[coreboot] more on the cs5536 and 2.6.25

[ron minnich]

I think 2.6.25 is hanging on the probe of ide port1.

This is 2.6.24

AMD5536: IDE controller (0x1022:0x209a rev 0x01) at  PCI slot 0000:00:0f.2
AMD5536: not 100% native mode: will probe irqs later
AMD5536: 0000:00:0f.2 (rev 01) UDMA100 controller
    ide0: BM-DMA at 0x1ca0-0x1ca7, BIOS settings: hda:pio, hdb:pio
AMD5536: IDE port disabled
hda: CF 1GB, ATA DISK drive
hda: MWDMA2 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 2030112 sectors (1039 MB) w/1KiB Cache, CHS=2014/16/63
 hda: hda1

and 2.6.25

AMD5536: 0000:00:0f.2 (rev 01) UDMA100 controller
AMD5536: IDE controller (0x1022:0x209a rev 0x01) at  PCI slot 0000:00:0f.2
AMD5536: not 100% native mode: will probe irqs later
AMD5536: IDE port disabled
    ide0: BM-DMA at 0x1ca0-0x1ca7, BIOS settings: hda:PIO, hdb:PIO

and on one boot it did this:
Probing IDE interface ide1...

I think it's going after ide1, even though it is not there. Not sure
yet. Something is pretty wrong here, and it broke from 2.6.24 to
2.6.25.

ron