
-LINUXBIOS-$(CONFIG_LINUXBIOS_V3) = linuxbiosv3 roms
+COREBOOT-$(CONFIG_COREBOOT_V2) = coreboot
+COREBOOT-$(CONFIG_COREBOOT_V3) = coreboot-v3 roms
# Construct the list of packages we will be building
-PKGLIST = $(LINUXBIOS-y) $(PAYLOAD-y) $(HOSTTOOLS-y)
+PKGLIST = $(COREBOOT-y) $(PAYLOAD-y) $(HOSTTOOLS-y)
# Construct the various targets
@@ -62,14 +62,14 @@
PKG_distclean=$(patsubst %, %-distclean, $(PKGLIST))
# This is the top level target - for v2, the final deliverable is built
-# by LinuxBIOS, for v3 it is built by us, so we have ifdef magic here
+# by coreboot, for v3 it is built by us, so we have ifdef magic here
-ifeq ($(CONFIG_LINUXBIOS_V2),y)
-rom: $(HOSTTOOLS-y) payload $(LINUXBIOS-y)
+ifeq ($(CONFIG_COREBOOT_V2),y)
+rom: $(HOSTTOOLS-y) payload $(COREBOOT-y)
else
-rom: $(HOSTTOOLS-y) payload $(LINUXBIOS-y)
- @ cp $(LBV3_OUTPUT) $(TARGET_ROM_FILE)
+rom: $(HOSTTOOLS-y) payload $(COREBOOT-y)
+ @ cp $(CBV3_OUTPUT) $(TARGET_ROM_FILE)
@ $(STAGING_DIR)/bin/lar -a $(TARGET_ROM_FILE) $(PAYLOAD_TARGET):normal/payload
@ for file in `ls $(ROM_DIR)`; do \
$(STAGING_DIR)/bin/lar -a $(TARGET_ROM_FILE) $(ROM_DIR)/$$file:$$file; \
@@ -96,14 +96,14 @@
MKTARGETS:= $(shell ls $(PACKAGE_DIR)/*/*.mk)
-include $(filter-out $(PACKAGE_DIR)/kernel/% $(PACKAGE_DIR)/linuxbios/% $(PACKAGE_DIR)/linuxbiosv3/%,$(MKTARGETS))
+include $(filter-out $(PACKAGE_DIR)/kernel/% $(PACKAGE_DIR)/coreboot-v2/% $(PACKAGE_DIR)/coreboot-v3/%,$(MKTARGETS))
include $(KERNEL_MK)
-ifeq ($(CONFIG_LINUXBIOS_V2),y)
-include $(LBV2_MK)
+ifeq ($(CONFIG_COREBOOT_V2),y)
+include $(CBV2_MK)
else
-include $(PACKAGE_DIR)/linuxbiosv3/linuxbiosv3.mk
+include $(PACKAGE_DIR)/coreboot-v3/coreboot-v3.mk
endif
endif
Modified: buildrom-devel/README
===================================================================
--- buildrom-devel/README 2008-01-11 22:53:36 UTC (rev 95)
+++ buildrom-devel/README 2008-01-18 16:57:20 UTC (rev 96)
@@ -6,10 +6,10 @@
Introduction
This is a simple makefile system that designed to build a ROM image for
-LinuxBIOS based systems. This system allows one to choose one of several
-different payloads for a variety of platforms. The intention of buildROM
-is to build everything together with one step, rather then the 6 or 8
-individual steps that it would have taken previously.
+coreboot (formally LinuxBIOS) based systems. This system allows one to
+choose one of several different payloads for a variety of platforms.
+The intention of buildROM is to build everything together with one step,
+rather then the 6 or 8 individual steps that it would have taken previously.
Payloads
@@ -30,11 +30,11 @@
CONFIG_VERBOSE - show build output on stdout instead of a log file
CONFIG_ADVANCED - select some advanced options:
- CONFIG_USE_LZMA - Compress payloads with LZMA (requires LB support)
- CONFIG_LB_USE_BUILD - Say 'y' here to specify an existing build
- directory for LinuxBIOS. This is useful if you
+ CONFIG_USE_LZMA - Compress payloads with LZMA (requires coreboot support)
+ CONFIG_CB_USE_BUILD - Say 'y' here to specify an existing build
+ directory for coreboot. This is useful if you
want build out of your development tree.
- CONFIG_LB_BUILDDIR - Specify your remote LinuxBIOS build directory here
+ CONFIG_CB_BUILDDIR - Specify your remote coreboot build directory here
Some of the payload options have their own configuration:
Modified: buildrom-devel/config/platforms/Config.in
===================================================================
--- buildrom-devel/config/platforms/Config.in 2008-01-11 22:53:36 UTC (rev 95)
+++ buildrom-devel/config/platforms/Config.in 2008-01-18 16:57:20 UTC (rev 96)
@@ -17,7 +17,7 @@
config VENDOR_GIGABYTE
bool "GIGABYTE"
- depends LINUXBIOS_V2
+ depends COREBOOT_V2
config VENDOR_PC_ENGINES
bool "PC Engines"
@@ -27,11 +27,11 @@
config VENDOR_SUPERMICRO
bool "Supermicro"
- depends LINUXBIOS_V2
+ depends COREBOOT_V2
config VENDOR_TYAN
bool "Tyan"
- depends LINUXBIOS_V2
+ depends COREBOOT_V2
endchoice
@@ -64,34 +64,34 @@
config PLATFORM_DB800
bool "AMD DB800"
depends VENDOR_AMD
- depends LINUXBIOS_V2
+ depends COREBOOT_V2
select PLATFORM
config PLATFORM_GA_M57SLI_S4
bool "GIGABYTE GA-M57SLI-S4"
depends VENDOR_GIGABYTE
- depends LINUXBIOS_V2
+ depends COREBOOT_V2
select PLATFORM
select PLATFORM_SUPPORT_64BIT
config PLATFORM_GA_2761GXDK
bool "GIGABYTE GA-2761GXDK"
depends VENDOR_GIGABYTE
- depends LINUXBIOS_V2
+ depends COREBOOT_V2
select PLATFORM
select PLATFORM_SUPPORT_64BIT
config PLATFORM_TYAN_S2882
bool "Tyan S2882"
depends VENDOR_TYAN
- depends LINUXBIOS_V2
+ depends COREBOOT_V2
select PLATFORM
select PLATFORM_SUPPORT_64BIT
config PLATFORM_TYAN_S2891
bool "Tyan S2891"
depends VENDOR_TYAN
- depends LINUXBIOS_V2
+ depends COREBOOT_V2
select PLATFORM
select PLATFORM_SUPPORT_64BIT
@@ -103,21 +103,21 @@
config PLATFORM_SERENGETI_CHEETAH
bool "AMD Serengeti-Cheetah"
depends VENDOR_AMD
- depends LINUXBIOS_V2
+ depends COREBOOT_V2
select PLATFORM
select PLATFORM_SUPPORT_64BIT
config PLATFORM_SUPERMICRO_H8DMR
bool "Supermicro H8DMR"
depends VENDOR_SUPERMICRO
- depends LINUXBIOS_V2
+ depends COREBOOT_V2
select PLATFORM
select PLATFORM_SUPPORT_64BIT
config PLATFORM_CHEETAH_FAM10
bool "AMD Serengeti-Cheetah with fam10 processor"
depends VENDOR_AMD
- depends LINUXBIOS_V2
+ depends COREBOOT_V2
select PLATFORM
select PLATFORM_SUPPORT_64BIT
endchoice
Modified: buildrom-devel/config/platforms/alix1c.conf
===================================================================
--- buildrom-devel/config/platforms/alix1c.conf 2008-01-11 22:53:36 UTC (rev 95)
+++ buildrom-devel/config/platforms/alix1c.conf 2008-01-18 16:57:20 UTC (rev 96)
@@ -12,7 +12,7 @@
# Targets
KERNEL_MK=$(PACKAGE_DIR)/kernel/alix1c-kernel.mk
-LBV2_MK=$(PACKAGE_DIR)/linuxbios/alix1c-linuxbios.mk
+CBV2_MK=$(PACKAGE_DIR)/coreboot-v2/alix1c.mk
# kernel configuration (for LAB)
@@ -23,14 +23,14 @@
# Etherboot configuration
ETHERBOOT_ARCH=i386
-# LinuxBIOS configuration
+# coreboot configuration
-LINUXBIOS_VENDOR=pcengines
-LINUXBIOS_BOARD=alix1c
-LBV2_CONFIG=Config.lb
-LBV2_TDIR=alix1c
-LBV2_TAG=3047
-LINUXBIOS_ROM_NAME=linuxbios.rom
+COREBOOT_VENDOR=pcengines
+COREBOOT_BOARD=alix1c
+CBV2_CONFIG=Config.lb
+CBV2_TDIR=alix1c
+CBV2_TAG=3047
+COREBOOT_ROM_NAME=linuxbios.rom
# FILO configuration
Modified: buildrom-devel/config/platforms/db800.conf
===================================================================
--- buildrom-devel/config/platforms/db800.conf 2008-01-11 22:53:36 UTC (rev 95)
+++ buildrom-devel/config/platforms/db800.conf 2008-01-18 16:57:20 UTC (rev 96)
@@ -14,7 +14,7 @@
# Use the same settings as the Norwich platform
KERNEL_MK=$(PACKAGE_DIR)/kernel/norwich-kernel.mk
-LBV2_MK=$(PACKAGE_DIR)/linuxbios/norwich-linuxbios.mk
+CBV2_MK=$(PACKAGE_DIR)/coreboot-v2/norwich.mk
# kernel configuration (for LAB)
# Use the same settings as the Norwich platform
@@ -26,14 +26,14 @@
# Etherboot configuration
ETHERBOOT_ARCH=i386
-# LinuxBIOS configuration
+# coreboot configuration
-LINUXBIOS_VENDOR=amd
-LINUXBIOS_BOARD=db800
-LBV2_CONFIG=Config.lb
-LBV2_TDIR=db800
-LBV2_TAG=2810
-LINUXBIOS_ROM_NAME=db800.rom
+COREBOOT_VENDOR=amd
+COREBOOT_BOARD=db800
+CBV2_CONFIG=Config.lb
+CBV2_TDIR=db800
+CBV2_TAG=2810
+COREBOOT_ROM_NAME=db800.rom
# FILO configuration
# Use a new FILO config for the DB800 to autoload an image
Modified: buildrom-devel/config/platforms/dbe61.conf
===================================================================
