[coreboot] r226 - in buildrom-devel: config/payloads config/platforms packages/filo packages/filo/conf
svn at coreboot.org
svn at coreboot.org
Fri Sep 12 19:18:00 CEST 2008
Author: jcrouse
Date: 2008-09-12 19:18:00 +0200 (Fri, 12 Sep 2008)
New Revision: 226
Removed:
buildrom-devel/packages/filo/conf/alix1c-Config
buildrom-devel/packages/filo/conf/alix2c3-Config
buildrom-devel/packages/filo/conf/asus_a8v-e_se-Config
buildrom-devel/packages/filo/conf/db800-Config
buildrom-devel/packages/filo/conf/ga-2761gxdk-Config
buildrom-devel/packages/filo/conf/m57sli-Config
buildrom-devel/packages/filo/conf/msm800sev-Config
buildrom-devel/packages/filo/conf/norwich-Config
buildrom-devel/packages/filo/conf/qemu-Config
buildrom-devel/packages/filo/conf/serengeti_cheetah-Config
buildrom-devel/packages/filo/conf/supermicro-h8dmr-Config
buildrom-devel/packages/filo/conf/tyan-generic-Config
buildrom-devel/packages/filo/conf/tyan-s2881-Config
buildrom-devel/packages/filo/conf/tyan-s2882-Config
buildrom-devel/packages/filo/conf/tyan-s2891-Config
Modified:
buildrom-devel/config/payloads/payloads.conf
buildrom-devel/config/platforms/alix1c.conf
buildrom-devel/config/platforms/asus_a8v-e_se.conf
buildrom-devel/config/platforms/db800.conf
buildrom-devel/config/platforms/dbe61.conf
buildrom-devel/config/platforms/ga-2761gxdk.conf
buildrom-devel/config/platforms/m57sli.conf
buildrom-devel/config/platforms/msm800sev.conf
buildrom-devel/config/platforms/norwich.conf
buildrom-devel/config/platforms/qemu.conf
buildrom-devel/config/platforms/serengeti_cheetah.conf
buildrom-devel/config/platforms/supermicro-h8dmr.conf
buildrom-devel/config/platforms/tyan-s2881.conf
buildrom-devel/config/platforms/tyan-s2882.conf
buildrom-devel/config/platforms/tyan-s2891.conf
buildrom-devel/config/platforms/tyan-s2892.conf
buildrom-devel/config/platforms/tyan-s2895.conf
buildrom-devel/packages/filo/filo.mk
Log:
[PATCH] libpayload: Update FILO to the trunk
Update FILO to build from the trunk - we will use the
default configuration for all platforms (for now), so
remove the previous configurations and infrastructure.
Signed-off-by: Jordan Crouse <jordan.crouse at amd.com>
Acked-by: Stefan Reinauer <stepan at coresystems.de>
Modified: buildrom-devel/config/payloads/payloads.conf
===================================================================
--- buildrom-devel/config/payloads/payloads.conf 2008-09-11 19:04:33 UTC (rev 225)
+++ buildrom-devel/config/payloads/payloads.conf 2008-09-12 17:18:00 UTC (rev 226)
@@ -41,6 +41,7 @@
PCONF-$(CONFIG_PAYLOAD_OFW) = ofw.conf
PCONF-$(CONFIG_PAYLOAD_OPENBIOS) = openbios.conf
PCONF-$(CONFIG_PAYLOAD_TINT) = libpayload-dep.conf
+PCONF-$(CONFIG_PAYLOAD_FILO) = libpayload-dep.conf
include $(CONFIG_DIR)/payloads/$(PCONF-y)
Modified: buildrom-devel/config/platforms/alix1c.conf
===================================================================
--- buildrom-devel/config/platforms/alix1c.conf 2008-09-11 19:04:33 UTC (rev 225)
+++ buildrom-devel/config/platforms/alix1c.conf 2008-09-12 17:18:00 UTC (rev 226)
@@ -22,8 +22,3 @@
CBV2_TAG=3335
CBV3_TAG=682
-
-# FILO configuration
-
-FILO_CONFIG=alix1c-Config
-
Modified: buildrom-devel/config/platforms/asus_a8v-e_se.conf
===================================================================
--- buildrom-devel/config/platforms/asus_a8v-e_se.conf 2008-09-11 19:04:33 UTC (rev 225)
+++ buildrom-devel/config/platforms/asus_a8v-e_se.conf 2008-09-12 17:18:00 UTC (rev 226)
@@ -33,8 +33,3 @@
COREBOOT_BOARD=a8v-e_se
CBV2_TDIR=asus_a8v-e_se
CBV2_TAG=3241
-
-# FILO configuration
-
-FILO_CONFIG=asus_a8v-e_se-Config
-
Modified: buildrom-devel/config/platforms/db800.conf
===================================================================
--- buildrom-devel/config/platforms/db800.conf 2008-09-11 19:04:33 UTC (rev 225)
+++ buildrom-devel/config/platforms/db800.conf 2008-09-12 17:18:00 UTC (rev 226)
@@ -22,9 +22,3 @@
COREBOOT_BOARD=db800
CBV2_TDIR=db800
CBV2_TAG=3335
-
-# FILO configuration
-# Use a new FILO config for the DB800 to autoload an image
-
-FILO_CONFIG=db800-Config
-
Modified: buildrom-devel/config/platforms/dbe61.conf
===================================================================
--- buildrom-devel/config/platforms/dbe61.conf 2008-09-11 19:04:33 UTC (rev 225)
+++ buildrom-devel/config/platforms/dbe61.conf 2008-09-12 17:18:00 UTC (rev 226)
@@ -22,8 +22,3 @@
COREBOOT_BOARD=dbe61
CBV2_TDIR=dbe61
CBV2_TAG=3335
-
-# FILO configuration
-
-FILO_CONFIG=norwich-Config
-
Modified: buildrom-devel/config/platforms/ga-2761gxdk.conf
===================================================================
--- buildrom-devel/config/platforms/ga-2761gxdk.conf 2008-09-11 19:04:33 UTC (rev 225)
+++ buildrom-devel/config/platforms/ga-2761gxdk.conf 2008-09-12 17:18:00 UTC (rev 226)
@@ -26,8 +26,3 @@
COREBOOT_BOARD=ga_2761gxdk
CBV2_TDIR=ga_2761gxdk
CBV2_TAG=3335
-
-# FILO configuration
-
-FILO_CONFIG=ga-2761gxdk-Config
-
Modified: buildrom-devel/config/platforms/m57sli.conf
===================================================================
--- buildrom-devel/config/platforms/m57sli.conf 2008-09-11 19:04:33 UTC (rev 225)
+++ buildrom-devel/config/platforms/m57sli.conf 2008-09-12 17:18:00 UTC (rev 226)
@@ -31,8 +31,3 @@
COREBOOT_BOARD=m57sli
CBV2_TDIR=m57sli
CBV2_TAG=3381
-
-# FILO configuration
-
-FILO_CONFIG=m57sli-Config
-
Modified: buildrom-devel/config/platforms/msm800sev.conf
