[coreboot] RCA RM4100 Build Tutorial
joe at smittys.pointclark.net
joe at smittys.pointclark.net
Wed Mar 12 00:48:28 CET 2008
Quoting ron minnich <rminnich at gmail.com>:
> On Tue, Mar 11, 2008 at 4:42 PM, <joe at smittys.pointclark.net> wrote:
>>
>> Quoting ron minnich <rminnich at gmail.com>:
>
>> > i.e. did you just try all the other mods without doing this? I realize
>> > 2.0 is on its way out in the next year, but having to modify this
>> > file says something is very, very wrong.
>> >
>> Not quite sure what you mean? If your not going to use VGA you should
>> comment the rom stuff right? I tried something like:
>
> you should never need to change Config.lb files in the src/ tree. If
> you do, they are incorrectly
> set up. Or there is a bug in the config/build system -- I won't rule
> that out either :-)
>>
>> if CONFIG_VIDEO_MB
>>
>> chip drivers/pci/onboard # Onboard VGA
>> device pci 2.0 on end # VGA (Intel 82830 CGC)
>> register "rom_address" = "0xfff00000"
>> end
>> else
>>
>> device pci 2.0 on end # VGA (Intel 82830 CGC)
>> end
>>
>> But I kept getting build errors. Is it ok to leave the rom stuff
>> with no VGA?
>
> Yes, probably. the setting will be ignored since there is nothing
> there to look at it.
>
> I think you can just leave it all unchanged and build the bios. If you
> don't mind, I'd appreciate it if you could try it.
>
Ok, I will try and report back, then update the wiki page.
Thanks - Joe
More information about the coreboot
mailing list