--- buildrom-devel/config/platforms/dbe61.conf 2008-01-11 22:53:36 UTC (rev 95)
+++ buildrom-devel/config/platforms/dbe61.conf 2008-01-18 16:57:20 UTC (rev 96)
@@ -14,7 +14,7 @@
# Targets
KERNEL_MK=$(PACKAGE_DIR)/kernel/norwich-kernel.mk
-LBV2_MK=$(PACKAGE_DIR)/linuxbios/norwich-linuxbios.mk
+CBV2_MK=$(PACKAGE_DIR)/coreboot-v2/norwich.mk
# kernel configuration (for LAB)
@@ -25,14 +25,14 @@
# Etherboot configuration
ETHERBOOT_ARCH=i386
-# LinuxBIOS configuration
+# coreboot configuration
-LINUXBIOS_VENDOR=artecgroup
-LINUXBIOS_BOARD=dbe61
-LBV2_CONFIG=Config.lb
-LBV2_TDIR=dbe61
-LBV2_TAG=2728
-LINUXBIOS_ROM_NAME=dbe61.rom
+COREBOOT_VENDOR=artecgroup
+COREBOOT_BOARD=dbe61
+CBV2_CONFIG=Config.lb
+CBV2_TDIR=dbe61
+CBV2_TAG=2728
+COREBOOT_ROM_NAME=dbe61.rom
# FILO configuration
Modified: buildrom-devel/config/platforms/ga-2761gxdk.conf
===================================================================
--- buildrom-devel/config/platforms/ga-2761gxdk.conf 2008-01-11 22:53:36 UTC (rev 95)
+++ buildrom-devel/config/platforms/ga-2761gxdk.conf 2008-01-18 16:57:20 UTC (rev 96)
@@ -18,7 +18,7 @@
# Disable for now - I don't know the right kernel for this platform
#KERNEL_MK=$(PACKAGE_DIR)/kernel/
-LBV2_MK=$(PACKAGE_DIR)/linuxbios/ga-2761gxdk-linuxbios.mk
+CBV2_MK=$(PACKAGE_DIR)/coreboot-v2/ga-2761gxdk.mk
# kernel configuration (for LAB)
@@ -30,14 +30,14 @@
# Etherboot configuration
ETHERBOOT_ARCH=i386
-# LinuxBIOS configuration
+# coreboot configuration
-LINUXBIOS_VENDOR=gigabyte
-LINUXBIOS_BOARD=ga_2761gxdk
-LBV2_CONFIG=Config.lb
-LBV2_TDIR=ga_2761gxdk
-LBV2_TAG=2908
-LINUXBIOS_ROM_NAME=linuxbios.rom
+COREBOOT_VENDOR=gigabyte
+COREBOOT_BOARD=ga_2761gxdk
+CBV2_CONFIG=Config.lb
+CBV2_TDIR=ga_2761gxdk
+CBV2_TAG=2908
+COREBOOT_ROM_NAME=linuxbios.rom
# FILO configuration
Modified: buildrom-devel/config/platforms/m57sli.conf
===================================================================
--- buildrom-devel/config/platforms/m57sli.conf 2008-01-11 22:53:36 UTC (rev 95)
+++ buildrom-devel/config/platforms/m57sli.conf 2008-01-18 16:57:20 UTC (rev 96)
@@ -17,7 +17,7 @@
# Targets
KERNEL_MK=$(PACKAGE_DIR)/kernel/m57sli-kernel.mk
-LBV2_MK=$(PACKAGE_DIR)/linuxbios/m57sli-linuxbios.mk
+CBV2_MK=$(PACKAGE_DIR)/coreboot-v2/m57sli.mk
# kernel configuration (for LAB)
@@ -34,14 +34,14 @@
# Etherboot configuration
ETHERBOOT_ARCH=i386
-# LinuxBIOS configuration
+# coreboot configuration
-LINUXBIOS_VENDOR=gigabyte
-LINUXBIOS_BOARD=m57sli
-LBV2_CONFIG=Config.lb
-LBV2_TDIR=m57sli
-LBV2_TAG=2958
-LINUXBIOS_ROM_NAME=linuxbios.rom
+COREBOOT_VENDOR=gigabyte
+COREBOOT_BOARD=m57sli
+CBV2_CONFIG=Config.lb
+CBV2_TDIR=m57sli
+CBV2_TAG=2958
+COREBOOT_ROM_NAME=linuxbios.rom
# FILO configuration
Modified: buildrom-devel/config/platforms/msm800sev.conf
===================================================================
--- buildrom-devel/config/platforms/msm800sev.conf 2008-01-11 22:53:36 UTC (rev 95)
+++ buildrom-devel/config/platforms/msm800sev.conf 2008-01-18 16:57:20 UTC (rev 96)
@@ -13,7 +13,7 @@
# Targets
KERNEL_MK=$(PACKAGE_DIR)/kernel/msm800sev-kernel.mk
-LBV2_MK=$(PACKAGE_DIR)/linuxbios/msm800sev-linuxbios.mk
+CBV2_MK=$(PACKAGE_DIR)/coreboot-v2/msm800sev.mk
# kernel configuration (for LAB)
@@ -24,14 +24,14 @@
# Etherboot configuration
ETHERBOOT_ARCH=i386
-# LinuxBIOS configuration
+# coreboot configuration
-LINUXBIOS_VENDOR=digitallogic
-LINUXBIOS_BOARD=msm800sev
-LBV2_CONFIG=Config.lb
-LBV2_TDIR=msm800sev
-LBV2_TAG=3047
-LINUXBIOS_ROM_NAME=linuxbios.rom
+COREBOOT_VENDOR=digitallogic
+COREBOOT_BOARD=msm800sev
+CBV2_CONFIG=Config.lb
+CBV2_TDIR=msm800sev
+CBV2_TAG=3047
+COREBOOT_ROM_NAME=linuxbios.rom
# FILO configuration
Modified: buildrom-devel/config/platforms/norwich.conf
===================================================================
--- buildrom-devel/config/platforms/norwich.conf 2008-01-11 22:53:36 UTC (rev 95)
+++ buildrom-devel/config/platforms/norwich.conf 2008-01-18 16:57:20 UTC (rev 96)
@@ -13,7 +13,7 @@
# Targets
KERNEL_MK=$(PACKAGE_DIR)/kernel/norwich-kernel.mk
-LBV2_MK=$(PACKAGE_DIR)/linuxbios/norwich-linuxbios.mk
+CBV2_MK=$(PACKAGE_DIR)/coreboot-v2/norwich.mk
# kernel configuration (for LAB)
@@ -24,14 +24,14 @@
# Etherboot configuration
ETHERBOOT_ARCH=i386
-# LinuxBIOS configuration
+# coreboot configuration
-LINUXBIOS_VENDOR=amd
-LINUXBIOS_BOARD=norwich
-LBV2_CONFIG=Config.lb
-LBV2_TDIR=norwich
-LBV2_TAG=2810
-LINUXBIOS_ROM_NAME=norwich.rom
+COREBOOT_VENDOR=amd
+COREBOOT_BOARD=norwich
+CBV2_CONFIG=Config.lb
+CBV2_TDIR=norwich
+CBV2_TAG=2810
+COREBOOT_ROM_NAME=norwich.rom
# FILO configuration
Modified: buildrom-devel/config/platforms/platforms.conf
===================================================================
--- buildrom-devel/config/platforms/platforms.conf 2008-01-11 22:53:36 UTC (rev 95)
+++ buildrom-devel/config/platforms/platforms.conf 2008-01-18 16:57:20 UTC (rev 96)
@@ -1,7 +1,7 @@
# This will include the correct configuration for the
# selected platform
-LBV2_MK=$(PACKAGE_DIR)/linuxbios/generic-linuxbios.mk
+CBV2_MK=$(PACKAGE_DIR)/coreboot-v2/generic.mk
##Include the correct platform configuration
Modified: buildrom-devel/config/platforms/qemu.conf
===================================================================
--- buildrom-devel/config/platforms/qemu.conf 2008-01-11 22:53:36 UTC (rev 95)
+++ buildrom-devel/config/platforms/qemu.conf 2008-01-18 16:57:20 UTC (rev 96)
@@ -12,7 +12,7 @@
# Targets
KERNEL_MK=$(PACKAGE_DIR)/kernel/qemu-kernel.mk
-LBV2_MK=$(PACKAGE_DIR)/linuxbios/qemu.mk
+CBV2_MK=$(PACKAGE_DIR)/coreboot-v2/qemu.mk
# kernel configuration (for LAB)
@@ -23,19 +23,19 @@
# Etherboot configuration
ETHERBOOT_ARCH=i386
-# LinuxBIOSv2 configuration
-LBV2_TAG=2950
-LBV2_CONFIG=Config.lb
-LINUXBIOS_ROM_NAME=qemu.rom
+# coreboot-v2 configuration
+CBV2_TAG=2950
+CBV2_CONFIG=Config.lb
+COREBOOT_ROM_NAME=qemu.rom
+CBV2_TDIR=qemu-i386
-# LinuxBIOS v3 configuration
-LBV3_CONFIG=qemu-i386-defconfig
-LBV3_TAG=HEAD
-LBV3_ROM_NAME=linuxbios.rom
+# coreboot v3 configuration
+CBV3_CONFIG=qemu-i386-defconfig
+CBV3_TAG=HEAD
+CBV3_ROM_NAME=linuxbios.rom
-LINUXBIOS_VENDOR=emulation
-LINUXBIOS_BOARD=qemu-i386
-LBV2_TDIR=qemu-i386
+COREBOOT_VENDOR=emulation
+COREBOOT_BOARD=qemu-i386
# FILO configuration
Modified: buildrom-devel/config/platforms/serengeti_cheetah.conf
===================================================================
--- buildrom-devel/config/platforms/serengeti_cheetah.conf 2008-01-11 22:53:36 UTC (rev 95)
+++ buildrom-devel/config/platforms/serengeti_cheetah.conf 2008-01-18 16:57:20 UTC (rev 96)
@@ -18,7 +18,7 @@
# Targets
KERNEL_MK=$(PACKAGE_DIR)/kernel/serengeti_cheetah-kernel.mk
-LBV2_MK=$(PACKAGE_DIR)/linuxbios/serengeti_cheetah.mk
+CBV2_MK=$(PACKAGE_DIR)/coreboot-v2/serengeti_cheetah.mk
# kernel configuration (for LAB)
@@ -40,22 +40,22 @@
# Etherboot configuration
ETHERBOOT_ARCH=i386
-# LinuxBIOS configuration
+# coreboot configuration
-LINUXBIOS_VENDOR=amd
-LBV2_CONFIG=Config.lb
+COREBOOT_VENDOR=amd
+CBV2_CONFIG=Config.lb
ifeq ($(CONFIG_PLATFORM_CHEETAH_FAM10),y)
-LINUXBIOS_BOARD=serengeti_cheetah_fam10
-LBV2_TDIR=serengeti_cheetah_fam10
-LBV2_TAG=3018
-LINUXBIOS_ROM_NAME=amd-cheetah-fam10.rom
+COREBOOT_BOARD=serengeti_cheetah_fam10
+CBV2_TDIR=serengeti_cheetah_fam10
+CBV2_TAG=3018
+COREBOOT_ROM_NAME=amd-cheetah-fam10.rom
else
-LINUXBIOS_BOARD=serengeti_cheetah
-LBV2_CONFIG=Config.lb
-LBV2_TDIR=serengeti_cheetah
-LBV2_TAG=2950