===================================================================
--- buildrom-devel/config/platforms/msm800sev.conf 2008-09-11 19:04:33 UTC (rev 225)
+++ buildrom-devel/config/platforms/msm800sev.conf 2008-09-12 17:18:00 UTC (rev 226)
@@ -21,8 +21,3 @@
COREBOOT_BOARD=msm800sev
CBV2_TDIR=msm800sev
CBV2_TAG=3335
-
-# FILO configuration
-
-FILO_CONFIG=msm800sev-Config
-
Modified: buildrom-devel/config/platforms/norwich.conf
===================================================================
--- buildrom-devel/config/platforms/norwich.conf 2008-09-11 19:04:33 UTC (rev 225)
+++ buildrom-devel/config/platforms/norwich.conf 2008-09-12 17:18:00 UTC (rev 226)
@@ -21,8 +21,3 @@
COREBOOT_BOARD=norwich
CBV2_TDIR=norwich
CBV2_TAG=3294
-
-# FILO configuration
-
-FILO_CONFIG=norwich-Config
-
Modified: buildrom-devel/config/platforms/qemu.conf
===================================================================
--- buildrom-devel/config/platforms/qemu.conf 2008-09-11 19:04:33 UTC (rev 225)
+++ buildrom-devel/config/platforms/qemu.conf 2008-09-12 17:18:00 UTC (rev 226)
@@ -23,8 +23,3 @@
COREBOOT_VENDOR=emulation
COREBOOT_BOARD=qemu-x86
-
-# FILO configuration
-
-FILO_CONFIG=qemu-Config
-
Modified: buildrom-devel/config/platforms/serengeti_cheetah.conf
===================================================================
--- buildrom-devel/config/platforms/serengeti_cheetah.conf 2008-09-11 19:04:33 UTC (rev 225)
+++ buildrom-devel/config/platforms/serengeti_cheetah.conf 2008-09-12 17:18:00 UTC (rev 226)
@@ -46,8 +46,3 @@
CBV2_TDIR=serengeti_cheetah
CBV2_TAG=3343
endif
-
-# FILO configuration
-
-FILO_CONFIG=serengeti_cheetah-Config
-
Modified: buildrom-devel/config/platforms/supermicro-h8dmr.conf
===================================================================
--- buildrom-devel/config/platforms/supermicro-h8dmr.conf 2008-09-11 19:04:33 UTC (rev 225)
+++ buildrom-devel/config/platforms/supermicro-h8dmr.conf 2008-09-12 17:18:00 UTC (rev 226)
@@ -31,8 +31,3 @@
COREBOOT_BOARD=h8dmr
CBV2_TDIR=h8dmr
CBV2_TAG=3278
-
-# FILO configuration
-
-FILO_CONFIG=supermicro-h8dmr-Config
-
Modified: buildrom-devel/config/platforms/tyan-s2881.conf
===================================================================
--- buildrom-devel/config/platforms/tyan-s2881.conf 2008-09-11 19:04:33 UTC (rev 225)
+++ buildrom-devel/config/platforms/tyan-s2881.conf 2008-09-12 17:18:00 UTC (rev 226)
@@ -31,8 +31,3 @@
COREBOOT_BOARD=s2881
CBV2_TDIR=s2881
CBV2_TAG=3131
-
-# FILO configuration
-
-FILO_CONFIG=tyan-s2881-Config
-
Modified: buildrom-devel/config/platforms/tyan-s2882.conf
===================================================================
--- buildrom-devel/config/platforms/tyan-s2882.conf 2008-09-11 19:04:33 UTC (rev 225)
+++ buildrom-devel/config/platforms/tyan-s2882.conf 2008-09-12 17:18:00 UTC (rev 226)
@@ -31,8 +31,3 @@
COREBOOT_BOARD=s2882
CBV2_TDIR=s2882
CBV2_TAG=3114
-
-# FILO configuration
-
-FILO_CONFIG=tyan-s2882-Config
-
Modified: buildrom-devel/config/platforms/tyan-s2891.conf
===================================================================
--- buildrom-devel/config/platforms/tyan-s2891.conf 2008-09-11 19:04:33 UTC (rev 225)
+++ buildrom-devel/config/platforms/tyan-s2891.conf 2008-09-12 17:18:00 UTC (rev 226)
@@ -31,8 +31,3 @@
COREBOOT_BOARD=s2891
CBV2_TDIR=s2891
CBV2_TAG=3259
-
-# FILO configuration
-
-FILO_CONFIG=tyan-s2891-Config
-
Modified: buildrom-devel/config/platforms/tyan-s2892.conf
===================================================================
--- buildrom-devel/config/platforms/tyan-s2892.conf 2008-09-11 19:04:33 UTC (rev 225)
+++ buildrom-devel/config/platforms/tyan-s2892.conf 2008-09-12 17:18:00 UTC (rev 226)
@@ -29,8 +29,3 @@
COREBOOT_BOARD=s2892
CBV2_TDIR=s2892
CBV2_TAG=3259
-
-# FILO configuration
-
-FILO_CONFIG=tyan-generic-Config
-
Modified: buildrom-devel/config/platforms/tyan-s2895.conf
===================================================================
--- buildrom-devel/config/platforms/tyan-s2895.conf 2008-09-11 19:04:33 UTC (rev 225)
+++ buildrom-devel/config/platforms/tyan-s2895.conf 2008-09-12 17:18:00 UTC (rev 226)
@@ -29,8 +29,3 @@
COREBOOT_BOARD=s2895
CBV2_TDIR=s2895
CBV2_TAG=3259
-
-# FILO configuration
-
-FILO_CONFIG=tyan-generic-Config
-
Deleted: buildrom-devel/packages/filo/conf/alix1c-Config
===================================================================
--- buildrom-devel/packages/filo/conf/alix1c-Config 2008-09-11 19:04:33 UTC (rev 225)
+++ buildrom-devel/packages/filo/conf/alix1c-Config 2008-09-12 17:18:00 UTC (rev 226)
@@ -1,50 +0,0 @@
-# Use grub instead of autoboot?
-USE_GRUB = 1
-# Grub menu.lst path
-MENULST_FILE = "hda1:/boot/grub/menu.lst"
-# Driver for hard disk, CompactFlash, and CD-ROM on IDE bus
-IDE_DISK = 1
-# Add a short delay when polling status registers
-# (required on some broken SATA controllers)
-IDE_DISK_POLL_DELAY = 1
-# Driver for USB Storage
-USB_DISK = 1
-# VGA text console
-VGA_CONSOLE = 1
-PC_KEYBOARD = 1
-# Enable the serial console
-SERIAL_CONSOLE = 1
-# Serial console; real external serial port
-SERIAL_IOBASE = 0x3f8
-SERIAL_SPEED = 115200
-# Filesystems
-FSYS_EXT2FS = 1
-FSYS_ISO9660 = 1
-# Support for boot disk image in bootable CD-ROM (El Torito)
-ELTORITO = 1
-# PCI support
-SUPPORT_PCI = 1
-# Enable this to scan PCI busses above bus 0
-# AMD64 based boards do need this.
