[coreboot] Coreboot Support

[Corey Osgood]

On Wed, Oct 29, 2008 at 9:22 AM, Jeffrey Dunbar <jgdunbar at charter.net>wrote:

> I have a Dell Latitude CP M233XT specs
> http://docs.us.dell.com/support/edocs/systems/pmojav/specs.htm


Not currently supported. As of this message, the only supported laptop is an
old revision of the OLPC's XO laptop, it has an embedded controller that
docs are available for. AFAIK, most embedded controllers require you to sign
an NDA to get the docs (if they'll give them to you at all), and an NDA
usually means you can't commit the code back to an open-source project.


>
>
> lspci output
> 00:00.0 Host bridge: Intel Corporation 430TX - 82439 MTXC (rev 01)


Supported in v1, could be ported to v2


>
> 00:01.0 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 01)
> 00:01.1 IDE Interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
> 00:01.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01)
> 00:01.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 01)


Should be supported in v2, not in v3 (yet).


>
> 00:02.0 VGA compatible controller: Neomagic Corporation NM2160 [MagicGraph
> 128XD]
> 00:03.0 CardBus Bridge: Texas Instruments PCI1131 (rev 01)
> 00:03.1 CardBus Bridge: Texas Instruments PCI1131 (rev 01)
>
> I would like to run both windows and linux if possible


That could be a problem, I'm not sure the current status of ADLO. Linux
should boot fine, once the hardware's initialized.

-Corey
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20081029/1680b63f/attachment.html>