-LINUXBIOS_ROM_NAME=serengeti_cheetah.rom
+COREBOOT_BOARD=serengeti_cheetah
+CBV2_CONFIG=Config.lb
+CBV2_TDIR=serengeti_cheetah
+CBV2_TAG=2950
+COREBOOT_ROM_NAME=serengeti_cheetah.rom
endif
# FILO configuration
Modified: buildrom-devel/config/platforms/supermicro-h8dmr.conf
===================================================================
--- buildrom-devel/config/platforms/supermicro-h8dmr.conf 2008-01-11 22:53:36 UTC (rev 95)
+++ buildrom-devel/config/platforms/supermicro-h8dmr.conf 2008-01-18 16:57:20 UTC (rev 96)
@@ -17,7 +17,7 @@
# Targets
KERNEL_MK=$(PACKAGE_DIR)/kernel/supermicro-h8dmr-kernel.mk
-LBV2_MK=$(PACKAGE_DIR)/linuxbios/supermicro-h8dmr-linuxbios.mk
+CBV2_MK=$(PACKAGE_DIR)/coreboot-v2/supermicro-h8dmr.mk
# kernel configuration (for LAB)
@@ -34,14 +34,14 @@
# Etherboot configuration
ETHERBOOT_ARCH=i386
-# LinuxBIOS configuration
+# coreboot configuration
-LINUXBIOS_VENDOR=supermicro
-LINUXBIOS_BOARD=h8dmr
-LBV2_CONFIG=Config.lb
-LBV2_TDIR=h8dmr
-LBV2_TAG=2996
-LINUXBIOS_ROM_NAME=linuxbios.rom
+COREBOOT_VENDOR=supermicro
+COREBOOT_BOARD=h8dmr
+CBV2_CONFIG=Config.lb
+CBV2_TDIR=h8dmr
+CBV2_TAG=2996
+COREBOOT_ROM_NAME=linuxbios.rom
# FILO configuration
Modified: buildrom-devel/config/platforms/tyan-s2882.conf
===================================================================
--- buildrom-devel/config/platforms/tyan-s2882.conf 2008-01-11 22:53:36 UTC (rev 95)
+++ buildrom-devel/config/platforms/tyan-s2882.conf 2008-01-18 16:57:20 UTC (rev 96)
@@ -17,7 +17,7 @@
# Targets
KERNEL_MK=$(PACKAGE_DIR)/kernel/tyan-s2882-kernel.mk
-LBV2_MK=$(PACKAGE_DIR)/linuxbios/tyan-s2882-linuxbios.mk
+CBV2_MK=$(PACKAGE_DIR)/coreboot-v2/tyan-s2882.mk
# kernel configuration (for LAB)
@@ -34,14 +34,14 @@
# Etherboot configuration
ETHERBOOT_ARCH=i386
-# LinuxBIOS configuration
+# coreboot configuration
-LINUXBIOS_VENDOR=tyan
-LINUXBIOS_BOARD=s2882
-LBV2_CONFIG=Config.lb
-LBV2_TDIR=s2882
-LBV2_TAG=2887
-LINUXBIOS_ROM_NAME=linuxbios.rom
+COREBOOT_VENDOR=tyan
+COREBOOT_BOARD=s2882
+CBV2_CONFIG=Config.lb
+CBV2_TDIR=s2882
+CBV2_TAG=2887
+COREBOOT_ROM_NAME=linuxbios.rom
# FILO configuration
Modified: buildrom-devel/config/platforms/tyan-s2891.conf
===================================================================
--- buildrom-devel/config/platforms/tyan-s2891.conf 2008-01-11 22:53:36 UTC (rev 95)
+++ buildrom-devel/config/platforms/tyan-s2891.conf 2008-01-18 16:57:20 UTC (rev 96)
@@ -17,7 +17,7 @@
# Targets
KERNEL_MK=$(PACKAGE_DIR)/kernel/tyan-s2891-kernel.mk
-LBV2_MK=$(PACKAGE_DIR)/linuxbios/tyan-s2891-linuxbios.mk
+CBV2_MK=$(PACKAGE_DIR)/coreboot-v2/tyan-s2891.mk
# kernel configuration (for LAB)
@@ -34,14 +34,14 @@
# Etherboot configuration
ETHERBOOT_ARCH=i386
-# LinuxBIOS configuration
+# coreboot configuration
-LINUXBIOS_VENDOR=tyan
-LINUXBIOS_BOARD=s2891
-LBV2_CONFIG=Config.lb
-LBV2_TDIR=s2891
-LBV2_TAG=2792
-LINUXBIOS_ROM_NAME=linuxbios.rom
+COREBOOT_VENDOR=tyan
+COREBOOT_BOARD=s2891
+CBV2_CONFIG=Config.lb
+CBV2_TDIR=s2891
+CBV2_TAG=2792
+COREBOOT_ROM_NAME=linuxbios.rom
# FILO configuration
Modified: buildrom-devel/packages/linuxbios/alix1c-linuxbios.mk
===================================================================
--- buildrom-devel/packages/linuxbios/alix1c-linuxbios.mk 2008-01-11 22:53:36 UTC (rev 95)
+++ buildrom-devel/packages/linuxbios/alix1c-linuxbios.mk 2008-01-18 16:57:20 UTC (rev 96)
@@ -1,38 +1,38 @@
-# This is the Generic LinuxBIOS target
+# This is the Generic coreboot target
ifeq ($(CONFIG_PLATFORM),y)
-ifeq ($(LBV2_TAG),)
+ifeq ($(CBV2_TAG),)
$(error You need to specify a version to pull in your platform config)
endif
endif
-LBV2_BASE_DIR=svn
-LBV2_URL=svn://openbios.org/repos/trunk/LinuxBIOSv2
-LBV2_TARBALL=linuxbios-svn-$(LBV2_TAG).tar.gz
-LBV2_PAYLOAD_TARGET=$(LBV2_BUILD_DIR)/payload.elf
+CBV2_BASE_DIR=svn
+CBV2_URL=svn://coreboot.org/repos/trunk/coreboot-v2
+CBV2_TARBALL=coreboot-svn-$(CBV2_TAG).tar.gz
+CBV2_PAYLOAD_TARGET=$(CBV2_BUILD_DIR)/payload.elf
VSA_URL=http://www.amd.com/files/connectivitysolutions/geode/geode_lx/
-LBV2_VSA=lx_vsa.36k.bin
-TARGET_ROM = $(LINUXBIOS_VENDOR)-$(LINUXBIOS_BOARD).rom
+CBV2_VSA=lx_vsa.36k.bin
+TARGET_ROM = $(COREBOOT_VENDOR)-$(COREBOOT_BOARD).rom
-include $(PACKAGE_DIR)/linuxbios/linuxbios.inc
+include $(PACKAGE_DIR)/coreboot-v2/coreboot.inc
-$(SOURCE_DIR)/$(LBV2_VSA):
+$(SOURCE_DIR)/$(CBV2_VSA):
@ echo "Fetching the VSA code..."
- wget -P $(SOURCE_DIR) $(VSA_URL)/$(LBV2_VSA).gz -O $@
+ wget -P $(SOURCE_DIR) $(VSA_URL)/$(CBV2_VSA).gz -O $@
-$(SOURCE_DIR)/$(LBV2_TARBALL):
- @ echo "Fetching the LinuxBIOS code..."
- @ mkdir -p $(SOURCE_DIR)/linuxbios
- @ $(BIN_DIR)/fetchsvn.sh $(LBV2_URL) $(SOURCE_DIR)/linuxbios \
- $(LBV2_TAG) $(SOURCE_DIR)/$(LBV2_TARBALL) \
- > $(LBV2_FETCH_LOG) 2>&1
+$(SOURCE_DIR)/$(CBV2_TARBALL):
+ @ echo "Fetching the coreboot code..."
+ @ mkdir -p $(SOURCE_DIR)/coreboot
+ @ $(BIN_DIR)/fetchsvn.sh $(CBV2_URL) $(SOURCE_DIR)/coreboot \
+ $(CBV2_TAG) $(SOURCE_DIR)/$(CBV2_TARBALL) \
+ > $(CBV2_FETCH_LOG) 2>&1
# Special rule - append the VSA
-$(OUTPUT_DIR)/$(TARGET_ROM): $(LBV2_OUTPUT) $(SOURCE_DIR)/$(LBV2_VSA)
+$(OUTPUT_DIR)/$(TARGET_ROM): $(CBV2_OUTPUT) $(SOURCE_DIR)/$(CBV2_VSA)
@ mkdir -p $(OUTPUT_DIR)
- @ cat $(SOURCE_DIR)/$(LBV2_VSA) $(LBV2_OUTPUT) > $@
+ @ cat $(SOURCE_DIR)/$(CBV2_VSA) $(CBV2_OUTPUT) > $@
-linuxbios: $(OUTPUT_DIR)/$(TARGET_ROM)
-linuxbios-clean: generic-linuxbios-clean
-linuxbios-distclean: generic-linuxbios-distclean
+coreboot: $(OUTPUT_DIR)/$(TARGET_ROM)
+coreboot-clean: generic-coreboot-clean
+coreboot-distclean: generic-coreboot-distclean
Modified: buildrom-devel/packages/linuxbios/ga-2761gxdk-linuxbios.mk
===================================================================
--- buildrom-devel/packages/linuxbios/ga-2761gxdk-linuxbios.mk 2008-01-11 22:53:36 UTC (rev 95)
+++ buildrom-devel/packages/linuxbios/ga-2761gxdk-linuxbios.mk 2008-01-18 16:57:20 UTC (rev 96)
@@ -1,38 +1,38 @@
-# This is the Generic LinuxBIOS target
+# This is the Generic coreboot target
ifeq ($(CONFIG_PLATFORM),y)
-ifeq ($(LBV2_TAG),)
+ifeq ($(CBV2_TAG),)
$(error You need to specify a version to pull in your platform config)
endif
endif
-LBV2_PATCHES=$(PACKAGE_DIR)/linuxbios/patches/2761gxdk-fix-target.patch
+CBV2_PATCHES=$(PACKAGE_DIR)/coreboot-v2/patches/2761gxdk-fix-target.patch
-LBV2_BASE_DIR=svn
-LBV2_URL=svn://linuxbios.org/repos/trunk/LinuxBIOSv2
-LBV2_TARBALL=linuxbios-svn-$(LBV2_TAG).tar.gz
-LBV2_PAYLOAD_TARGET=$(LBV2_BUILD_DIR)/payload.elf
-TARGET_ROM = $(LINUXBIOS_VENDOR)-$(LINUXBIOS_BOARD).rom
+CBV2_BASE_DIR=svn
+CBV2_URL=svn://coreboot.org/repos/trunk/coreboot-v2
+CBV2_TARBALL=coreboot-svn-$(CBV2_TAG).tar.gz
+CBV2_PAYLOAD_TARGET=$(CBV2_BUILD_DIR)/payload.elf
+TARGET_ROM = $(COREBOOT_VENDOR)-$(COREBOOT_BOARD).rom
-include $(PACKAGE_DIR)/linuxbios/linuxbios.inc
+include $(PACKAGE_DIR)/coreboot-v2/coreboot.inc
# This matches the base name of the ROM on
-# http://www.linuxbios.org/data/optionroms/
+# http://www.coreboot.org/data/optionroms/
OPTIONROM_ID = pci1039,6330
-include $(PACKAGE_DIR)/linuxbios/optionroms.inc
+include $(PACKAGE_DIR)/coreboot-v2/optionroms.inc
-$(SOURCE_DIR)/$(LBV2_TARBALL):
- @ echo "Fetching the LinuxBIOS code..."
- @ mkdir -p $(SOURCE_DIR)/linuxbios
- @ $(BIN_DIR)/fetchsvn.sh $(LBV2_URL) $(SOURCE_DIR)/linuxbios \
- $(LBV2_TAG) $(SOURCE_DIR)/$(LBV2_TARBALL) \
- > $(LBV2_FETCH_LOG) 2>&1
+$(SOURCE_DIR)/$(CBV2_TARBALL):
+ @ echo "Fetching the coreboot code..."