-PCI_BRUTE_SCAN = 1
-# Loader for standard Linux kernel image, a.k.a. /vmlinuz
-LINUX_LOADER = 1
-
-# Debugging
-#DEBUG_ALL = 1
-#DEBUG_ELFBOOT = 1
-#DEBUG_ELFNOTE = 1
-#DEBUG_LINUXBIOS = 1
-#DEBUG_MALLOC = 1
-#DEBUG_MULTIBOOT = 1
-#DEBUG_SEGMENT = 1
-#DEBUG_SYS_INFO = 1
-#DEBUG_TIMER = 1
-#DEBUG_BLOCKDEV = 1
-#DEBUG_PCI = 1
-#DEBUG_VIA_SOUND = 1
-#DEBUG_LINUXLOAD = 1
-#DEBUG_IDE = 1
-#DEBUG_USB = 1
-#DEBUG_ELTORITO = 1
-
Deleted: buildrom-devel/packages/filo/conf/alix2c3-Config
===================================================================
--- buildrom-devel/packages/filo/conf/alix2c3-Config 2008-09-11 19:04:33 UTC (rev 225)
+++ buildrom-devel/packages/filo/conf/alix2c3-Config 2008-09-12 17:18:00 UTC (rev 226)
@@ -1,16 +0,0 @@
-USE_GRUB = 1
-MENULST_FILE = "hda1:/boot/grub/menu.lst"
-IDE_DISK = 1
-IDE_DISK_POLL_DELAY = 1
-USB_DISK = 1
-VGA_CONSOLE = 1
-PC_KEYBOARD = 1
-SERIAL_CONSOLE = 1
-SERIAL_IOBASE = 0x3f8
-SERIAL_SPEED = 115200
-FSYS_EXT2FS = 1
-FSYS_ISO9660 = 1
-ELTORITO = 1
-SUPPORT_PCI = 1
-PCI_BRUTE_SCAN = 1
-LINUX_LOADER = 1
Deleted: buildrom-devel/packages/filo/conf/asus_a8v-e_se-Config
===================================================================
--- buildrom-devel/packages/filo/conf/asus_a8v-e_se-Config 2008-09-11 19:04:33 UTC (rev 225)
+++ buildrom-devel/packages/filo/conf/asus_a8v-e_se-Config 2008-09-12 17:18:00 UTC (rev 226)
@@ -1,17 +0,0 @@
-USE_GRUB = 1
-MENULST_FILE = "hda2:/boot/grub/menu.lst"
-IDE_DISK = 1
-IDE_DISK_POLL_DELAY = 1
-SLOW_SATA = 1
-USB_DISK = 1
-VGA_CONSOLE = 1
-PC_KEYBOARD = 1
-SERIAL_CONSOLE = 1
-SERIAL_IOBASE = 0x3f8
-SERIAL_SPEED = 115200
-FSYS_EXT2FS = 1
-FSYS_ISO9660 = 1
-ELTORITO = 1
-SUPPORT_PCI = 1
-PCI_BRUTE_SCAN = 1
-LINUX_LOADER = 1
Deleted: buildrom-devel/packages/filo/conf/db800-Config
===================================================================
--- buildrom-devel/packages/filo/conf/db800-Config 2008-09-11 19:04:33 UTC (rev 225)
+++ buildrom-devel/packages/filo/conf/db800-Config 2008-09-12 17:18:00 UTC (rev 226)
@@ -1,101 +0,0 @@
-# !!! NOTE !!!
-# Do NOT add spaces or comments at the end of option lines.
-# It confuses some versions of make.
-
-# Use grub instead of autoboot?
-USE_GRUB = 1
-
-# Grub menu.lst path
-MENULST_FILE = "hda1:/boot/menu.lst"
-# Via Epia-MII CF boot:
-#MENULST_FILE = "hde1:/boot/filo/menu.lst"
-
-# time before default menu.lst is chosen. Set to 0 to ignore
-MENULST_TIMEOUT = 10
-
-# Image filename for automatic boot and optional command line parameter
-AUTOBOOT_FILE = "hda1:/vmlinuz root=/dev/hda1 console=tty0 console=ttyS0,115200"
-#AUTOBOOT_FILE = "mem at 0xfff80000"
-#AUTOBOOT_FILE = "hde1 at 0"
-#AUTOBOOT_FILE = "uda1:/vmlinuz.elf"
-
-# Time in second before booting AUTOBOOT_FILE
-AUTOBOOT_DELAY = 2
-
-# Driver for hard disk, CompactFlash, and CD-ROM on IDE bus
-IDE_DISK = 1
-
-# Add a short delay when polling status registers
-# (required on some broken SATA controllers)
-# NOTE: Slows down access significantly, so disable
-# whenever possible.
-#IDE_DISK_POLL_DELAY = 1
-
-# Use PCMCIA compact flash on Via Epia MII10000 and MII6000E
-# This device is referred to as hde.
-#PCMCIA_CF = 1
-
-# Driver for USB Storage
-# USB_DISK = 1
-
-# VGA text console
-# VGA_CONSOLE = 1
-# PC_KEYBOARD = 1
-
-# Serial console
-SERIAL_CONSOLE = 1
-SERIAL_IOBASE = 0x3f8
-# if SERIAL_SPEED is commented out, the speed will not be changed.
-#SERIAL_SPEED = 115200
-
-# Filesystems
-FSYS_EXT2FS = 1
-FSYS_FAT = 1
-#FSYS_JFS = 1
-#FSYS_MINIX = 1
-FSYS_REISERFS = 1
-#FSYS_XFS = 1
-FSYS_ISO9660 = 1
-
-# Support for boot disk image in bootable CD-ROM (El Torito)
-ELTORITO = 1
-
-# PCI support
-SUPPORT_PCI = 1
-
-# Enable this to scan PCI busses above bus 0
-# AMD64 based boards do need this.
-PCI_BRUTE_SCAN = 1
-
-# Sound support (needs SUPPORT_PCI)
-#SUPPORT_SOUND = 1
-
-# Sound drivers
-#VIA_SOUND = 1
-
-# Debugging
-#DEBUG_ALL = 1
-#DEBUG_ELFBOOT = 1
-#DEBUG_ELFNOTE = 1
-#DEBUG_LINUXBIOS = 1
-#DEBUG_MALLOC = 1
-#DEBUG_MULTIBOOT = 1
-#DEBUG_SEGMENT = 1
-#DEBUG_SYS_INFO = 1
-#DEBUG_TIMER = 1
-#DEBUG_BLOCKDEV = 1
-#DEBUG_PCI = 1
-#DEBUG_VIA_SOUND = 1
-#DEBUG_LINUXLOAD = 1
-#DEBUG_IDE = 1
-#DEBUG_USB = 1
-#DEBUG_ELTORITO = 1
-
-# i386 options
-
-# Loader for standard Linux kernel image, a.k.a. /vmlinuz
-LINUX_LOADER = 1
-
-# Boot FILO from Multiboot loader (eg. GRUB)
-#MULTIBOOT_IMAGE = 1
-
Deleted: buildrom-devel/packages/filo/conf/ga-2761gxdk-Config
===================================================================
--- buildrom-devel/packages/filo/conf/ga-2761gxdk-Config 2008-09-11 19:04:33 UTC (rev 225)
+++ buildrom-devel/packages/filo/conf/ga-2761gxdk-Config 2008-09-12 17:18:00 UTC (rev 226)
@@ -1,50 +0,0 @@
-# Use grub instead of autoboot?
-USE_GRUB = 1
-# Grub menu.lst path
-MENULST_FILE = "hde1:/boot/grub/menu.lst"
-# Driver for hard disk, CompactFlash, and CD-ROM on IDE bus
-IDE_DISK = 1
-# Add a short delay when polling status registers
-# (required on some broken SATA controllers)
-IDE_DISK_POLL_DELAY = 1
-# Driver for USB Storage
-USB_DISK = 1
-# VGA text console
-VGA_CONSOLE = 1
-PC_KEYBOARD = 1
-# Enable the serial console
-SERIAL_CONSOLE = 1
-# Serial console; real external serial port
-SERIAL_IOBASE = 0x3f8
-SERIAL_SPEED = 115200
-# Filesystems
-FSYS_EXT2FS = 1
-FSYS_ISO9660 = 1
-# Support for boot disk image in bootable CD-ROM (El Torito)
-ELTORITO = 1
-# PCI support
-SUPPORT_PCI = 1
-# Enable this to scan PCI busses above bus 0
-# AMD64 based boards do need this.
