[coreboot] Patch: New board: Bcom WinNET P680

[Uwe Hermann]

On Tue, Oct 14, 2008 at 03:27:04PM -0500, Alex Mauer wrote:
> Index: src/mainboard/bcom/winnetp680/Config.lb
> ===================================================================
> --- src/mainboard/bcom/winnetp680/Config.lb	(revision 3654)
> +++ src/mainboard/bcom/winnetp680/Config.lb	(working copy)
> @@ -99,16 +99,14 @@
>        register "ide1_80pin_cable" = "0"
>        register "fn_ctrl_lo" = "0x80"
>        register "fn_ctrl_hi" = "0x1d"
> -      device pci a.0 on end			# Firewire
> -      device pci f.0 on end			# SATA
> -      device pci f.1 on end			# IDE
> -      device pci 10.0 on end			# OHCI
> -      device pci 10.1 on end			# OHCI
> -      device pci 10.2 on end			# OHCI
> -      device pci 10.3 on end			# OHCI
> +      device pci f.0 on end			# IDE
> +      device pci 10.0 on end			# UHCI
> +      device pci 10.1 on end			# UHCI
> +      device pci 10.2 on end			# UHCI
> +      device pci 10.3 on end			# UHCI
>        device pci 10.4 on end			# EHCI
>        device pci 11.0 on			# Southbridge LPC
> -        chip superio/fintek/f71805f		# Super I/O
> +        chip superio/winbond/w83697hf		# Super I/O
>            device pnp 2e.0 off			# Floppy
>              io 0x60 = 0x3f0
>              irq 0x70 = 6

At least the Super I/O parts are incorrect for the w83697hf, I talked
with Alex on IRC about this, he'll post an updated patch today.


Uwe.
-- 
http://www.hermann-uwe.de  | http://www.holsham-traders.de
http://www.crazy-hacks.org | http://www.unmaintained-free-software.org