+ @ mkdir -p $(SOURCE_DIR)/coreboot
+ @ $(BIN_DIR)/fetchsvn.sh $(CBV2_URL) $(SOURCE_DIR)/coreboot \
+ $(CBV2_TAG) $(SOURCE_DIR)/$(CBV2_TARBALL) \
+ > $(CBV2_FETCH_LOG) 2>&1
-$(OUTPUT_DIR)/$(TARGET_ROM): $(LBV2_OUTPUT) $(SOURCE_DIR)/$(OPTIONROM_ID).rom
+$(OUTPUT_DIR)/$(TARGET_ROM): $(CBV2_OUTPUT) $(SOURCE_DIR)/$(OPTIONROM_ID).rom
@ mkdir -p $(OUTPUT_DIR)
- @ cat $(SOURCE_DIR)/$(OPTIONROM_ID).rom $(LBV2_OUTPUT) > $@
+ @ cat $(SOURCE_DIR)/$(OPTIONROM_ID).rom $(CBV2_OUTPUT) > $@
-linuxbios: $(OUTPUT_DIR)/$(TARGET_ROM)
-linuxbios-clean: generic-linuxbios-clean
-linuxbios-distclean: generic-linuxbios-distclean
+coreboot: $(OUTPUT_DIR)/$(TARGET_ROM)
+coreboot-clean: generic-coreboot-clean
+coreboot-distclean: generic-coreboot-distclean
Modified: buildrom-devel/packages/linuxbios/generic-linuxbios.mk
===================================================================
--- buildrom-devel/packages/linuxbios/generic-linuxbios.mk 2008-01-11 22:53:36 UTC (rev 95)
+++ buildrom-devel/packages/linuxbios/generic-linuxbios.mk 2008-01-18 16:57:20 UTC (rev 96)
@@ -1,42 +1,42 @@
-# This is the Generic LinuxBIOS target
+# This is the Generic coreboot target
ifeq ($(CONFIG_PLATFORM),y)
-ifeq ($(LBV2_TAG),)
+ifeq ($(CBV2_TAG),)
$(error You need to specify a version to pull in your platform config)
endif
endif
-LBV2_BASE_DIR=svn
-LBV2_URL=svn://linuxbios.org/repos/trunk/LinuxBIOSv2
-LBV2_TARBALL=linuxbios-svn-$(LBV2_TAG).tar.gz
-LBV2_PAYLOAD_TARGET=$(LBV2_BUILD_DIR)/payload.elf
-TARGET_ROM = $(LINUXBIOS_VENDOR)-$(LINUXBIOS_BOARD).rom
+CBV2_BASE_DIR=svn
+CBV2_URL=svn://coreboot.org/repos/trunk/coreboot-v2
+CBV2_TARBALL=coreboot-svn-$(CBV2_TAG).tar.gz
+CBV2_PAYLOAD_TARGET=$(CBV2_BUILD_DIR)/payload.elf
+TARGET_ROM = $(COREBOOT_VENDOR)-$(COREBOOT_BOARD).rom
# This is the list of components that comprise the ROM (excluding the payload)
-LBV2_COMPONENTS = $(LBV2_OUTPUT)
+CBV2_COMPONENTS = $(CBV2_OUTPUT)
-include $(PACKAGE_DIR)/linuxbios/linuxbios.inc
+include $(PACKAGE_DIR)/coreboot-v2/coreboot.inc
# If an optionrom was specified in the configuration, then use it
ifneq ($(OPTIONROM_ID),)
-include $(PACKAGE_DIR)/linuxbios/optionroms.inc
+include $(PACKAGE_DIR)/coreboot-v2/optionroms.inc
-# Add it to the front of the list so it is prepended to the LinuxBIOS output
-LBV2_COMPONENTS = $(SOURCE_DIR)/$(OPTIONROM_ID).rom $(LBV2_COMPONENTS)
+# Add it to the front of the list so it is prepended to the coreboot output
+CBV2_COMPONENTS = $(SOURCE_DIR)/$(OPTIONROM_ID).rom $(CBV2_COMPONENTS)
endif
-$(SOURCE_DIR)/$(LBV2_TARBALL):
- @ echo "Fetching the LinuxBIOS code..."
- @ mkdir -p $(SOURCE_DIR)/linuxbios
- @ $(BIN_DIR)/fetchsvn.sh $(LBV2_URL) $(SOURCE_DIR)/linuxbios \
- $(LBV2_TAG) $(SOURCE_DIR)/$(LBV2_TARBALL) \
- > $(LBV2_FETCH_LOG) 2>&1
+$(SOURCE_DIR)/$(CBV2_TARBALL):
+ @ echo "Fetching the coreboot code..."
+ @ mkdir -p $(SOURCE_DIR)/coreboot
+ @ $(BIN_DIR)/fetchsvn.sh $(CBV2_URL) $(SOURCE_DIR)/coreboot \
+ $(CBV2_TAG) $(SOURCE_DIR)/$(CBV2_TARBALL) \
+ > $(CBV2_FETCH_LOG) 2>&1
-$(OUTPUT_DIR)/$(TARGET_ROM): $(LBV2_COMPONENTS)
+$(OUTPUT_DIR)/$(TARGET_ROM): $(CBV2_COMPONENTS)
@ mkdir -p $(OUTPUT_DIR)
- @ cat $(LBV2_COMPONENTS) > $@
+ @ cat $(CBV2_COMPONENTS) > $@
-linuxbios: $(OUTPUT_DIR)/$(TARGET_ROM)
-linuxbios-clean: generic-linuxbios-clean
-linuxbios-distclean: generic-linuxbios-distclean
+coreboot: $(OUTPUT_DIR)/$(TARGET_ROM)
+coreboot-clean: generic-coreboot-clean
+coreboot-distclean: generic-coreboot-distclean
Modified: buildrom-devel/packages/linuxbios/linuxbios.inc
===================================================================
--- buildrom-devel/packages/linuxbios/linuxbios.inc 2008-01-11 22:53:36 UTC (rev 95)
+++ buildrom-devel/packages/linuxbios/linuxbios.inc 2008-01-18 16:57:20 UTC (rev 96)
@@ -1,100 +1,100 @@
# This is the common code included by all the targets
ifeq ($(CONFIG_PLATFORM),y)
-ifeq ($(LINUXBIOS_VENDOR),)
-$(error No LinuxBIOS vendor specified)
+ifeq ($(COREBOOT_VENDOR),)
+$(error No coreboot vendor specified)
endif
-ifeq ($(LINUXBIOS_BOARD),)
-$(error No LinuxBIOS board specified)
+ifeq ($(COREBOOT_BOARD),)
+$(error No coreboot board specified)
endif
-ifeq ($(LBV2_CONFIG),)
-$(error No LinuxBIOS config specified)
+ifeq ($(CBV2_CONFIG),)
+$(error No coreboot config specified)
endif
-ifeq ($(LBV2_TDIR),)
-$(error No LinuxBIOS TDIR specified)
+ifeq ($(CBV2_TDIR),)
+$(error No coreboot TDIR specified)
endif
endif
-LBV2_OUTPUT=$(LBV2_BUILD_DIR)/$(LINUXBIOS_ROM_NAME)
-LBV2_DIR=$(BUILD_DIR)/linuxbios
+CBV2_OUTPUT=$(CBV2_BUILD_DIR)/$(COREBOOT_ROM_NAME)
+CBV2_DIR=$(BUILD_DIR)/coreboot
# If the user wanted to override the build directory - obey that now
-ifeq ($(CONFIG_LB_USE_BUILD),y)
-LBV2_SRC_DIR=$(subst ",,$(CONFIG_LB_BUILDDIR))
+ifeq ($(CONFIG_CB_USE_BUILD),y)
+CBV2_SRC_DIR=$(subst ",,$(CONFIG_CB_BUILDDIR))
else
-LBV2_SRC_DIR=$(LBV2_DIR)/$(LBV2_BASE_DIR)
+CBV2_SRC_DIR=$(CBV2_DIR)/$(CBV2_BASE_DIR)
endif
-LBV2_TARGET_DIR=$(LBV2_SRC_DIR)/targets/
-LBV2_TARGET_NAME=$(LINUXBIOS_VENDOR)/$(LINUXBIOS_BOARD)
-LBV2_CONFIG_NAME=$(LBV2_TARGET_NAME)/$(LBV2_CONFIG)
+CBV2_TARGET_DIR=$(CBV2_SRC_DIR)/targets/
+CBV2_TARGET_NAME=$(COREBOOT_VENDOR)/$(COREBOOT_BOARD)
+CBV2_CONFIG_NAME=$(CBV2_TARGET_NAME)/$(CBV2_CONFIG)
-LBV2_BUILD_DIR=$(LBV2_TARGET_DIR)/$(LBV2_TARGET_NAME)/$(LBV2_TDIR)
+CBV2_BUILD_DIR=$(CBV2_TARGET_DIR)/$(CBV2_TARGET_NAME)/$(CBV2_TDIR)
-LBV2_STAMP_DIR=$(LBV2_DIR)/stamps
-LBV2_LOG_DIR=$(LBV2_DIR)/logs
+CBV2_STAMP_DIR=$(CBV2_DIR)/stamps
+CBV2_LOG_DIR=$(CBV2_DIR)/logs
ifeq ($(CONFIG_VERBOSE),y)
-LBV2_FETCH_LOG=/dev/stdout
-LBV2_CONFIG_LOG=/dev/stdout
-LBV2_BUILD_LOG=/dev/stdout
-LBV2_INSTALL_LOG=/dev/stdout
+CBV2_FETCH_LOG=/dev/stdout
+CBV2_CONFIG_LOG=/dev/stdout
+CBV2_BUILD_LOG=/dev/stdout
+CBV2_INSTALL_LOG=/dev/stdout
else
-LBV2_FETCH_LOG=$(LBV2_LOG_DIR)/fetch.log
-LBV2_BUILD_LOG=$(LBV2_LOG_DIR)/build.log
-LBV2_CONFIG_LOG=$(LBV2_LOG_DIR)/config.log
-LBV2_INSTALL_LOG=$(LBV2_LOG_DIR)/install.log
+CBV2_FETCH_LOG=$(CBV2_LOG_DIR)/fetch.log
+CBV2_BUILD_LOG=$(CBV2_LOG_DIR)/build.log
+CBV2_CONFIG_LOG=$(CBV2_LOG_DIR)/config.log
+CBV2_INSTALL_LOG=$(CBV2_LOG_DIR)/install.log
endif
# This allows us to skip the unpack/patch/configure stage
-ifeq ($(CONFIG_LB_USE_BUILD),y)
-LBV2_DIR_TARGET=
+ifeq ($(CONFIG_CB_USE_BUILD),y)
+CBV2_DIR_TARGET=
else
-LBV2_DIR_TARGET=$(LBV2_STAMP_DIR)/.configured
+CBV2_DIR_TARGET=$(CBV2_STAMP_DIR)/.configured
endif
-$(LBV2_PAYLOAD_TARGET): $(PAYLOAD_TARGET)
+$(CBV2_PAYLOAD_TARGET): $(PAYLOAD_TARGET)
@ cp $< $@
-$(LBV2_STAMP_DIR)/.unpacked: $(SOURCE_DIR)/$(LBV2_TARBALL)
- @ echo "Unpacking LinuxBIOS..."
- @ tar -C $(LBV2_DIR) -zxf $(SOURCE_DIR)/$(LBV2_TARBALL)
+$(CBV2_STAMP_DIR)/.unpacked: $(SOURCE_DIR)/$(CBV2_TARBALL)
+ @ echo "Unpacking coreboot..."
+ @ tar -C $(CBV2_DIR) -zxf $(SOURCE_DIR)/$(CBV2_TARBALL)
@ touch $@
-$(LBV2_STAMP_DIR)/.patched: $(LBV2_STAMP_DIR)/.unpacked
- @ echo "Patching LinuxBIOS..."
- @ $(BIN_DIR)/doquilt.sh $(LBV2_SRC_DIR) $(LBV2_PATCHES)
+$(CBV2_STAMP_DIR)/.patched: $(CBV2_STAMP_DIR)/.unpacked
+ @ echo "Patching coreboot..."
+ @ $(BIN_DIR)/doquilt.sh $(CBV2_SRC_DIR) $(CBV2_PATCHES)
@ touch $@
-$(LBV2_STAMP_DIR)/.configured: $(LBV2_STAMP_DIR)/.patched
+$(CBV2_STAMP_DIR)/.configured: $(CBV2_STAMP_DIR)/.patched
@ echo "Building target..."
- @( cd $(LBV2_TARGET_DIR); \
- ./buildtarget $(LBV2_CONFIG_NAME) > $(LBV2_CONFIG_LOG) 2>&1)
+ @( cd $(CBV2_TARGET_DIR); \
+ ./buildtarget $(CBV2_CONFIG_NAME) > $(CBV2_CONFIG_LOG) 2>&1)
@ touch $@
-$(LBV2_STAMP_DIR) $(LBV2_LOG_DIR):
+$(CBV2_STAMP_DIR) $(CBV2_LOG_DIR):
@ mkdir -p $@
-$(LBV2_OUTPUT): $(LBV2_STAMP_DIR) $(LBV2_LOG_DIR) $(LBV2_DIR_TARGET) $(LBV2_PAYLOAD_TARGET)
- @ echo "Building linuxbios..."
+$(CBV2_OUTPUT): $(CBV2_STAMP_DIR) $(CBV2_LOG_DIR) $(CBV2_DIR_TARGET) $(CBV2_PAYLOAD_TARGET)
+ @ echo "Building coreboot..."
