[coreboot] r3138 build service

[Corey Osgood]

On Thu, Mar 13, 2008 at 10:09 PM, <joe at smittys.pointclark.net> wrote:

> Quoting Uwe Hermann <uwe at hermann-uwe.de>:
>
> > On Thu, Mar 13, 2008 at 04:34:02PM -0400, joe at smittys.pointclark.netwrote:
> >>> Compilation of rca:rm4100 is still broken
> >>> See the error log at
> >>>
> http://qa.coreboot.org/log_buildbrd.php?revision=3138&device=rm4100&vendor=rca
> >>>
> >>>
> >>> If something broke during this checkin please be a pain
> >>> in uwe's neck until the issue is fixed.
> >>>
> >> Why is this failing?? The log looks like there is an error in
> >> rom_stream.c?? And it is in the "normal" directory? But I don't have a
> >> "normal" build just "fallback"?? Could this be one of the changes you
> >> made Uwe?
> >
> > Don't think so. I've seen this before, I just don't remember what the
> > fix was. Will look into it.
> >
> > The symptom is that -DPAYLOAD_SIZE='0x-17000' is passed somewhere, but I
> > haven't yet found out why exactly this happens and what the root cause
> is.
> >
> Yeh that is very strange. According to the log it is happening in the
> beginning, even before romcc.c, and it is the oppasite of
> -DROM_IMAGE_SIZE='0x17000' -DPAYLOAD_SIZE='0x-17000'
>
> Very strange. It built locally just fine for me....
>
> Thanks - Joe


The problem is right here:

from src/rca/rm4100/Config.lb:
if USE_FALLBACK_IMAGE
    default ROM_SECTION_SIZE = FALLBACK_SIZE
    default ROM_SECTION_OFFSET = (ROM_SIZE - FALLBACK_SIZE)
else
    default ROM_SECTION_SIZE = (ROM_SIZE - FALLBACK_SIZE)
    default ROM_SECTION_OFFSET = 0
end
default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE +
ROM_SECTION_OFFSET + 1)
default PAYLOAD_SIZE = (ROM_SECTION_SIZE - ROM_IMAGE_SIZE)

and from src/rca/rm4100/Options.lb:
default ROM_SIZE = 512 * 1024
default ROM_IMAGE_SIZE = 128 * 1024
default HAVE_FALLBACK_BOOT = 1
default FALLBACK_SIZE = 512 * 1024

abuild ignores the target/*/Config.lb and makes its own, with both a normal
and a fallback image. Since the normal image has USE_FALLBACK_IMAGE = 0, it
uses ROM_SECTION_SIZE = (ROM_SIZE - FALLBACK_SIZE), and since they're both
512k, it comes out to 0. PAYLOAD_SIZE is then (0 - ROM_IMAGE_SIZE). There
are two possible fixes, the first to set FALLBACK_SIZE here to 256k and then
set it to ROM_SIZE in target/'s Config.lb, the second to create a
Config-abuild.lb with just the fallback image. I'm leaning towards the
latter, because this system doesn't have a battery-backed CMOS, so it'd
never boot a normal image anyways.

-Corey
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20080314/fe4dde63/attachment.html>