-PCI_BRUTE_SCAN = 1
-# Loader for standard Linux kernel image, a.k.a. /vmlinuz
-LINUX_LOADER = 1
-
-# Debugging
-#DEBUG_ALL = 1
-#DEBUG_ELFBOOT = 1
-#DEBUG_ELFNOTE = 1
-#DEBUG_LINUXBIOS = 1
-#DEBUG_MALLOC = 1
-#DEBUG_MULTIBOOT = 1
-#DEBUG_SEGMENT = 1
-#DEBUG_SYS_INFO = 1
-#DEBUG_TIMER = 1
-#DEBUG_BLOCKDEV = 1
-#DEBUG_PCI = 1
-#DEBUG_VIA_SOUND = 1
-#DEBUG_LINUXLOAD = 1
-#DEBUG_IDE = 1
-#DEBUG_USB = 1
-#DEBUG_ELTORITO = 1
-
Deleted: buildrom-devel/packages/filo/conf/m57sli-Config
===================================================================
--- buildrom-devel/packages/filo/conf/m57sli-Config 2008-09-11 19:04:33 UTC (rev 225)
+++ buildrom-devel/packages/filo/conf/m57sli-Config 2008-09-12 17:18:00 UTC (rev 226)
@@ -1,52 +0,0 @@
-# Use grub instead of autoboot?
-USE_GRUB = 1
-# Grub menu.lst path
-MENULST_FILE = "hde1:/boot/grub/menu.lst"
-# Driver for hard disk, CompactFlash, and CD-ROM on IDE bus
-IDE_DISK = 1
-# Add a short delay when polling status registers
-# (required on some broken SATA controllers)
-IDE_DISK_POLL_DELAY = 1
-# Wait 5 seconds to allow the sata disks to spin up
-SLOW_SATA = 1
-# Driver for USB Storage
-USB_DISK = 1
-# VGA text console
-VGA_CONSOLE = 1
-PC_KEYBOARD = 1
-# Enable the serial console
-SERIAL_CONSOLE = 1
-# Serial console; real external serial port
-SERIAL_IOBASE = 0x3f8
-SERIAL_SPEED = 115200
-# Filesystems
-FSYS_EXT2FS = 1
-FSYS_ISO9660 = 1
-# Support for boot disk image in bootable CD-ROM (El Torito)
-ELTORITO = 1
-# PCI support
-SUPPORT_PCI = 1
-# Enable this to scan PCI busses above bus 0
-# AMD64 based boards do need this.
-PCI_BRUTE_SCAN = 1
-# Loader for standard Linux kernel image, a.k.a. /vmlinuz
-LINUX_LOADER = 1
-
-# Debugging
-#DEBUG_ALL = 1
-#DEBUG_ELFBOOT = 1
-#DEBUG_ELFNOTE = 1
-#DEBUG_LINUXBIOS = 1
-#DEBUG_MALLOC = 1
-#DEBUG_MULTIBOOT = 1
-#DEBUG_SEGMENT = 1
-#DEBUG_SYS_INFO = 1
-#DEBUG_TIMER = 1
-#DEBUG_BLOCKDEV = 1
-#DEBUG_PCI = 1
-#DEBUG_VIA_SOUND = 1
-#DEBUG_LINUXLOAD = 1
-#DEBUG_IDE = 1
-#DEBUG_USB = 1
-#DEBUG_ELTORITO = 1
-
Deleted: buildrom-devel/packages/filo/conf/msm800sev-Config
===================================================================
--- buildrom-devel/packages/filo/conf/msm800sev-Config 2008-09-11 19:04:33 UTC (rev 225)
+++ buildrom-devel/packages/filo/conf/msm800sev-Config 2008-09-12 17:18:00 UTC (rev 226)
@@ -1,101 +0,0 @@
-# !!! NOTE !!!
-# Do NOT add spaces or comments at the end of option lines.
-# It confuses some versions of make.
-
-# Use grub instead of autoboot?
-USE_GRUB = 1
-
-# Grub menu.lst path
-MENULST_FILE = "hda2:/boot/menu.lst"
-# Via Epia-MII CF boot:
-#MENULST_FILE = "hde1:/boot/filo/menu.lst"
-
-# time before default menu.lst is chosen. Set to 0 to ignore
-MENULST_TIMEOUT = 0
-
-# Image filename for automatic boot and optional command line parameter
-AUTOBOOT_FILE = "hda1:/vmlinuz root=/dev/hda1 console=tty0 console=ttyS0,115200"
-#AUTOBOOT_FILE = "mem at 0xfff80000"
-#AUTOBOOT_FILE = "hde1 at 0"
-#AUTOBOOT_FILE = "uda1:/vmlinuz.elf"
-
-# Time in second before booting AUTOBOOT_FILE
-AUTOBOOT_DELAY = 2
-
-# Driver for hard disk, CompactFlash, and CD-ROM on IDE bus
-IDE_DISK = 1
-
-# Add a short delay when polling status registers
-# (required on some broken SATA controllers)
-# NOTE: Slows down access significantly, so disable
-# whenever possible.
-#IDE_DISK_POLL_DELAY = 1
-
-# Use PCMCIA compact flash on Via Epia MII10000 and MII6000E
-# This device is referred to as hde.
-#PCMCIA_CF = 1
-
-# Driver for USB Storage
-# USB_DISK = 1
-
-# VGA text console
-# VGA_CONSOLE = 1
-# PC_KEYBOARD = 1
-
-# Serial console
-SERIAL_CONSOLE = 1
-SERIAL_IOBASE = 0x3f8
-# if SERIAL_SPEED is commented out, the speed will not be changed.
-#SERIAL_SPEED = 115200
-
-# Filesystems
-FSYS_EXT2FS = 1
-FSYS_FAT = 1
-#FSYS_JFS = 1
-#FSYS_MINIX = 1
-FSYS_REISERFS = 1
-#FSYS_XFS = 1
-FSYS_ISO9660 = 1
-
-# Support for boot disk image in bootable CD-ROM (El Torito)
-ELTORITO = 1
-
-# PCI support
-SUPPORT_PCI = 1
-
-# Enable this to scan PCI busses above bus 0
-# AMD64 based boards do need this.
-PCI_BRUTE_SCAN = 1
-
-# Sound support (needs SUPPORT_PCI)
-#SUPPORT_SOUND = 1
-
-# Sound drivers
-#VIA_SOUND = 1
-
-# Debugging
-#DEBUG_ALL = 1
-#DEBUG_ELFBOOT = 1
-#DEBUG_ELFNOTE = 1
-#DEBUG_LINUXBIOS = 1
-#DEBUG_MALLOC = 1
-#DEBUG_MULTIBOOT = 1
-#DEBUG_SEGMENT = 1
-#DEBUG_SYS_INFO = 1
-#DEBUG_TIMER = 1
-#DEBUG_BLOCKDEV = 1
-#DEBUG_PCI = 1
-#DEBUG_VIA_SOUND = 1
-#DEBUG_LINUXLOAD = 1
-#DEBUG_IDE = 1
-#DEBUG_USB = 1
-#DEBUG_ELTORITO = 1
-
-# i386 options
-
-# Loader for standard Linux kernel image, a.k.a. /vmlinuz
-LINUX_LOADER = 1
-
-# Boot FILO from Multiboot loader (eg. GRUB)
-#MULTIBOOT_IMAGE = 1
-
Deleted: buildrom-devel/packages/filo/conf/norwich-Config
===================================================================
--- buildrom-devel/packages/filo/conf/norwich-Config 2008-09-11 19:04:33 UTC (rev 225)
+++ buildrom-devel/packages/filo/conf/norwich-Config 2008-09-12 17:18:00 UTC (rev 226)
@@ -1,101 +0,0 @@
-# !!! NOTE !!!