@ (export CPU_OPT="$(STACKPROTECT)"; \
- make -C $(LBV2_BUILD_DIR) > $(LBV2_BUILD_LOG) 2>&1)
+ make -C $(CBV2_BUILD_DIR) > $(CBV2_BUILD_LOG) 2>&1)
-generic-linuxbios-clean:
- @ echo "Cleaning linuxbios..."
- @ rm -f $(LBV2_PAYLOAD_TARGET)
- @ if [ -d $(LBV2_BUILD_DIR) ];then \
- $(MAKE) -C $(LBV2_BUILD_DIR) clean > /dev/null 2>&1; \
+generic-coreboot-clean:
+ @ echo "Cleaning coreboot..."
+ @ rm -f $(CBV2_PAYLOAD_TARGET)
+ @ if [ -d $(CBV2_BUILD_DIR) ];then \
+ $(MAKE) -C $(CBV2_BUILD_DIR) clean > /dev/null 2>&1; \
fi
- @ rm -f $(LBV2_OUTPUT)
+ @ rm -f $(CBV2_OUTPUT)
-generic-linuxbios-distclean:
- @ if [ "$(CONFIG_LB_USE_BUILD)" = "y" ]; then \
- echo "Cleaning linuxbios build..."; \
- $(MAKE) -C $(LBV2_BUILD_DIR) clean > /dev/null 2>&1; \
- rm -f $(LBV2_OUTPUT); \
+generic-coreboot-distclean:
+ @ if [ "$(CONFIG_CB_USE_BUILD)" = "y" ]; then \
+ echo "Cleaning coreboot build..."; \
+ $(MAKE) -C $(CBV2_BUILD_DIR) clean > /dev/null 2>&1; \
+ rm -f $(CBV2_OUTPUT); \
fi
- @ rm -rf $(LBV2_DIR)/*
+ @ rm -rf $(CBV2_DIR)/*
Modified: buildrom-devel/packages/linuxbios/m57sli-linuxbios.mk
===================================================================
--- buildrom-devel/packages/linuxbios/m57sli-linuxbios.mk 2008-01-11 22:53:36 UTC (rev 95)
+++ buildrom-devel/packages/linuxbios/m57sli-linuxbios.mk 2008-01-18 16:57:20 UTC (rev 96)
@@ -1,49 +1,49 @@
-# This is the Generic LinuxBIOS target
+# This is the Generic coreboot target
ifeq ($(CONFIG_PLATFORM),y)
-ifeq ($(LBV2_TAG),)
+ifeq ($(CBV2_TAG),)
$(error You need to specify a version to pull in your platform config)
endif
endif
-LBV2_PATCHES=
+CBV2_PATCHES=
ifeq ($(CONFIG_PAYLOAD_FILO),y)
- LBV2_PATCHES += $(PACKAGE_DIR)/linuxbios/patches/m57sli-filo-and-etherboot-Config.lb.patch
+ CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/m57sli-filo-and-etherboot-Config.lb.patch
endif
ifeq ($(CONFIG_PAYLOAD_ETHERBOOT),y)
- LBV2_PATCHES += $(PACKAGE_DIR)/linuxbios/patches/m57sli-filo-and-etherboot-Config.lb.patch
+ CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/m57sli-filo-and-etherboot-Config.lb.patch
endif
ifeq ($(CONFIG_PAYLOAD_KERNEL),y)
- LBV2_PATCHES += $(PACKAGE_DIR)/linuxbios/patches/m57sli-kernel-and-lab-Config.lb.patch
+ CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/m57sli-kernel-and-lab-Config.lb.patch
endif
ifeq ($(CONFIG_PAYLOAD_LAB),y)
- LBV2_PATCHES += $(PACKAGE_DIR)/linuxbios/patches/m57sli-kernel-and-lab-Config.lb.patch
+ CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/m57sli-kernel-and-lab-Config.lb.patch
endif
-LBV2_BASE_DIR=svn
-LBV2_URL=svn://linuxbios.org/repos/trunk/LinuxBIOSv2
-LBV2_TARBALL=linuxbios-svn-$(LBV2_TAG).tar.gz
-LBV2_PAYLOAD_TARGET=$(LBV2_BUILD_DIR)/payload.elf
-TARGET_ROM = $(LINUXBIOS_VENDOR)-$(LINUXBIOS_BOARD).rom
+CBV2_BASE_DIR=svn
+CBV2_URL=svn://coreboot.org/repos/trunk/coreboot-v2
+CBV2_TARBALL=coreboot-svn-$(CBV2_TAG).tar.gz
+CBV2_PAYLOAD_TARGET=$(CBV2_BUILD_DIR)/payload.elf
+TARGET_ROM = $(COREBOOT_VENDOR)-$(COREBOOT_BOARD).rom
-include $(PACKAGE_DIR)/linuxbios/linuxbios.inc
+include $(PACKAGE_DIR)/coreboot-v2/coreboot.inc
-$(SOURCE_DIR)/$(LBV2_TARBALL):
- @ echo "Fetching the LinuxBIOS code..."
- @ mkdir -p $(SOURCE_DIR)/linuxbios
- @ $(BIN_DIR)/fetchsvn.sh $(LBV2_URL) $(SOURCE_DIR)/linuxbios \
- $(LBV2_TAG) $(SOURCE_DIR)/$(LBV2_TARBALL) \
- > $(LBV2_FETCH_LOG) 2>&1
+$(SOURCE_DIR)/$(CBV2_TARBALL):
+ @ echo "Fetching the coreboot code..."
+ @ mkdir -p $(SOURCE_DIR)/coreboot
+ @ $(BIN_DIR)/fetchsvn.sh $(CBV2_URL) $(SOURCE_DIR)/coreboot \
+ $(CBV2_TAG) $(SOURCE_DIR)/$(CBV2_TARBALL) \
+ > $(CBV2_FETCH_LOG) 2>&1
-$(OUTPUT_DIR)/$(TARGET_ROM): $(LBV2_OUTPUT)
+$(OUTPUT_DIR)/$(TARGET_ROM): $(CBV2_OUTPUT)
@ mkdir -p $(OUTPUT_DIR)
- @ cat $(LBV2_OUTPUT) > $@
+ @ cat $(CBV2_OUTPUT) > $@
-linuxbios: $(OUTPUT_DIR)/$(TARGET_ROM)
-linuxbios-clean: generic-linuxbios-clean
-linuxbios-distclean: generic-linuxbios-distclean
+coreboot: $(OUTPUT_DIR)/$(TARGET_ROM)
+coreboot-clean: generic-coreboot-clean
+coreboot-distclean: generic-coreboot-distclean
Modified: buildrom-devel/packages/linuxbios/msm800sev-linuxbios.mk
===================================================================
--- buildrom-devel/packages/linuxbios/msm800sev-linuxbios.mk 2008-01-11 22:53:36 UTC (rev 95)
+++ buildrom-devel/packages/linuxbios/msm800sev-linuxbios.mk 2008-01-18 16:57:20 UTC (rev 96)
@@ -1,38 +1,38 @@
-# This is the Generic LinuxBIOS target
+# This is the Generic coreboot target
ifeq ($(CONFIG_PLATFORM),y)
-ifeq ($(LBV2_TAG),)
+ifeq ($(CBV2_TAG),)
$(error You need to specify a version to pull in your platform config)
endif
endif
-LBV2_BASE_DIR=svn
-LBV2_URL=svn://openbios.org/repos/trunk/LinuxBIOSv2
-LBV2_TARBALL=linuxbios-svn-$(LBV2_TAG).tar.gz
-LBV2_PAYLOAD_TARGET=$(LBV2_BUILD_DIR)/payload.elf
+CBV2_BASE_DIR=svn
+CBV2_URL=svn://coreboot.org/repos/trunk/coreboot-v2
+CBV2_TARBALL=coreboot-svn-$(CBV2_TAG).tar.gz
+CBV2_PAYLOAD_TARGET=$(CBV2_BUILD_DIR)/payload.elf
VSA_URL=http://www.amd.com/files/connectivitysolutions/geode/geode_lx/
-LBV2_VSA=lx_vsa.36k.bin
-TARGET_ROM = $(LINUXBIOS_VENDOR)-$(LINUXBIOS_BOARD).rom
+CBV2_VSA=lx_vsa.36k.bin
+TARGET_ROM = $(COREBOOT_VENDOR)-$(COREBOOT_BOARD).rom
-include $(PACKAGE_DIR)/linuxbios/linuxbios.inc
+include $(PACKAGE_DIR)/coreboot-v2/coreboot.inc
-$(SOURCE_DIR)/$(LBV2_VSA):
+$(SOURCE_DIR)/$(CBV2_VSA):
@ echo "Fetching the VSA code..."
- wget -P $(SOURCE_DIR) $(VSA_URL)/$(LBV2_VSA).gz -O $@
+ wget -P $(SOURCE_DIR) $(VSA_URL)/$(CBV2_VSA).gz -O $@
-$(SOURCE_DIR)/$(LBV2_TARBALL):
- @ echo "Fetching the LinuxBIOS code..."
- @ mkdir -p $(SOURCE_DIR)/linuxbios
- @ $(BIN_DIR)/fetchsvn.sh $(LBV2_URL) $(SOURCE_DIR)/linuxbios \
- $(LBV2_TAG) $(SOURCE_DIR)/$(LBV2_TARBALL) \
- > $(LBV2_FETCH_LOG) 2>&1
+$(SOURCE_DIR)/$(CBV2_TARBALL):
+ @ echo "Fetching the coreboot code..."
+ @ mkdir -p $(SOURCE_DIR)/coreboot
+ @ $(BIN_DIR)/fetchsvn.sh $(CBV2_URL) $(SOURCE_DIR)/coreboot \
+ $(CBV2_TAG) $(SOURCE_DIR)/$(CBV2_TARBALL) \
+ > $(CBV2_FETCH_LOG) 2>&1
# Special rule - append the VSA
-$(OUTPUT_DIR)/$(TARGET_ROM): $(LBV2_OUTPUT) $(SOURCE_DIR)/$(LBV2_VSA)
+$(OUTPUT_DIR)/$(TARGET_ROM): $(CBV2_OUTPUT) $(SOURCE_DIR)/$(CBV2_VSA)
@ mkdir -p $(OUTPUT_DIR)
- @ cat $(SOURCE_DIR)/$(LBV2_VSA) $(LBV2_OUTPUT) > $@
+ @ cat $(SOURCE_DIR)/$(CBV2_VSA) $(CBV2_OUTPUT) > $@
-linuxbios: $(OUTPUT_DIR)/$(TARGET_ROM)
-linuxbios-clean: generic-linuxbios-clean
-linuxbios-distclean: generic-linuxbios-distclean
+coreboot: $(OUTPUT_DIR)/$(TARGET_ROM)
+coreboot-clean: generic-coreboot-clean
+coreboot-distclean: generic-coreboot-distclean
Modified: buildrom-devel/packages/linuxbios/norwich-linuxbios.mk
===================================================================
--- buildrom-devel/packages/linuxbios/norwich-linuxbios.mk 2008-01-11 22:53:36 UTC (rev 95)
+++ buildrom-devel/packages/linuxbios/norwich-linuxbios.mk 2008-01-18 16:57:20 UTC (rev 96)
@@ -1,40 +1,40 @@
-# This is the Generic LinuxBIOS target
+# This is the Generic coreboot target
ifeq ($(CONFIG_PLATFORM),y)
-ifeq ($(LBV2_TAG),)
+ifeq ($(CBV2_TAG),)
$(error You need to specify a version to pull in your platform config)
else
-$(warning You specified $(LBV2_TAG) a version to pull in your platform config)
+$(warning You specified $(CBV2_TAG) a version to pull in your platform config)
endif
endif
-LBV2_BASE_DIR=svn
-LBV2_URL=svn://openbios.org/repos/trunk/LinuxBIOSv2
-LBV2_TARBALL=linuxbios-svn-$(LBV2_TAG).tar.gz
-LBV2_PAYLOAD_TARGET=$(LBV2_BUILD_DIR)/payload.elf
+CBV2_BASE_DIR=svn
+CBV2_URL=svn://coreboot.org/repos/trunk/coreboot-v2
+CBV2_TARBALL=coreboot-svn-$(CBV2_TAG).tar.gz
+CBV2_PAYLOAD_TARGET=$(CBV2_BUILD_DIR)/payload.elf
VSA_URL=http://www.amd.com/files/connectivitysolutions/geode/geode_lx/
-LBV2_VSA=lx_vsa.36k.bin
-TARGET_ROM = $(LINUXBIOS_VENDOR)-$(LINUXBIOS_BOARD).rom
+CBV2_VSA=lx_vsa.36k.bin
+TARGET_ROM = $(COREBOOT_VENDOR)-$(COREBOOT_BOARD).rom
-include $(PACKAGE_DIR)/linuxbios/linuxbios.inc
+include $(PACKAGE_DIR)/coreboot-v2/coreboot.inc
-$(SOURCE_DIR)/$(LBV2_VSA):
+$(SOURCE_DIR)/$(CBV2_VSA):
@ echo "Fetching the VSA code..."
