[coreboot] [PATCH] Kill duplicated code in Config.lb

Carl-Daniel Hailfinger c-d.hailfinger.devel.2006 at gmx.net
Fri Aug 28 14:45:29 CEST 2009


r4534 introduced devicetree.cb in every mainboard directory, and 100% of
that content was extracted from Config.lb in the same directory without
eliminating the original contents.

This patch fixes the dupliaction by using include statements.
So far, I only tackled amd/dbm690t because it's the only target I can
run a build+boot test for.
Someone needs to fix the other 110 boards in the tree.

Boot tested.

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006 at gmx.net>

Index: LinuxBIOSv2-asus_m2a-vm/src/mainboard/amd/dbm690t/Config.lb
===================================================================
--- LinuxBIOSv2-asus_m2a-vm/src/mainboard/amd/dbm690t/Config.lb	(Revision 4605)
+++ LinuxBIOSv2-asus_m2a-vm/src/mainboard/amd/dbm690t/Config.lb	(Arbeitskopie)
@@ -134,132 +134,4 @@
 config chip.h
 
 #The variables belong to mainboard are defined here.
-
-#Define gpp_configuration,	A=0, B=1, C=2, D=3, E=4(default)
-#Define vga_rom_address = 0xfff0000
-#Define port_enable, (bit map): GFX(2,3), GPP(4,5,6,7)
-#Define gfx_dev2_dev3, 0: a link will never be established on Dev2 or Dev3,
-#					   1: the system allows a PCIE link to be established on Dev2 or Dev3.
-#Define gfx_dual_slot, 0: single slot, 1: dual slot
-#Define gfx_lane_reversal, 0: disable lane reversal, 1: enable
-#Define gfx_tmds, 0: didn't support TMDS, 1: support
-#Define gfx_compliance, 0: didn't support compliance, 1: support
-#Define gfx_reconfiguration, 0: short reconfiguration, 1(default): long reconfiguration
-#Define gfx_link_width, 0: x16, 1: x1, 2: x2, 3: x4, 4: x8, 5: x12 (not supported), 6: x16
-chip northbridge/amd/amdk8/root_complex
-	device apic_cluster 0 on
-		chip cpu/amd/socket_S1G1
-		device apic 0 on end
-		end
-	end
-	device pci_domain 0 on
-		chip northbridge/amd/amdk8
-			device pci 18.0 on #  southbridge
-				chip southbridge/amd/rs690
-					device pci 0.0 on end # HT  	0x7910
-					device pci 1.0 on  # Internal Graphics P2P bridge 0x7912
-						chip drivers/pci/onboard
-							device pci 5.0 on end	# Internal Graphics 0x791F
-							register "rom_address" = "0xfff00000"
-						end
-					end
-					device pci 2.0 on end # PCIE P2P bridge (external graphics) 0x7913
-					device pci 3.0 off end # PCIE P2P bridge	0x791b
-					device pci 4.0 on end # PCIE P2P bridge 0x7914
-					device pci 5.0 on end # PCIE P2P bridge 0x7915
-					device pci 6.0 on end # PCIE P2P bridge 0x7916
-					device pci 7.0 on end # PCIE P2P bridge 0x7917
-					device pci 8.0 off end # NB/SB Link P2P bridge
-					register "vga_rom_address" = "0xfff00000"
-					register "gpp_configuration" = "4"
-					register "port_enable" = "0xfc"
-					register "gfx_dev2_dev3" = "1"
-					register "gfx_dual_slot" = "0"
-					register "gfx_lane_reversal" = "0"
-					register "gfx_tmds" = "0"
-					register "gfx_compliance" = "0"
-					register "gfx_reconfiguration" = "1"
-					register "gfx_link_width" = "0"
-				end
-				chip southbridge/amd/sb600 # it is under NB/SB Link, but on the same pri bus
-					device pci 12.0 on end # SATA  0x4380
-					device pci 13.0 on end # USB   0x4387
-					device pci 13.1 on end # USB   0x4388
-					device pci 13.2 on end # USB   0x4389
-					device pci 13.3 on end # USB   0x438a
-					device pci 13.4 on end # USB   0x438b