-# Do NOT add spaces or comments at the end of option lines.
-# It confuses some versions of make.
-
-# Use grub instead of autoboot?
-USE_GRUB = 1
-
-# Grub menu.lst path
-MENULST_FILE = "hda2:/boot/menu.lst"
-# Via Epia-MII CF boot:
-#MENULST_FILE = "hde1:/boot/filo/menu.lst"
-
-# time before default menu.lst is chosen. Set to 0 to ignore
-MENULST_TIMEOUT = 0
-
-# Image filename for automatic boot and optional command line parameter
-AUTOBOOT_FILE = "hda1:/vmlinuz root=/dev/hda1 console=tty0 console=ttyS0,115200"
-#AUTOBOOT_FILE = "mem at 0xfff80000"
-#AUTOBOOT_FILE = "hde1 at 0"
-#AUTOBOOT_FILE = "uda1:/vmlinuz.elf"
-
-# Time in second before booting AUTOBOOT_FILE
-AUTOBOOT_DELAY = 2
-
-# Driver for hard disk, CompactFlash, and CD-ROM on IDE bus
-IDE_DISK = 1
-
-# Add a short delay when polling status registers
-# (required on some broken SATA controllers)
-# NOTE: Slows down access significantly, so disable
-# whenever possible.
-#IDE_DISK_POLL_DELAY = 1
-
-# Use PCMCIA compact flash on Via Epia MII10000 and MII6000E
-# This device is referred to as hde.
-#PCMCIA_CF = 1
-
-# Driver for USB Storage
-# USB_DISK = 1
-
-# VGA text console
-# VGA_CONSOLE = 1
-# PC_KEYBOARD = 1
-
-# Serial console
-SERIAL_CONSOLE = 1
-SERIAL_IOBASE = 0x3f8
-# if SERIAL_SPEED is commented out, the speed will not be changed.
-#SERIAL_SPEED = 115200
-
-# Filesystems
-FSYS_EXT2FS = 1
-FSYS_FAT = 1
-#FSYS_JFS = 1
-#FSYS_MINIX = 1
-FSYS_REISERFS = 1
-#FSYS_XFS = 1
-FSYS_ISO9660 = 1
-
-# Support for boot disk image in bootable CD-ROM (El Torito)
-ELTORITO = 1
-
-# PCI support
-SUPPORT_PCI = 1
-
-# Enable this to scan PCI busses above bus 0
-# AMD64 based boards do need this.
-PCI_BRUTE_SCAN = 1
-
-# Sound support (needs SUPPORT_PCI)
-#SUPPORT_SOUND = 1
-
-# Sound drivers
-#VIA_SOUND = 1
-
-# Debugging
-#DEBUG_ALL = 1
-#DEBUG_ELFBOOT = 1
-#DEBUG_ELFNOTE = 1
-#DEBUG_LINUXBIOS = 1
-#DEBUG_MALLOC = 1
-#DEBUG_MULTIBOOT = 1
-#DEBUG_SEGMENT = 1
-#DEBUG_SYS_INFO = 1
-#DEBUG_TIMER = 1
-#DEBUG_BLOCKDEV = 1
-#DEBUG_PCI = 1
-#DEBUG_VIA_SOUND = 1
-#DEBUG_LINUXLOAD = 1
-#DEBUG_IDE = 1
-#DEBUG_USB = 1
-#DEBUG_ELTORITO = 1
-
-# i386 options
-
-# Loader for standard Linux kernel image, a.k.a. /vmlinuz
-LINUX_LOADER = 1
-
-# Boot FILO from Multiboot loader (eg. GRUB)
-#MULTIBOOT_IMAGE = 1
-
Deleted: buildrom-devel/packages/filo/conf/qemu-Config
===================================================================
--- buildrom-devel/packages/filo/conf/qemu-Config 2008-09-11 19:04:33 UTC (rev 225)
+++ buildrom-devel/packages/filo/conf/qemu-Config 2008-09-12 17:18:00 UTC (rev 226)
@@ -1,101 +0,0 @@
-# !!! NOTE !!!
-# Do NOT add spaces or comments at the end of option lines.
-# It confuses some versions of make.
-
-# Use grub instead of autoboot?
-USE_GRUB = 1
-
-# Grub menu.lst path
-MENULST_FILE = "hda3:/boot/filo/menu.lst"
-# Via Epia-MII CF boot:
-#MENULST_FILE = "hde1:/boot/filo/menu.lst"
-
-# time before default menu.lst is chosen. Set to 0 to ignore
-MENULST_TIMEOUT = 0
-
-# Image filename for automatic boot and optional command line parameter
-AUTOBOOT_FILE = "hda1:/vmlinuz root=/dev/hda1 console=tty0 console=ttyS0,115200"
-#AUTOBOOT_FILE = "mem at 0xfff80000"
-#AUTOBOOT_FILE = "hde1 at 0"
-#AUTOBOOT_FILE = "uda1:/vmlinuz.elf"
-
-# Time in second before booting AUTOBOOT_FILE
-AUTOBOOT_DELAY = 2
-
-# Driver for hard disk, CompactFlash, and CD-ROM on IDE bus
-IDE_DISK = 1
-
-# Add a short delay when polling status registers
-# (required on some broken SATA controllers)
-# NOTE: Slows down access significantly, so disable
-# whenever possible.
-#IDE_DISK_POLL_DELAY = 1
-
-# Use PCMCIA compact flash on Via Epia MII10000 and MII6000E
-# This device is referred to as hde.
-#PCMCIA_CF = 1
-
-# Driver for USB Storage
-USB_DISK = 1
-
-# VGA text console
-VGA_CONSOLE = 1
-PC_KEYBOARD = 1
-
-# Serial console
-SERIAL_CONSOLE = 1
-SERIAL_IOBASE = 0x3f8
-# if SERIAL_SPEED is commented out, the speed will not be changed.
-#SERIAL_SPEED = 115200
-
-# Filesystems
-FSYS_EXT2FS = 1
-FSYS_FAT = 1
-#FSYS_JFS = 1
-#FSYS_MINIX = 1
-FSYS_REISERFS = 1
-#FSYS_XFS = 1
-FSYS_ISO9660 = 1
-
-# Support for boot disk image in bootable CD-ROM (El Torito)
-ELTORITO = 1
-
-# PCI support
-SUPPORT_PCI = 1
-
-# Enable this to scan PCI busses above bus 0
-# AMD64 based boards do need this.