- wget -P $(SOURCE_DIR) $(VSA_URL)/$(LBV2_VSA).gz -O $@
+ wget -P $(SOURCE_DIR) $(VSA_URL)/$(CBV2_VSA).gz -O $@
-$(SOURCE_DIR)/$(LBV2_TARBALL):
- @ echo "Fetching the LinuxBIOS rev $(LBV2_TAG) code..."
- @ mkdir -p $(SOURCE_DIR)/linuxbios
- @ $(BIN_DIR)/fetchsvn.sh $(LBV2_URL) $(SOURCE_DIR)/linuxbios \
- $(LBV2_TAG) $(SOURCE_DIR)/$(LBV2_TARBALL) \
- > $(LBV2_FETCH_LOG) 2>&1
+$(SOURCE_DIR)/$(CBV2_TARBALL):
+ @ echo "Fetching the coreboot rev $(CBV2_TAG) code..."
+ @ mkdir -p $(SOURCE_DIR)/coreboot
+ @ $(BIN_DIR)/fetchsvn.sh $(CBV2_URL) $(SOURCE_DIR)/coreboot \
+ $(CBV2_TAG) $(SOURCE_DIR)/$(CBV2_TARBALL) \
+ > $(CBV2_FETCH_LOG) 2>&1
# Special rule - append the VSA
-$(OUTPUT_DIR)/$(TARGET_ROM): $(LBV2_OUTPUT) $(SOURCE_DIR)/$(LBV2_VSA)
+$(OUTPUT_DIR)/$(TARGET_ROM): $(CBV2_OUTPUT) $(SOURCE_DIR)/$(CBV2_VSA)
@ mkdir -p $(OUTPUT_DIR)
- @ cat $(SOURCE_DIR)/$(LBV2_VSA) $(LBV2_OUTPUT) > $@
+ @ cat $(SOURCE_DIR)/$(CBV2_VSA) $(CBV2_OUTPUT) > $@
-linuxbios: $(OUTPUT_DIR)/$(TARGET_ROM)
-linuxbios-clean: generic-linuxbios-clean
-linuxbios-distclean: generic-linuxbios-distclean
+coreboot: $(OUTPUT_DIR)/$(TARGET_ROM)
+coreboot-clean: generic-coreboot-clean
+coreboot-distclean: generic-coreboot-distclean
Modified: buildrom-devel/packages/linuxbios/optionroms.inc
===================================================================
--- buildrom-devel/packages/linuxbios/optionroms.inc 2008-01-11 22:53:36 UTC (rev 95)
+++ buildrom-devel/packages/linuxbios/optionroms.inc 2008-01-18 16:57:20 UTC (rev 96)
@@ -1,7 +1,7 @@
-# Rules to download option roms from the LinuxBIOS option rom
+# Rules to download option roms from the coreboot option ROM(s)
# repository
-OPTIONROMURL=http://www.linuxbios.org/data/optionroms/
+OPTIONROMURL=http://coreboot.org/data/optionroms/
$(OUTPUT_DIR)/$(OPTIONROM_ID).license:
@ mkdir -p $(OUTPUT_DIR)
Modified: buildrom-devel/packages/linuxbios/qemu.mk
===================================================================
--- buildrom-devel/packages/linuxbios/qemu.mk 2008-01-11 22:53:36 UTC (rev 95)
+++ buildrom-devel/packages/linuxbios/qemu.mk 2008-01-18 16:57:20 UTC (rev 96)
@@ -1,40 +1,40 @@
-# This is the QEMU LinuxBIOS target
+# This is the QEMU coreboot target
ifeq ($(CONFIG_PLATFORM),y)
-ifeq ($(LBV2_TAG),)
+ifeq ($(CBV2_TAG),)
$(error You need to specify a version to pull in your platform config)
endif
endif
-LBV2_PATCHES =
+CBV2_PATCHES =
-LBV2_BASE_DIR=svn
-TARGET_ROM = $(LINUXBIOS_VENDOR)-$(LINUXBIOS_BOARD).rom
-LBV2_PAYLOAD_TARGET=$(LBV2_BUILD_DIR)/payload.elf
+CBV2_BASE_DIR=svn
+TARGET_ROM = $(COREBOOT_VENDOR)-$(COREBOOT_BOARD).rom
+CBV2_PAYLOAD_TARGET=$(CBV2_BUILD_DIR)/payload.elf
ifeq ($(CONFIG_PAYLOAD_LAB),y)
-LBV2_PATCHES += $(PACKAGE_DIR)/linuxbios/patches/qemu-lab.patch
+CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/qemu-lab.patch
else
-LBV2_PATCHES += $(PACKAGE_DIR)/linuxbios/patches/qemu-payload.patch
+CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/qemu-payload.patch
endif
-LBV2_URL=svn://linuxbios.org/repos/trunk/LinuxBIOSv2
-LBV2_TARBALL=linuxbios-svn-$(LBV2_TAG).tar.gz
-LBV2_SVN_DIR=$(SOURCE_DIR)/linuxbios
+CBV2_URL=svn://coreboot.org/repos/trunk/coreboot-v2
+CBV2_TARBALL=coreboot-svn-$(CBV2_TAG).tar.gz
+CBV2_SVN_DIR=$(SOURCE_DIR)/coreboot
-include $(PACKAGE_DIR)/linuxbios/linuxbios.inc
+include $(PACKAGE_DIR)/coreboot-v2/coreboot.inc
-$(SOURCE_DIR)/$(LBV2_TARBALL):
- @ echo "Fetching the LinuxBIOS code..."
- @ mkdir -p $(SOURCE_DIR)/linuxbios
- @ $(BIN_DIR)/fetchsvn.sh $(LBV2_URL) $(LBV2_SVN_DIR) \
- $(LBV2_TAG) $(SOURCE_DIR)/$(LBV2_TARBALL) \
- > $(LBV2_FETCH_LOG) 2>&1
+$(SOURCE_DIR)/$(CBV2_TARBALL):
+ @ echo "Fetching the coreboot code..."
+ @ mkdir -p $(SOURCE_DIR)/coreboot
+ @ $(BIN_DIR)/fetchsvn.sh $(CBV2_URL) $(CBV2_SVN_DIR) \
+ $(CBV2_TAG) $(SOURCE_DIR)/$(CBV2_TARBALL) \
+ > $(CBV2_FETCH_LOG) 2>&1
-$(OUTPUT_DIR)/$(TARGET_ROM): $(LBV2_OUTPUT)
+$(OUTPUT_DIR)/$(TARGET_ROM): $(CBV2_OUTPUT)
@ mkdir -p $(OUTPUT_DIR)
@ cp $< $@
-linuxbios: $(OUTPUT_DIR)/$(TARGET_ROM)
-linuxbios-clean: generic-linuxbios-clean
-linuxbios-distclean: generic-linuxbios-distclean
+coreboot: $(OUTPUT_DIR)/$(TARGET_ROM)
+coreboot-clean: generic-coreboot-clean
+coreboot-distclean: generic-coreboot-distclean
Modified: buildrom-devel/packages/linuxbios/serengeti_cheetah.mk
===================================================================
--- buildrom-devel/packages/linuxbios/serengeti_cheetah.mk 2008-01-11 22:53:36 UTC (rev 95)
+++ buildrom-devel/packages/linuxbios/serengeti_cheetah.mk 2008-01-18 16:57:20 UTC (rev 96)
@@ -1,58 +1,58 @@
-# This is the Generic LinuxBIOS target
+# This is the Generic coreboot target
ifeq ($(CONFIG_PLATFORM),y)
-ifeq ($(LBV2_TAG),)
+ifeq ($(CBV2_TAG),)
$(error You need to specify a version to pull in your platform config)
endif
endif
-LBV2_PATCHES =
+CBV2_PATCHES =
# Make sure we have the tools we need to accomplish this
HAVE_IASL:=$(call find-tool,iasl)
ifeq ($(HAVE_IASL),n)
-$(error To build LinuxBIOS, you need to install the 'iasl' tool)
+$(error To build coreboot, you need to install the 'iasl' tool)
endif
ifeq ($(CONFIG_PLATFORM_CHEETAH_FAM10),y)
ifeq ($(CONFIG_PAYLOAD_LAB),y)
- LBV2_PATCHES += $(PACKAGE_DIR)/linuxbios/patches/serengeti_cheetah_fam10-lab.patch
+ CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/serengeti_cheetah_fam10-lab.patch
endif
endif
ifeq ($(CONFIG_PLATFORM_SERENGETI_CHEETAH),y)
ifeq ($(CONFIG_PAYLOAD_LAB),y)
- LBV2_PATCHES += $(PACKAGE_DIR)/linuxbios/patches/serengeti_cheetah-lab.patch
+ CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/serengeti_cheetah-lab.patch
else
- LBV2_PATCHES += $(PACKAGE_DIR)/linuxbios/patches/serengeti_cheetah-payload.patch
+ CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/serengeti_cheetah-payload.patch
endif
ifeq ($(CONFIG_SIMNOW),y)
-LBV2_PATCHES += $(PACKAGE_DIR)/linuxbios/patches/simnow.patch
+CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/simnow.patch
endif
endif
-LBV2_BASE_DIR=svn
-LBV2_URL=svn://linuxbios.org/repos/trunk/LinuxBIOSv2
-LBV2_TARBALL=linuxbios-svn-$(LBV2_TAG).tar.gz
-LBV2_PAYLOAD_TARGET=$(LBV2_BUILD_DIR)/payload.elf
-TARGET_ROM = $(LINUXBIOS_VENDOR)-$(LINUXBIOS_BOARD).rom
+CBV2_BASE_DIR=svn
+CBV2_URL=svn://coreboot.org/repos/trunk/coreboot-v2
+CBV2_TARBALL=coreboot-svn-$(CBV2_TAG).tar.gz
+CBV2_PAYLOAD_TARGET=$(CBV2_BUILD_DIR)/payload.elf
+TARGET_ROM = $(COREBOOT_VENDOR)-$(COREBOOT_BOARD).rom
-include $(PACKAGE_DIR)/linuxbios/linuxbios.inc
+include $(PACKAGE_DIR)/coreboot-v2/coreboot.inc
-$(SOURCE_DIR)/$(LBV2_TARBALL):
- @ echo "Fetching the LinuxBIOS code..."
- @ mkdir -p $(SOURCE_DIR)/linuxbios
- @ $(BIN_DIR)/fetchsvn.sh $(LBV2_URL) $(SOURCE_DIR)/linuxbios \
- $(LBV2_TAG) $(SOURCE_DIR)/$(LBV2_TARBALL) \
- > $(LBV2_FETCH_LOG) 2>&1
+$(SOURCE_DIR)/$(CBV2_TARBALL):
+ @ echo "Fetching the coreboot code..."
