[coreboot] patch: set dbe62 to have com2 on com1 address
Marc Jones
marc.jones at amd.com
Wed Mar 5 17:33:59 CET 2008
ron minnich wrote:
> On Wed, Mar 5, 2008 at 5:22 AM, Carl-Daniel Hailfinger
> <c-d.hailfinger.devel.2006 at gmx.net> wrote:
>
>> If you look at the dbe61 dts, you can see the same settings except that
>> dbe61 additionally sets com2_irq = "4".
>
> and there is a good question. I might have misread the v2 code, I will
> have to go back and check.
>
> But will com2 still interrupt on irq 3 no matter what? I'm never sure
> how things go on this chipset.
>
> ron
>
There is no chipset default. Each piece needs to be setup. If you didn't
set it in the mainboard dts it will use the chipset dts default.
Marc
--
Marc Jones
Senior Firmware Engineer
(970) 226-9684 Office
mailto:Marc.Jones at amd.com
http://www.amd.com/embeddedprocessors
More information about the coreboot
mailing list