-PCI_BRUTE_SCAN = 1
-
-# Sound support (needs SUPPORT_PCI)
-#SUPPORT_SOUND = 1
-
-# Sound drivers
-#VIA_SOUND = 1
-
-# Debugging
-#DEBUG_ALL = 1
-#DEBUG_ELFBOOT = 1
-#DEBUG_ELFNOTE = 1
-#DEBUG_LINUXBIOS = 1
-#DEBUG_MALLOC = 1
-#DEBUG_MULTIBOOT = 1
-#DEBUG_SEGMENT = 1
-#DEBUG_SYS_INFO = 1
-#DEBUG_TIMER = 1
-#DEBUG_BLOCKDEV = 1
-#DEBUG_PCI = 1
-#DEBUG_VIA_SOUND = 1
-#DEBUG_LINUXLOAD = 1
-#DEBUG_IDE = 1
-#DEBUG_USB = 1
-#DEBUG_ELTORITO = 1
-
-# i386 options
-
-# Loader for standard Linux kernel image, a.k.a. /vmlinuz
-LINUX_LOADER = 1
-
-# Boot FILO from Multiboot loader (eg. GRUB)
-#MULTIBOOT_IMAGE = 1
-
Deleted: buildrom-devel/packages/filo/conf/serengeti_cheetah-Config
===================================================================
--- buildrom-devel/packages/filo/conf/serengeti_cheetah-Config 2008-09-11 19:04:33 UTC (rev 225)
+++ buildrom-devel/packages/filo/conf/serengeti_cheetah-Config 2008-09-12 17:18:00 UTC (rev 226)
@@ -1,99 +0,0 @@
-# !!! NOTE !!!
-# Do NOT add spaces or comments at the end of option lines.
-# It confuses some versions of make.
-
-# Use grub instead of autoboot?
-USE_GRUB = 1
-
-# Grub menu.lst path
-MENULST_FILE = "hda1:/boot/filo/menu.lst"
-
-# time before default menu.lst is chosen. Set to 0 to ignore
-MENULST_TIMEOUT = 0
-
-# Image filename for automatic boot and optional command line parameter
-AUTOBOOT_FILE = "hda1:/vmlinuz root=/dev/hda1 console=tty0 console=ttyS0,115200"
-#AUTOBOOT_FILE = "mem at 0xfff80000"
-#AUTOBOOT_FILE = "hde1 at 0"
-#AUTOBOOT_FILE = "uda1:/vmlinuz.elf"
-
-# Time in second before booting AUTOBOOT_FILE
-AUTOBOOT_DELAY = 2
-
-# Driver for hard disk, CompactFlash, and CD-ROM on IDE bus
-IDE_DISK = 1
-
-# Add a short delay when polling status registers
-# (required on some broken SATA controllers)
-# NOTE: Slows down access significantly, so disable
-# whenever possible.
-#IDE_DISK_POLL_DELAY = 1
-
-# Use PCMCIA compact flash on Via Epia MII10000 and MII6000E
-# This device is referred to as hde.
-#PCMCIA_CF = 1
-
-# Driver for USB Storage
-# USB_DISK = 1
-
-# VGA text console
- VGA_CONSOLE = 1
- PC_KEYBOARD = 1
-
-# Serial console
-SERIAL_CONSOLE = 1
-SERIAL_IOBASE = 0x3f8
-# if SERIAL_SPEED is commented out, the speed will not be changed.
-#SERIAL_SPEED = 115200
-
-# Filesystems
-FSYS_EXT2FS = 1
-FSYS_FAT = 1
-#FSYS_JFS = 1
-#FSYS_MINIX = 1
-FSYS_REISERFS = 1
-#FSYS_XFS = 1
-FSYS_ISO9660 = 1
-
-# Support for boot disk image in bootable CD-ROM (El Torito)
-ELTORITO = 1
-
-# PCI support
-SUPPORT_PCI = 1
-
-# Enable this to scan PCI busses above bus 0
-# AMD64 based boards do need this.
-PCI_BRUTE_SCAN = 1
-
-# Sound support (needs SUPPORT_PCI)
-#SUPPORT_SOUND = 1
-
-# Sound drivers
-#VIA_SOUND = 1
-
-# Debugging
-#DEBUG_ALL = 1
-#DEBUG_ELFBOOT = 1
-#DEBUG_ELFNOTE = 1
-#DEBUG_LINUXBIOS = 1
-#DEBUG_MALLOC = 1
-#DEBUG_MULTIBOOT = 1
-#DEBUG_SEGMENT = 1
-#DEBUG_SYS_INFO = 1
-#DEBUG_TIMER = 1
-#DEBUG_BLOCKDEV = 1
-#DEBUG_PCI = 1
-#DEBUG_VIA_SOUND = 1
-#DEBUG_LINUXLOAD = 1
-#DEBUG_IDE = 1
-#DEBUG_USB = 1
-#DEBUG_ELTORITO = 1
-
-# i386 options
-
-# Loader for standard Linux kernel image, a.k.a. /vmlinuz
-LINUX_LOADER = 1
-
-# Boot FILO from Multiboot loader (eg. GRUB)
-#MULTIBOOT_IMAGE = 1
-
Deleted: buildrom-devel/packages/filo/conf/supermicro-h8dmr-Config
===================================================================
--- buildrom-devel/packages/filo/conf/supermicro-h8dmr-Config 2008-09-11 19:04:33 UTC (rev 225)
+++ buildrom-devel/packages/filo/conf/supermicro-h8dmr-Config 2008-09-12 17:18:00 UTC (rev 226)
@@ -1,50 +0,0 @@
-# Use grub instead of autoboot?
-USE_GRUB = 1
-# Grub menu.lst path
-MENULST_FILE = "hde1:/boot/grub/menu.lst"
-# Driver for hard disk, CompactFlash, and CD-ROM on IDE bus
-IDE_DISK = 1
-# Add a short delay when polling status registers
-# (required on some broken SATA controllers)
-IDE_DISK_POLL_DELAY = 1
-# Driver for USB Storage
-USB_DISK = 1
-# VGA text console
-VGA_CONSOLE = 1
-PC_KEYBOARD = 1
-# Enable the serial console
-SERIAL_CONSOLE = 1
-# Serial console; real external serial port
-SERIAL_IOBASE = 0x3f8
-SERIAL_SPEED = 115200
-# Filesystems
-FSYS_EXT2FS = 1
-FSYS_ISO9660 = 1
-# Support for boot disk image in bootable CD-ROM (El Torito)
-ELTORITO = 1
-# PCI support
-SUPPORT_PCI = 1
-# Enable this to scan PCI busses above bus 0
-# AMD64 based boards do need this.
-PCI_BRUTE_SCAN = 1
-# Loader for standard Linux kernel image, a.k.a. /vmlinuz
-LINUX_LOADER = 1
-
-# Debugging
-#DEBUG_ALL = 1
-#DEBUG_ELFBOOT = 1
-#DEBUG_ELFNOTE = 1
-#DEBUG_LINUXBIOS = 1
-#DEBUG_MALLOC = 1
-#DEBUG_MULTIBOOT = 1
-#DEBUG_SEGMENT = 1
-#DEBUG_SYS_INFO = 1
-#DEBUG_TIMER = 1
-#DEBUG_BLOCKDEV = 1
-#DEBUG_PCI = 1
-#DEBUG_VIA_SOUND = 1
-#DEBUG_LINUXLOAD = 1
-#DEBUG_IDE = 1
-#DEBUG_USB = 1
-#DEBUG_ELTORITO = 1
-
Deleted: buildrom-devel/packages/filo/conf/tyan-generic-Config
===================================================================
--- buildrom-devel/packages/filo/conf/tyan-generic-Config 2008-09-11 19:04:33 UTC (rev 225)
+++ buildrom-devel/packages/filo/conf/tyan-generic-Config 2008-09-12 17:18:00 UTC (rev 226)
@@ -1,50 +0,0 @@
-# Use grub instead of autoboot?