+ @ mkdir -p $(SOURCE_DIR)/coreboot
+ @ $(BIN_DIR)/fetchsvn.sh $(CBV2_URL) $(SOURCE_DIR)/coreboot \
+ $(CBV2_TAG) $(SOURCE_DIR)/$(CBV2_TARBALL) \
+ > $(CBV2_FETCH_LOG) 2>&1
-$(OUTPUT_DIR)/$(TARGET_ROM): $(LBV2_OUTPUT)
+$(OUTPUT_DIR)/$(TARGET_ROM): $(CBV2_OUTPUT)
@ mkdir -p $(OUTPUT_DIR)
@ cp $< $@
-linuxbios: $(OUTPUT_DIR)/$(TARGET_ROM)
-linuxbios-clean: generic-linuxbios-clean
-linuxbios-distclean: generic-linuxbios-distclean
+coreboot: $(OUTPUT_DIR)/$(TARGET_ROM)
+coreboot-clean: generic-coreboot-clean
+coreboot-distclean: generic-coreboot-distclean
Modified: buildrom-devel/packages/linuxbios/supermicro-h8dmr-linuxbios.mk
===================================================================
--- buildrom-devel/packages/linuxbios/supermicro-h8dmr-linuxbios.mk 2008-01-11 22:53:36 UTC (rev 95)
+++ buildrom-devel/packages/linuxbios/supermicro-h8dmr-linuxbios.mk 2008-01-18 16:57:20 UTC (rev 96)
@@ -1,49 +1,49 @@
-# This is the Generic LinuxBIOS target
+# This is the Generic coreboot target
ifeq ($(CONFIG_PLATFORM),y)
-ifeq ($(LBV2_TAG),)
+ifeq ($(CBV2_TAG),)
$(error You need to specify a version to pull in your platform config)
endif
endif
-LBV2_PATCHES =
+CBV2_PATCHES =
ifeq ($(CONFIG_PAYLOAD_FILO),y)
- LBV2_PATCHES += $(PACKAGE_DIR)/linuxbios/patches/supermicro-h8dmr-filo-and-etherboot-Config.lb.patch
+ CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/supermicro-h8dmr-filo-and-etherboot-Config.lb.patch
endif
ifeq ($(CONFIG_PAYLOAD_ETHERBOOT),y)
- LBV2_PATCHES += $(PACKAGE_DIR)/linuxbios/patches/supermicro-h8dmr-filo-and-etherboot-Config.lb.patch
+ CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/supermicro-h8dmr-filo-and-etherboot-Config.lb.patch
endif
ifeq ($(CONFIG_PAYLOAD_KERNEL),y)
- LBV2_PATCHES += $(PACKAGE_DIR)/linuxbios/patches/supermicro-h8dmr-kernel-and-lab-Config.lb.patch
+ CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/supermicro-h8dmr-kernel-and-lab-Config.lb.patch
endif
ifeq ($(CONFIG_PAYLOAD_LAB),y)
- LBV2_PATCHES += $(PACKAGE_DIR)/linuxbios/patches/supermicro-h8dmr-kernel-and-lab-Config.lb.patch
+ CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/supermicro-h8dmr-kernel-and-lab-Config.lb.patch
endif
-LBV2_BASE_DIR=svn
-LBV2_URL=svn://linuxbios.org/repos/trunk/LinuxBIOSv2
-LBV2_TARBALL=linuxbios-svn-$(LBV2_TAG).tar.gz
-LBV2_PAYLOAD_TARGET=$(LBV2_BUILD_DIR)/payload.elf
-TARGET_ROM = $(LINUXBIOS_VENDOR)-$(LINUXBIOS_BOARD).rom
+CBV2_BASE_DIR=svn
+CBV2_URL=svn://coreboot.org/repos/trunk/coreboot-v2
+CBV2_TARBALL=coreboot-svn-$(CBV2_TAG).tar.gz
+CBV2_PAYLOAD_TARGET=$(CBV2_BUILD_DIR)/payload.elf
+TARGET_ROM = $(COREBOOT_VENDOR)-$(COREBOOT_BOARD).rom
-include $(PACKAGE_DIR)/linuxbios/linuxbios.inc
+include $(PACKAGE_DIR)/coreboot-v2/coreboot.inc
-$(SOURCE_DIR)/$(LBV2_TARBALL):
- @ echo "Fetching the LinuxBIOS code..."
- @ mkdir -p $(SOURCE_DIR)/linuxbios
- @ $(BIN_DIR)/fetchsvn.sh $(LBV2_URL) $(SOURCE_DIR)/linuxbios \
- $(LBV2_TAG) $(SOURCE_DIR)/$(LBV2_TARBALL) \
- > $(LBV2_FETCH_LOG) 2>&1
+$(SOURCE_DIR)/$(CBV2_TARBALL):
+ @ echo "Fetching the coreboot code..."
+ @ mkdir -p $(SOURCE_DIR)/coreboot
+ @ $(BIN_DIR)/fetchsvn.sh $(CBV2_URL) $(SOURCE_DIR)/coreboot \
+ $(CBV2_TAG) $(SOURCE_DIR)/$(CBV2_TARBALL) \
+ > $(CBV2_FETCH_LOG) 2>&1
-$(OUTPUT_DIR)/$(TARGET_ROM): $(LBV2_OUTPUT)
+$(OUTPUT_DIR)/$(TARGET_ROM): $(CBV2_OUTPUT)
@ mkdir -p $(OUTPUT_DIR)
- @ cat $(LBV2_OUTPUT) > $@
+ @ cat $(CBV2_OUTPUT) > $@
-linuxbios: $(OUTPUT_DIR)/$(TARGET_ROM)
-linuxbios-clean: generic-linuxbios-clean
-linuxbios-distclean: generic-linuxbios-distclean
+coreboot: $(OUTPUT_DIR)/$(TARGET_ROM)
+coreboot-clean: generic-coreboot-clean
+coreboot-distclean: generic-coreboot-distclean
Modified: buildrom-devel/packages/linuxbios/tyan-s2882-linuxbios.mk
===================================================================
--- buildrom-devel/packages/linuxbios/tyan-s2882-linuxbios.mk 2008-01-11 22:53:36 UTC (rev 95)
+++ buildrom-devel/packages/linuxbios/tyan-s2882-linuxbios.mk 2008-01-18 16:57:20 UTC (rev 96)
@@ -1,45 +1,45 @@
-# This is the Generic LinuxBIOS target
+# This is the Generic coreboot target
ifeq ($(CONFIG_PLATFORM),y)
-ifeq ($(LBV2_TAG),)
+ifeq ($(CBV2_TAG),)
$(error You need to specify a version to pull in your platform config)
endif
endif
-LBV2_PATCHES =
+CBV2_PATCHES =
ifeq ($(CONFIG_PAYLOAD_FILO),y)
- LBV2_PATCHES += $(PACKAGE_DIR)/linuxbios/patches/tyan-s2882-filo-Config.lb.patch
+ CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/tyan-s2882-filo-Config.lb.patch
endif
ifeq ($(CONFIG_PAYLOAD_KERNEL),y)
- LBV2_PATCHES += $(PACKAGE_DIR)/linuxbios/patches/tyan-s2882-kernel-and-lab-Config.lb.patch
+ CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/tyan-s2882-kernel-and-lab-Config.lb.patch
endif
ifeq ($(CONFIG_PAYLOAD_LAB),y)
- LBV2_PATCHES += $(PACKAGE_DIR)/linuxbios/patches/tyan-s2882-kernel-and-lab-Config.lb.patch
+ CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/tyan-s2882-kernel-and-lab-Config.lb.patch
endif
-LBV2_BASE_DIR=svn
-LBV2_URL=svn://linuxbios.org/repos/trunk/LinuxBIOSv2
-LBV2_TARBALL=linuxbios-svn-$(LBV2_TAG).tar.gz
-LBV2_PAYLOAD_TARGET=$(LBV2_BUILD_DIR)/payload.elf
-TARGET_ROM = $(LINUXBIOS_VENDOR)-$(LINUXBIOS_BOARD).rom
+CBV2_BASE_DIR=svn
+CBV2_URL=svn://coreboot.org/repos/trunk/coreboot-v2
+CBV2_TARBALL=coreboot-svn-$(CBV2_TAG).tar.gz
+CBV2_PAYLOAD_TARGET=$(CBV2_BUILD_DIR)/payload.elf
+TARGET_ROM = $(COREBOOT_VENDOR)-$(COREBOOT_BOARD).rom
-include $(PACKAGE_DIR)/linuxbios/linuxbios.inc
+include $(PACKAGE_DIR)/coreboot-v2/coreboot.inc
-$(SOURCE_DIR)/$(LBV2_TARBALL):
- @ echo "Fetching the LinuxBIOS code..."
- @ mkdir -p $(SOURCE_DIR)/linuxbios
- @ $(BIN_DIR)/fetchsvn.sh $(LBV2_URL) $(SOURCE_DIR)/linuxbios \
- $(LBV2_TAG) $(SOURCE_DIR)/$(LBV2_TARBALL) \
- > $(LBV2_FETCH_LOG) 2>&1
+$(SOURCE_DIR)/$(CBV2_TARBALL):
+ @ echo "Fetching the coreboot code..."
+ @ mkdir -p $(SOURCE_DIR)/coreboot
+ @ $(BIN_DIR)/fetchsvn.sh $(CBV2_URL) $(SOURCE_DIR)/coreboot \
+ $(CBV2_TAG) $(SOURCE_DIR)/$(CBV2_TARBALL) \
+ > $(CBV2_FETCH_LOG) 2>&1
-$(OUTPUT_DIR)/$(TARGET_ROM): $(LBV2_OUTPUT)
+$(OUTPUT_DIR)/$(TARGET_ROM): $(CBV2_OUTPUT)
@ mkdir -p $(OUTPUT_DIR)
- @ cat $(LBV2_OUTPUT) > $@
+ @ cat $(CBV2_OUTPUT) > $@
-linuxbios: $(OUTPUT_DIR)/$(TARGET_ROM)
-linuxbios-clean: generic-linuxbios-clean
-linuxbios-distclean: generic-linuxbios-distclean
+coreboot: $(OUTPUT_DIR)/$(TARGET_ROM)
+coreboot-clean: generic-coreboot-clean
+coreboot-distclean: generic-coreboot-distclean
Modified: buildrom-devel/packages/linuxbios/tyan-s2891-linuxbios.mk
===================================================================
--- buildrom-devel/packages/linuxbios/tyan-s2891-linuxbios.mk 2008-01-11 22:53:36 UTC (rev 95)
+++ buildrom-devel/packages/linuxbios/tyan-s2891-linuxbios.mk 2008-01-18 16:57:20 UTC (rev 96)
@@ -1,45 +1,45 @@
-# This is the Generic LinuxBIOS target
+# This is the Generic coreboot target
ifeq ($(CONFIG_PLATFORM),y)
-ifeq ($(LBV2_TAG),)
+ifeq ($(CBV2_TAG),)
$(error You need to specify a version to pull in your platform config)
endif
endif
-LBV2_PATCHES =
+CBV2_PATCHES =
ifeq ($(CONFIG_PAYLOAD_FILO),y)
- LBV2_PATCHES += $(PACKAGE_DIR)/linuxbios/patches/tyan-s2891-filo-Config.lb.patch
+ CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/tyan-s2891-filo-Config.lb.patch
endif
ifeq ($(CONFIG_PAYLOAD_KERNEL),y)
- LBV2_PATCHES += $(PACKAGE_DIR)/linuxbios/patches/tyan-s2891-kernel-and-lab-Config.lb.patch
+ CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/tyan-s2891-kernel-and-lab-Config.lb.patch
endif
ifeq ($(CONFIG_PAYLOAD_LAB),y)
- LBV2_PATCHES += $(PACKAGE_DIR)/linuxbios/patches/tyan-s2891-kernel-and-lab-Config.lb.patch
+ CBV2_PATCHES += $(PACKAGE_DIR)/coreboot-v2/patches/tyan-s2891-kernel-and-lab-Config.lb.patch
endif
-LBV2_BASE_DIR=svn
-LBV2_URL=svn://linuxbios.org/repos/trunk/LinuxBIOSv2
-LBV2_TARBALL=linuxbios-svn-$(LBV2_TAG).tar.gz
-LBV2_PAYLOAD_TARGET=$(LBV2_BUILD_DIR)/payload.elf
-TARGET_ROM = $(LINUXBIOS_VENDOR)-$(LINUXBIOS_BOARD).rom
+CBV2_BASE_DIR=svn
+CBV2_URL=svn://coreboot.org/repos/trunk/coreboot-v2
+CBV2_TARBALL=coreboot-svn-$(CBV2_TAG).tar.gz
+CBV2_PAYLOAD_TARGET=$(CBV2_BUILD_DIR)/payload.elf
+TARGET_ROM = $(COREBOOT_VENDOR)-$(COREBOOT_BOARD).rom
-include $(PACKAGE_DIR)/linuxbios/linuxbios.inc
+include $(PACKAGE_DIR)/coreboot-v2/coreboot.inc
-$(SOURCE_DIR)/$(LBV2_TARBALL):
- @ echo "Fetching the LinuxBIOS code..."
