[coreboot] i82801xx nic problems.

[joe at smittys.pointclark.net]

Quoting Peter Stuge <peter at stuge.se>:

> On Wed, Jan 30, 2008 at 09:50:08AM -0500, joe at smittys.pointclark.net wrote:
>> device pci 1e.0 on # PCI bridge: Intel Corporation 82801 PCI Bridge
>> chip drivers/pci/onboard
>> device pci 08.0 on end # Intel Corporation 82801DB PRO/100 VE Ethernet
>>
>> do_pci_scan_bridge for PCI: 00:1e.0
>> PCI: pci_scan_bus for bus 01
>> PCI: devfn 0x38, bad id 0xffffffff
>> Disabling static device: PCI: 01:08.0
>
> It was mentioned a while ago that the PCI ids in debug output is
> offset by one from the config ids. I don't know for sure, but it's
> worth investigating.
>
>
> //Peter
>
Hmm the correct device id is listed in pci_ids.h, is that what you mean?
I have a feeling that the nic is not powering on. With the original  
bios the lights on the nic come on about 3 seconds after power up.  
With coreboot there are no lights at all. I wonder if there is a  
register switch to turn it on???? I'm stumped.....I wonder if the guys  
at etherboot could help me???


Thanks - Joe