[coreboot] elite C7VCM?

Thomas Vilhar vilhar at hotmail.com
Sun May 11 15:00:42 CEST 2008


hi bari,

flashrom identify it as a VIA VT8237 but its a VIA VT8237R plus(well its atleast written on the chip). The bios chip is identified correctly. 

Here I tried tor copy, verify and write the original bios. Writing fails. 

ys/ thomas

tt:/home/tom # flashrom -r /original.rom
Calibrating delay loop... OK.
No coreboot table found.
Found chipset "VIA VT8237", enabling flash write... OK.
SST49LF040B found at physical address 0xfff80000.
Flash part is SST49LF040B (512 KB).
Reading Flash...done
tt:/home/tom # flashrom -v /original.rom
Calibrating delay loop... OK.
No coreboot table found.
Found chipset "VIA VT8237", enabling flash write... OK.
SST49LF040B found at physical address 0xfff80000.
Flash part is SST49LF040B (512 KB).
Flash image seems to be a legacy BIOS. Disabling checks.
Verifying flash... VERIFIED.
tt:/home/tom # flashrom -w /original.rom
Calibrating delay loop... OK.
No coreboot table found.
Found chipset "VIA VT8237", enabling flash write... OK.
SST49LF040B found at physical address 0xfff80000.
Flash part is SST49LF040B (512 KB).
Flash image seems to be a legacy BIOS. Disabling checks.
ERASE FAILED!


----------------------------------------
> Date: Fri, 9 May 2008 13:40:54 -0500
> From: bari at onelabs.com
> To: vilhar at hotmail.com
> CC: coreboot at coreboot.org
> Subject: Re: [coreboot] elite C7VCM?
> 
> Thomas Vilhar wrote:
>> Flashrom could not erase the chip and on a eites site they mentioned that you need a burner. The board does not have a jumper setting for flashing. I do not mind using a burner or another board.
>>
>> So how about the the files under  coreboot*/src/mainboard/ ? What do I have to do?
>>
>>   
> If you can get on IRC we may be able to help you work your way through 
> flashrom: http://www.coreboot.org/IRC
> 
> Was flashrom able to identify your vt8237r and the SST flash device, but 
> was unable to erase it?
> 
> There will be some additions to the SVN for the epia-cn very soon. It 
> would be simpler for you to modify that code for your board (since it is 
> very similar) and get it working first.
> 
> -Bari

_________________________________________________________________
Connect to the next generation of MSN Messenger 
http://imagine-msn.com/messenger/launch80/default.aspx?locale=en-us&source=wlmailtagline



More information about the coreboot mailing list