- @ mkdir -p $(SOURCE_DIR)/linuxbios
- @ $(BIN_DIR)/fetchsvn.sh $(LBV2_URL) $(SOURCE_DIR)/linuxbios \
- $(LBV2_TAG) $(SOURCE_DIR)/$(LBV2_TARBALL) \
- > $(LBV2_FETCH_LOG) 2>&1
+$(SOURCE_DIR)/$(CBV2_TARBALL):
+ @ echo "Fetching the coreboot code..."
+ @ mkdir -p $(SOURCE_DIR)/coreboot
+ @ $(BIN_DIR)/fetchsvn.sh $(CBV2_URL) $(SOURCE_DIR)/coreboot \
+ $(CBV2_TAG) $(SOURCE_DIR)/$(CBV2_TARBALL) \
+ > $(CBV2_FETCH_LOG) 2>&1
-$(OUTPUT_DIR)/$(TARGET_ROM): $(LBV2_OUTPUT)
+$(OUTPUT_DIR)/$(TARGET_ROM): $(CBV2_OUTPUT)
@ mkdir -p $(OUTPUT_DIR)
- @ cat $(LBV2_OUTPUT) > $@
+ @ cat $(CBV2_OUTPUT) > $@
-linuxbios: $(OUTPUT_DIR)/$(TARGET_ROM)
-linuxbios-clean: generic-linuxbios-clean
-linuxbios-distclean: generic-linuxbios-distclean
+coreboot: $(OUTPUT_DIR)/$(TARGET_ROM)
+coreboot-clean: generic-coreboot-clean
+coreboot-distclean: generic-coreboot-distclean
Modified: buildrom-devel/packages/linuxbiosv3/linuxbiosv3.mk
===================================================================
--- buildrom-devel/packages/linuxbiosv3/linuxbiosv3.mk 2008-01-11 22:53:36 UTC (rev 95)
+++ buildrom-devel/packages/linuxbiosv3/linuxbiosv3.mk 2008-01-18 16:57:20 UTC (rev 96)
@@ -1,76 +1,76 @@
-ifeq ($(LBV3_TAG),)
+ifeq ($(CBV3_TAG),)
$(error You need to specify a version to pull in your platform config)
endif
-LBV3_URL=svn://openbios.org/repository/LinuxBIOSv3
-LBV3_TARBALL=linuxbios-svn-$(LBV3_TAG).tar.gz
-LBV3_DIR=$(BUILD_DIR)/linuxbiosv3
-LBV3_SRC_DIR=$(LBV3_DIR)/svn
+CBV3_URL=svn://coreboot.org/repository/coreboot-v3
+CBV3_TARBALL=coreboot-svn-$(CBV3_TAG).tar.gz
+CBV3_DIR=$(BUILD_DIR)/coreboot-v3
+CBV3_SRC_DIR=$(CBV3_DIR)/svn
-LBV3_STAMP_DIR=$(LBV3_DIR)/stamps
-LBV3_LOG_DIR=$(LBV3_DIR)/logs
+CBV3_STAMP_DIR=$(CBV3_DIR)/stamps
+CBV3_LOG_DIR=$(CBV3_DIR)/logs
ifeq ($(CONFIG_VERBOSE),y)
-LBV3_FETCH_LOG=/dev/stdout
-LBV3_CONFIG_LOG=/dev/stdout
-LBV3_BUILD_LOG=/dev/stdout
+CBV3_FETCH_LOG=/dev/stdout
+CBV3_CONFIG_LOG=/dev/stdout
+CBV3_BUILD_LOG=/dev/stdout
else
-LBV3_FETCH_LOG=$(LBV3_LOG_DIR)/fetch.log
-LBV3_CONFIG_LOG=$(LBV3_LOG_DIR)/config.log
-LBV3_BUILD_LOG=$(LBV3_LOG_DIR)/build.log
+CBV3_FETCH_LOG=$(CBV3_LOG_DIR)/fetch.log
+CBV3_CONFIG_LOG=$(CBV3_LOG_DIR)/config.log
+CBV3_BUILD_LOG=$(CBV3_LOG_DIR)/build.log
endif
-TARGET_ROM = $(LINUXBIOS_VENDOR)-$(LINUXBIOS_BOARD).rom
+TARGET_ROM = $(COREBOOT_VENDOR)-$(COREBOOT_BOARD).rom
-LBV3_OUTPUT=$(LBV3_SRC_DIR)/build/linuxbios.rom
+CBV3_OUTPUT=$(CBV3_SRC_DIR)/build/coreboot.rom
-LBV3_PATCHES ?=
+CBV3_PATCHES ?=
-$(SOURCE_DIR)/$(LBV3_TARBALL):
- @ mkdir -p $(SOURCE_DIR)/linuxbiosv3
- @ $(BIN_DIR)/fetchsvn.sh $(LBV3_URL) \
- $(SOURCE_DIR)/linuxbiosv3 $(LBV3_TAG) \
- $@ > $(LBV3_FETCH_LOG) 2>&1
+$(SOURCE_DIR)/$(CBV3_TARBALL):
+ @ mkdir -p $(SOURCE_DIR)/coreboot-v3
+ @ $(BIN_DIR)/fetchsvn.sh $(CBV3_URL) \
+ $(SOURCE_DIR)/coreboot-v3 $(CBV3_TAG) \
+ $@ > $(CBV3_FETCH_LOG) 2>&1
-$(LBV3_STAMP_DIR)/.unpacked: $(SOURCE_DIR)/$(LBV3_TARBALL)
- @echo "Unpacking LinuxBIOSv3..."
- @ mkdir -p $(LBV3_DIR)
- @ tar -C $(LBV3_DIR) -zxf $(SOURCE_DIR)/$(LBV3_TARBALL)
+$(CBV3_STAMP_DIR)/.unpacked: $(SOURCE_DIR)/$(CBV3_TARBALL)
+ @echo "Unpacking coreboot v3..."
+ @ mkdir -p $(CBV3_DIR)
+ @ tar -C $(CBV3_DIR) -zxf $(SOURCE_DIR)/$(CBV3_TARBALL)
@ touch $@
-$(LBV3_STAMP_DIR)/.patched: $(LBV3_STAMP_DIR)/.unpacked
- @ echo "Patching LinuxBIOSv3..."
- @ $(BIN_DIR)/doquilt.sh $(LBV3_SRC_DIR) $(LBV3_PATCHES)
+$(CBV3_STAMP_DIR)/.patched: $(CBV3_STAMP_DIR)/.unpacked
+ @ echo "Patching coreboot v3..."
+ @ $(BIN_DIR)/doquilt.sh $(CBV3_SRC_DIR) $(CBV3_PATCHES)
@ touch $@
-$(LBV3_STAMP_DIR)/.configured: $(LBV3_STAMP_DIR)/.patched
- @ echo "Configuring LinuxBIOSv3..."
- @ cp $(PACKAGE_DIR)/linuxbiosv3/conf/$(LBV3_CONFIG) $(LBV3_SRC_DIR)/.config
- @ make -C $(LBV3_SRC_DIR) oldconfig > $(LBV3_CONFIG_LOG) 2>&1
+$(CBV3_STAMP_DIR)/.configured: $(CBV3_STAMP_DIR)/.patched
+ @ echo "Configuring coreboot v3..."
+ @ cp $(PACKAGE_DIR)/coreboot-v3/conf/$(CBV3_CONFIG) $(CBV3_SRC_DIR)/.config
+ @ make -C $(CBV3_SRC_DIR) oldconfig > $(CBV3_CONFIG_LOG) 2>&1
@ touch $@
-$(LBV3_OUTPUT): $(LBV3_STAMP_DIR)/.configured
- @ echo "Building LinuxBIOSv3..."
- @ $(MAKE) -C $(LBV3_SRC_DIR) > $(LBV3_BUILD_LOG) 2>&1
+$(CBV3_OUTPUT): $(CBV3_STAMP_DIR)/.configured
+ @ echo "Building coreboot v3..."
+ @ $(MAKE) -C $(CBV3_SRC_DIR) > $(CBV3_BUILD_LOG) 2>&1
-$(LBV3_SRC_DIR)/build/util/lar/lar: $(LBV3_STAMP_DIR)/.configured
- @ $(MAKE) -C $(LBV3_SRC_DIR)/util lar > $(LBV3_BUILD_LOG) 2>&1
+$(CBV3_SRC_DIR)/build/util/lar/lar: $(CBV3_STAMP_DIR)/.configured
+ @ $(MAKE) -C $(CBV3_SRC_DIR)/util lar > $(CBV3_BUILD_LOG) 2>&1
-$(STAGING_DIR)/bin/lar: $(LBV3_SRC_DIR)/build/util/lar/lar
+$(STAGING_DIR)/bin/lar: $(CBV3_SRC_DIR)/build/util/lar/lar
@ mkdir -p $(STAGING_DIR)/bin
@ cp $< $@
-$(LBV3_STAMP_DIR) $(LBV3_LOG_DIR):
+$(CBV3_STAMP_DIR) $(CBV3_LOG_DIR):
@ mkdir -p $@
-linuxbiosv3: $(LBV3_LOG_DIR) $(LBV3_STAMP_DIR) $(LBV3_OUTPUT) $(STAGING_DIR)/bin/lar
+coreboot-v3: $(CBV3_LOG_DIR) $(CBV3_STAMP_DIR) $(CBV3_OUTPUT) $(STAGING_DIR)/bin/lar
-linuxbiosv3-clean:
- @ echo "Cleaning linuxbiosv3..."
- @ $(MAKE) -C $(LBV3_SRC_DIR) clean > /dev/null 2>&1
+coreboot-v3-clean:
+ @ echo "Cleaning coreboot v3..."
+ @ $(MAKE) -C $(CBV3_SRC_DIR) clean > /dev/null 2>&1
-linuxbiosv3-distclean:
- @ rm -rf $(LBV3_DIR)/*
+coreboot-v3-distclean:
+ @ rm -rf $(CBV3_DIR)/*
@ rm -rf $(STAGING_DIR)/bin/lar
Modified: buildrom-devel/scripts/defconfig
===================================================================
--- buildrom-devel/scripts/defconfig 2008-01-11 22:53:36 UTC (rev 95)
+++ buildrom-devel/scripts/defconfig 2008-01-18 16:57:20 UTC (rev 96)
@@ -8,11 +8,11 @@
# CONFIG_ADVANCED is not set
#
-# LinuxBIOS configuration
+# coreboot configuration
#
CONFIG_USE_LZMA=y
-# CONFIG_LB_USE_BUILD is not set
-CONFIG_LB_BUILDDIR=""
+# CONFIG_CB_USE_BUILD is not set
+CONFIG_CB_BUILDDIR=""
CONFIG_PLATFORM=y
CONFIG_PAYLOAD=y
More information about the coreboot
mailing list