-USE_GRUB = 1
-# Grub menu.lst path
-MENULST_FILE = "hda1:/boot/grub/menu.lst"
-# Driver for hard disk, CompactFlash, and CD-ROM on IDE bus
-IDE_DISK = 1
-# Add a short delay when polling status registers
-# (required on some broken SATA controllers)
-IDE_DISK_POLL_DELAY = 1
-# Driver for USB Storage
-USB_DISK = 1
-# VGA text console
-VGA_CONSOLE = 1
-PC_KEYBOARD = 1
-# Enable the serial console
-SERIAL_CONSOLE = 1
-# Serial console; real external serial port
-SERIAL_IOBASE = 0x3f8
-SERIAL_SPEED = 115200
-# Filesystems
-FSYS_EXT2FS = 1
-FSYS_ISO9660 = 1
-# Support for boot disk image in bootable CD-ROM (El Torito)
-ELTORITO = 1
-# PCI support
-SUPPORT_PCI = 1
-# Enable this to scan PCI busses above bus 0
-# AMD64 based boards do need this.
-PCI_BRUTE_SCAN = 1
-# Loader for standard Linux kernel image, a.k.a. /vmlinuz
-LINUX_LOADER = 1
-
-# Debugging
-#DEBUG_ALL = 1
-#DEBUG_ELFBOOT = 1
-#DEBUG_ELFNOTE = 1
-#DEBUG_LINUXBIOS = 1
-#DEBUG_MALLOC = 1
-#DEBUG_MULTIBOOT = 1
-#DEBUG_SEGMENT = 1
-#DEBUG_SYS_INFO = 1
-#DEBUG_TIMER = 1
-#DEBUG_BLOCKDEV = 1
-#DEBUG_PCI = 1
-#DEBUG_VIA_SOUND = 1
-#DEBUG_LINUXLOAD = 1
-#DEBUG_IDE = 1
-#DEBUG_USB = 1
-#DEBUG_ELTORITO = 1
-
Deleted: buildrom-devel/packages/filo/conf/tyan-s2881-Config
===================================================================
--- buildrom-devel/packages/filo/conf/tyan-s2881-Config 2008-09-11 19:04:33 UTC (rev 225)
+++ buildrom-devel/packages/filo/conf/tyan-s2881-Config 2008-09-12 17:18:00 UTC (rev 226)
@@ -1,50 +0,0 @@
-# Use grub instead of autoboot?
-USE_GRUB = 1
-# Grub menu.lst path
-MENULST_FILE = "hda1:/boot/grub/menu.lst"
-# Driver for hard disk, CompactFlash, and CD-ROM on IDE bus
-IDE_DISK = 1
-# Add a short delay when polling status registers
-# (required on some broken SATA controllers)
-IDE_DISK_POLL_DELAY = 1
-# Driver for USB Storage
-USB_DISK = 1
-# VGA text console
-VGA_CONSOLE = 1
-PC_KEYBOARD = 1
-# Enable the serial console
-SERIAL_CONSOLE = 1
-# Serial console; real external serial port
-SERIAL_IOBASE = 0x3f8
-SERIAL_SPEED = 115200
-# Filesystems
-FSYS_EXT2FS = 1
-FSYS_ISO9660 = 1
-# Support for boot disk image in bootable CD-ROM (El Torito)
-ELTORITO = 1
-# PCI support
-SUPPORT_PCI = 1
-# Enable this to scan PCI busses above bus 0
-# AMD64 based boards do need this.
-PCI_BRUTE_SCAN = 1
-# Loader for standard Linux kernel image, a.k.a. /vmlinuz
-LINUX_LOADER = 1
-
-# Debugging
-#DEBUG_ALL = 1
-#DEBUG_ELFBOOT = 1
-#DEBUG_ELFNOTE = 1
-#DEBUG_LINUXBIOS = 1
-#DEBUG_MALLOC = 1
-#DEBUG_MULTIBOOT = 1
-#DEBUG_SEGMENT = 1
-#DEBUG_SYS_INFO = 1
-#DEBUG_TIMER = 1
-#DEBUG_BLOCKDEV = 1
-#DEBUG_PCI = 1
-#DEBUG_VIA_SOUND = 1
-#DEBUG_LINUXLOAD = 1
-#DEBUG_IDE = 1
-#DEBUG_USB = 1
-#DEBUG_ELTORITO = 1
-
Deleted: buildrom-devel/packages/filo/conf/tyan-s2882-Config
===================================================================
--- buildrom-devel/packages/filo/conf/tyan-s2882-Config 2008-09-11 19:04:33 UTC (rev 225)
+++ buildrom-devel/packages/filo/conf/tyan-s2882-Config 2008-09-12 17:18:00 UTC (rev 226)
@@ -1,50 +0,0 @@
-# Use grub instead of autoboot?
-USE_GRUB = 1
-# Grub menu.lst path
-MENULST_FILE = "hda1:/boot/grub/menu.lst"
-# Driver for hard disk, CompactFlash, and CD-ROM on IDE bus
-IDE_DISK = 1
-# Add a short delay when polling status registers
-# (required on some broken SATA controllers)
-IDE_DISK_POLL_DELAY = 1
-# Driver for USB Storage
-USB_DISK = 1
-# VGA text console
-VGA_CONSOLE = 1
-PC_KEYBOARD = 1
-# Enable the serial console
-SERIAL_CONSOLE = 1
-# Serial console; real external serial port
-SERIAL_IOBASE = 0x3f8
-SERIAL_SPEED = 115200
-# Filesystems
-FSYS_EXT2FS = 1
-FSYS_ISO9660 = 1
-# Support for boot disk image in bootable CD-ROM (El Torito)
-ELTORITO = 1
-# PCI support
-SUPPORT_PCI = 1
-# Enable this to scan PCI busses above bus 0
-# AMD64 based boards do need this.
-PCI_BRUTE_SCAN = 1
-# Loader for standard Linux kernel image, a.k.a. /vmlinuz
-LINUX_LOADER = 1
-
-# Debugging
-#DEBUG_ALL = 1
-#DEBUG_ELFBOOT = 1
-#DEBUG_ELFNOTE = 1
-#DEBUG_LINUXBIOS = 1
-#DEBUG_MALLOC = 1
-#DEBUG_MULTIBOOT = 1
-#DEBUG_SEGMENT = 1
-#DEBUG_SYS_INFO = 1
-#DEBUG_TIMER = 1
-#DEBUG_BLOCKDEV = 1
-#DEBUG_PCI = 1
-#DEBUG_VIA_SOUND = 1
-#DEBUG_LINUXLOAD = 1
-#DEBUG_IDE = 1
-#DEBUG_USB = 1
-#DEBUG_ELTORITO = 1
-
Deleted: buildrom-devel/packages/filo/conf/tyan-s2891-Config
===================================================================
--- buildrom-devel/packages/filo/conf/tyan-s2891-Config 2008-09-11 19:04:33 UTC (rev 225)
+++ buildrom-devel/packages/filo/conf/tyan-s2891-Config 2008-09-12 17:18:00 UTC (rev 226)
@@ -1,50 +0,0 @@
-# Use grub instead of autoboot?
