[coreboot] Tyan S2912[Fam10] HTX problem

[Ward Vandewege]

Hi Maximilian,

On Tue, Aug 11, 2009 at 04:12:39PM +0200, Maximilian Thuermer wrote:
> I am trying to get an HTX plug in card running on a Tyan S2912 Fam10 System.
> I tried both Barcelona and Shanghai CPUs and both system setups ended
> booting
> during PCI scanning.

Do you mean *re*booting?

I've seen some of that.

Are you using gcc 3.x or 4.x to compile, and on 32 or 64 bit? 

I've found there are issues with gcc 4.3 (even when built with the nice
coresystems build-your-own-toolchain script). The most reliable compiler for
coreboot in my experience is still gcc 3.4.

Also, are you sure your CONFIG_HT_* settings are correct? I found that
CONFIG_HT_CHAIN_UNITID_BASE really has to be 1 to get a bootable system with
mcp55 on fam10.

Thanks,
Ward. 

-- 
Ward Vandewege <ward at fsf.org>
Free Software Foundation - Senior Systems Administrator