[coreboot] v3 updates
Myles Watson
mylesgw at gmail.com
Mon Oct 6 20:06:46 CEST 2008
Ron,
I'd like to help here more, but I don't understand the v3 architecture very
well. I'm looking through the differences between the configuration spaces
of the factory BIOS, v2, and v3.
I also noticed that phase3_scan is null in 8111_ops. Could that be the
problem? Which function should be used to scan this bus? I tried
pci_scan_bridge and pci_domain_scan_bus, but neither Just Worked for me.
Thanks,
Myles
> -----Original Message-----
> From: coreboot-bounces at coreboot.org [mailto:coreboot-bounces at coreboot.org]
> On Behalf Of ron minnich
> Sent: Monday, October 06, 2008 11:19 AM
> To: Coreboot
> Subject: [coreboot] v3 updates
>
> I just pushed a lot of bits across.
>
> The problem with serengeti, if anybody wants to work on it, is that
> the 8111 device is not scanning its subordinate busses. It would be
> great if someone could take a look.
>
> The dbm690t is almost ready for test, once the stage0 fits.It's 23k.
> Help welcome.
>
> ron
>
> --
> coreboot mailing list: coreboot at coreboot.org
> http://www.coreboot.org/mailman/listinfo/coreboot
More information about the coreboot
mailing list