-					device pci 13.5 on end # USB 2 0x4386
-	 				device pci 14.0 on # SM        0x4385
-						chip drivers/generic/generic #dimm 0-0-0
-							device i2c 50 on end
-						end
-						chip drivers/generic/generic #dimm 0-0-1
-							device i2c 51 on end
-						end
-						chip drivers/generic/generic #dimm 0-1-0
-							device i2c 52 on end
-						end
-						chip drivers/generic/generic #dimm 0-1-1
-							device i2c 53 on end
-						end
-					end # SM
-					device pci 14.1 on end # IDE    0x438c
-					device pci 14.2 on end # HDA    0x4383
-					device pci 14.3 on # LPC	0x438d
-						chip superio/ite/it8712f
-							device pnp 2e.0 off #  Floppy
-								io 0x60 = 0x3f0
-								irq 0x70 = 6
-								drq 0x74 = 2
-							end
-							device pnp 2e.1 on #  Com1
-								io 0x60 = 0x3f8
-								irq 0x70 = 4
-							end
-							device pnp 2e.2 off #  Com2
-								io 0x60 = 0x2f8
-								irq 0x70 = 3
-							end
-							device pnp 2e.3 off #  Parallel Port
-								io 0x60 = 0x378
-								irq 0x70 = 7
-							end
-							device pnp 2e.4 off end #  EC
-							device pnp 2e.5 on #  Keyboard
-								io 0x60 = 0x60
-								io 0x62 = 0x64
-								irq 0x70 = 1
-							end
-							device pnp 2e.6 on #  Mouse
-								irq 0x70 = 12
-							end
-							device pnp 2e.7 off #  GPIO, must be closed for unresolved reason.
-							end
-							device pnp 2e.8 off #  MIDI
-								io 0x60 = 0x300
-								irq 0x70 = 9
-							end
-							device pnp 2e.9 off #  GAME
-								io 0x60 = 0x220
-							end
-							device pnp 2e.a off end #  CIR
-						end	#superio/ite/it8712f
-					end		#LPC
-					device pci 14.4 on end # PCI 0x4384
-					device pci 14.5 on end # ACI 0x4382
-					device pci 14.6 on end # MCI 0x438e
-					register "ide0_enable" = "1"
-					register "sata0_enable" = "1"
-					register "hda_viddid" = "0x10ec0882"
-				end	#southbridge/amd/sb600
-			end #  device pci 18.0
-
-			device pci 18.0 on end
-			device pci 18.0 on end
-			device pci 18.1 on end
-			device pci 18.2 on end
-			device pci 18.3 on end
-		end		#northbridge/amd/amdk8
-	end #pci_domain
-end		#northbridge/amd/amdk8/root_complex
-
+include /mainboard/amd/dbm690t/devicetree.cb
Index: LinuxBIOSv2-asus_m2a-vm/src/mainboard/amd/dbm690t/devicetree.cb
===================================================================
--- LinuxBIOSv2-asus_m2a-vm/src/mainboard/amd/dbm690t/devicetree.cb	(Revision 4605)
+++ LinuxBIOSv2-asus_m2a-vm/src/mainboard/amd/dbm690t/devicetree.cb	(Arbeitskopie)
@@ -1,3 +1,14 @@
+#Define gpp_configuration,	A=0, B=1, C=2, D=3, E=4(default)
+#Define vga_rom_address = 0xfff0000
+#Define port_enable, (bit map): GFX(2,3), GPP(4,5,6,7)
+#Define gfx_dev2_dev3, 0: a link will never be established on Dev2 or Dev3,
+#			1: the system allows a PCIE link to be established on Dev2 or Dev3.
+#Define gfx_dual_slot, 0: single slot, 1: dual slot
+#Define gfx_lane_reversal, 0: disable lane reversal, 1: enable
+#Define gfx_tmds, 0: didn't support TMDS, 1: support
+#Define gfx_compliance, 0: didn't support compliance, 1: support
+#Define gfx_reconfiguration, 0: short reconfiguration, 1(default): long reconfiguration
+#Define gfx_link_width, 0: x16, 1: x1, 2: x2, 3: x4, 4: x8, 5: x12 (not supported), 6: x16
 chip northbridge/amd/amdk8/root_complex
 	device apic_cluster 0 on
 		chip cpu/amd/socket_S1G1


-- 
http://www.hailfinger.org/





More information about the coreboot mailing list