[coreboot] Coreboot on Tyan S2892
mylesgw at gmail.com
Thu Nov 20 18:46:38 CET 2008
On Thu, Nov 20, 2008 at 10:24 AM, Anose, Bijoy K (N-Aerotek) <
bijoy.k.anose at lmco.com> wrote:
> Yes, it is busybox-based, and yes, the final kernel is definitely getting
> run, as evidenced by 'uname -a' output at the busybox
> prompt. The file '/dev/sda' does exist.. I don't remember the major/minor
> numbers, etc.
> My .config file is attached. I am not modifying the skeleton/* files.
All right. The only differences I see are that you are building on a 32-bit
machine and you're building a 32-bit LAB image.
Since your kernel gets loaded, I don't see why either of those should
matter. It seems like there's a difference between the way your LAB kernel
and your regular kernel are handling the SATA drive. Since the LAB kernel
finds and reads it, but yours doesn't...
I hope that helps.
> *From:* Myles Watson [mailto:mylesgw at gmail.com]
> *Sent:* Wednesday, November 19, 2008 3:24 PM
> *To:* Anose, Bijoy K (N-Aerotek)
> *Cc:* Ward Vandewege; Coreboot
> *Subject:* Re: [coreboot] Coreboot on Tyan S2892
> On Wed, Nov 19, 2008 at 2:12 PM, Anose, Bijoy K (N-Aerotek) <
> bijoy.k.anose at lmco.com> wrote:
>> I enabled the busybox option and used the default value of "5 second
>> pause to allow access to busybox" but it doesn't
>> pause anywhere, as far as I can tell. Coreboot starts, LAB starts, LAB
>> kexecs the kernel/initrd on the SATA disk, and
>> then at that busybox prompt, I get no output when I issue "fdisk -l
> So your kernel/initrd is busybox-based as well? Is the new kernel really
> getting run?
> I'd start with ls -l /dev/sda or something simple like that.
>> Could you send me a tarball of your buildrom-devel?
> Since it's old I don't think that would be really helpful. Are you
> changing the .config files? Are you changing the skeleton/ files?
>> Something must be different in our config. Also your lab.conf and
>> the kernel/initrd that is on your SATA disk, if that would ok.
> I don't have that machine up right now, so it would take a while. I think
> there's a shorter path to the answer than that.
>> I built my own static kexec and xfer'd it to the SATA drive.
>> Multiple drives shouldn't make any difference -- if the controller can
>> see one drive, it can see them all (if it is actually
>> working properly).
> You're right. If they don't all work it's a bug. Maybe it's been fixed.
> If you're only using two drives, though, it's probably not that.
>> My system may have 2 drives or 8, depending on its function. The one
>> I'm currently experimenting
> with has only 2 installed.
>> (sorry again for top-posting, Outlook is acting differently over
>> VPN/rdesktop for some reason)
>> *From:* Myles Watson [mailto:mylesgw at gmail.com]
>> *Sent:* Wednesday, November 19, 2008 11:19 AM
>> *To:* Anose, Bijoy K (N-Aerotek)
>> *Cc:* Ward Vandewege; Coreboot
>> *Subject:* Re: [coreboot] Coreboot on Tyan S2892
>> On Wed, Nov 19, 2008 at 9:40 AM, Anose, Bijoy K (N-Aerotek) <
>> bijoy.k.anose at lmco.com> wrote:
>>> > From: Ward Vandewege [mailto:ward at gnu.org]
>>> > Sent: Thursday, November 13, 2008 6:56 PM
>>> > To: Anose, Bijoy K (N-Aerotek)
>>> > Cc: Myles Watson; Marc Jones; Coreboot
>>> > Subject: Re: [coreboot] Coreboot on Tyan S2892
>>> > On Thu, Nov 13, 2008 at 07:04:49PM -0500, Anose, Bijoy K
>>> > (N-Aerotek) wrote:
>>> > > > So far it's just me seeing that, on one specific board
>>> > (s2891). So
>>> > > > don't worry about that too much just yet.
>>> > >
>>> > > True, I'll cross that bridge when I get there.
>>> > >
>>> > > First I'll need to be able to boot, period. So far, what
>>> > I've done is
>>> > > this:
>>> > >
>>> > > 1. Subversion checkout of latest buildrom 2. make menuconfig,
>>> > > specifying Tyan S2892, 32-bit LAB 3. make
>>> > >
>>> > > Do I need to do further configuration (Config.lb etc)? I
>>> > thought that
>>> > > the menuconfig took care of everything. Maybe that was wishful
>>> > > thinking..
>>> > It's not. The only other thing you need to do is *pre*pend
>>> > the vga image to the generated image, which will generate an
>>> > image that is exactly 1024KB large, and which you can flash,
>>> > and which *should* just boot your system.
>>> I finally got coreboot+LAB to boot my target kernel/initrd on the SATA
>>> disks (many thanks to Ward)!
>>> However, once the init script in the initrd attempts to assembly the
>>> RAID, it fails because it can't see the SATA disks.
>> How many do you have? Ward has seen a problem with some disk controllers
>> not functioning on the ck804. I've never used more than one.
>>> My guess is that coreboot is originally doing some low level block reads
>>> the disk to load the kernel/initrd but when the final kernel attempts to
>>> do a
>>> SATA read from the disk, the controller has not been fully/properly
>>> and it fails.
>> Have you tried configure the busybox shell to not load automatically, and
>> looked at the SATA drives from there?
>> I assume that whatever modifications that Myles made to successfully
>>> boot from
>>> SATA devices with coreboot+LAB on S2892 have trickled down to buildrom..
>> I used buildrom. I think the multiple drives may be getting you, though.
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the coreboot