[coreboot] [PATCH] flashrom: README / manpage fixes
Paul Menzel
paulepanter at users.sourceforge.net
Thu Apr 2 08:46:05 CEST 2009
Dear Uwe,
I found one typo.
Am Mittwoch, den 01.04.2009, 03:45 +0200 schrieb Uwe Hermann:
> Index: flashrom.8
> ===================================================================
> --- flashrom.8 (Revision 4038)
> +++ flashrom.8 (Arbeitskopie)
> @@ -1,14 +1,17 @@
> .TH FLASHROM 8 "January 5, 2009"
> .SH NAME
> -flashrom \- a universal BIOS/ROM/flash programming utility
> +flashrom \- utility for reading, writing, and erasong BIOS/ROM/flash chips
s/erasong/erasing/
> .SH SYNOPSIS
> .B flashrom \fR[\fB\-rwvEVfLhR\fR] [\fB\-c\fR chipname] [\fB\-s\fR exclude_start] [\fB\-e\fR exclude_end]
> [\fB-m\fR vendor:part] [\fB-l\fR file.layout] [\fB-i\fR image_name] [file]
> .SH DESCRIPTION
> .B flashrom
> -is a universal flash programming utility for DIP, PLCC, or SPI flash ROM
> -chips. It can be used to flash BIOS/coreboot/firmware images, for example.
> -.sp
> +is a utility for reading, writing, and erasing flash ROM chips.
> +It's often used to flash BIOS/coreboot/firmware images.
> +.PP
> +It supports a wide range of DIP32, PLCC32, DIP8, and TSOP chips, which use
> +various protocols such as LPC, FWH, parallel flash, or SPI.
> +.PP
> (see
> .B http://coreboot.org
> for details on coreboot)
> @@ -16,17 +19,21 @@
> If no file is specified, then all that happens
> is that flash info is dumped and the flash chip is set to writable.
> .TP
> -.B "\-r, \-\-read"
> -Read flash ROM contents and save them into the given file.
> +.B "\-r, \-\-read <file>"
> +Read flash ROM contents and save them into the given
> +.BR <file> .
> .TP
> -.B "\-w, \-\-write"
> -Write file into flash ROM (default when file is specified).
> +.B "\-w, \-\-write <file>"
> +Write file into flash ROM (default when
> +.B <file>
> +is specified).
> .TP
> -.B "\-v, \-\-verify"
> -Verify the flash ROM contents against the given file.
> +.B "\-v, \-\-verify <file>"
> +Verify the flash ROM contents against the given
> +.BR <file> .
> .TP
> .B "\-E, \-\-erase"
> -Erase the flash ROM device.
> +Erase the flash ROM chip.
> .TP
> .B "\-V, \-\-verbose"
> More verbose output.
> @@ -53,10 +60,11 @@
> Note: This check only works while coreboot is running, and only for those
> boards where the coreboot code supports it.
> .TP
> -.B "\-l, \-\-layout" <layout.file>
> -Read ROM layout from file.
> +.B "\-l, \-\-layout <file>"
> +Read ROM layout from
> +.BR <file> .
> .TP
> -.B "\-i, \-\-image" <name>
> +.B "\-i, \-\-image <name>"
> Only flash image
> .B <name>
> from flash layout.
> @@ -71,6 +79,9 @@
> are listed at
> .BR http://coreboot.org/Flashrom#Supported_mainboards ,
> but the list is not exhaustive, of course.
> +.sp
> +Please let us know if you can verify other boards to work or not work out
> +of the box.
> .TP
> .B "\-h, \-\-help"
> Show a help text and exit.
> Index: README
> ===================================================================
> --- README (Revision 4038)
> +++ README (Arbeitskopie)
> @@ -2,9 +2,12 @@
> Flashrom README
> -------------------------------------------------------------------------------
>
> -Flashrom is a universal flash programming utility for DIP, PLCC, or SPI
> -flash ROM chips. It can be used to flash BIOS/coreboot/firmware images.
> +Flashrom is a utility for reading, writing, and erasing flash ROM chips.
> +It's often used to flash BIOS/coreboot/firmware images.
>
> +It supports a wide range of DIP32, PLCC32, DIP8, and TSOP chips, which use
> +various protocols such as LPC, FWH, parallel flash, or SPI.
> +
> (see http://coreboot.org for details on coreboot)
>
>
> @@ -46,16 +49,17 @@
>
> Exit status
> -----------
> -flashrom exits with 0 on success, 1 on most failures but with 2 if /dev/mem
> +
> +Flashrom exits with 0 on success, 1 on most failures but with 2 if /dev/mem
> (/dev/xsvc on Solaris) can not be opened and with 3 if a call to mmap() fails.
>
>
> coreboot Table and Mainboard Identification
> --------------------------------------------
>
> -Flashrom reads the coreboot table to determine the current mainboard
> -(parse DMI as well in future?). If no coreboot table could be read
> -or if you want to override these values, you can specify -m, e.g.:
> +Flashrom reads the coreboot table to determine the current mainboard. If no
> +coreboot table could be read or if you want to override these values, you can
> +specify -m, e.g.:
>
> $ flashrom -w --mainboard AGAMI:ARUMA agami_aruma.rom
>
> @@ -94,15 +98,6 @@
> ROM layout and the ROM image in one file (cpio, zip or something?).
>
>
> -Disk on Chip support
> ---------------------
> -
> -Disk on Chip support was removed from flashrom in r3382. It had already
> -been disabled by default in flashrom for several years because the code
> -was considered unstable and incomplete. The products intended to work
> -have been End-Of-Lifed by the manufacturer for a long time.
> -
> -
> Supported Flash Chips / Chipsets / Mainboards
> ---------------------------------------------
Thanks,
Paul
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 197 bytes
Desc: Dies ist ein digital signierter Nachrichtenteil
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20090402/17c1faff/attachment.sig>
More information about the coreboot
mailing list