-USE_GRUB = 1
-# Grub menu.lst path
-MENULST_FILE = "hda1:/boot/grub/menu.lst"
-# Driver for hard disk, CompactFlash, and CD-ROM on IDE bus
-IDE_DISK = 1
-# Add a short delay when polling status registers
-# (required on some broken SATA controllers)
-IDE_DISK_POLL_DELAY = 1
-# Driver for USB Storage
-USB_DISK = 1
-# VGA text console
-VGA_CONSOLE = 1
-PC_KEYBOARD = 1
-# Enable the serial console
-SERIAL_CONSOLE = 1
-# Serial console; real external serial port
-SERIAL_IOBASE = 0x3f8
-SERIAL_SPEED = 115200
-# Filesystems
-FSYS_EXT2FS = 1
-FSYS_ISO9660 = 1
-# Support for boot disk image in bootable CD-ROM (El Torito)
-ELTORITO = 1
-# PCI support
-SUPPORT_PCI = 1
-# Enable this to scan PCI busses above bus 0
-# AMD64 based boards do need this.
-PCI_BRUTE_SCAN = 1
-# Loader for standard Linux kernel image, a.k.a. /vmlinuz
-LINUX_LOADER = 1
-
-# Debugging
-#DEBUG_ALL = 1
-#DEBUG_ELFBOOT = 1
-#DEBUG_ELFNOTE = 1
-#DEBUG_LINUXBIOS = 1
-#DEBUG_MALLOC = 1
-#DEBUG_MULTIBOOT = 1
-#DEBUG_SEGMENT = 1
-#DEBUG_SYS_INFO = 1
-#DEBUG_TIMER = 1
-#DEBUG_BLOCKDEV = 1
-#DEBUG_PCI = 1
-#DEBUG_VIA_SOUND = 1
-#DEBUG_LINUXLOAD = 1
-#DEBUG_IDE = 1
-#DEBUG_USB = 1
-#DEBUG_ELTORITO = 1
-
Modified: buildrom-devel/packages/filo/filo.mk
===================================================================
--- buildrom-devel/packages/filo/filo.mk 2008-09-11 19:04:33 UTC (rev 225)
+++ buildrom-devel/packages/filo/filo.mk 2008-09-12 17:18:00 UTC (rev 226)
@@ -1,13 +1,11 @@
-FILO_URL=svn://coreboot.org/filo/branches/filo-0.5
-FILO_TAG=59
+FILO_URL=svn://coreboot.org/filo/trunk/filo
+FILO_TAG=62
FILO_DIR=$(BUILD_DIR)/filo
FILO_SRC_DIR=$(FILO_DIR)/svn
FILO_STAMP_DIR=$(FILO_DIR)/stamps
FILO_LOG_DIR=$(FILO_DIR)/logs
-FILO_PATCHES=$(PACKAGE_DIR)/filo/patches/make.patch
-
ifeq ($(CONFIG_VERBOSE),y)
FILO_FETCH_LOG=/dev/stdout
FILO_BUILD_LOG=/dev/stdout
@@ -22,6 +20,8 @@
ifeq ($(shell if [ -f $(PACKAGE_DIR)/filo/conf/customconfig--$(PAYLOAD)--$(COREBOOT_VENDOR)-$(COREBOOT_BOARD) ]; then echo 1; fi),1)
FILO_CONFIG = customconfig--$(PAYLOAD)--$(COREBOOT_VENDOR)-$(COREBOOT_BOARD)
+else
+ FILO_CONFIG = $(FILO_SRC_DIR)/configs/defconfig
endif
$(SOURCE_DIR)/$(FILO_TARBALL):
@@ -35,28 +35,28 @@
@ tar -C $(FILO_DIR) -zxf $(SOURCE_DIR)/$(FILO_TARBALL)
@ touch $@
-$(FILO_STAMP_DIR)/.patched: $(FILO_STAMP_DIR)/.unpacked
- @ echo "Patching filo..."
- @ $(BIN_DIR)/doquilt.sh $(FILO_SRC_DIR) $(FILO_PATCHES)
- @ touch $@
+#$(FILO_STAMP_DIR)/.patched: $(FILO_STAMP_DIR)/.unpacked
+# @ echo "Patching filo..."
+# @ $(BIN_DIR)/doquilt.sh $(FILO_SRC_DIR) $(FILO_PATCHES)
+# @ touch $@
-$(FILO_STAMP_DIR)/.configured: $(FILO_STAMP_DIR)/.patched
- @ make -C $(FILO_SRC_DIR) config > $(FILO_BUILD_LOG) 2>&1
- @ cp $(PACKAGE_DIR)/filo/conf/$(FILO_CONFIG) $(FILO_SRC_DIR)/Config
+$(FILO_STAMP_DIR)/.configured: $(FILO_STAMP_DIR)/.unpacked
+ @ cp $(FILO_CONFIG) $(FILO_SRC_DIR)/.config
+ @ make -C $(FILO_SRC_DIR) oldconfig > $(FILO_BUILD_LOG) 2>&1
+ @ mkdir -p $(OUTPUT_DIR)/config/filo
+ @ cp $(FILO_SRC_DIR)/.config $(OUTPUT_DIR)/config/filo/config
@ touch $@
-$(FILO_SRC_DIR)/filo.elf: $(FILO_STAMP_DIR)/.configured
- @ echo "Building filo..."
+$(FILO_SRC_DIR)/build/filo.elf: $(FILO_STAMP_DIR)/.configured
ifeq ($(findstring customconfig,$(FILO_CONFIG)),customconfig)
- @ echo "Using custom config $(PACKAGE_DIR)/filo/conf/$(FILO_CONFIG)"
+ @ echo "Using custom config $(FILO_CONFIG)"
endif
- @ make -C $(FILO_SRC_DIR) filo.elf > $(FILO_BUILD_LOG) 2>&1
- @ mkdir -p $(OUTPUT_DIR)/config/filo
- @ cp $(FILO_SRC_DIR)/Config $(OUTPUT_DIR)/config/filo/
+ @ echo "Building filo..."
+ @ make -C $(FILO_SRC_DIR) > $(FILO_BUILD_LOG) 2>&1
-$(FILO_STAMP_DIR)/.copied: $(FILO_SRC_DIR)/filo.elf
+$(FILO_STAMP_DIR)/.copied: $(FILO_SRC_DIR)/build/filo.elf
@ mkdir -p $(shell dirname $(PAYLOAD_ELF))
- @ cp $(FILO_SRC_DIR)/filo.elf $(PAYLOAD_ELF)
+ @ cp $(FILO_SRC_DIR)/build/filo.elf $(PAYLOAD_ELF)
@ touch $@
$(FILO_STAMP_DIR) $(FILO_LOG_DIR):
@@ -87,8 +87,8 @@
@ echo
else
@ echo "Configure filo..."
- @ $(MAKE) -C $(FILO_SRC_DIR) config
- @ cp -f $(FILO_SRC_DIR)/Config $(PACKAGE_DIR)/filo/conf/customconfig--$(PAYLOAD)--$(COREBOOT_VENDOR)-$(COREBOOT_BOARD)
+ @ $(MAKE) -C $(FILO_SRC_DIR) menuconfig
+ @ cp -f $(FILO_SRC_DIR)/.config $(PACKAGE_DIR)/filo/conf/customconfig--$(PAYLOAD)--$(COREBOOT_VENDOR)-$(COREBOOT_BOARD)
@ echo
@ echo "Your custom FILO config has been saved as "
@ echo " $(PACKAGE_DIR)/filo/conf/customconfig--$(PAYLOAD)--$(COREBOOT_VENDOR)-$(COREBOOT_BOARD)"
More information about the coreboot
mailing list